HOW TO ADD NEW HR OBJECTS ????

Hi,
i would like to new objects in HR object selection list,especially for PPOCE.
I donot know how to add new objects in the object selection list.
pls anyone who knows this ,could share your knowledge with me.
tks
theresita

Hi Theresita,
All the configuration is in the IMG under Personnel Management > Organizational Management > Hierarchy Framework.  You'll want to review all the entries and related documentation, as adding objects to PPOME/PPOCE is not a simple 'one table' process.  You may need new evaluation paths to support the views you want to see in the framework, so set these up ahead of time.  Parameters to support your configuration are: OM_ARRAYTYPE_DISPLAY; OM_DIS_OBJECTMANAGER; OM_FRAMEWORK_OBJ_NR; OM_FRAM_SCEN_DISPLAY: OM_OBJIM_SCEN_DISPLAY: OM_TABTYPE_DISPLAY.  You'll notice once you add these parameters, you can see the technical names of the scenarios you're working with in PPOME/PPOCE.
Good luck,
Sharon

Similar Messages

  • How to add new EEW Business Objects

    Hi guys,
    could you please give me a solution how to add new business objects? Following are the SAP Objects that you can Enhance Using EEWB:
    ADS Analytical Data Storage
    BUPA Business Partner
    BUPR Business Partner Relationships
    BUSINESS_ACTIVITY Business Activity
    BUSINESS_TRANSACTION CRM Business Transaction
    CATEGORY_ENHANCEMENT Category Extension
    COMPLAINTS Complaint
    COUNTERS Counter
    CRM_CASE СRM Case
    CRM_RPT Resource Planning Tool
    GRANTOR_PROJECT Grantor Project
    INDIVIDUAL_OBJECT Individual Object
    INSTALLED_BASE Installed Base
    LEAD Lead
    MARKETING_ELEMENT Marketing Element
    OPPORTUNITY Opportunity
    PPR Partner/Product Range
    RELTYPE Relationship Category
    SALES_CONTRACT Sales Contract
    SALES_TRANSACTION Sales Transaction
    SERVICE_CONFIRMATION Service Completion Confirmation
    SERVICE_CONTRACT Service Contract
    SERVICE_TRANSACTION Service Process
    SOLUTION_DATABASE Solution Database
    But, i didn`t find how add it.

    Hi,
    To my knowledge adding objects to EEWB is possible by customers, SAP controls which all objects enhancement are possible through EEWB, the objects which you have listed are supported by sap for enhancement via EEWB.
    If you are on CRM 7.0 you can use AET which supports more objects that can be enhanced.(AXTREG - transaction for AET supported objects)
    Hope this helps.
    Cheers,
    Sumit Mittal

  • How to Add New Object?

    HI,
    Any body can say how to add new object. For Example: The Document need to link with Invoice Transaction (T.Code: VF01, Table: VBRK/VBRP).
    Points will be rewarded, if information is useful.
    Tks
    Mani.

    Hi
    You can create New objects using the T.code: SE80.
    You can make an object link to SAP objects that are not shown in the possible entries list. To do this, proceed as follows:
    1. In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
    You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140. The processing logic must follow that of screen 1204 in program SAPLVC130.
    2. Create function module OBJECT_CHECK_XXXX (XXXX = object name) If the object can be classified, this function module already exists .
    Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
    Regards
    S.Sivakumar
    Reward points if useful----

  • How to add new infoobject to existing cube or dso?

    Hi all,
    Can we add new infoobject to exixting cube in BW 3.5 ver? if yes how can we add? Please provide me steps.
    Thank you.
    Sunil

    Hi Sunil,
    If you want to add new info object to the IC or DSO which is already holding data - then you need to make a copy of that particular DSO/IC and load the data into dummy.
    Now delete the data from the IC/DSO to which you want to add the new info object. once the data is deleted it will allow you to add new info object to you IC/DSO.
    save it and activate the IC/DSO
    load the data from Dummy DSO and from new run on wards the newly updated info object will also get updated(historical data will not be updated if its newly added to DS as well).
    If you want the historical data for the newly added field then you need to drop the compelte data and need to extract from source.
    Note: You can't include the new info objects are change the existing info objects if there is data exist in the IC/DSO
    Regards
    KP
    Edited by: prashanthk on Dec 31, 2010 10:54 AM

  • How to add new fields in the EBP front end..

