How to add multiple forms in single adf page?
Hi All,
I have some requirement.I have created one adf page from this page i need to insert(create a user )into back-end.
here my requirement i want to add more users at sometime.like in that page its need to create one button kind of this to add more user creation form in single page after filling all the details for each user finally i need to submit all user(heterogeneous) way of submitting forms. is it possible in adf? if possible how to go with this requirement.
please guide me .and show me some solutions.
Regards
Siva
HI Jobinesh ,
I created same reign thing in .jsff page with the same functionality(instead of main.jsf i created test.jsff) . when i deployed in to OIM custom page i am getting below exception.
/main.jsff
Error:encountered deferred syntax #{in template text intended as a literal ,escape it or set directive differedsyntaxAllowedasLiteral
ADF_FACES-60097 and ADF_FACES-60096
can you please take a lookinto the error where i cam doing mistake.
regards
Siva
Similar Messages
-
How to add multiple columns to single column header
hi,
i wans to add two columns under a single column header in jtable how can i do this.By following some of these clever samples:
http://www.crionics.com/products/opensource/faq/swing_ex/JTableExamples1.html
Lots of different ideas on manipulating headers and columns there and on the proceeding pages. -
How to add multiple reports in single
Hi,
I have to develop a report which contains two reports.
Ex:
first one is
Year Revenue
2008 10000
2009 30000
2010 20000
G.Total 60000
and seconds report is
Year Product Units
2008 Biztec 2000
2009 FunProd 1000
my requirement is that i want to develop
Year Revenue
2008 10000
2009 30000
2010 20000
G.Total 60000
Product Units (Columns needs to be aaded)
2008 Biztec 2000
2009 FunProd 1000
Please share your thoughts on the above.Hi,
Try to select all the columns required in both reports into single criteria.
step1:
In table view select only first report columns and exclude the 2nd report coulmns.
step 2:
In pivot or table view select only 2nd report columns and exclude 1st report columns.
step3:
use this both views in compound view and save so u can see both views values of different reports.
This is just a try ;)
Mark If helpful/correct
Thanks. -
How to add multiple child dialog in a singel page of dialog in ms crm2013
Hi All,
How to add multiple child dialogs in a page in dialog in online MS CRM 2013. I am able to add dialogs one at the end of the page. I am not able to add single / multiple dialogs in between the page.
As per my requirement there is multiple conditions , based on the outcome of condition respective child dialogs need to be linked in a page. Any solution ?
Thanks
Shankar.BHi,
As far as I know this is not possible with OOTB Dialoge in the current version. However there are 3rd party tools like TK Dialogs which provide this feature. Here is the link for the tool and few comparison as to when
to use OOTB v/s TK Dialog.
http://www.teamknowledge.co.uk/microsoft-crm.php
http://garethtuckercrm.com/2012/07/11/tk-dialogs-vs-microsoft-crm-dialogs/
Hope this helps.
Minal Dahiya
blog : http://minaldahiya.blogspot.com.au/
If this post answers your question, please click "Mark As Answer" on the post and "Vote as Helpful" -
Does anyone know how to add multiple pictures to a single frame in iMovie?
Does anyone know how to add multiple pictures to a single frame in iMovie?
Maybe you would be better off posting this in the iPhoto or iDVD categories of the forums.
http://discussions.apple.com/category.jspa?categoryID=143
http://discussions.apple.com/category.jspa?categoryID=128
The answer to your question depends on what you ant to do with the DVD.
Do you want a DVD menu, slide show etc.
iPhoto will allow you to burn straight to a DVD. Just select the album you want to burn then go to share in the tool bar and select Burn. -
How to send multiple attachements in single mail
Hi All,
Currently i am using this function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail with only one attachment.
But now i need to send multiple attachments to a single mail.
Can any one please tell me as how to send multiple attachments in single mail.
Thanks in advance.Hi
See this and do accordingly
Mailing with Attachment by ABAP Coding
Refer this link:
Mail with attachment.
FORM send_list_to_basis .
DATA: w_path LIKE rlgrap OCCURS 0 WITH HEADER LINE,
lt_index TYPE sy-tabix,
doc_type(3) TYPE c,
descr LIKE it_objpack_basis-obj_descr,
temp_data LIKE w_path,
temp1 TYPE string,
tab_lines TYPE i,
langu(15) TYPE c,
expirydate TYPE so_obj_edt,
L_FILE1(100).
