How to add new data entry and display old data in the same screen in SM30?

Hi, Experts:
We need to use SM30 to maintain a table entry. When I click the button of "New Entries", the table screen becomes blank. I can only add new data but not be able to see the old data existing in the table.
How can I have the new line available for me to add new data at the same time see the data currently existing in the table?
Thanks,
Jenny

Hi, thanks for the reply!
Just to follow up for what we did to disable the delete function for maintaining table records. We hided the Delete button by adding a "MODULE disable_delete" code in Screen Painter. So now only adding records to the table is allowed.
Thanks,
Jenny

Similar Messages

  • How to encode multiple camera views and display them separately on the same page

    Does any one know if this is possible with just one
    encoder/streaming server or would you need multiple encoders to
    send separate views?

    Hello after a long time.
    I have 2 the same capture card. And I am trying to stream to 2 diffrent rtmp server. I start first one and no problem. But when I run second FME instance and select second stream card, first one turns to black and second one shows up. When I close second, first one again comes back.
    What shoul I do for streaming multiple streams form multiple stream cards?
    Best regards.

  • How to add new group entry in Cisco Vpn using powershell

    I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
    $username = 'TestUser'
    $userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
    $credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
    $username,$userPassword
    $password = $credentials.GetNetworkCredential().Password
    Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
    .\vpnclient.exe connect $vpn_profile user $username pwd $password
    Write-Host "You Are Connected"
    cd "C:\"

    Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
    That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
    If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
    on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
    put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
    Update: Added more info; clarified

  • How can I listen to itunes and play a game at the same time on my ipad 4?

    How can I listen to itunes and play a game at the same time on my ipad 4? This means I need to run 2 apps at the same time itunes and my game.  The game has its own sound control so I can turn off its sound while i listen to itunes tracks.  But I don't know how to set it up so the ipad does both.

    Anytime you open an app that has a persistant sound stream - a movie, a podcast, some games - it will overide the music app's stream. nothiong you can do to change it.

  • How can you listen to music and play a game at the same time?

    How can you listen to music and play a game at the same time?
    I am playing music, by starting the Crash Baandicoot Nitro Kart 3D game it shuts off the music playing. Is there a way around this?
    It seems like this should be possible.
    Message was edited by: RuthlessVengeance
    Message was edited by: RuthlessVengeance

    Select the music play list you want to listen to and start it playing. Go back to the home screen and start the app you want to use, music will stop. Press the home button two time quickly and it will bring up a simple control for controling the music. This works for me with all of the apps I have purchased including games. Just a note you can pull up the same music control if the iPod is a sleep and locked by pressing the button three times quickly.
    Mike

  • My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

    My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

    I just did a reset all settings on both.
    Will see where this gets me.
    Thank you for your helpfull input.

  • I have a MacBook Pro 13.3 OS- MAC OS X LION.Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.

    I have a MacBook Pro 13.3 OS- MAC OS X LION.
    Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.
    I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.
    Thank you for any help in this regard that comes fast.