    Hi All,
    Can any one let me know the process of how to add new fileds in the shopping cart creation screens by using the "Tag Browser" option in the Object navigator.
    Best Regards,
    Mahesh. J

    Hi
    <b>Please go through the following links for more details and examples -></b>
    http://help.sap.com/saphelp_47x200/helpdata/en/a2/8c6eeb2d8911d596a000a0c94260a5/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/d3/5ecbe22a8a11d5991f00508b6b8b11/frameset.htm
    This will definitely help.
    <u>For adding customer fields to the Shopping cart, you need to refer SAP OSS Bote 672960 and 485891.</u>
    Do let me know, incase you need any other details.
    Regards
    - Atul

  • How to add a container object in a station globals

    Hi,
    How to add a container object in a station globals

    Hi radlou,
    This might be what you're looking for:
    NewSubProperty Method
    Syntax
    PropertyObject.NewSubProperty ( lookupString, ValueType, asArray, typeNameParam, options)
    Purpose
    Creates a new subproperty with the name the lookupString parameter specifies.
    Parameters
    lookupString As String
    [In] Pass the lookup string for the new subproperty to be created. If you pass a lookup string with multiple levels (such as "x.y.z"), this method creates all of the necessary intermediate container objects. Refer to lookup string for more information about the strings you can use.
    ValueType As PropertyValueTypes
    [In] Pass the type of value you want the new subproperty to store.
    asArray As Boolean
    [In] Pass True to make the new subproperty an array whose elements are of the type you specify in valueType.
    typeNameParam As String
    [In] Pass the name of an existing type if you want to create the new subproperty as an instance of a named type. Otherwise, pass an empty string. If you pass a type name, you must pass PropValType_NamedType for the ValueType parameter. Refer to NamedPropertyTypes for a list of built-in named types.
    options As Long
    [In] Pass 0 to specify the default behavior, or pass one or more PropertyOptions constants. Use the bitwise-OR operator to specify multiple options. You do not need to pass the InsertIfMissing option to create the new subproperty. Pass DoNothingIfExists if you want the method to not report an error if the subproperty already exists.

  • How to add new tab page to equiment ?

    Dear Guru's
    i created the new equipement category K by coping the standard S.when i am creating the equipment while using equipment category S i am getting tab pages General,Location,organization,structure,Sales and Distribution.
    But while using the equipment category K for creating the new equipment i am getting the tab pages General,Location,organization,structure 4 only.
    why the 5 one Sales and Distribution is not coming ?
    how to add new tab page like Partners ?In that fields like sold to party,ship to party ?
    Could anybody help me in this regards
    Thank you
    suribabu

    In Equipment category creation config in IMG, check for the View Profile for both the equipment category S & K.
    For adding new tab, follow the IMG path.
    PM & CS => Master data => Technical Objects => General Data => Set view profiles for Technical objects
    Select the View profile which has been assigned to your equipment category & click Activity & layouts of views. In that screen, under seq.no, select the Partners.
    Do the same for other requried tabs based on your requirement.
    If there are same profile assigned to both equipment category, go to equipment creation creation => Edit => view selection. There you will find the required tabs.

  • How to add New status values in product

    Hi,
      In product master COMMPR01 presently system is shwoing only two vaues Blocked (ERROR), Blocked (Warning), even I have downaloded the sales staus from ECC to CRM using R3AS object 'DNL_CUST_PROD3' but on the screen system is not shwoing thos values.
    How to add new values in staus field.
    Regards,
    zafar

    Hi,
    Refer these links
    Re: GR for a production order
    status profile
    Regards,
    Vishal

  • How to add new slides in iAD Producer?

    Hello, there!
    I am trying to producer a new slide where I can write text in iAD.
    I have problems with it though and can you please tell me how to add new slides, where I can either write text or add new objects or assets?
    Also when I try to use the CAROUSEL, I can only put it there, but once I put the asset image on it, it doesnt work - I can't place the image in the center of each boxe and it doesn't go full screen once I click on on it through my iPod Touch (5th Generation).
    Please answer me those questions and I would be very happy indeed!

    Contact the developer. You question does not seem to be related to the iPod touch. Also, there is a general's developer's forum:
    https://discussions.apple.com/community/developer_forums

  • How to add new group entry in Cisco Vpn using powershell

    I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
    $username = 'TestUser'
    $userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
    $credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
    $username,$userPassword
    $password = $credentials.GetNetworkCredential().Password
    Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
    .\vpnclient.exe connect $vpn_profile user $username pwd $password
    Write-Host "You Are Connected"
    cd "C:\"

    Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
    That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
    If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
    on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
    put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
    Update: Added more info; clarified

  • How to create new authorisation object for Transactions?