CONCATENATE 'C:\' sy-repid '_' sy-datum '.XLS' INTO L_FILE1.
W_PATH-FILENAME = L_FILE1.
APPEND w_path.
CLEAR w_path.
wa_doc_chng-obj_descr = 'User List not logged on for 180 days'.
wa_doc_chng-obj_langu = 'E'.
wa_doc_chng-obj_expdat = sy-datum.
CLEAR w_subject.
CONCATENATE 'Please find attached document with list of users'
'not logged on for 180 days for client' sy-mandt
INTO w_subject SEPARATED BY space.
it_objtxt_basis-line = w_subject.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
it_objtxt_basis-line = text-004.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
CLEAR w_tab_line.
DESCRIBE TABLE it_objtxt_basis LINES w_tab_line.
READ TABLE it_objtxt_basis INDEX w_tab_line INTO l_cline.
wa_doc_chng-doc_size =
( w_tab_line - 1 ) * 255 + STRLEN( l_cline ).
CLEAR it_objpack_basis-transf_bin.
it_objpack_basis-head_start = 1.
it_objpack_basis-head_num = 0.
it_objpack_basis-body_start = 1.
it_objpack_basis-body_num = w_tab_line.
it_objpack_basis-doc_type = 'RAW'.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
LOOP AT w_path.
temp1 = w_path.
descr = w_path.
CALL FUNCTION 'STRING_REVERSE'
EXPORTING
string = descr
lang = 'E'
IMPORTING
rstring = descr.
CALL FUNCTION 'STRING_SPLIT'
EXPORTING
delimiter = '\'
string = descr
IMPORTING
head = descr
tail = temp_data.
CALL FUNCTION 'STRING_REVERSE'
EXPORTING
string = descr
lang = 'E'
IMPORTING
rstring = descr.
CALL FUNCTION 'STRING_SPLIT'
EXPORTING
delimiter = '.'
string = descr
IMPORTING
head = temp_data
tail = doc_type.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = temp1
filetype = 'BIN'
header_length = 0
read_by_line = 'X'
replacement = '#'
TABLES
data_tab = it_upload.
DESCRIBE TABLE it_upload LINES tab_lines.
DESCRIBE TABLE it_objbin_basis LINES lt_index.
lt_index = lt_index + 1.
LOOP AT it_upload.
wa_objbin_basis-line = it_upload-line.
APPEND wa_objbin_basis TO it_objbin_basis.
CLEAR wa_objbin_basis.
ENDLOOP.
it_objpack_basis-transf_bin = 'X'.
it_objpack_basis-head_start = 0.
it_objpack_basis-head_num = 0.
it_objpack_basis-body_start = lt_index.
it_objpack_basis-body_num = tab_lines.
it_objpack_basis-doc_type = doc_type.
it_objpack_basis-obj_descr = descr.
it_objpack_basis-doc_size = tab_lines * 255.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
ENDLOOP.
it_reclist_basis-receiver = '[email protected]'.
it_reclist_basis-rec_type = 'U'.
APPEND it_reclist_basis.
CLEAR it_reclist_basis.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = it_objpack_basis
contents_txt = it_objtxt_basis
contents_bin = it_objbin_basis
receivers = it_reclist_basis
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
IF sy-subrc EQ 0.
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
ENDFORM. " send_list_to_basis
<b>Reward points for useful Answers</b>
Regards
Anji -
How to Open multiple form with only one screen painter file
Hi all ,
I want to reopen the form without closing the active form ,i want to use same srf file ..
I have already try it but form already exist error occur .
pl help me , how to do it ?
how to open multiple form with same srf file without closing active forms .
