How to add network information for failover zones with logical hostname?
Hello!
As stated in [http://docs.sun.com/app/docs/doc/819-3069/ds_template-21?a=view] I must not configure network addresses for a zone when I manage these with a logical hostname:
If you require the SUNW.LogicalHostName resource type to manage all the zone's addresses, configure a SUNW.LogicalHostName resource with a list of the zone`s addresses and do not configure them by using the zonecfg utility.But when I start the zone for the first time using "zlogin -C" it does not ask me any questions about the network. Of course, there is no adapter configured. But how do I add information like routes or nameservers to the system when using a logical hostname?
TIA
Stephan
Hi Stephan,
I can only assume that when the zone was configured via zonecfg without any network interfaces that sysidcfg did not ask you for the default route or name service, as such you will need to setup those parts up manually.
Please take a look at the FAQs for zones, i.e. http://opensolaris.org/os/community/zones/faq/ in particular
http://opensolaris.org/os/community/zones/faq/#u5
http://opensolaris.org/os/community/zones/faq/#cfg_defroute
Finally, if you require a NIS client then please see http://docs.sun.com/app/docs/doc/816-5166/ypinit-1m?a=view
Regards
Neil
Similar Messages
-
How to add additionnal information in EP Logon UI Header ?
Hi all,
I would add informations in the message "Welcome FirstName LastName" onto the EP Logon UI header.
I could find the variable for the "Welcome" text (in logonLabels_LG.properties file), so I do not know how to add a variable (for example the Personnal Number or the Position from ECC HR) next the first and last name.
So I could find the JSP page HeaderiView.jsp which contains the method GetWelcomeMsg(), so this one retrieve in "request" variable only first and last name...
I suppose the next step is in the NW Developper Studio, so which object will I have to modify ? And How ?
SAP Version:
EP 7.0 SPS15
ECC 6.0
NWDI not deployed.
Thanks in advance to all for your help,
OlivierHi,
Hi Check this .
How to modify the header
Modifying the Masthead iView
Modify com.sap.portal.navigation.masthead
Modifying the masthead par
how to place the modified masthead in place of default masthead in framewor
Thanks and Regards,
gopal.sattiraju -
CLM How to add search-help for extension field(New Company Field) in MA.
Hi all,
Based on demand,I need to extend a new field(Company) in Master Agreement.
But I do not know how to add search-help for this field,just like User Accont page.
Anyone can help me ?thank you very muck.
Regards,
JackyChengHello Jacky,
To combine all the answers above and have a topic-based reply please go through the below steps:
#1. Inactivate the current extension field Company (I see it is actually a String value and this is not what you want to have)
#2. Go to Setup -> System Setup -> Extension Reference Types
Check if you already have a Company reference type
If not, create a new Extension Reference Type for Class Company. Fill in all required information.
#3. Create a new Extension Attribute
Select Data Type: Object Reference
Now you can add the Company type as reference
Regards,
Bogdan Toma -
HOW TO: Add /manipulate columns for a GridControl
HOW TO: Add /manipulate columns for a GridControl when the columns (attributes) are from different entity objects.
This HOWTO describes the basic steps of using attributes from different entity objects for a GridControl.
One way you can create a GridControl which contain attributes from different entity objects is to create a view object and base it on the entity objects which contain
the desired attributes.
Here are the basic steps:
1.Create a new view object (or use an existing view object) by selecting File>New from the menu, clicking the Business Components tab and double-clicking
on the View Object icon.
2.In the View Object wizard change the name to something meaningful.
3.Select the entity objects you will base your view object on.
4.Nivigate to the attribute screen and select the attributes you would like to include in your view object from each entity object. At this point you can also create
a new attribute by clicking the "New" button. The new attribute can be a concatenation of other attributes, derived from a calculation etc.
5.In the query panel of the View Object wizard, click "Expert mode" and enter a query statement. You write complex queries such as decoding a set of attribute
values.
6.Add your newly to your newly created view object to the application module by double-clicking on the application module in the navigation pane and selecting
your view object from the list.
7.Create a new row set.
