How to add mod_wl_ssl.so/mod_wl_ssl_raven.so to my apache modules in linux

Hi, all,
I am setting up an Https connection over apache and try to use mod_ssl.so to
bridge with weblogic.
I can make apache(modssl)-weblogic work(proxy all request:http/https to
weblogic 7001 port). No problem.
But i can't get info of my certificate in https connection at my weblogic
server end. I am wondering if I should install mod_wl_ssl.so module instead
of regular mod_wl.so. But I can't find any document of its install
instructment.
Or alternatively, is there any way I can get those ssl relative properties
in apache-weblogic bridge?
Or is it possible to get mod_wl.so source code?
Many thanks in advance!
Xiaodan

Not, not, I CAN get the certificate in weblogic alone. The servlet works
correctly.
My problem is when I access the same servlet via apache proxy, I CAN'T get
the certificate. That's the problem!
Michael Girdley <[email protected]> wrote in message
news:[email protected]..
>
>
We do have the FAQ on this question. It shows you how to get the
certificate out of the requests inside of your WebLogicapplication --check
the documentation for more information.
Michael Girdley
BEA Systems Inc
"Xiaodan Zhu" <[email protected]> wrote in message
news:[email protected]..
Hi, all,
I am setting up an Https connection over apache and try to use
mod_ssl.so
to
bridge with weblogic.
I can make apache(modssl)-weblogic work(proxy all request:http/https to
weblogic 7001 port). No problem.
But i can't get info of my certificate in https connection at my
weblogic
server end. I am wondering if I should install mod_wl_ssl.so moduleinstead
of regular mod_wl.so. But I can't find any document of its install
instructment.
Or alternatively, is there any way I can get those ssl relative
properties
in apache-weblogic bridge?
Or is it possible to get mod_wl.so source code?
Many thanks in advance!
Xiaodan

Similar Messages

How to add License Key For Integration Tool kit For SAP in Linux Server

Dear Experts,
We are Using BO XI R3.1 SP3 Enterprise Version ,Integration Tool Kit For SAP,Live Office.
The Server is Linux Server.
But while generating reports in Infoview it is giving error like ""_check that you are licensed to access SAP Data Source_".
So we came to know that license Key might Expire for Integraton Tool Kit For SAP in Bo Server.
So can you tell me how to add the license key For BO XI R3.1 SP3 Integration Tool Kit For SAP in Linux Server.
Thanks & Regards,
Venkat

On Unix / Linux you should be able to leverage the response from Raphael and change:
Location＝%BOBJDIR%/bobje/data/.bobj/registry/software/business objects/suite 11.5/sap/keycode/.registry
For more information verify the below link
[How do you update the SAP Integration Kit license?;
Regrads
Pardhu

HOW to ADD F4 help to a field on SCREEN (MODULE POOL)

Hi,
     How to add f4 help to a field in screen ..plz help
Regards,
Saleha

Hi Saleha,
                In order to add F4 help to a field in modeule pool follow these steps:-
1. First go to SE11 and create your own search help( if you dont know how to create a search help please feel free to ask me, it is very easy).
2. Now in your module pool program program go to the layout of your screen.
3. Now when you see the attributes of this field in the Dict tab you will find the field Search Help. Now here you can specify the name of the search help you created in SE11.
There is also another mehtod to create the dynamic search help. eg:- in a posted document data get the Document nos related to that company code.
The sample code is like this:-
First of all declare the module below in the flow logic of your screen then create it in your main program.
You declare the module in the PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD TXT_DOCNO MODULE VALUE_BELNR.
You also need to create an internal table where you wil store results of the select query fired below in the module.
here you will get a F4 help on the filed Document Number(TXT_DOCNO) based on the field Company code (TXT_CODCO)
MODULE VALUE_BELNR INPUT.
progname = sy-repid.
dynnum   = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'TXT_CODCO'.
APPEND field_value TO dynpro_values.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname     = 'BKPF'
      fieldname   = 'BUKRS'
      dynpprog    = progname
      dynpnr      = dynnum
      dynprofield = 'TXT_CODCO'.
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            dyname             = progname
            dynumb             = dynnum
            translate_to_upper = 'X'
       TABLES
            dynpfields         = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
SELECT BUKRS BELNR
    FROM BKPF
    INTO CORRESPONDING FIELDS OF TABLE it_doc1
    WHERE BUKRS = field_value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'BELNR'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'TXT_BELNR'
            value_org   = 'S'
       TABLES
            value_tab   = it_doc1.
ENDMODULE.                 " VALUE_BELNR INPUT
Hope you find this information useful, let me know.
Regards,
Aditya.

How to add Currency field with dropdown on screen layout (module pool)

I need to add a field called Currency( field label ) with dropdown (like SKB1-WAERS). 
The field label and input output field should default as being hidden and
sould be visible only when other field value ( on the same screen ) should match with the value in the database table .
Could you please suggest me how to create dropdown
and give this functionality with coding ?
Thanks in advance.