    The details of the kernel-panic report is as follows-
    Interval Since Last Panic Report:  1458653 sec
    Panics Since Last Report:          6
    Anonymous UUID:                    70BA6A**************************************************
    Sun Sep 16 23:00:13 2012
    panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff8000290560, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000800028, CR3: 0x000000000a509005, CR4: 0x00000000001606e0
    RAX: 0x0000000000000001, RBX: 0x0000000000820000, RCX: 0xffffff801122dc40, RDX: 0x0000000000020501
    RSP: 0xffffff80ef3d3da0, RBP: 0xffffff80ef3d3dc0, RSI: 0x000000002b1d78b6, RDI: 0xffffff800342d280
    R8:  0xffffff80ef3d3f08, R9:  0xffffff80ef3d3ef8, R10: 0x000000010d901000, R11: 0x0000000000000206
    R12: 0xffffff800342d280, R13: 0x0000000000000000, R14: 0xffffff8011cd6500, R15: 0x0000000000800000
    RFL: 0x0000000000010206, RIP: 0xffffff8000290560, CS:  0x0000000000000008, SS:  0x0000000000000000
    CR2: 0x0000000000800028, Error code: 0x0000000000000000, Faulting CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80ef3d3a50 : 0xffffff8000220792
    0xffffff80ef3d3ad0 : 0xffffff80002c4794
    0xffffff80ef3d3c80 : 0xffffff80002da55d
    0xffffff80ef3d3ca0 : 0xffffff8000290560
    0xffffff80ef3d3dc0 : 0xffffff800026c9c3
    0xffffff80ef3d3f40 : 0xffffff80002c3fbb
    0xffffff80ef3d3fb0 : 0xffffff80002da481
    BSD process name corresponding to current thread: fsck_hfs
    Mac OS version:
    11E2620
    Kernel version:
    Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
    Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
    System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
    System uptime in nanoseconds: 4850001132
    last loaded kext at 1796984176: com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2 (addr 0xffffff7f80e16000, size 57344)
    loaded kexts:
    com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2
    com.apple.driver.AppleUSBTCButtons    227.6
    com.apple.driver.AppleUSBTCKeyEventDriver    227.6
    com.apple.driver.AppleUSBTCKeyboard    227.6
    com.apple.driver.AppleIRController    312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    33
    com.apple.iokit.SCSITaskUserClient    3.2.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCISerialATAPI    2.0.3
    com.apple.iokit.IOAHCIBlockStorage    2.0.4
    com.apple.driver.AppleFWOHCI    4.8.9
    com.apple.driver.AirPort.Brcm4331    560.7.21
    com.apple.driver.AppleSDXC    1.2.2
    com.apple.driver.AppleUSBHub    5.0.8
    com.apple.iokit.AppleBCM5701Ethernet    3.2.4b8
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleSmartBatteryManager    161.0.0
    com.apple.driver.AppleAHCIPort    2.3.0
    com.apple.driver.AppleUSBEHCI    5.0.7
    com.apple.driver.AppleUSBXHCI    1.0.7
    com.apple.driver.AppleACPIButtons    1.5
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.5
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
    com.apple.nke.applicationfirewall    3.2.30
    com.apple.security.quarantine    1.3
    com.apple.security.TMSafetyNet    8
    com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
    com.apple.driver.AppleUSBBluetoothHCIController    4.0.7f2
    com.apple.iokit.IOBluetoothFamily    4.0.7f2
    com.apple.driver.AppleFileSystemDriver    13
    com.apple.driver.AppleUSBMultitouch    230.5
    com.apple.driver.AppleThunderboltDPInAdapter    1.8.4
    com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.4
    com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.5
    com.apple.iokit.IOUSBHIDDriver    5.0.0
    com.apple.driver.AppleUSBMergeNub    5.0.7
    com.apple.driver.AppleUSBComposite    5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.driver.AppleThunderboltNHI    1.6.0
    com.apple.iokit.IOThunderboltFamily    2.0.3
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
    com.apple.iokit.IOFireWireFamily    4.4.5
    com.apple.iokit.IO80211Family    420.3
    com.apple.iokit.IOEthernetAVBController    1.0.1b1
    com.apple.iokit.IONetworkingFamily    2.1
    com.apple.iokit.IOUSBUserClient    5.0.0
    com.apple.iokit.IOAHCIFamily    2.0.8
    com.apple.iokit.IOUSBFamily    5.0.8
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.7.1
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    177.5
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.driver.DiskImages    331.7
    com.apple.iokit.IOStorageFamily    1.7.2
    com.apple.driver.AppleKeyStore    28.18
    com.apple.driver.AppleACPIPlatform    1.5
    com.apple.iokit.IOPCIFamily    2.7
    com.apple.iokit.IOACPIFamily    1.4

  • How can I get my email and message notifications back on the lock screen after the 5.01 upgrade?

    After the 5.01 Lollipop upgrade I lost my email, text and voice mail notifications on the lock screen on my LG G3.  How do I get them back?

