How to add more audio tracks to my environment ? i forgot !!

Hi. I dont see this in the Logic Ref guide.
In my previous autoload (made through the initial setup assistant) , i had selected 24 audio tracks. My current project requires more tracks , how can i add more tracks to the environment in this project.
I havent done this in so long , i forgot.
In the Environment , i choose AUDIO layer , then New Audio Object , i'm lost from here on.....
Please help. I'll try and find this in the manual aswell.
Thanks a lot
Faisal

Hi
If you want to do it the easy way:
Go to the arrange page, go to the smaller menu labelled 'Track' and select 'create multiple' then choose what you want (mono, stereo or audio instrument). Voila.
This will add the extra tracks to your environment too. If it doesn't happen then check your audio preferences for max number of audio tracks and adjust accordingly.
Del

Similar Messages

  • How to add an audio track without scaling?

    I have a 3 minute audio track that I want to add to at a beginning of my 4 minute video clip. I "select all" from my audio mov file, I switch to my main video mov file and the insertion head is at the beginning. When I select "Add to movie" my movie file is now 7 minutes long. The picture is frozen at the beginning of the movie for 3 minutes while the audio is playing...
    I tried moving the insertion input and output and used the "add to selection and scale" command, but it distorts the audio file since the audio file is actually a few hundredth of a second longer.
    Is there any way to copy-paste an audio track without scaling?
    What I want in the end is a 4 minute video clip with just the first 3 minutes with my audio track.

    Bump

  • HOW TO ADD MULTIPLE AUDIO TRACKS - iMovie '11

    I'm having trouble adding multiple audio tracks in iMovie 11.  I already have an audio track embedded with the video and a separate music track under.  I wish to extend the music track further but need to cut it off at a certain point.  I tried just adding the 2nd music track under the first but when I 'drop' the track it doesn't show up anywhere.  Any ideas or work arounds will be helpful.  Thanks.

    Hana wrote:
    ...   I tried just adding the 2nd music track under the first but when I 'drop' the track it doesn't show up anywhere.  ...
    you have to drag the music-clip onto a video-clip - then, iM will add it automatically upon/under the other ones ...

  • How to play multiple audio tracks simultaneously?

    Hi there,
    I am having problem with playing multiple audio tracks. I want to play 2 or more audio tracks at exact time (without delay) - is it possible? how can it be done?

    So, essentially, you're trying to take a recording of say, a singer and a guitar player, and end up with the singer in one file and the guitar in the other. Got it.
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/Merge.html]
    That sample will merge multiple input files into a single file. Because you want to play the files together rather than save them, just take the sample and strip out all of the DataSink stuff, and add the following line right after the Processor "outputProcessor" is realized...
    outputProcessor.setContentDescriptor(null);
    So, it'll make the following revision to the code:
         // Create the output processor
         ProcessorModel outputPM = new MyPMOut(merger);
         try {
             outputProcessor = Manager.createRealizedProcessor(outputPM);
                        outputProcessor.setContentDescriptor(null);
             outputDataSource = outputProcessor.getDataOutput();
         } catch (Exception exc) {
             System.err.println("Failed to create output processor: " + exc);
             System.exit(-1);
         }That'll make the outputProcessor play the file, as if it was a Player object. You won't have any visual controls, but if you need visual controls, then don't do that, and just create a Player object to play the outputDataSource.

  • Four or more audio tracks

    Does Quick Time support more than 2 tracks of audio? I want to create split track masters of videos I make with separate audio on their own tracks. Can this be done either with FCP or Avid?

    Yes, QT can support multiple audio tracks, as long as you use "Save" or "Save As" to save the result. If they start at the same point on the timeline they will all play when you play the clip. Once you choose to export to some other format they will all be collapsed to a single audio track within which they all play at once.
    I can't speak for FCP or Avid but this works with QT Player Pro. To add additional audio tracks to an existing QT document you must first copy the entire audio track to the clip board, then switch to the target document and use Add. A new track will be added which starts at the point on the timeline where you have positioned the play head. Each time you do this a new track is added. In my test document I only went up to 4 tracks (plus a single video track) but I am sure you could add even more if desired.
    One final point. QT Player allows you to separately enable or disable separate video and audio tracks by use of the Enable Tracks item in the Edit menu.

  • Add Multi-Audio Track Ability to Flash Export

    When authoring DVDs and Blu-ray disks we have options to add alternate audio tracks which the user can select on the fly or we can add menu options for their selection. This ability is absent in flash exports from CS3.

