How to add managed system in Wily introscope system

Hi All,
Can anyone provide the document on how to add managed system in Wily Introscope?
With Regards
Ashutosh

Hello,
The documentation for WilyIntroscope is located at
http://service.sap.com/diagnostics
> Media Library
Here you can find user guides and installation guides for WilyIntroscope.
But the overview is you install Enterprise Manager on a server that becomes the EM Server and then IS Agents on the managed system. There is an installation guide for EM and this ISAGENT setup is part of managed system setup in Solman_setup.
Your tools to manage are Webview and Workstation, and there is documentation for these at the above mentioned link as well.
Regards,
Paul

Similar Messages

  • J2ee Can't start after JDK upgrade on system with Wily Introscope

    Hello All,
    For one of our portal server java patching is done from java 1.4.2.22 to java 1.4.2.25. And on this server Wily Introscope is installed.As per SAP when ever we upgrade java we need to re-create "AutoProbeConnector.jar" and update the JAVA VM parameters in configtool.
    I know the procedure to re-create "AutoProbeConnector.jar" if the Introscope agent is installed manually .
    Below are the steps to be followed to re-create if it is manual type.
    i)Re-create the AutoProbeConnector.jar file
    >wily>connector
    java -jar CreateAutoProbeConnector.jar -jvm /opt/java1.4 -output
    AutoProbeConnector.jar
    Output file AutoProbeConnector.jar created.
    ii)Setting Java vm parameters through configtool.
    Xbootclasspath/p:/usr/sap/ccms/wily/connectors/AutoProbeConnector.jar:/usr/sap/ccms/wily/Agent.jar
    Dcom.wily.introscope.agentProfile=/usr/sap/ccms/wily/IntroscopeAgent.profile
    -Dcom.wily.introscope.agent.agentName=<AgentName>
    But my systems Introscope agent is created automatically by SDM agent.if this is the case we need to re-execute the Introscope agent setup again to re-create the AutoProbeConnector.jar file.
    Can you any one tell me the procedure to do this activity, if possible with steps and the paths to be followed.
    Classpath parameter file which says it is installed automatically.
    ID27689350.JavaParameters=-Xbootclasspath/p:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.2.3.0-2008-08-11/wily/connec
    tors/AutoProbeConnector.jar:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.2.3.0-2008-08-11/wily/Agent.jar -Dcom.wily.i
    ntroscope.agent.agentName=BPD_JC02_server0 -Dcom.wily.introscope.agentProfile=/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAG
    ENT.7.2.3.0-2008-08-11/wily/IntroscopeAgent.profile -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORB
    Proxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco
    .jarm=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:+UseParNewGC -Xms2048M -X
    X:NewSize=320M -XX:NewSize=320M -XX:HandlePromotionFailure -XX:PrintClassHistogram -XX:HeapDumpOnOutOfMemoryError -XX:DisableExplicitGC -XX:MaxPermSize=256M -XX:PermSize=256
    M -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Drdbms.driverLocation=/oracle/BPD/920_64/jdbc/lib/classes12.jar -Dsys.global.dir=/usr/sap/BPD/SYS/global/

    Hello Jansi,
    Thanks for the update.
    I have gone through the document, and currently i require to update the Introscope Agent via SMD.
    In the document it is mentioned as the navigation
    Launch the Introscope Setup application: Diagnostics Setup > Managed Systems>Introscope Agent.
    These are the below doubts i have.
    1>How should i enter to "Launch the Introscope setup application"
    2>and then followed by Diagnostics setup.
    Kindly help me in detailed navigation, for example to which server i need to login(is it the Enterprise Manager server ?)
    Awaiting your reply.
    best Regards
    Rakesh

  • How to add some days to the current system date

    can anyone help how to add some days to the current date i.e if today is 3-12-2007 and if v add 15 more days then the output should be 18-12-2007

    RajeshChandan wrote:
    First of all thanks a lot ,and coming to the question i dont mean to change the sysdate instead i want to write a prg. where after entering the current date it should effect with the no.of days that i have given but not the system date .if u can answer please reply for thisAh, I see. In that case, you can use an instance of GregorianCalendar and use it's add(...) method to add days, months, years etc. to it.
    http://java.sun.com/javase/6/docs/api/java/util/GregorianCalendar.html
    Good luck.

