How to add new network adapter to existing hyper-v server

hello guys
now we have win2k8 r2 with installed hyper-v role.
we had a network adapter with 4 ports and these 4 NICs was installed before adding hyper-v role so we select the these 4 NICs when installing the hyper-v role as usual.
after that, we add other new network adapter with 4 NICs.
the problem that we can't see the new 4 NICs in hyper-v manager to create external connection.
any suggestions ??

Hi eng.magdy87,
Please ensure that the new NIC works properly .
I mean that you can try to set IP for that NIC to check if it works .
By the way , I added a new NIC for my hyper-v host (2008R2 ) and I can select it in virtual machine manager .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • How to add new row and update existing rows at a time form the upload file

    hi
    How to add new row and update existing rows at a time form the upload file
    example:ztable(existing table)
    bcent                      smh            nsmh         valid date
    0001112465      7.4                       26.06.2007
    0001112466      7.5                       26.06.2007
    000111801                      7.6                       26.06.2007
    1982                      7.8                       26.06.2007
    Flat file structure
    bcent                       nsmh         valid date
    0001112465     7.8     26.06.2007  ( update into above table in nsmh)
    0001112466     7.9     26.06.2007  ( update into above table in nsmh) 
    000111801                     7.6      26.06.2007 ( update into above table in nsmh
    1985                      11              26.06.2007   new row it should insert in table
    thanks,
    Sivagopal R

    Hi,
    First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
    Then :
    Loop at it.
    *insert or modify as per your requirement.
    Endloop.
    Regards,
    Srilatha.

  • How to add a network adapter in Windows 2008 Core

    I installed Windows 2008 Core on an older server of mine.  The install worked fine, but I dont think it recognizes the built-in BroadCom NICs.  I downloaded the 2008 drivers and ran the necessary commands to load and install the drivers, aassigned IP settings, but networking still is not working.  Is there a specific command for adding a NIC?

     
    Hi,
    Pnputil.exe is used to manually install, enumerate, or remove third party drivers. We can use the following command to install the driver:
    Pnputil –i –a <path>\<driver>.inf
    In addition, we can use DriverQuery.exe to enumerate and display a list of the installed device drivers, including the driver properties.
    For more information about Pnputil.exe and DriverQuery.exe, you can refer to Windows Help and Support in Windows Server 2008.
    Now I suggest confirming if the network adapter is recognized by Device Manager. To do so, please enable remote administration of server core and then check whether the network adapter is listed in Device Manager. To allow remote connection to Device Manager, please type the following command:
    Netsh advfirewall firewall set rule group=“remote administration” new enable=yes
    In addition, you must first enable the Allow remote access to the PnP interface policy setting. To do this, on a computer running Windows Vista or a full installation of Windows Server 2008, open the Local Group Policy Editor MMC snap-in, connect to the computer running a Server Core installation, navigate to Computer Configuration\Administrative Templates\Device Installation, and then enable Allow remote access to the PnP interface. Restart the computer running a Server Core installation.
    Note that when Device Manager is used remotely, it is read-only.
    Hope it helps.
    Tim Quan - MSFT

  • BAPI_REQUIREMENTS_CHANGE - How to add new qty without refreshing existing

    Hello ,
    I am using this bapi the problem i am facing BAPI_REQUIREMENTS_CHANGE.
    Problem -
                    How to overwrite existing values.

    Hi Andre,
    Here is the description of the tables:
    table with the NEW content of: EBAN
    data: begin of xeban                           occurs 20.
            include structure ueban                         .
    data: end of xeban                          .
    table with the OLD content of: EBAN
    data: begin of yeban                           occurs 20.
            include structure ueban                         .
    data: end of yeban                          .
    table with the NEW content of: EBKN
    data: begin of xebkn                           occurs 20.
            include structure uebkn                         .
    data: end of xebkn                          .
    table with the OLD content of: EBKN
    data: begin of yebkn                           occurs 20.
            include structure uebkn                         .
    data: end of yebkn                          .
    Regards,
    Nitin.