    Hi
    Not in iMovie as standard (only two alt. - Pic in Pic or Side by Side)
    Work around:
    • Create the MultiClip in QuickTime Player Pro - and import this - or -
    • Create first Pic in Pick as a new iMovie project
    - Export this as a full quality QT.mov
    - Import this into a New Project
    - Add one more Pic
    - Export / Import / Add - and so om
    • Use FinalCut Pro instead - all things like this is so much easier
    Yours Bengt W

  • How to add more than one clip to a drop zone?  New guy

    Hey all, I'm new to DVD studio and I'm trying to fiqure out how to add more than one clip to a Template drop zone. I'm using a 6 button template. I've named each button .. Football, Baseball, Hockey ...etc.
    How can put in MORE THAN ONE CLIP in the Football track/drop zone. So when someone clicks on Football they can see 3 examples.
    Do I need to create something to link to that Football button?
    Any replies appreciated

    You can edit the segments to be used in FCP or Motion so that the asset drop in has three examples
    Another way (if you want) is to make the entire menu outside of DVD SP so that the background layer is an m2v and the items are revealed/masked to some degree
    Take a look towards the bottom of this thread http://discussions.apple.com/thread.jspa?messageID=2951183&#2951183 where I discuss http://www.dvdstepbystep.com/Overmovies.zip
    Note that you can also use a basic overlay to do this. The overlay would be just solid black instead of the arrows/circles things I use in that example.
    For instance make the text one color and the box over the movie another (You can make it blue and the box red lets say) Draw a region over both for the button. Map blue for highlights/transparencies for normall/selected/activated and the same for the Box

  • How to add OCA DBA track Logo to Resume

    Hi all,
    Can anyone please help me out in how to add OCA DBA track logo to Resume,
    Please help me out...
    Regards,
    - Sri

    you should have received a letter from the Oracle Certification Program where the logo usage is stated, otherwise you can go to the Oracle Education site for further information.
    On the other hand, logo and title usage may mean different things, there are countries where showing a document or a degree is more important thant the knowledge and experience; there are other countries where it is the other way around. Either way, showing an OCA (logo or reference) in a resume isn´t considered enough to make a difference in a very keen and competitive job market.
    Message was edited by:
    Madrid

  • How to add more fields at level task for importing to MsProject

    Hi everyone,
    We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need.
    The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available fields and then we don't find the same amount for importing (34). So, in some cases we don't find fields which were configurated for exporting and it is no posible to upload the information back because the field is no available for importing.
    Does anyone knows how to add more fields for importing at the cProjects side?
    Thanks a lot,
    CAMILO URIBE

    Some fields can not be migrated because of MsProject designe. The above is the reason why cProjects' customizing does not offer the
    mapping of the same nuember of fields.

  • How to add more drop zones or movies in an idvd menu

    I was building a dvd in idvd and ran out of drop zones to fill but I couldn't figure out how to add more drop zones.
    I tried different templates but I could find none that had more than 12 drop zones.
    Then I was adding movies to the main menu and idvd refused to allow more movies added when I reached 10 movies. It said that the template did not accept more movies.
    I tried a few other templates and could not get it to accept more.
    I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
    Is there some way to add more than the default drop zones in an idvd template and to add more movies in a menu without having to use submenus?
    Thanks for any advice.

    I couldn't figure out how to add more drop zones
    Sorry, the templates 'are what they are'.
    I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
    You need to figure out how to work with what is available.
    If you want more freedom, buy Apple's Final Cut Studio and learn to use DVD Studio Pro.

  • How to add more than one tabular region in a page?...

    How to add more than one tabular region in a page?
    i have a page, that page contain form and tabular region. when i trying to add another tabular region it showing error
    1 error has occurred
    Updatable SQL Query already exists on page 2. You can only add one updatable SQL query per page. Select a different page.
    but i have to add the tabular in that page.
    Is it possible?
    pls help...
    Thanks and regards,
    skud

    hi,
    even i am searching for some thing similar.
    i want to have 3 calendars in one page.
    getting same message calendar already exists on page 2. You can only add one calander per page. Select a different page.
    pls help.

