How to add more ram to video card

Hello, to play a game I need to have 1 GB of ram dedicated. I looked all over to find where I can allocate more ram, but I can't seem to find anything. Does anyone know how to allocate more ram to a video card? Is it possible?
My card is Intel HD Graphics 4600

HPliker wrote:
Hello, to play a game I need to have 1 GB of ram dedicated. I looked all over to find where I can allocate more ram, but I can't seem to find anything. Does anyone know how to allocate more ram to a video card? Is it possible?
My card is Intel HD Graphics 4600
You have shared RAM you don't have dedicated Video RAM that is shared with your regular Computer RAM.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

How to add more than 2 videos

I've created a Movie webpage and have successfully added two videos. I now want to add a third (or more), but there is no more room on the page. Is the only way to do this to use the "Add Page" button and create another Movie page? Is there another way to do this?

Welcome to the discussions. You can increase the height of the page via iWeb's Inspector > Page pane > Layout tab > Content Height.

How do I add more RAM to my macbook pro 15 inch late 2008 model?

I am wondering if I ma able to add more RAM to my 15 inch MacBook Pro from late 2008. It currently has 2 slots each with 2GB of RAM each. Am I able to change those out with higher amounts of RAM for each slot? Or is this thing maxed out and i'm out of luck? Any info would be much appreciated. Thanks!

MacBook Pro: How to remove or install memory
maushoo_32 wrote:
Am I able to change those out with higher amounts of RAM for each slot?
Mactracker

How do I add more than one video per track/layer?

Hi.
Could someone please advise me how I can add more than one video to a track/layer?
I'm cutting and pasting parts and each time I paste, a new track/layer is added.
The final video is going to be approximately 5 minutes long.
I am 17 seconds in and have 54 tracks already!
How do I stop this?
Thank you very much
J

More video tracks. This is actually what you want.
Unless you're just making a still image (like Photoshop), multiple layers give you control to animate each individually. (If it's just a Photoshop comp you're after, you may want to create it in Photoshop)
If you want to move ALL OF THE VIDEO TRACKS TOGETHER, you can use
parenting or
precompose those individual layers into a single composition.
livedocs

HP Pavilion 1000-1403AU - how do I open the unit to add more RAM

Hi there
want to open the unit to add more RAM
how can I do that?

@hpnotobook
A fellow Expert, Paul_Tikkanen, graciously provided a link to the notebook's series Maintenence & Service guide.
It appears that there is a single screw that you need to loosen.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Is my system DV7t-3300, or DV7t Quad Edition? And how to add more memory to it?

Dear forum,
I have an old notebook computer bought back in March 2010. It's a DV7t series. As it's getting slowly, I'm thinking of adding more memory. However, I'm not sure how much memory the motherboard can support for the upgrade.
I'm stuck with the first step, which is to decide the model number (and then motherboard) of it.
My original order email states the following:
YOUR CUSTOMIZED HP PC
dv7t quad edition
• Genuine Windows 7 Home Premium 64-bit
• Intel(R) Core(TM) i7-720QM Quad Core processor (1.6GHz, 6MB L3 Cache) with Turbo Boost up to 2.8 GHz
• FREE Upgrade to 4GB DDR3 System Memory (2 Dimm) from 3GB DDR3 System Memory (2 Dimm)
• 500GB 7200RPM SATA Hard Drive with HP ProtectSmart Hard Drive Protection
• 1GB Nvidia GeForce GT 320M - For i7-720QM and i7-820QM Processors
• 17.3" diagonal HD+ High-Definition HP LED BrightView Widescreen Display (1600 x 900)
• LightScribe SuperMulti 8X DVD+/-RW with Double Layer Support
• Webcam Only
• Intel Wireless-N Card with Bluetooth
• HP Integrated HDTV Hybrid Tuner
• HP Color Matching Keyboard
• 8 Cell Lithium Ion Battery
• No Modem
• Microsoft(R) Works 9.0
• HP Home & Home Office Store in-box envelope
However, the bottom of the notebook computer has a label that specifies the following:
Pavillion dv7
Serial: omitted
Product: WH764AV
Model: Q dv7t-3300.
I visited some memory buying website like 'crucial.com'. However, I was prompted to select the model and there were both dv7t-3300 CTO and dv7t Quad Edition. Unfortunately, they resulted in different kinds of memory (although the specs of the sugested memory modules seem to be the same, these two memory modules have different model numbers).
So, what model number my system has? 3300 CTO or Quad Edition?
Perhaps a suitable model number would tell me which motherboard this notebook has. Additionally, can anyone advice me about on how much memory my notebook can support (8GB or 16GB) maximum?
Thanks a lot!
Cruiser