thanks in advance,
msw<?xml version="1.0" encoding="utf-16" ?>
<Application>
<forms>
<action type="add">
<form appformnumber="-1" FormType="-1" type="0" BorderStyle="0" uid="BOE" title="Bill of Entry" visible="1" default_button="1" pane="0" color="0" left="365" top="62" width="801" height="410" client_width="785" client_height="372" AutoManaged="1" SupportedModes="15" ObjectType="">
<datasources>
<dbdatasources>
<action type="add">
</action>
</dbdatasources>
<userdatasources>
<action type="add"/>
</userdatasources>
</datasources>
<Menus>
<action type="enable">
<Menu uid="1282"/>
</action>
<action type="disable">
<Menu uid="5890"/>
</action>
</Menus>
<items>
</items>
<ChooseFromListCollection>
<action type="add">
<ChooseFromList UniqueID="-1" ObjectType="-1" MultiSelection="0" IsSystem="1"/>
</action>
</ChooseFromListCollection>
<DataBrowser/>
<Settings Enabled="0" MatrixUID="" EnableRowFormat="1"/>
</form>
<form appformnumber="-1" FormType="-1" type="0" BorderStyle="0" uid="BOE1" title="Bill of Entry" visible="1" default_button="1" pane="0" color="0" left="365" top="62" width="801" height="410" client_width="785" client_height="372" AutoManaged="1" SupportedModes="15" ObjectType="">
<datasources>
<dbdatasources>
<action type="add">
</action>
</dbdatasources>
<userdatasources>
<action type="add"/>
</userdatasources>
</datasources>
<Menus>
<action type="enable">
<Menu uid="1282"/>
</action>
<action type="disable">
<Menu uid="5890"/>
</action>
</Menus>
<items>
</items>
<ChooseFromListCollection>
<action type="add">
<ChooseFromList UniqueID="-1" ObjectType="-1" MultiSelection="0" IsSystem="1"/>
</action>
</ChooseFromListCollection>
<DataBrowser/>
<Settings Enabled="0" MatrixUID="" EnableRowFormat="1"/>
</form>
</action>
</forms>
</Application> -
How to add multiple users to a role in ECC 6.0
How to add multiple users (say 1000) to a role in ECC 6.0?
Hi
You can actually add multiple users to a role using transaction SU01. From SU01, use the menu Environment->Mass Changes.
Here you can manually add the users, select them by address or authorisation data. Once you have your user list, you can then add or remove roles and/or profiles.
Secondly , You can use SU10 to do mass changes to multiple users including role assignments per logical systems
Also check the following link:
http://www.sap-img.com/bc021.htm
I hope this should do it
regards
Chen -
How to add multiple table when creating add on using b1de
Hi all,
Plz help me
How to add multiple table when creating add on using b1de.
ThanksHi dns_sap,
Can you explain a little better what you are trying to accomplish? Is it to create UserTables and UserFields in the database, when the addon runs the first time?
If so, you can use the following code
Add User Table
Try
Dim lRetCode As Long
Dim oUDT As SAPbobsCOM.UserTablesMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
oUDT.TableName = TableName
oUDT.TableDescription = TableDescription
oUDT.TableType = TableType
lRetCode = oUDT.Add
'// Check for error when adding the Table: if lRetCode = 0 the table was created; if lRetCode = -2035 the table already exisits
If lRetCode <> 0 Then
oApplication.MessageBox("Error: " & lRetCode.ToString & ", " & oCompany.GetLastErrorDescription)
End If
Catch ex As Exception
oApplication.MessageBox(oCompany.GetLastErrorDescription)
Finally
System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDT)
oUDT = Nothing
lRetCode = Nothing
GC.Collect()
End Try
Add User Field
Try
Dim lRetCode As Long
Dim oUDF As SAPbobsCOM.UserFieldsMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
oUDF.TableName = TableName
oUDF.Name = FieldName
oUDF.Description = FieldDescription
oUDF.Type = FieldType
lRetCode = oUDF.Add
'// Check for error when adding the field: if lRetCode = 0 the field was created; if lRetCode = -2035, the field already exists
If lRetCode <> 0 Then
oApplication.MessageBox("Error: " & oCompany.GetLastErrorCode & ", " & oCompany.GetLastErrorDescription)
End If
Catch ex As Exception
oApplication.MessageBox(oCompany.GetLastErrorDescription)
Finally
System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDF)
oUDF = Nothing
lRetCode = Nothing
GC.Collect()
End Try
Regards,
Vítor Vieira -
How to add multiple namespaces in XSD ?
Can anyone tell me how to add multiple namespaces inside an XSD. Or how to import XSD into another XSD ??