  • How to add new fields in SAP-Query

    Hi,
    Can any body tell how to add new fields to the existing query.
    Thanks a lot,
    Bhaskar.

    hi,
    when we create internal tables like. in final table you can include the extra fields.
    data : begin of itab_mara,
             matnr like mara-matnr,
             erdat like mara-erdat,
             end of itab_mara.
    data : begin of itab_marc,
             matnr like marc-matnr,
             werks like marc-werks,
             end of itab_marc.
    data : begin of itab_final,
             matnr like mara-matnr,
             erdat like mara-erdat,
             werks like marc-werks,
             date like sy-datum,
             status(10) type c,  * new fields
             end of itab_final.
    <select statement>.
    Append all the fields to itab.
    loop at itab_final.
    write :/ itab_final.
    endloop.
    Reward with points if helpful.
    Message was edited by:
            Vinutha YV

  • How to add new fields to the DME file in F110

    Hi,
    We have a requirement add new fields to the file that is used in  F110.
    .I did go in to DMEE transaction but I hae no idea how to add new fileds to the existing file.
    Can anybody please help me in resolving the issue.
    Thanks
    Venkat
    Edited by: Venkat R on Jun 8, 2009 8:45 AM

    Hi,
    There is no function module for that, We have created our own function module and attached to that field.
    Refer the below code. This will fetch the document number.
    DATA: lwa_item   TYPE dmee_paym_if_type,
            l_fpayp   TYPE fpayp,
            l_fpayhx TYPE fpayhx,
            first_flag TYPE c,
            lv_lifnr   TYPE lifnr,
            voucher_id TYPE string,
            voucher TYPE string,
            invoice_id TYPE belnr_d,
            voucher_len1 TYPE i,
            voucher_len TYPE i.
      TYPES:
      BEGIN OF lt_regup,
            xblnr TYPE xblnr1,
            belnr TYPE belnr_d,
      END OF lt_regup.
      DATA: lt_regup TYPE STANDARD TABLE OF regup,
            lv_regup TYPE regup.
    Hope this helps.
    Raja.A
    Edited by: Raja.A on Feb 16, 2011 7:17 PM

  • How to add new class to existing DC (Web Dynpro project)

    Hi,
    How can I add new class to an existing DC (Web Dynpro project)?
    I tried adding it using File - New - Other - Java - Class, but after a build of the DC the new class (and its contents    ) was completely removed.
    Then I created a new DC (java project) and created a new class in that DC. This went fine, but I got into problems because of circular referencing between the new & the old DC, so no build was possible.
    This can't be difficult, does somebody knows how to do it?
    My temporary solution is to add the classdefinition to an exisiting .java file. Very ugly.
    Thanks,
    Jeroen

    Hi Jeroen,
    where did you create the class? If the *.java file is placed in the src/packages folder it should not be deleted by a build. (I suspect you created it in the gen_wdp folder?)
    Regards,
    Marc

  • How can I add new row/column into existing jTable?

    Hi add!
    Can you help me how can I add new row/column into existing jTable?
    Tnx in adv!

    e.g
    Create two buttons inside the Table ( "Add New Row" ) and ("Add new Column")
    their handlers are:
    add new row:
    //i supose u already have
    DefaultTabelModel tablemodel = new DefaultTableModel(rowdata, columnNames);
    //and   
       JTabel jtable = new JTable(tablemodel);
    // Handler (row)
    jbtAddRow.addActionListener(new ActionListener(){
       public void actionPerformed(ActionEvent e) {
          if(jtable.getSelectedRow() >= 0 )
              tablemodel.insertRow(jtable.getSelectedRow(), new java.util.Vector());  
           else  
                tablemodel.addRow(new java.util.Vector());
        });to add new columns its the same but inside actionPerformed method:
    ask for e.g "Whats the name for the new column"
    then,
       tablemodel.addColumn(nameOfColumn, new java.util.Vector());   Joao
    Message was edited by:
    Java__Estudante

  • How do I add new photos to an existing photobook album?