    Still didnt work...i dont know whats wrong.. i want them to look like this...

  • How to create new user account and delete old one?

    Greetings,
    we have wanted to change our alias on the discussions group but understand from the frequently asked questions section that,
    "Once you create an alias, you cannot make changes to it. If you want to change your alias, you will need to create a new User Account".
    However it does not go on to tell us specifically how to now set up a "new User Account". Could someone specify how to do this? And if we do this, how would we then delete the current User Account? Thank you.
    Chris

    Colleen Von Eckartsberg wrote:
    Thanks for the reply.
    However I am still confused. I originally thought the "user account" referred to an account specific to the Discussions Forums, not the general "Apple ID" however your email seems to suggest they are one and the same....Please clarify.
    If so, however I do not think I am able to change my Apple ID. As I am a mobile me user I am required to us my mobile me address for my apple ID.....and do not think I can have two ID's with the same mobile me address.....
    Any additional thoughts are appreciated. Thanks.
    Chris
    Not with the same Primary address, but you can use your MM address as a secondary one. That is how I have my 2 Apple IDs setup. 1 uses my Dot Mac address and the other uses an ISP address as the Primary with the latter having my Dot Mac address as an alternate address.
    Warning, even if you create a new account, you won't be able to use your current ALIAS with the new account.

  • How to place event callback components and "main-VI" components in the same Front Panel?

    What I'm trying to accomplish:
    Place a .NET component, which generates events, and other standard LabVIEW components in the same Front Panel. The standard LabVIEW components should be updated when events are being generated in the .NET component.
    How I tried to solve it:
    Problem:
    The event callback code must reside in a separate event callback VI. In order to "pass the event up" to the main VI I tried to use a global variable. The interrupt does occur:
    but I was hoping that the string indicator would be updated when the event occurred, but it wasn't.
    Questions:
    What's the best way to solve what I try to accomplish? If I want to solve the problem on the picture above, how would I do it (it may not be the best solution, but I'm still curious what's wrong)? Please feel free to be over-explicit when replying as I am novice LabVIEW programmer. Thanks in advance for any help.

    There are two bundle functions for creating clusters. The function simply called Bundle operates almost exactly like the Build Array function I showed. The type of the output cluster depends on whatever you wire in as inputs. You don't have to supply a specific type parameter.
    The function called Bundle by Name takes in a specific type of cluster in the top input and allows you to fill in the values of that specific type of cluster. To create the specific type of cluster you want, you need to create a cluster of string references. Here's how to do that:
    Go to the Front panel and drop down an empty cluster shell.
    Go to the Refnum palette and drop down a Generic Control Refnum. Now here's a cool trick to turn that generic refnum into a string-specific refnum (a so-called strictly-typed refnum). Grab a string from the controls palette and drag it into the Generic Control Refnum. Once you drop it, you'll see the refnum change its icon to display a string picture.
    Make copies of this string refnum (as many as you need) and add it to the cluster shell.
    Now, if you're making specific types of clusters to work with, now is the absolute best time to learn about typedefs if you haven't already. It will save you hours and hours (if not days) of development time in the future. Trust me!
    Jarrod S.
    National Instruments

  • Flush displayed ALV and display normal posting messages on same screen

    Hi,
    I have a requirement wherein i have displayed ALV with execute button on same screen with FI data displayed in ALV.
    Now when user select one particular row and excute it , the requirement is to flush that ALV displayed and display normal
    message such as POSTING DONE
    How can i achieve it ? I am using REUSE_ALV_LIST

    What do you mean by "Now when user select one particular row and excute it "???
    Meaning you do some event like double clicking on that particular row or after selecting it, you will trigger some button?
    For 1st condition, make sure you've created an ALV event.
    If 2nd one, either you create/modify the ALV toolbar.
    Then you can do a simple call screen to exit from that ALV. Or a simple pop up message.

