How to add my Epson 322 to iMac with WiFi

I am not able to connect a new Epson E322 printer to my iMac uing WiFi.
The printer shows my router, recognises it, asks for and gets the password, then requests I set up the iMac but there is no link I can find on it to link a printer.
Anybody have any help, please?
Graham

Hi Graham,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides a lot of great information which can help you setup your wireless printer so that it can be used with your iMac.
OS X Lion: Set up a printer to print wirelessly
Ciao,
-Jason

Similar Messages

  • How to add a SSD to 2010 iMac with 1tb drive

    How to add a SSD to 2010 iMac with 1tb drive? I have a mid-2010 iMac with 1tb HD and would like to either replace the HD with SSD -or- add 256 or 400gb SSD to maybe the Optical Drive and use it as the boot drive. Is this possible with Model 11,2? i thought i\I'd read it was, but recently am reading my system is too old - OWC have SSD drives for newer models not Model 11,1 -or- 11,2

    Any SATA SSD will work, whatever you are reading is incorrect.
    You have 2 choices with this model-install the SSD in place of the HDD or the Superdrive.
    If you are installing in place of Superdrive you will need some form of SSD Caddy-these can be found on the cheap at places like eBay, also OWC sell one called the DataDoubler.
    Guide:https://www.ifixit.com/Guide/Installing+iMac+Intel+21.5-Inch+EMC+2389+Dual+Hard+ Drive/8643
    If installing in place of old HDD you will notice that the propietary Temperature Sensor will not fit on the new drive, you will need to replace this with a sensor such as this or this
    You will also need a 3.5inch to 2.5inch drive adaptor such as this
    Guide: https://www.ifixit.com/Guide/iMac+Intel+21.5-Inch+EMC+2389+Hard+Drive+Replacemen t/6284
    If you still have doubts contact OWC as mentioned above, I would start deciding whether your Superdive is needed or if you want to swap out the HDD.
    Hope this points you in the right direction

  • How do I use my late 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output.

    May be this question has been asked thousand times. how do I use my mid 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output. if apple hasn't removed that feature and has just moved that functinoality to thunderbolt then how can I use it. currently there is no laptop available with thunderbolt output. no 3rd party converter available. whats the use of having feature on latest functionality if we cant use it. I wish they would have made one port has mini-dvi and other thunderbolt for backward compatibility untill some vendor comes up with converter.

    It Says :
    Mac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
    Name one computer model/vendor which has thunderbolt as output for display + audio. this is so stupid to move to new technology without availbility of its compatible devices.

  • How to add a new field in MM01, with say contaminent  as a field?

    How to add a new field in MM01, with say contaminent  as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

    Hai      venkateshwar reddy ,
    try with these user exits
    MGA00001 Material Master (Industry): Checks and Enhancements
    MGA00002 Material Master (Industry): Number Assignment
    MGA00003 Material Master (Industry and Retail): Number Display
    Refer these steps also
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

  • How to add a scrolling text in portrait with iMovie

    how to add a scrolling text in portrait with iMovie

    This is how i was able to do it. Edit html source.
    <div align="center"><marquee id='scroll_news4' bgcolor=#ff9966 "><font color="#000000" size="+1" ><strong>Outlook is down! IT is working on it! </strong></font></marquee></div>
    <input type='Button' value='Stop' id ='b1' onClick='button_click()';>
    <SCRIPT LANGUAGE="JavaScript">
    <!-- Begin
    function button_click()
    if(document.getElementById('b1').value=="Start"){
    document.getElementById('b1').value="Stop";
    document.getElementById('scroll_news4').start();
    }else{
    document.getElementById('b1').value="Start";
    document.getElementById('scroll_news4').stop();
    // End -->
    </script>

  • Regarding : How to add a user to portal group with the help of webdynpro .

    Hii ,
    I am working on an application in which with the help of an action( Button)  we r adding a user in Ztable in R/3 , as well as  group in portal.
    The user r successfully creating in Ztable but from portal side No user is assigned to Portal group.
    I need coding solution for " How to add a user to portal group with help of webdynpro"
    Any usefull link will also do.
    Pls anyone have any solution ??
    Thnks in advance.
    Rewards r waiting for u .