    Hi,
    How to create new authorisaton object and how to assign that object on a transaction code?
    Case ->
    The transaction code VL01N have the object called V_LIKP_VST under Class "LE_V" that have two auth. fields. one is 'Activity' and other one is "Shipping Point/Receiving Point".
    Here I want to add "Storage location" also. I have created one object called "Z_LIKP_VST" under same calass "LE_V". and added "Activity", "Shipping Poing/Receiving Poing" and "Storage Location". After that I added that object ("Z_LIKP_VST") for particular transaction through "SU24". I maintained the "Display check indicator" for VL01N.
    I created one new role and assigend the particular transacation for a user. but still SAP taking  V_LIKP_VST insted of Z_LIKP_VST.
    How can I change my Z_LIKP_VST on profile.
    Please help
    Thanks in Advance
    Lal

    Hi Kariyath,
    I suppose its not about interest but a MUST.. sorry but.. unless u include the Logic in the program how can SAP pick these custom Z objects ?
    after u create them and assign to a Tcode in SU24 there is no logic to check these objects. Frankly i see no other chance.... unless SAP comes to us with a great easy way to input these Custom objects
    Keep looking and please Update me if u have any Inputs....on this front..
    All the Best
    Br,
    Sri
    Award points for helpful answers

  • How to add new group attribute in OAM?

    Hi,
    I'm using SunONE DS 5.2 P4 as my Oracle Access Manager repository. I would like to add some new attributes to Users and also to Groups.
    I am able to add the new attributes to users by adding the attributes to the oblixorgperson object class in SunONE DS, and then the new attributes appear in the OAM web admin (under the inetorgperson object class).
    I have tried to do similar thing to add attributes to Groups. I have added the new attributes to the oblixgroup object class in SunONE DS, but the new attributes do not appear in the OAM web admin anywhere (e.g., under the groupofuniquenames, etc. object class).
    Can anyone tell me how to add new attributes to SunONE DS so that they are available under Groups in OAM?
    Thanks,
    Jim Lum

    Have you added the auxiliary class "oblixgroup" to the Group Manager?
    1. Ensure that you have configured the object class or classes that you want to add in the Common Configuration tab.
    2. From the Identity System Console, select Group Manager Configuration, then click Configure Group Type.
    3. Click Configure Group Type Panels, then click Create.
    4. In the topmost menu, select the object class that you want to add.
    5. In the Panel Label field, enter the label that you want to display to end users when they view elements from this object class in the Group Manager.
    6. Select the Panel Information Is Complete check box.
    7. Click Save.
    The object class is added. You can view this new object class by clicking the Tabs link in the left navigation pane for Group Manager Configuration.

  • How to add a ChartOfAccounts object into the database.

    how to add a ChartOfAccounts object into the database. please shows sample code
    thanks

    Dim CoA As SAPbobsCOM.ChartOfAccounts
                CoA = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oChartOfAccounts)
                CoA.Code = 11223344
                CoA.ExternalCode = "a1234"
                CoA.ForeignName = "f Test Account"
                CoA.Name = "Test Account"
                CoA.AccountType = SAPbobsCOM.BoAccountTypes.at_Other
                CoA.ActiveAccount = SAPbobsCOM.BoYesNoEnum.tYES
                CoA.FatherAccountKey = 100001
                If CoA.Add <> 0 Then
                    MessageBox.Show(oCompany.GetLastErrorDescription)
                Else
                    MessageBox.Show("Added Account")
                End If
    Remember the father account key must be a valid account number in the company where you are trying to add the new account.  (The G/L Account code seen in the SBO client)

  • How to add new fields in Reduced message ( in BD53 )

    Hi Experts,
    How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
    Thanks,
    Ninad

    Hello,
    I think of something like:
    First, you create extension, with transaction WE30.
    Then, reduce your idoc, your extension should also be proposed.
    Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
    regards.
    F.S.

  • PLz Help me its urgent, how to add new field in mm01 basic data screen

    Hi everyone,
         plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
    Thanks,
    murali.

    Hi Murali,
    when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
    reward if useful.
    thanks
    abdulsamee.

Maybe you are looking for