  • How to add an audio file to a link

    I am working on a project using IWeb and I am trying to figure out if it is possible and then, if it is how to add an audio file to a link. I would really be glad of your help as I am having problems meeting the requirements of the project if I don't make it work.
    Also, is it possible when having added a movie clip from quick time player to have the clip start as soon as the page is "opening", that is without pressing the play button?
    I am waiting in great suspense to see if anybody can help me out. If you have the answers to my questions, please send me an email at [email protected] - thank you so much :o)

    Hi Maiken
    Welcome to the discussion forums.
    All you need is open iWeb, select text or image, open inspector, go to link, check the "enable as a hyperlink" box, in "link to" there's a teardown menu where you select "a file" and select the file you want to link to.
    If you want to have it downloading look at [this|http://alyeska.altervista.org/en/iWeb_Downloads.html]
    For the second question:
    select the movie file in iWeb go to inspector, then to the last icon (showing the quicktime logo) and check the box that say "Autoplay".
    Regards,
    Cédric

  • How to add more summary data in the MIP of Compensation workbench

    Hi all,
    In the MIP (incentive plan) of the compensation workbench, we need to add more summary data in the summary section. I checked that all the summary data in that section are stored in the table 'ben_cwb_summary'.
    Even we can change the VIEW object for that page (using extension), we can't retrieve it because the new summary data/information we need to add are not stored in the table 'ben_cwb_summary'. We need to write our query to summerize data.
    How to implement it?
    Thanks in advanced!
    Jane

    faiz2000 wrote:
    > How to add more one record in the same time?
    >
    > Please I need your help to add more one record in the
    same time, how can I do
    > that?
    >
    > I have only one text field and the value it is linked
    from other table, if
    > user he bushes bottoms the all data it will copy it to
    new record:
    >
    > Ex.: <input name="textfield" type="text"
    >
    value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
    >
    >
    Use "Repeat Region"
    Mick

  • How to add more disk space into /   root file system

    Hi All,
    Linux  2.6.18-128
    can anyone please let us know how to add more disk space into "/" root file system.
    i have added new hard disk with space of 20GB, 
    [root@rac2 shm]# df -h
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/hda1             965M  767M  149M  84% /
    /dev/hda7             1.9G  234M  1.6G  13% /var
    /dev/hda6             2.9G   69M  2.7G   3% /tmp
    /dev/hda3             7.6G  4.2G  3.0G  59% /usr
    /dev/hda2              18G   12G  4.8G  71% /u01
    LABLE=/               2.0G     0  2.0G   0% /dev/shm
    /dev/hdb2             8.9G  149M  8.3G   2% /vm
    [root@rac2 shm]#

    Dude! wrote:
    I would actually question whether or not more disks increase the risk of a disk failure. One disk can break as likely as one of two of more disks.
    Simple stats.  Buying 2 lottery tickets instead of one, gives you 2 chances to win the lottery prize. Not 1. Even though the odds of winning per ticket remains unchanged.
    2 disks buy you 2 tickets in The-Drive-Failure lottery.
    Back in the 90's, BT (British Telecom) had a 80+ node OPS cluster build with Pyramid MPP hardware. They had a dedicated store of scsi disks for replacing failed disks - as there were disk failure fairly often due to the number of disks. (a Pryamid MPP chassis looked like a Xmas tree with all the scsi drive LEDs, and BT had several)
    In my experience - one should rather expect a drive failure sooner, than later. And have some kind of contingency plan in place to recover from the failure.
    The use of symbolic links instead of striping the filesystem protects from the complete loss of the enchilada if a volume member fails, but it does not reduce the risk of loosing data.
    I would rather buy a single ticket for the drive failure lottery for a root drive, than 2 tickets in this case. And using symbolic links to "offload" non-critical files to the 2nd drive means that its lottery ticket prize is not a non-bootable server due to a toasted root drive.

  • CWB: how to add more summary data in the summary section

    HI All,
    We need to add more summary data in the summary section. Some summary data need to calculated dynamically like (summary data A /summary data B).
    under the worksheet, there is a link:
    Personalize Dynamic Columns
    But this link allows to create Dynamic Columns for the worksheet, but not for summary setion.
    Is any way to add more summary data in the summary section through personalization instead of customization (VO extension)?
    Thanks in advanced!
    Jane

    faiz2000 wrote:
    > How to add more one record in the same time?
    >
    > Please I need your help to add more one record in the
    same time, how can I do
    > that?
    >
    > I have only one text field and the value it is linked
    from other table, if
    > user he bushes bottoms the all data it will copy it to
    new record:
    >
    > Ex.: <input name="textfield" type="text"
    >
    value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
    >
    >
    Use "Repeat Region"
    Mick

Maybe you are looking for