  • How to add my own button in the system toolbar?

    Hi,
    Is it possible to add my own button in the system toolbar which is linked to one of my own menu item ? I did a little bit search in the forum, all said it is not possible. Can anyone confirm it?
    Thanks,
    Lan

    Hi Lan,
    Your finding is correct. The toolbar is not open to UI API. We do not have any methods to change anything there.
    You may check this if you haven't: Browse Buttons in B1
    Thanks,
    Gordon

  • How to add a pane from DEEP within System Prefs to the dock

    I frequently use my HP Deskjet scanner, and the way I scan stuff is by doing:
    System Prefs > Printers & Scanners > [select the printer] > Scan > Open Scanner...
    Is there a way to essentially record the LAST action, the "Open scanner" mouse-click, and add it to my dock for quick (and instant) scanner access?
    Saving these 15 seconds ten times a day might actually add a week to my life. And please, explain it like I'm 5.

    I cannot help with exactly your question, someone else may.
    However can you not use the Image Capture application, it is supplied with OS X and is in the applications folder, if that scans how you want, just drag it to the Dock for easy access.

  • How to add audio devices under sound in system preferences

    How do I add output audio devices under system preferences --only option listed is internal speakers?
    Macbook help says to change device under sound in system preferences. However, only option listed it the internal
    speaker.
    I need to sound to come from my tv which is hooked via vga cable and audio cable.
    Every thing works but I cannot get sound from tv.

    You are my hero. I'm not very savy when it comes to connections. I had the audio cable hooked up to the audio port which is next to the headphone port on my macbook. After switching the tv was listed just as you said it would. Thanks so much. I'm now a very happy camper.

  • How to add disk to disk group File System in oracle windows

    Hi all
    Please any body can help ... I need to know how can I add disk to disk group
    I have Oralce 11g Database RAC Setup with 2 nodes node1 and node2 , ASM not enabled , Windows OS 2003 , I have shared storage (G, H and O ) My system administrator add additional SAN Storage (R) to my setup, how can I add the new disk to disk group.
    Please help

    I have Oralce 11g Database RAC Setup with 2 nodes node1 and node2 , ASM not enabled , Windows OS 2003 , I have shared storage (G, H and O ) My system administrator add additional SAN Storage (R) to my setup, how can I add the new disk to disk group.If ASM is not enabled that mean, Database is running on normal file system?
    Hi thanks for you help.,,, But my system admnistrator already did thies steps,... I think my question was not clear enough
    I mean after I add the disk group from O.S side what shall I do from Oracle Side? Since From windows explorer I can see the new drive.If the volumes are ready, you can use ASMCA to configure diskgroups.