Hi,
Max is 8Gb using the following manual:
http://h10032.www1.hp.com/ctg/Manual/c01859666.pdf
And from the following site:
https://www.ramcity.com.au/upgrade/hp-compaq/pavilion-dv7-series-notebook/dv7t-3300-cto/73893
The above manual shows you how to add/replace RAM. Looks like you have to buy 2 x 4Gb sticks.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to allocate more ram to T410 IntelHD graphics? CONFUSED

Hello There
I have a T410 Thinkpad, and I would like to know how to allocate more ram to the IntelHD graphics so that I can run my video games a lot better. I have searched through the bios and cannot find how
Sorry for my English
-Jack

If you're running Windows 7 or later, Windows should automatically allocate up to 1.5GB of system RAM to the integrated graphics.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

How to add more fields at level task for importing to MsProject

Hi everyone,
We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need.
The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available fields and then we don't find the same amount for importing (34). So, in some cases we don't find fields which were configurated for exporting and it is no posible to upload the information back because the field is no available for importing.
Does anyone knows how to add more fields for importing at the cProjects side?
Thanks a lot,
CAMILO URIBE

Some fields can not be migrated because of MsProject designe. The above is the reason why cProjects' customizing does not offer the
mapping of the same nuember of fields.

How to add more drop zones or movies in an idvd menu

I was building a dvd in idvd and ran out of drop zones to fill but I couldn't figure out how to add more drop zones.
I tried different templates but I could find none that had more than 12 drop zones.
Then I was adding movies to the main menu and idvd refused to allow more movies added when I reached 10 movies. It said that the template did not accept more movies.
I tried a few other templates and could not get it to accept more.
I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
Is there some way to add more than the default drop zones in an idvd template and to add more movies in a menu without having to use submenus?
Thanks for any advice.

I couldn't figure out how to add more drop zones
Sorry, the templates 'are what they are'.
I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
You need to figure out how to work with what is available.
If you want more freedom, buy Apple's Final Cut Studio and learn to use DVD Studio Pro.

How to add more than one tabular region in a page?...

How to add more than one tabular region in a page?
i have a page, that page contain form and tabular region. when i trying to add another tabular region it showing error
1 error has occurred
Updatable SQL Query already exists on page 2. You can only add one updatable SQL query per page. Select a different page.
but i have to add the tabular in that page.
Is it possible?
pls help...
Thanks and regards,
skud

hi,
even i am searching for some thing similar.
i want to have 3 calendars in one page.
getting same message calendar already exists on page 2. You can only add one calander per page. Select a different page.
pls help.

I have a MBPro 2.4 Ghz with 2 GB ram max. is there anyway to add more ram?

so this might be a really stupid question
I have a MBPro 2.4 Ghz with 2 GB ram max. is there anyway to add more ram?

unfortunately i don't have the manual anymore
Model Name:          MacBook Pro
Model Identifier:          MacBookPro3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBP31.0070.B07
SMC Version (system):          1.16f11
I've read that max'ing out ram isn't the best thing to do. also i've read that some memory chips are faster than others?
thanks for all your help

How to add more summary data in the MIP of Compensation workbench

Hi all,
In the MIP (incentive plan) of the compensation workbench, we need to add more summary data in the summary section. I checked that all the summary data in that section are stored in the table 'ben_cwb_summary'.
Even we can change the VIEW object for that page (using extension), we can't retrieve it because the new summary data/information we need to add are not stored in the table 'ben_cwb_summary'. We need to write our query to summerize data.
How to implement it?
Thanks in advanced!
Jane

faiz2000 wrote:
> How to add more one record in the same time?
>
> Please I need your help to add more one record in the
same time, how can I do
> that?
>
> I have only one text field and the value it is linked
from other table, if
> user he bushes bottoms the all data it will copy it to
new record:
>
> Ex.: <input name="textfield" type="text"
>
value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
>
>
Use "Repeat Region"
Mick