  • How can i send multiple videos and photos, via mail, at the same time?

    you allowed to send only one video or 10(+) photos via mail.
    but can you send both at the same time? so 10(+) photos and a video (or more than one) in one mail?
    because if my mom has birthday pictures or something like that. She likes to be able to send it directly from her iphone to every person she knows in just one mail.
    anyone any tips or tricks?

    Those restrictions are generally part of the email provider, not just the phone. Attachments are restricted due to size, bandwith use, etc. Trying to send that much information in an email attachment is even restricted on a computer. Sharing via photo sites is generally a better option for large amounts of pictures and large video files.

  • Need help in displaying error message on the same screen

    Hi Experts,
    I have written a report which gets called from IW52 by clicking one of the action items. Now in my report when I am trying display an error message it is getting displayed at the bottom of a blank screen. My requirement is to display it at the bottom of the IW52 screen, so that user can rectify the error.
    Please help.
    Regards,
    Sambaran Ray.

    Hi,
    Probably you need to find a way to enhance the standard code.
    But make one thing sure that the code (included bu you) gets fired only when that specific report is being executed. Else it may harm the standard functionality.
    Hope this helps you.
    Regards,
    Tarun

  • How to add in ODBC connection and configuration for data connection

    Hello expert,
    on my computor, there is a oracle client for oracle 10g. now there is new oracle 11g installed , I want to create a ODBC connection to this new database. but when I create ODBC , I can't find server type for oracle 11g , there only has driver for oracle 10g. will you please tell me how to create ODBC for this new DB? will you please tell me where is the configuration file for data source on my computor?
    Many Thanks,

    918440 wrote:
    Hello expert,
    on my computor, there is a oracle client for oracle 10g. now there is new oracle 11g installed , I want to create a ODBC connection to this new database. but when I create ODBC , I can't find server type for oracle 11g , there only has driver for oracle 10g. will you please tell me how to create ODBC for this new DB? will you please tell me where is the configuration file for data source on my computor?
    Many Thanks,So, on this machine you have
    - Oracle 10g client (only), and in a seperate ORACLE_HOME
    - Oracle 11g rdbms
    First, the 10g client will connect quite well to the 11g database
    Second, the 11g database includes the basic client admin software, but the odbc drivers are not installed by default. You have to run OUI and choose 'custom' installation, then select 'windows components' from the list of available components.
    I've never wanted to install the odbc driver as part of the database installation. Only on remote client installations.
    What are you really trying to achieve?

  • How to add new os entry via BCDEDIT ?

    hi friends.
    i am familiar with bcdedit but i have a problem:
    i installed win2008 R2 in drive C: & then installed win7 in drive D: . then for test purposes i deleted win2008 entry from bcd using bcdedit /delete command. now system doesn't show win2008 in boot menu and directly boots into win 7.
    now in win 7 i run this command  bcdedit /create /d "windows 2008R2" /application osloader
    but noting happens & win2008 is not added to my bcd & boot menu.
    have i missed any required steps or commands ?
    thanks in advance

    Hi john.s,
    You can examine with
    Visual BCD Editor the contents of BCD.
    On left pane all existing loaders are listed (as well as all other objects in BCD).
    A loader for Windows 7 / 2008R2 is shown below:
    (Please note that image shows EFI loader. ApplicationPath for BIOS loader is \Windows\system32\winload.exe)
    Elements that must be present:
    ApplicationPath, ApplicationDevice, Description (text for boot menu), OSDevice and SystemRoot. Other elements are optional and if missing have default values - for example locale defaults to en-US.
    To be shown in boot menu one additional element must contain the {GUID} of the loader - DisplayOrder element in {bootmgr} object. DisplayOrder is a list of loader IDs and make up the boot menu. (Instead of the GUID the Description of the loader is shown
    to the user by boot manager when displaying boot menu).
    Usually bcdboot fixes wrong loader entries.
    Maybe you have to delete the partial entry for 2008R2 you have created. (click on loader and select "Delete")
    Visual BCD can create loaders automatically (using F9 key) by scanning all accessible partitions and adding a loader entry if an OS found does not have a corresponding loader entry in BCD.
    thanks a lot

Maybe you are looking for