  • How to add a Tab in Company Detail System Form

    Hi Experts
    I am making a new Tab in Company Detail System form In Accounting Tab after Excise tab. This is tree of Tabs. Accounting Tab has two Sub-Tabs General and Excise. Now this New Tab 'Export' will also be the sub-Tab of Accounting Tab. My code for inserting tab is given below
    If pVal.FormType = "136" Then
                        Dim sysItem As Item
                        Dim SysEdit As Item
                        Dim lbl As StaticText
                        Dim editText As EditText
                        Dim oFolder As Folder
                        sysItem = form.Items.Item("140002039")
                        oItem = form.Items.Add("ExportFD", BoFormItemTypes.it_FOLDER)
                        oItem.Left = sysItem.Left + sysItem.Width
                        oItem.Top = sysItem.Top
                        oItem.Width = sysItem.Width + 20
                        oItem.FromPane = 5
                        oItem.ToPane = 6
                        oFolder = oItem.Specific
                        oFolder.Caption = "Import/Export"
                        oFolder.GroupWith("140002039")
                        sysItem = form.Items.Item("140002040")
                        SysEdit = form.Items.Item("140002041")
                        oItem = form.Items.Add("LDrMfNo", BoFormItemTypes.it_STATIC)
                        oItem.Left = sysItem.Left
                        oItem.Top = sysItem.Top + 65
                        oItem.Width = 120
                        oItem.FromPane = 6
                        oItem.ToPane = 6
                        lbl = oItem.Specific
                        lbl.Caption = "Drug Manufacture Licence No."
                        oItem = form.Items.Add("EDrMfNo", BoFormItemTypes.it_EDIT)
                        oItem.Left = SysEdit.Left
                        oItem.Top = sysItem.Top + 65
                        oItem.Width = SysEdit.Width
                        oItem.FromPane = 6
                        oItem.ToPane = 6
                        editText = oItem.Specific
                        editText.DataBind.SetBound(True, "OADM", "U_DrMfcLNo")
    The tab is added properly It also show labels and  Edit boxes but when I select this tab General and Excise tab is disappeared.
    Plz suggest me what can be the problem
    Thanks
    Best Regards
    Jitender
    Edited by: Jitender Garhwal on Apr 5, 2010 6:28 AM

    Hello,
    Change the ToPane Property of  General and Excise  until your last panelevel (6?)
    The ToPane property of these items is less than your folders panelevel ! This is the problem.
    Regards,
    J

  • How to add new coding mask into productional system

    Hi,
    A new division is entering our system and has a business requirement for a project coding mask C-00000.00.00.00.00 to handle capital investment projects. We would like this proces to make the good example for rolling out project models to the rest of the organisation (and for making new coding masks in the future)
    However, we are facing a problem. Until now only the IT department has been using the project system and they have not had the need for mulitlevel projects or project models.
    IT projects today is entered as free texts like:
    Definition ITINTCOM001-S1003
    WBS       ITINTCOM001-S1003
    with no regard to the coding. Logistics integration is used via networks and MM-SRV.
    I have read in another issue in the forum that I was supposed to be able to enter additional coding masks as long as they did not interfear with existing coding masks. So I tried to transport a new coding mask into the system but it created an error message CJ 610 "Entry length is incorrect B-00000.00.00.00" with a reference to the coding (there are no existing projects using B- or any other coding mask). It also made a system dump when a wbs was searched via F4.
    So I removed the coding again and the system went back to normal.
    Since go-live is closing in I would be highly appreciative if  anybody had a suggestion on how to solve this issue?
    BR
    Allan Albrecht

    In the Node SPRO (T code OPSK) ie., Define Special Characters for Projects, mention '1' in PL field- Length of key for coding (as in your case the key is 'B') and don't check the check box SL. Also don't check the check box 'Edit'.
    For reasons, refer the F1 help on these fields.
    Save this and new coding mask in same request and transport it. Try this and let me us know if it solves the problem.
    You can also refer to note 520944
    Regards
    Sreenivas

  • How to add CD/ Tapr Drv when the system is enable

    Sir is there any body who will help me to solve the problem that when the system is enable and I want to attach the CDROM & Tape Drive to the system what i have to do

    Hello,
    depends on the system and OS version.
    If the CD-ROM and tape-drive are SCSI (on separate channel from the system disk), just attach them and issue devfsadm -C disks; devfsadm -C tapes (Solaris >= 8) or drvconfig; disks; tapes (Solaris < 8)
    If the CD-ROM is IDE, impossible without restart !
    Anyway review the manpages for the above mentioned commands.
    Michael

  • How can I manage four NI5112s in one system?

    Now in system there are four NI5112s.All the NI5112s have the same configuration and all their inputs are connected to the same pulse signal source.All the NI5112s use analog edge triggering and the trigering source is the input signal.So all the NI5112s should be trigered at the same time.However,when I fetch the waveform with the function niScope_Fetch in sequence,I find that the values of wfmInfo.absoluteInitialX vary a lot(10-70ms).why?