    I'm creating a photobook and nearly finished it but want to add some more photos that weren't in the original album I used.  Can anyone advise how you add new photos to it that you can then select to go into the Photobook?  I can't find any way to add new photos so they appear in the Photobook Browser - do I have to start again?  I'm using iPhoto '09.

    drag them from an event or album to the book project under keepsakes
    You really should take the tutorial - under the help menu ==> iPhoto help ==> chapter 7 - making a book - read the help topic and watch the movie
    LN

  • HT1296 how to add new photos without deleting the existing photos in ipad

    Hi,
    Can anyone tell me how to add new photos/PDF books from my PC to iPad without deleting the exsting data in iPad?

    Hello AJ2349
    If it is prompting you that it will replace the data on your iPhone, then that is typically the result of syncing with a different computer. The only way you can bypass that is to replace the media on your device and then sync. Now it will only replace items that would be considered purchased items like music, movies, TV shows and Apps and would not delete any pictures from your iPhone. Alternatively you can setup a Shared Photo Stream and then add the Photos there without syncing your iPhone with your computer. Check out the articles below for more information.
    iOS: Issues syncing content with multiple computers using iTunes
    http://support.apple.com/kb/ts1474
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/ht1535
    iCloud: Shared Photo Streams FAQ
    http://support.apple.com/kb/HT5903
    Regards,
    -Norm G.

  • How to add new line item using BAPI BAPI_CONTRACT_CHANGE for contract-ME32K

    HI Experts,
    how to add new line item using BAPI: BAPI_CONTRACT_CHANGE for existing contract.
    Requirement:
    Already the contract having two line items using ME31K.
    Custom program has to add new line items in existing contract.
    Thanks,
    Sendil

    I got the solution:
    We can do like this:
    1. Get all details using details, BAPI_CONTRACT_GETDETAIL.
    2. After getting results, append new line item. Then use your BAPI.
    Check this posting program.. where this bapi is used, use the same coding technique.
    IDOC_INPUT_PURCONTRACT_CHANGE

  • How to add new T Code FB01L in OBU1

    Dear Expert,
    How to add new T Code FB01L in OBU1
    Regards,
    Alok

    Hi, Alok.
    It is not possible to add new entries to table TSTCP via transaction OBU1 (you can only modify the default parameters for the existing transactions).  However, new default parameters for other transactions can be created via transaction SE93 (trans F-44).  You can review notes 19798 and 310587 for further information.
    I hope this helps.
    M Trein

  • Reg:HOw to add new charactersitics in standard report

    hi all
    HOw to add new charactersitics in standard report
    regards
    JK Rao

    You need to copy the std report and make necessary changes in the copied report. SAP does not allow changes to std report. The technical details of the report can be seen by selecting from the menu Extras - technical information. Select the library and Report name. Copy the same using t code GRR1. Carry out necessary changes and SAVE. Before execution, you will have to specify the report group in which report needs to be attached. You can choose and existing group or specify a new one.
    Regards
    Rakesh Pawaskar

  • How to add new product in interactive demand planning(IDP)

    Hi gurus,
    How to add new product in interactive demand planning(IDP), can you suggest me, when i click data view in IDP, it will show new product.
    Regards
    babu

    Hi Raj,
    Since the New Product is already in MPOS what you need to do in your Data view is to go to "Selection Window" on the left side of the screen(make sure you dont click on the existing selection ids). Select Product at the top, the planning version will come in the next row and then you again select the Product as charateristic and enter the New product name against the Product(Characteristic) and then save it in case you want it to use for your future references. When you will double cilck on the newly made selection id you will be able to see you product with the keyfigure details in right side.
    Please let me know if it works.
    Thanks,
    Anand.

  • How to add new group entry in Cisco Vpn using powershell

    I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
    $username = 'TestUser'
    $userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
    $credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
    $username,$userPassword
    $password = $credentials.GetNetworkCredential().Password
    Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
    .\vpnclient.exe connect $vpn_profile user $username pwd $password
    Write-Host "You Are Connected"
    cd "C:\"

    Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
    That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
    If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
    on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
    put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
    Update: Added more info; clarified

Maybe you are looking for