How to add new os entry via BCDEDIT ?

hi friends.
i am familiar with bcdedit but i have a problem:
i installed win2008 R2 in drive C: & then installed win7 in drive D: . then for test purposes i deleted win2008 entry from bcd using bcdedit /delete command. now system doesn't show win2008 in boot menu and directly boots into win 7.
now in win 7 i run this command  bcdedit /create /d "windows 2008R2" /application osloader
but noting happens & win2008 is not added to my bcd & boot menu.
have i missed any required steps or commands ?
thanks in advance

Hi john.s,
You can examine with
Visual BCD Editor the contents of BCD.
On left pane all existing loaders are listed (as well as all other objects in BCD).
A loader for Windows 7 / 2008R2 is shown below:
(Please note that image shows EFI loader. ApplicationPath for BIOS loader is \Windows\system32\winload.exe)
Elements that must be present:
ApplicationPath, ApplicationDevice, Description (text for boot menu), OSDevice and SystemRoot. Other elements are optional and if missing have default values - for example locale defaults to en-US.
To be shown in boot menu one additional element must contain the {GUID} of the loader - DisplayOrder element in {bootmgr} object. DisplayOrder is a list of loader IDs and make up the boot menu. (Instead of the GUID the Description of the loader is shown
to the user by boot manager when displaying boot menu).
Usually bcdboot fixes wrong loader entries.
Maybe you have to delete the partial entry for 2008R2 you have created. (click on loader and select "Delete")
Visual BCD can create loaders automatically (using F9 key) by scanning all accessible partitions and adding a loader entry if an OS found does not have a corresponding loader entry in BCD.
thanks a lot

Similar Messages

  • How to add new group entry in Cisco Vpn using powershell

    I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
    $username = 'TestUser'
    $userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
    $credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
    $username,$userPassword
    $password = $credentials.GetNetworkCredential().Password
    Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
    .\vpnclient.exe connect $vpn_profile user $username pwd $password
    Write-Host "You Are Connected"
    cd "C:\"

    Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
    That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
    If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
    on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
    put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
    Update: Added more info; clarified

  • How to add new data entry and display old data in the same screen in SM30?

    Hi, Experts:
    We need to use SM30 to maintain a table entry. When I click the button of "New Entries", the table screen becomes blank. I can only add new data but not be able to see the old data existing in the table.
    How can I have the new line available for me to add new data at the same time see the data currently existing in the table?
    Thanks,
    Jenny

    Hi, thanks for the reply!
    Just to follow up for what we did to disable the delete function for maintaining table records. We hided the Delete button by adding a "MODULE disable_delete" code in Screen Painter. So now only adding records to the table is allowed.
    Thanks,
    Jenny

  • How to add new T Code FB01L in OBU1

    Dear Expert,
    How to add new T Code FB01L in OBU1
    Regards,
    Alok

    Hi, Alok.
    It is not possible to add new entries to table TSTCP via transaction OBU1 (you can only modify the default parameters for the existing transactions).  However, new default parameters for other transactions can be created via transaction SE93 (trans F-44).  You can review notes 19798 and 310587 for further information.
    I hope this helps.
    M Trein

  • 11.5.9/OAF 5.7 : how to add new fields in iProc "search results" page

    We need to add new fields into iProc "search results" page - "Personalize Self-Service Defn" is et, we can enter the personalization screens (from both the "master" link at top/right page level or from the link above the region) - anyway cannot find how to add new fields. Do we have to go to AK developer and/or XML files or is it feasable from OAF (as it is with 11510) ? TIA.

    It depends on what fields you want to add.
    1. If Oracle has included the fields, just render them via personalizations
    2. If they are brand new fields:
    a) you will need to extend the VO (I do not know the exact name).
    b) change the query to get your extra db columns if necesary
    c) add transient attributes to the VO and map them to b).
    d) Then you need to add the items via personalization and map them to the attributes you created in c)
    Check on metalink for the lates version of OAF Dev Guide and Personalization guide.
    Thanks
    Sandeep

  • How to add new EEW Business Objects

    Hi guys,
    could you please give me a solution how to add new business objects? Following are the SAP Objects that you can Enhance Using EEWB:
    ADS Analytical Data Storage
    BUPA Business Partner
    BUPR Business Partner Relationships
    BUSINESS_ACTIVITY Business Activity
    BUSINESS_TRANSACTION CRM Business Transaction
    CATEGORY_ENHANCEMENT Category Extension
    COMPLAINTS Complaint
    COUNTERS Counter
    CRM_CASE СRM Case
    CRM_RPT Resource Planning Tool
    GRANTOR_PROJECT Grantor Project
    INDIVIDUAL_OBJECT Individual Object
    INSTALLED_BASE Installed Base
    LEAD Lead
    MARKETING_ELEMENT Marketing Element
    OPPORTUNITY Opportunity
    PPR Partner/Product Range
    RELTYPE Relationship Category
    SALES_CONTRACT Sales Contract
    SALES_TRANSACTION Sales Transaction
    SERVICE_CONFIRMATION Service Completion Confirmation
    SERVICE_CONTRACT Service Contract
    SERVICE_TRANSACTION Service Process
    SOLUTION_DATABASE Solution Database
    But, i didn`t find how add it.