    The reason the absoluteInitialX values differ from one board to the next is probably due to the fact they are not armed at the exact same time, so the individual board timestamp clocks start at slightly different times. This is also due to the fact that the boards are running completely independent of each other.
    I have attached an example program that will be available on the Developer Library for High-Speed Digitizers shortly. It is set up to synchronize two boards in PXI, and to increase it to 4 simply expand the slave board array and the additional propogation delay arrays to have 3 inputs (Master board will be the 4th board). Also the VI is setup to have the master board in slot 2 of the chassis and take advantage of the Star Trigger capabilit
    ies of slot 2 in the PXI chassis.
    Let me know if you are using PCI boards and we can see about modifying the code for PCI.
    Good Luck on your project!
    Attachments:
    Multiple_NI_PXI-5112_Synchronization_Demo.llb ‏136 KB

  • Wily Introscope Version for Solution Manager 7 SPS 17

    Hi
    We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
    I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
    On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
    I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
    Looking in the SWDC there are downloads in  SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
    Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
    Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
    Thanks for any help.
    Paul.

    Hi Bhudev
    Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
    As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
    When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
    the first 2 (of 23) setups are failing :
    SSO The value of profile parameter login/accept_sso2_ticket could not be checked
    BI Cannot invoke CCMSBISETUP on host localhost
    Warning :
    User(BI) Role SAP_BI_E2E does not exist
    Then it says :
    To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
    I cannot find this Diagnostics Setup Guide for SP17 ?
    The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
    Thanks,
    Paul.

  • Wily Introscope H/W migration details

    Hi,
    We are going for the hardware migration for our solution manager system. In solution manager host already wily introscope is installed. What steps need to be taken care during the migration so that wily is also migrated to new hardware box.
    Thanks,
    Rohan

    Hello Rohan,
    If your operational system is Windows NT:
    Simple copy is not recommended on Windows NT system, however you can give it a try.
    Copy the directory of /usr/sap/ccms/wilyintroscope to the new box, run script "RegisterEMService.bat" under the directory, goto service.msc to see if Introscope service is there, if so, start the EM service to see if EM is up and running.
    If your operational system is UNIX/AIX:
    Please install a new Wily EM and perform the necessary configuration such as the Java heap size and etc.. Then, please copy the contents under the directory /trace and /data to the corresponding directories of the new Wily EM. As the procedure is similar with the procedure of upgrading from 7.0 to 8.0 EM, please refer to the document 'Wily Installation and Upgrade Guide'.
    You can follow the UNIX steps for Windows NT as well, as it will migrate all the historical data from one box to another.
    Best rgeards,
    Guilherme Balbinot

  • How to add a system into Solution Manager directory.

    Hi!
    Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
    Also,
    How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
    I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
    AM I right?
    regards,
    Pratip Bhattacharyya

    Hi Bratip Bhattacharyya,
    SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
    XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
    But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
    If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
    Bye
    Message was edited by: Riccardo Escher

  • Wily Introscope is not running in Solution Manager 7.1 and tech monitoring

    Hi Experts,
    we are able to log in wily introscope, But metrics(values) are not coming in wily
    we re started the solution manager server, that port is working fine now, Please assist me on this to fix issue find log as attachment.
    2)we configure the technical monitoring in our solution manager system but metrics are not coming for dialog response time in dash board. which extractor i need to check how to troubleshoot,
    thanks in advance for you help
    Best Reg

    Hi Srivastav.
    Actually i am new to solution manager, and we have done basic steps of solution manager like
    system preparation,basic configuration,managed system configuration and technical monitoring,
    in tech monitoring system monitoring,and EUEM and we are planing to perform DVM and RBPD,
    my solution manager system is installed on windows 2008 server, version is 7.1 SP 7,
    currently we facing issue in wily introscope and technical monitoring dash boards metrics are not appearing and please tell me how to close the thread ,
    Best Regards,
    Hanuman

Maybe you are looking for