Thanks<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://xml.ibridge.nl/nl/rsg/domein/3/company" xmlns:alg="http://mynamespace/generic" targetNamespace="http://xml.ibridge.nl/nl/rsg/domein/3/company" elementFormDefault="qualified" attributeFormDefault="unqualified" version="2.1">
<xs:import namespace="http://mynamespace/generic" schemaLocation="algemeen.xsd"/>
you define xmlns:alg with a namespace
and after that use the namespace itself to import a xsd for it -
How to add multiple columns?
Using designer API, how to add multiple columns to the repository tables? I want to add number of columns at a time instead of adding column by column.
Thanks in advance.Can you use sqlplus?
ALTER TABLE table_name ADD (column_name data_type), (Column_name datatype),...
Check the SQL Reference 11-9.
Hope this helps.
Bill Swanson -
How to add multiple button/choices in button choice
HI all ,
How to add multiple button/choices in button choice ?Initialize a cluster array (CrsrList type) with as many cursors as you think you would ever need. Setup your cursors dynamically, then delete the unused cursors (array elements) and then update your CursorList property.
Message Edited by vt92 on 03-20-2009 04:04 PM
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal
Attachments:
cursors.PNG 5 KB -
How to add multiple images in jinternalframe
Hi all,
how to add multiple images to the jinternalframe, at specified location of the pane and resizing the images with specified height and width.
code examples are highly appreciated.
Thanks & Regards,
AbelThanks, it works perfectly. It's a really smart way of fixing the problem too :)
I also found your toggle button icon classes which is something I've also had a problem with.
Thanks. -
How to add multiple audio transitions
I know how to add multiple video transitions to a whole series of clips, but I want to add a cross fade to every audio clip in the sequence....how can I do this if at all, or is it not possible? Thanks
I'm suspecting that you don't have the destination tabs set correctly when you drag the audio clips to the canvas overlays.
Destination & Source tabs are the tabs located at the left side of the timeline. When you want to add audio cross fades to your audio clips, do the following:
1. Set the played at the beginning of the sequence.
2. Click the video source tab to disconnect it from the video track.
3. Verify that the audio source tabs are connected to the audio tracks that you want the audio edited to.
4. Select your audio clips.
5. Drag the selected audio clips to the Overwrite with Transition overlay in the canvas. -
How to add multiple test conditions in 'test' attribute expression of xsl:if tag
Hi all,
How to add multiple test conditions in 'test' attribute expression of <xsl:if> tag ?
I have 2 parameters and I want To skip the massage if this 2 conditions happened I tried to write it :
<xsl:when test="($TransferToCompany = 0 and $ObjectInclide=1 )">
<b1im_skip xmlns="" info=" Obect Will Not Transfer To company">
</b1im_skip>
</xsl:when>
But I get an error while I am trying to transfer The object (Account) true B1if
I am working with SBO 9 PL 13
thank you
shacharHi saado
Check this link:
http://stackoverflow.com/questions/318875/can-you-put-two-conditions-in-an-xslt-test-attribute
Kind regards,
Radek
Maybe you are looking for
-
Site Unusable After Update!
Just updated to the latest version of Muse, converted, edited, and re-uploaded my site, and it's now almost unusable as all the navigation links on the left hand side are malfunctioning really badly! www.thedraculasociety.org.uk They are text boxes w
-
Differences between the types of DSO's and DTP's
Hi Friends, 1. pls help me in telling different types of DSO's and their differences? 2. pls help me in telling different types of DTP's and their differences? Thanks in Advance. Jose Reddy
-
http://support.apple.com/kb/DL1007 has the links and details: Requires iPhoto 09, 10.5.8 or 10.6.2 and the added cameras are Hasselblad H3DII-50 Leica M9 Leica X1 Olympus E-P1 Olympus E-P2 Panasonic Lumix DMC-GF1 Pentax K-7 Pentax K-x Sony Alpha DSLR
-
Subclips inconsistent behavior; not always working correctly in Premiere Pro CC
I load a clip into the Source panel. I set in and out points and then CTRL + U to create a subclip. I have "Restrict Trim to subclip boundaries" turned off. (Thank you Adobe, I've been waiting for "soft" subclips forEVER!) The new subclip appears
-
I now cannot access my live files in Dreamweaver
I created a new site in Dreamweaver. Now I have finished the site which was intended to replace an old one. My brother who has the hosting package for the site said that I needed to create a site within the root folder called /public_html/new so that