8.Bind row set to a query by editing their queryinfo property and selecting your view object and its attributes from the queryInfo pane.
9.Create a GridControl and bind it to the row set by editing the dataItemName property of the GridControl. Since the GridControl is bound at the row set level
all of the related attributes are automatically added.
nullMichael,
Are you intending this as a commercial solution or a work around?
To take an existing equivalent, one would build a view in the database tailored for each grid in an Oracle Forms application. Or a separate query layered over tables for each form/grid in a Delphi or Access application? Even if it is ninety nine percent the same over half a dozen forms/grids?
And now you've added a whole slew of "slightly different" rowSetInfos to maintain.
So if you wanted to add a column that needs to appear everywhere... you've just increased the workload multi-fold?
That would be a management nightmare, wouldn't it? Not to mention yet more performance cost and a slower system?
Hmmmm..... I'm not sure I like where this is headed... someone needs to do some convincing...
null -
Hi All how to add new payscale for an employee in sap hr-abap,its urgent
Hi All ,
how to add new payscale for an employee in sap hr-abap,its urgent.
Message was edited by:
bharat kumar
Message was edited by:
bharat kumarHi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji -
How to add a border for Panel (jdk 1.1) ?
how to add a border for Panel (jdk 1.1) ?
Border's are a Swing feature, you will have to draw one by yourself (extend Panel and override paint()).
-
How to add F1 help for a field on ALV grid
Hi All,
When we execute a program, the output is displayed using ALV grid.
on the ALV grid, if we press F1 on a field, it should popup the help document.
How to add F1 help for a field on ALV grid.
Thank you all in advance.fill field LVC_S_FCAT-ROLLNAME of your fieldcatalog in method SET_TABLE_FOR_FIRST_DISPLAY
A. -
How to add search help for standard field LIKP-TRAID
Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
AbhiHi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable. -
How to add a port for a IP cam in the airport extreme setting? thx!
I has buy a IP cam, but I don't know how to add a port for a IP cam in the airport extreme setting? (I can see the IP cam in local, but not the internet.) Many Thanks!
atwoodjordan, Welcome to the discussion area!
See Steve Newstrum's user tip "How do I use Port Mapping (Part I)". When it talks about giving your Mac a static IP address just substitute camera instead. -
How to add extra options for style of images in pages. iPad version has far more options than Mac version
Thank you, you made me go look again and I realised the ones I use on the iPad are under Borders not style and they are on Mac also. I feel a bit silly but I wouldn't have got there without your prompting. Do you mean by "create your own" using the borders and then saving as a style or can you create something that is not in either?
Thanks again -
How to add indian english for siri?
how to add indian english for siri... siri no use for indian user...
You cannot, it is something only Apple can do.
The phone merely listens to the commands, digitizes into some proprietary format and sends it to Apple's servers, who do the heavy lifting of interpreting what you want. So you can't hack the language into the phone. -
Revision: 18814
Revision: 18814
Author: [email protected]
Date: 2010-11-24 09:31:56 -0800 (Wed, 24 Nov 2010)
Log Message:
Add manual test for BLZ-594 with instructions on how to run the test.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-594
Modified Paths:
blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/remoting-config.mods.xml
Added Paths:
blazeds/trunk/qa/apps/qa-manual/WEB-INF/src/test/
blazeds/trunk/qa/apps/qa-manual/WEB-INF/src/test/RpcTest.java
blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/
blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/BLZ-594.mxml
blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/readme.txtYou do have a very complex looking site and may need several tables in mysql to handle all that data. If you knew to phpmysql I would suggest taking a look at this tutorial it will help get you started in understanding how to $_GET info from a database and also how to $_POST data to a database. I am no expert just learning myself and I found this very helpful. This is the link http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
There are also many tutorials on Youtube to help build a CMS Content Management Site I would suggest the following: -
http://www.youtube.com/user/phpacademy
http://www.youtube.com/user/betterphp
http://www.youtube.com/user/flashbuilding
And many more on my channel here
http://www.youtube.com/user/Whisperingonthewind
CMS's are easier to maintain, add edit and delete content.
I have also recently bought a Book by David Powers Training from the Source very helpful.