How to add more disk space into /   root file system

Hi All,
Linux 2.6.18-128
can anyone please let us know how to add more disk space into "/" root file system.
i have added new hard disk with space of 20GB,
[root@rac2 shm]# df -h
Filesystem            Size Used Avail Use% Mounted on
/dev/hda1             965M 767M 149M 84% /
/dev/hda7             1.9G 234M 1.6G 13% /var
/dev/hda6             2.9G   69M 2.7G   3% /tmp
/dev/hda3             7.6G 4.2G 3.0G 59% /usr
/dev/hda2              18G   12G 4.8G 71% /u01
LABLE=/               2.0G     0 2.0G   0% /dev/shm
/dev/hdb2             8.9G 149M 8.3G   2% /vm
[root@rac2 shm]#

Dude! wrote:
I would actually question whether or not more disks increase the risk of a disk failure. One disk can break as likely as one of two of more disks.
Simple stats. Buying 2 lottery tickets instead of one, gives you 2 chances to win the lottery prize. Not 1. Even though the odds of winning per ticket remains unchanged.
2 disks buy you 2 tickets in The-Drive-Failure lottery.
Back in the 90's, BT (British Telecom) had a 80+ node OPS cluster build with Pyramid MPP hardware. They had a dedicated store of scsi disks for replacing failed disks - as there were disk failure fairly often due to the number of disks. (a Pryamid MPP chassis looked like a Xmas tree with all the scsi drive LEDs, and BT had several)
In my experience - one should rather expect a drive failure sooner, than later. And have some kind of contingency plan in place to recover from the failure.
The use of symbolic links instead of striping the filesystem protects from the complete loss of the enchilada if a volume member fails, but it does not reduce the risk of loosing data.
I would rather buy a single ticket for the drive failure lottery for a root drive, than 2 tickets in this case. And using symbolic links to "offload" non-critical files to the 2nd drive means that its lottery ticket prize is not a non-bootable server due to a toasted root drive.

CWB: how to add more summary data in the summary section

HI All,
We need to add more summary data in the summary section. Some summary data need to calculated dynamically like (summary data A /summary data B).
under the worksheet, there is a link:
Personalize Dynamic Columns
But this link allows to create Dynamic Columns for the worksheet, but not for summary setion.
Is any way to add more summary data in the summary section through personalization instead of customization (VO extension)?
Thanks in advanced!
Jane

faiz2000 wrote:
> How to add more one record in the same time?
>
> Please I need your help to add more one record in the
same time, how can I do
> that?
>
> I have only one text field and the value it is linked
from other table, if
> user he bushes bottoms the all data it will copy it to
new record:
>
> Ex.: <input name="textfield" type="text"
>
value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
>
>
Use "Repeat Region"
Mick

How to add more functionalities to personalization dialogue box in portal

Hi
How to add more functionalities to the personalization dialouge box in sap portal?
Just like User Profile tab, how can I add my own functionality to personalization dialouge box?
I want the functionality to appear as a tab under Detailed Navigation in Personalization dialouge box - similar to User Profile, Work Protect Mode tabs which are already there under detailed navigation in personalization.

Thanks Gyan.
Below is the code for creating list box :
OAApplicationModule am = pageContext.getRootApplicationModule();
OAViewObject listVO=(OAViewObject)am.findViewObject("LocationsLOVVO");
OAWebBeanFactory list1 = pageContext.getWebBeanFactory();
OADefaultListBean list = (OADefaultListBean)list1.createWebBean(pageContext, OAWebBeanConstants.DEFAULT_LIST_BEAN, null, "LocationsList");
list.setListViewObjectDefinitionName("oracle.apps.irc.lov.server.LocationsLOVVO");
list.setListValueAttribute("LocationCode");
list.setListDisplayAttribute("LocationCode");
list.setSize(6);
list.setMultiple(true);
list.setName("Location");
OAMessageLayoutBean listboxbean = (OAMessageLayoutBean)webBean.findChildRecursive("AplmessageLayout");
listboxbean.addIndexedChild(list);
But it is not inserting all the location values in the list.
Regards,
Gaurav.

How to add more ram to video card

Similar Messages

Maybe you are looking for