    Hi,
    Use UME api to add user to portal group.
    Using UME API:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d562b7-1405-2a10-dfa3-b03148a9bd19
    Regards,
    Naga

  • I installed Elements 9 on my MacBook . How do I reinstall on on an iMac (with no CD drive) ?

    I installed Elements 9 on my MacBook . I have a multi license How do I reinstall on on an iMac (with no CD drive) ?

    Jonahood if you bought a new Mac without an optical drive then you can copy the installation files onto a USB drive on a computer which does have an optical drive.  You can then install on your new iMac from the USB drive.
    Alternately you can download Photoshop Elements 9 by following the directions listed at http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml.  Please make sure to complete the Very Important Instructions prior to scrolling down the page and clicking on the download link.

  • How do I set up mail for iMac with hotmail?

    How do I set up mail for iMac with hotmail?

    Open mail and follow the onscreen directions. If you are trying to set up this as a a second account, select Preferences from the Mail menu and choose the accounts tab. Click the plus button at the bottom of the screen and follow the onscreen directions.

  • Have a macbook air, how do i get online on an airplane with wifi

    have a macbook air, how do I get online on an airplane with wifi?

    Check the inflight manual, or ask a flight attendant.

  • How can I find my lost ipad-2 with WIFI only. I have only its serial no. icloud says alway the device is offline

    how can I find my lost ipad-2 with WIFI only. I have only its serial no. icloud says alway the
    device is offline

    It will only show if the device is turned on. And if someone else has it, they can turn that feature off. Your best options are to return to the location where you think you lost it, and see if anyone returned it. Also contact your local law enforcement.
    Reporting a lost or stolen product
    http://support.apple.com/kb/HT2526
    Report to police along with serial number. Change all your passwords.
    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Apple Product Lost or Stolen
    http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
    If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
    How to Find Your iPad Serial Number
    http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number

  • How to add a monitor to an iMac 20 inch

    How to add an extra monitor with VGA connector to an iMac 20 inch ( model 7,1)
    Wich adaptaer cable do I need?
    What are the set ups  I have to go through?

    The Mid 2007 iMac 7,1 has a Mini DVI output port.
    To connect a VGA only monitor, then you will need a Mini-DVI to VGA adapter and a VGA cable.
    http://store.apple.com/us/product/M9320G/A
    However check the monitor closely, because if it also has a DVI connection then would be better to use the Mini-DVI to DVI adapter and a DVI cable.
    http://store.apple.com/us/product/M9321G/B
    Dennis

  • How to connect Digital Optical Audio output iMac with Receiver Input

    I have connected iMac with onkyo hts-3300 home theater system receiver through optical audio TosLink Cable.( http://www.amazon.com/Digital-Optical-Audio-TosLink-Cable/dp/B001ZU3G2I/ref=sr12?ie=UTF8&qid=1292865309&sr=8-2 ). Unfortunately there is no sound coming out from the Home theater system. I have verified the Receiver optical input is working fine by connecting with my TV optical audio digital out put and the it's working great. The only difference between TV and iMac is, on my TV, it has optical audio digital output and I can use this cable (http://www.amazon.com/Tripp-Lite-A102-02M-Digital-connectors/dp/B0002WPREU/ref=s r11?s=electronics&ie=UTF8&qid=1297320792&sr=1-1) to make it work. I can also verified my optical audio TosLink Cable working because I can see the red light coming out from the cable. So the only problem could be from iMac. I doubt I need to change the additional setting to configure iMac to use external optical audio setting instead of the buit in audio setting. Hoe can I able to do it? or my iMac(IMAC 21.5"/3.06/2X2GB/500GB/9400M-ITP
    MB950ZP/A) doesn't support optical digital audio out put? I have follow this thread http://discussions.apple.com/thread.jspa?messageID=12769423&#12769423 and to my surprise which doesn't work out for me. I doubt that i need to change some setting, but when I got to setting>> sound I cannot change any setting. I was quite depressed aldy. Can someone answer my question as i m a newbie here. Thanks a lot

