How to Add new fields to display in VF05
Hello,
I need to add some fields so they are shown in the VF05 - List of all Billing documents. Is this something that needs to be done by ABAP changes or can i modify the layout in config to add those new fields. Because as of now those new fields are not shown in the available list of fields. Any help will be greatly appreciated. Thanks.
Irfan
Hi,
VF05 is a standard report.Her normally all fields will appear.Press (Ctrl+F8) and check whetehr there are any unassigned fields.Here you can change the layout.
If your required fields are not there in the list then you have to develop a code for this.
Copy the standard code from the program "SAPMV65A" and create a Z program.Add your required fields to this one with the help of your ABAPer.
Hope this helps you.
Regards,
Krishna.
Similar Messages
-
How to add New field in SMART forms.
How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PMHow to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM -
How to add new field into dynamic internal table
Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30). "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
here i want to add one more field into <TAB> at LAST position and my
Field name = field_stype and
Field type = 'LVC_T_STYL'
could you please helpme out .Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
<fs_dyntable>, u201C Field symbol to create work area
<fs_fldval> type any. u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c. u201C Input number of columns
DATA: t_newtable TYPE REF TO data,
t_newline TYPE REF TO data,
t_fldcat TYPE slis_t_fldcat_alv,
t_fldcat TYPE lvc_t_fcat,
wa_it_fldcat TYPE lvc_s_fcat,
wa_colno(2) TYPE n,
wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
CLEAR wa_it_fldcat.
move sy-index to wa_colno.
concatenate 'COL'
wa_colno
into wa_flname.
wa_it_fldcat-fieldname = wa_flname.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 10.
APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fldcat
IMPORTING
ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
index = sy-index.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
Set up fieldvalue
CONCATENATE 'VALUE' index INTO
fieldvalue.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
CLEAR wa_cat.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
wa_cat-fieldname = wa_flname.
wa_cat-seltext_s = wa_flname.
wa_cat-outputlen = '10'.
APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_fieldcat = fs_fldcat
TABLES
t_outtab = <t_dyntable>. -
How to add new fields in Reduced message ( in BD53 )
Hi Experts,
How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
Thanks,
NinadHello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S. -
PLz Help me its urgent, how to add new field in mm01 basic data screen
Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee. -
11.5.9/OAF 5.7 : how to add new fields in iProc "search results" page
We need to add new fields into iProc "search results" page - "Personalize Self-Service Defn" is et, we can enter the personalization screens (from both the "master" link at top/right page level or from the link above the region) - anyway cannot find how to add new fields. Do we have to go to AK developer and/or XML files or is it feasable from OAF (as it is with 11510) ? TIA.
It depends on what fields you want to add.
1. If Oracle has included the fields, just render them via personalizations
2. If they are brand new fields:
a) you will need to extend the VO (I do not know the exact name).
b) change the query to get your extra db columns if necesary
c) add transient attributes to the VO and map them to b).
d) Then you need to add the items via personalization and map them to the attributes you created in c)
Check on metalink for the lates version of OAF Dev Guide and Personalization guide.
Thanks
Sandeep -
Query: How to add new fields in ABAP query?
Hi All,
Can any one tell me how to add new fields in the ABAP query output?
We have to add the new fields using query design or we have
to add those in the background program(automatically generated behind query) by selecting new fields in the code?What kind of report? Usually, you have to add the field in the table declaration and then also in the SQL query. After that, include the field in what kind of report you are using.
-
CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0
Hello Experts,
I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
Can you help me?
Thanks in advance.
Caíque EscalerHi
make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
in spro in Define customer-specific search control -> mark fields with X.
and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
Regards
Radek -
How to add new fields to picklist of search criteria for opportunities
Hi Friends,
Could you please tell me how to add new fields to the picklist of search criteria of Opportunities in WEBCLIENT(CRM 2007).
Regards,
VijayDear Vijay,
We are facing the same problem over here.
Have you managed to find a solution? Please share
BR,
Rohit -
How to add new fields to the system form (Ex.expenses to a/r invoice form)
hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQIf I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.