Anyway hope you get it sorted. -
How to find table information for a datasource?
Hi,
Can you please tell me how to find table information for a datasource. I am not getting much help from help.sap.
I am trying to find table information for below datasources. We are creating DSO's for the below mentioned datasources, for some we have standard DSO's(0WBS_O06), for others I am trying to create
0CO_OM_NWA_1,
0CO_OM_NWA_2,
0CO_OM_WBS_1,
0CO_OM_WBS_6
Please help me.
Regards,
Bob.Hi BOB,
Another option to find the table information...
inorder to get the tables names involved in that particular data source follow the below steps.
1) ST05 --> activate the Trace
2) RSA3 --> enter your data source (for ex: 0CO_OM_NWA_1)
3) Execute
4) Now goto ST05 -> deactivate the trace
5) click on Display trace(F7) button
6) Execute
7) It will display the complete SQL trace
8) Now from the Menu "Trace list" --> select "Combined Table Access"
it will display the complete tables list involved in that data source...
From Table name section you can get the list of tables involved in that data source.
I had traced and took the information of tables involved in that data source 0CO_OM_NWA_1
0CO_OM_NWA_1
AFKO Order header data PP orders
AFVC Operation within an order
AUFK Order master data
COSP CO Object: Cost Totals for External Postings
COSPP Transfer of the Order in the COSP Table to the Project
COSS CO Object: Cost Totals for Internal Postings
COSSP Transfer of the Order COSS Table to the Project
COVREF Coverage Reference Table: All Processing Blocks
COVRES Table of Coverage Results
You can follow the same steps and find the tables for the rest.
Regards
KP -
How to get this information for Conky
Hi people,
My question is how to get this information for show in Conky:
- KDE version.
- Last sync (pacman -Sy) and Last update (pacman -Su)
For the first point could be use a script that execute $ kdesu --version and get information from there.
I have no idea how get information from pacman (may be logs?).
Any ideas?
Thank you.I have had tremendous success with LUA in Conky on Arch. And all you need to to is put the text HI after the "TEXT" line. ^^;
Examples of my LUA usage:
http://fc02.deviantart.net/fs71/i/2010/ … usLink.png
http://kittykatt.silverirc.com/screens/conky-HUD.png
EDIT: Also, I've had success with getting the KDE version by doing the following...
kwin --version | awk '/^Qt/ {data="Qt v" $2};/^KDE/ {data=$2 " (" data ")"};END{print data}'
This is the method I'm currently using in screenFetch. Tested it a couple of times myself, but besides that, I'm not sure if it will work or not.
Last edited by kittykatt (2010-04-22 17:52:25) -
How do install the network adaptor for windows 7 with boot camp?
How do I install the network adaptor for windows 7 with boot camp?
boot camp forum: https://discussions.apple.com/community/windows_software/boot_camp
Maybe you are looking for
-
Restore database validate ERROR
I configure RMAN yesterday with the following parameters: CONFIGURE RETENTION POLICY TO REDUNDANCY 2; CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS; CONFIGURE BACKUP OPTIMIZATION ON; CONFIGURE DEFAULT DEVICE TYPE TO DISK; CONFIGURE CONTROLF
-
Help me solve the "ANSWER" problem.
Hello, im new here, and im a new java student. i've written a program. however, the program asks the user a question, the user needs to answer either 1 or 2. i need the program to ask the question as long as the user doesnt enter 1 or 2. so if the us
-
Hello All, We are using lookup field value in assignment. field1 is lookup field and Lookup table has only one field Name Name a b c Field2 is lookup field and Lookup table(Cross Ref) has 2 fields Name1 Name2 Name1 Name2 (Display fie
-
Datagrid and verticalScrollPosition
Hello everyone I have a datagrid with an editable column. When I enter in an editable cell, automatically a new position of vertical scroll bar is set. Why? How can I prevent it? Thanks
-
Development objects save automatically with out asking package and TR
Hi Experts, Development objects in R/3 dev server are saving automatically with out asking any package and TR . May be the development objects are saving in local package. How can we check in which package the objects are saving Please guide me how t