    Thank you very much for your reply.
    @Király : May i know how to Open Audio Midi Setup? Is this Audio Midi Setup is in the locatated in the Setting in Mac Snow Leapord OS? or how to locate this "Audio Midi Setup " in Mac enviroment. Is it possible to open this Audio Midi Setup in windows 7 enviroment also? I Just want to get the audio from my iMac in Hts-3300 onkyo home theatre. YOur help is much appreciated
    @rkaufmann87 : Thank you very much for your sharing about this http://www.apple.com/airportexpress/ connection. for me what i understand is the digital audio output in airportexpress is the same as the audio out put in iMac in terms of details sepcs. So this airportexpress will only help you connect wirelessly to home theatre system, rather than waired connection. Other than that nothig much difference. So there is no point for me to spend extra bucks to attain the wireless connection. Unless the airportexpress have optical digital input, which i believe not. Correct me if I m worng, thanks

  • How do you transfer from mini to imac with fire wire if iMac has Lion and mini has snow leopard

    My logic board has gone on my mini(intel) and I need to transfer this machine to an iMac(with Lion) how do I do this as it doesn't seem to be working with my disc.My update to Lion was purchased as a download and the only disc I have is snow leopard to reboot.

    If your Mac mini has a dead logic board then you will not be able to boot it at all, not even in Target Disk Mode. You would either have to get the logic board repaired, or remove the hard disk and either put it in a disk enclosure or connect it in some other way to the iMac.
    The fact that the two Macs ran different versions of OS X is irrelevant, once you have the drive connected to the iMac you can run the Migration utility to migrate the user account and data.

  • How to add push button in alv display with out class or method

    Hai,
    How to add push buttons in out put screen of ALV (tool bar) with out using classes or methods .I want to know using normal ALV .
    Thanks in advance .
    kiran

    You should post your question in the ABAP forum.
    ABAP Development

  • HT2801 How to make external "SuperDrive" work on iMac with failed built-in?

    WHY is my new external "SuperDrive" "designed exclusively for use with Mac computers that do not have a built-in optical drive"?  How can I make it work on my iMac with a failed built-in "SuperDrive" that was obviously junk to begin with?  I ordered it from a Staples kiosk that had zero product information but the name of the product was USB SuperDrive and it was made by Apple so I reasoned it would run on my Apple.  I bought an LG 2 months ago when the built-in failed but the LG only worked about a month then every disc burn was aborted as "error."  So I bought new burn software from the Apple app store but still "error" so I went to Staples and bought this and it didn't work so I ise a magnifying glass to read the light grey letters on the white box and it says "Compatible with Mac systems without a built-in optical drive."  I found articles online advising how to hack my own computer to make this work but I am low-tech and afraid of wrecking my computer.  I am FURIOUS with Apple, I buy it only because Windows gave me such grief but honestly Apple hardware has OFTEN proven itself short-lived and low quality.  PLEASE how do I burn an audio CD with my stupid iMac peice of garbage?

    Calm down.
    If you so choose here are some quality optical drives you can purchase, online here.
    http://eshop.macsales.com/item/OWC/VLU2SD24XS/
    http://eshop.macsales.com/item/OWC/MR3F82SD24S/
    For Mac burning software, you can purchase and use Roxio Toast.
    http://www.roxio.com/
    OR you can try this freeware software called simply Burn.
    http://burn-osx.sourceforge.net/Pages/English/home.html

Maybe you are looking for

  • Consumption accounts not created as cost elements - Implications

    Hi There are following GL accounts as an Expense GL accounts: Cost of Raw Material Consumption Cost of Finished Goods Manufactured Cost of Finished Goods Sold Change in Stock WIP. I have not created them as cost elements since its asking me cost cent

  • Can Oracle 9i AS handle this?

    We have a custom in built cache server. But if any object is changed (like adding a new column to the table), our cache server does not pick it up. Is it possible by Oracle 9iAS, if we introduce it in between our database and custom CS so that the Or

  • Best choice for format and preset for a simple video

    I have a simple video of plain text and some music assembled in AE. I now want to encode it using the Adobe media encoder. What is the best choice of format and preset, if I want to be able to send (or link) the video to others, and have it play well

  • My ipod crack do i have to pay to get it replaced?

    My ipod currently fell by accident. And my screen cracked. Ive never gone to Apple before so i dont know if ill have to pay to replace it or what?

  • Mail to Mail

    How can I easily transfer email from my iBook Mail to Mail on my eMac. Nothing seems to work. I'm currently using Entourage but would like to switch to Mail, this is my only hang up. In Entourage it's EXTREMELY simple, all you have to do is drag to d