Hi,
In the field attributes of the SKB1-WAERS..in the group attributes..give a group name G1..Add the same G1 for the field lable also.
Then in the PBO of the screen..
***Check the conditions..when other field value (on the same screen) matches
***with the value in the database table.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'G1'.
 SCREEN-INPUT = '0'.
 SCREEN-INVISIBLE = '1'.
 MODIFY SCREEN.
ENDIF.
ENDLOOP.
Thanks,
Naren

How to add new operand in installation facts through FMs

Hi,
Please guide me for the following query:
How to add new operands in installation facts through Function Module?
Please guide me with any function module through which i can acheive the above requirement.
Thanks and Regards

Hi,
Thanks for your reply please.
Through the BAPI which you have specified i have not been able to add any new operand in the installation facts.
Please guide me with the parameters which are required to be passed to create a new operand entry in the installation facts.
Please guide.
Thanks and Regards
Edited by: MP Vashishth on Aug 11, 2011 1:43 PM

How to add fields to already loaded cube or dso and how to fill records in

how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?

This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382

How to add a library (libSomeRandomlib.so) to a project....??

Ok, so I've been trying to get CERN's ROOT program/libraries to work in an xcode project for a while, but I'm running into one really weird error, and I think I may just not know how to add a library to a project correctly.
Suppose I create a new Xcode C++ command line tool project. I hit Build and go, and it gives me a nice little Hello World! in the console, just as it should. If I then click on the project in Groups & Files, go to Project>Add to Project..., and choose, say, libCint.so, from my root/lib directory, and click ok, then click Build & Go, I get an error in the console:
dyld: Library not loaded: @rpath/libCint.so
Referenced from: /Users/paulthompson/Documents/Programming/Build Products/Debug/LibraryIncludeTest
Reason: image not found
sharedlibrary apply-load-rules all
Data Formatters temporarily unavailable, will re-try after a 'continue'. (Cannot call into the loader at present, it is locked.)
My assumption is that either I'm missing a step in the process of adding a library, or else there is something jacked up with the libraries themselves. Anyone have any advice?
Thanks,
Paul
EDIT* Oh, I should mention that the actuall binary that gets built after adding the library WILL execute properly in the Finder, or from terminal, just not with the Build & Go, or Go commands from within xcode.
Message was edited by: TraxusIV

TraxusIV wrote:
Results of otool:
LibraryIncludeTest:
@rpath/libCint.so (compatibility version 0.0.0, current version 0.0.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 123.0.0)
Macintosh-9:Debug paulthompson$ otool -L /Applications/CERNRoot/root/lib/libCint.so
/Applications/CERNRoot/root/lib/libCint.so:
@rpath/libCint.so (compatibility version 0.0.0, current version 0.0.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.2.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0)
I honestly don't know much about @rpath. I found this page that explains it a bit more: http://blogs.sun.com/dipol/entry/dynamiclibraries_rpath_andmac
So, since I don't want to deploy with the environment variable set, I should ask, what IS the correct, MacOS X way to do it?
The best way to find that is to look at how Apple does it. They put frameworks in /System/Library/Frameworks and regular shared libraries in the standard places. You can do the same. Put your frameworks into /Library/Frameworks and your shared libraries into /usr/local-based paths.
If you want to create stand-alone executables that can be installed via drag-n-drop, you can put shared libraries inside the application bundle. If your shared libraries/frameworks are elsewhere, you will need some sort of installer to get them installed.
I've been sifting through Apple's developer documentation but I have yet to find a concise, straightforward explanation of how to add shared libraries. I'm horribly confused at this point. Is there a good tutorial available anywhere for both the general unix case of linking to dylibs and .so's, and the Mac specific case?
Hopefully someone else knows an answer for this one.
*EDIT* I do already have the variable defined both in ~/.MacOS/environment.plist and also in Xcode as an additional user variable.
I'm not sure about the whole RPATH thing. Setting environment.plist will define environment variables for use in the Finder, but that is really a hack. There are better ways to do it, but if you are porting some open-source programs, that may be the only way. You should be able to define those variables in Xcode. You have to selected the debug executable under "Exectuables"

How to add A single row at the middle of the table in a Webi report

Hi,
I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
Thanks in advance
Regards
Monika

Hi Monika,
It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
Can you explain in more detail what you are trying to do?
Thanks

How to create a job card and how to add waranty card in sales order

I have one scenario for CS.the scenario is realted to automotive industry. Basically its a trading industry of HCV,MCV,LCV apart from that they will do servicing also. First the customer comes for a service.he is having free services. he will have waranty for spare parts of the vehicle. once he comes for servicing first the executive will take complains from the customer after that a Job card will be issued to the customer. there his chasis no ,engine no and registration no will be there. once enter the chasis no entire customer details has to come. how many free services he is having for how many kilo meters.then job card will go to the spare parts dept.that dept will issue the spare parts.then they will invoice the customer. he will pay the payment.and finally the gate pass will be given to the customer to deliver the vehicle.
painful area is how to create a job card and how to add waranty in sales order.
Regards,
Venkat

Hi,
Have u resolved it then Please let me know !!! It is a very interesting problem and owuld like to know the solution...
Regards
Krishna