    Hi,
    To my knowledge adding objects to EEWB is possible by customers, SAP controls which all objects enhancement are possible through EEWB, the objects which you have listed are supported by sap for enhancement via EEWB.
    If you are on CRM 7.0 you can use AET which supports more objects that can be enhanced.(AXTREG - transaction for AET supported objects)
    Hope this helps.
    Cheers,
    Sumit Mittal

  • How to add new operand in installation facts through FMs

    Hi,
    Please guide me for the following query:
    How to add new operands in installation facts through Function Module?
    Please guide me with any function module through which i can acheive the above requirement.
    Thanks and Regards

    Hi,
    Thanks for your reply please.
    Through the BAPI which you have specified i have not been able to add any new operand in the installation facts.
    Please guide me with the parameters which are required to be passed to create a new operand entry in the installation facts.
    Please guide.
    Thanks and Regards
    Edited by: MP Vashishth on Aug 11, 2011 1:43 PM

  • How to Add New Object?

    HI,
    Any body can say how to add new object. For Example: The Document need to link with Invoice Transaction (T.Code: VF01, Table: VBRK/VBRP).
    Points will be rewarded, if information is useful.
    Tks
    Mani.

    Hi
    You can create New objects using the T.code: SE80.
    You can make an object link to SAP objects that are not shown in the possible entries list. To do this, proceed as follows:
    1. In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
    You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140. The processing logic must follow that of screen 1204 in program SAPLVC130.
    2. Create function module OBJECT_CHECK_XXXX (XXXX = object name) If the object can be classified, this function module already exists .
    Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
    Regards
    S.Sivakumar
    Reward points if useful----

  • HOW TO ADD NEW HR OBJECTS ????

    Hi,
    i would like to new objects in HR object selection list,especially for PPOCE.
    I donot know how to add new objects in the object selection list.
    pls anyone who knows this ,could share your knowledge with me.
    tks
    theresita

    Hi Theresita,
    All the configuration is in the IMG under Personnel Management > Organizational Management > Hierarchy Framework.  You'll want to review all the entries and related documentation, as adding objects to PPOME/PPOCE is not a simple 'one table' process.  You may need new evaluation paths to support the views you want to see in the framework, so set these up ahead of time.  Parameters to support your configuration are: OM_ARRAYTYPE_DISPLAY; OM_DIS_OBJECTMANAGER; OM_FRAMEWORK_OBJ_NR; OM_FRAM_SCEN_DISPLAY: OM_OBJIM_SCEN_DISPLAY: OM_TABTYPE_DISPLAY.  You'll notice once you add these parameters, you can see the technical names of the scenarios you're working with in PPOME/PPOCE.
    Good luck,
    Sharon

  • How to add new fields in Reduced message ( in BD53 )

    Hi Experts,
    How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
    Thanks,
    Ninad

    Hello,
    I think of something like:
    First, you create extension, with transaction WE30.
    Then, reduce your idoc, your extension should also be proposed.
    Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
    regards.
    F.S.

  • PLz Help me its urgent, how to add new field in mm01 basic data screen

    Hi everyone,
         plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
    Thanks,
    murali.

    Hi Murali,
    when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
    reward if useful.
    thanks
    abdulsamee.

  • How to add new line in message on my S890

    My stock keyboard in Lenovo S890 doesn't have enter key, is this normal ? How to add new line ?
    However this happened only in messages, while using whatsapp the enter key present.

    Hi,
    the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
    nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
    So, I don't see why you need to add a new line in transact move order.
    You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
    Thanks

  • How to add New field in SMART forms.

    How to add new field in the SMART FORMS. Please know me the step.
    Please help me soon.
    Moderator message: Welcome to SCN!
    Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
    Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

    How to add new field in the SMART FORMS. Please know me the step.
    Please help me soon.
    Moderator message: Welcome to SCN!
    Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
    Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

  • How to add new text field in standard report

    how to add new text field in standard report?

    Hi,
    I presume you are talking about a report display in ALV and u wish to add a column to it .
    If it is a global requirement ,as in table being used there in ALV can be modified, then you can append the table and the system should pick up the same automatically from there.
    Otherwise , you can make a Z program . Modify the catalog being used in ALV.
    Regards,
    Shweta

  • How to add new row and update existing rows at a time form the upload file

    hi
    How to add new row and update existing rows at a time form the upload file
    example:ztable(existing table)
    bcent                      smh            nsmh         valid date
    0001112465      7.4                       26.06.2007
    0001112466      7.5                       26.06.2007
    000111801                      7.6                       26.06.2007
    1982                      7.8                       26.06.2007
    Flat file structure
    bcent                       nsmh         valid date
    0001112465     7.8     26.06.2007  ( update into above table in nsmh)
    0001112466     7.9     26.06.2007  ( update into above table in nsmh) 
    000111801                     7.6      26.06.2007 ( update into above table in nsmh
    1985                      11              26.06.2007   new row it should insert in table
    thanks,
    Sivagopal R

    Hi,
    First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
    Then :
    Loop at it.
    *insert or modify as per your requirement.
    Endloop.
    Regards,
    Srilatha.

Maybe you are looking for