-
How to add new fields in SAP-Query
Hi,
Can any body tell how to add new fields to the existing query.
Thanks a lot,
Bhaskar.hi,
when we create internal tables like. in final table you can include the extra fields.
data : begin of itab_mara,
matnr like mara-matnr,
erdat like mara-erdat,
end of itab_mara.
data : begin of itab_marc,
matnr like marc-matnr,
werks like marc-werks,
end of itab_marc.
data : begin of itab_final,
matnr like mara-matnr,
erdat like mara-erdat,
werks like marc-werks,
date like sy-datum,
status(10) type c, * new fields
end of itab_final.
<select statement>.
Append all the fields to itab.
loop at itab_final.
write :/ itab_final.
endloop.
Reward with points if helpful.
Message was edited by:
Vinutha YV -
How to add new fields in asset master data
Hello,
i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
Thanks.
PedroHi Pedro,
SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
You can configure them @ the following 3 nodes in IMG:
Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
Regards,
Vishal Thakur -
How to add new fields to a data extract
The following data extract program generates an output file which is displayed using a publisher template as a check format report.
Oracle Payments Funds Disbursement Payment Instruction Extract 1.0
How would I add new fields to the generated file? In other words what is the procedure to add new fields to the data extract?
ThanksDo anyone pls advise how to customize the payment extraction program? We also have the similar requirement to extract extra fields to format a payment file.
-
How to add new fields in report painter without library
Hi,.
I have to add new fields in report painter(std one) which is not in any library and so I am not able to add the fields in characteristics. Though I have added zfields in CCR1S but I am not able to add these fileds in characteristics in report painter(say - CJe3 t-code)
How to procedd for this.
Thanks,
MOhanhi,
first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
Pls Suggest -
How to add new field XREF3 in FB50
Hi,
I have a problem with adding the new field XREF3 in FB50 transaction in Items window. I configured field status group in OBC4 and OB41 transaction for XREF3 as optional entry. XREF3 is available in FB01 transaction but not in FB50. I checked table settings for Item window in FB50 using Administrator button. Field XREF3 is not displayed in current settings window. I checked also that structure ACGL_ITEM include the field XREF3. Can you give me any advice how to add the field XREF3 in this enjoy transaction FB50 ?
Thanks in advance.
Zbigniew Debowskihi,
start FB50!
at the upper right corner of the items, there is a small coloured box (blue, yellow and white), click on it
click Administrator in the popup
search for XREF3 in the list, the field Invisible (last coloum) should be ticked, untick it!
click Activate, than Close, than Close again
hope this helps
ec
Maybe you are looking for
-
After updating Apple TV from 1.1 to 2.0, no longer shows up in iTunes 7.6
My Apple TV was working fine with sw ver 1.0 and then 1.1. After updating it to sw ver 2.0, it no longer shows up in my iTunes 7.6 on my Powermac, running the latest Tiger updates, 10.4.11 I've been following the trouble shooting guide, and have powe
-
File adapter sender content Convertion
Hi all, I need to read a flat file and convert it, The file structure is a long row with different types of segments: For example: AA111222333BB4455 where AA - the first segment and BB the second segemnt, I want to convert this string to - <AA> <firs
-
Auto Alerts in Solution Manager!
I am tryting to configure Auto Alerts in Solution Manager 7.0 EHP1. I have configured the system landscape and created the RFC connections to satellite systems. I want to configure system monitoring in SolMan for Satellite systems with Auto Alerts. I
-
Can't use scan to email function sent job to hpeprint
Hello I buy printer model "HP Officejet Pro 8600 Plus" 2 machines setup to 2 locations. Problem when I use function scan-to-email sent file from one machine to hpeprint email another machine. Printer that I sent email to didn't print job out , wh
-
Steve Jobs - wwdc_2006: streaming without delay !! perfect !!
If you get the (very good!!!) stream from Website http://www.apple.com/quicktime/qtv/wwdc06/ you will find out that - if you move the slider - there are no delays for the connect to the new point in the stream. In our delivered streams on the client