How to add apache to an exisitng BOXI31 presently running on IIS

Hi Tim,
I know its rude that I directly mailed you but i am not able to post on the SAP forum due to some reasons I don't know. So please if you can help me I would be highly indebted.
I have a multiple server installation.
Number of Servers : 4
Number of CMS : 2
Application tier on 2 servers.
Web tier on 2 servers.
The problem is when i login my .NET infoview works fine but my Java infoview doesn't.
I found the error that the CCM doesn't have Tomcat Apache Server.
So my guess is thats the reason why the java infoview is not working.
Please help how to add the Apache to the CCM.
Regards
Sid

Hi,
You need to run custom installation to install Java Web components on your server box and choose to install
tomcat app server
- Subhodeep

How to add description of a column of a table in SQL Azure

Hi
I have some tables in my application database where there are descriptions added against certain columns. Needless to say they were done by using sp_addextendedproperty.
Now I am trying to migrate the Database to SQL Azure. SQL Azure does not support sp_addextendedproperty.
Hence I am not able to figure out how to add descriptions to those columns.
Any help would be much appreciated.
Thanks
Soumyadeb

Hello,
Just as Latheesh post above, Windows Azure SQL database are not support extended stored procedures. That’s one of the limitations on SQL database, and I don’t know there is another way to achieve the same on Azure.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

How to add more fields at level task for importing to MsProject

Hi everyone,
We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need.
The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available fields and then we don't find the same amount for importing (34). So, in some cases we don't find fields which were configurated for exporting and it is no posible to upload the information back because the field is no available for importing.
Does anyone knows how to add more fields for importing at the cProjects side?
Thanks a lot,
CAMILO URIBE

Some fields can not be migrated because of MsProject designe. The above is the reason why cProjects' customizing does not offer the
mapping of the same nuember of fields.

How to ADD field in iview ?

hi,
in portal-iview i want to add a field.
when i go to 'portal-content -> open the iview with right click -> preview' and then
do ctrl-alt-right-mouse click i got to the customizing of the fields.
i know how to HIDE fields there, but i don't know how to add fields ? in the list
of the fields the necessary fields are available, BUT i only have to options:
hide -> YES or NOT PERSONALIZED
any ideas ?
reg, Martin

Gopal,
the root element of this fields does NOT have the option 'decorate'.
it is the quoata overview of ESS : sap.com/ess~quotas
the top of the tree has option 'decorate', but this is above the necessary table where
i select the data.
my adrl is
martin.svik(at)denzel.at
maybe we can 'change' some screenshots where you can send me yours and i can
send you mine to explain it in a better way
reg, Martin

How to add more drop zones or movies in an idvd menu

I was building a dvd in idvd and ran out of drop zones to fill but I couldn't figure out how to add more drop zones.
I tried different templates but I could find none that had more than 12 drop zones.
Then I was adding movies to the main menu and idvd refused to allow more movies added when I reached 10 movies. It said that the template did not accept more movies.
I tried a few other templates and could not get it to accept more.
I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
Is there some way to add more than the default drop zones in an idvd template and to add more movies in a menu without having to use submenus?
Thanks for any advice.

I couldn't figure out how to add more drop zones
Sorry, the templates 'are what they are'.
I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
You need to figure out how to work with what is available.
If you want more freedom, buy Apple's Final Cut Studio and learn to use DVD Studio Pro.

How to add a gradient or 50% transparent fill to an .ai imported path?

Hello All;
I need some help. My task sounds simple enough but not sure how to accomplish it.
I created the following path in Illustrator (See attached illustration - the top one). This is actually for a lower-third graphic.
I have been successful at importating that into .ai. Though should I be using a solid or a shape layer or doesn't it matter ?
I can add a stroke which affects the color and thickness of the outlines OK.
However, I can't figure out how to add either a gradient fill or one that is 50% transparent ? Can anyone help ?
Oh ... I'll mention I'm using After Effects CS3.
Thanks.
Tim

Rick;
I've used Illustrator for quite a while both at home and at work but I really havn't had to do anything that complex yet. Same goes for Photoshop. I bought DVD tutorials for most of the productivity software I use and when you gave your first explanation, I watched the DVD tutorial on Importing into AE so I know what you're referring to when you say to import as composition. So far, I've only tried to import into AE by copying and pasting. I think that's why I just got the path and not the background. I'll try importing a composition shortly and see if I get the fill too. I actually found a tutorial on making the type of shape I need to in Photoshop so maybe I'll try that instead of Illustrator and then import that into AE.
Btw - It may not actually be a gradient fill I need to use but instead a solid fill with the top half lighter and buttom half darker.
In case you're interested, here's actually what I'm trying to create for a video project. I could actually buy the animation for $8 but I figured that this can't be that difficult and I need to learn this stuff anyway ... http://videohive.net/item/lower-third-15-different-colour-schemes/145337?WT.ac=category_th umb&WT.seg_1=category_thumb&WT.z_author=berol
Tim

How to add mod_wl_ssl.so/mod_wl_ssl_raven.so to my apache modules in linux

Similar Messages

Maybe you are looking for