How to add new past in mining model and how to update the previous data in the minin model of time series algorithm?

hello,
I creata a mining model and trained it with some data using the sql table.Now I want that when ever I make any Changes in sqltable record. Then I have to chane the data of mining model also.Please provide help.
Thanks in Advance
Shalini Rathore

Hi, thanks for the reply!
Just to follow up for what we did to disable the delete function for maintaining table records. We hided the Delete button by adding a "MODULE disable_delete" code in Screen Painter. So now only adding records to the table is allowed.
Thanks,
Jenny

Similar Messages

I have a new macbook pro running lion and want to update the software on my ipod touch. My old macbook ran 10.4.11 and won't update - but the new computer says I have to update on the computer I normally sync on or my music will be lost. Solution?

I have a new macbook pro running lion and want to update to ios 5 on my ipod touch. My old macbook only has 10.4.11 and can't be updated to lion - and won't update my ipod touch to ios 5. But the message on my new macbook pro says I have to update on the computer I normally use for syncing or my music will be lost. Is there any solution for this?

try exporting your iTunes libary from the old computer to the new one
take a look at this from apple
http://support.apple.com/kb/HT4527
I am not sure you have home shareing with 10.4.11 but if you do it works very nicely
Mike

How to synchronize if one servlet read a file and anothe servlet update the

How to synchronize if one servlet read a file and anothe servlet update the file at a time?

Create a class that holds the reference to the file and do the whole file manipulation just in that class. than synchronize the read and write methodes. A reference to this file handler class can be stored to the servlet context in one servlet and read out from the servlet context in the other servlet.

Hi, I have recently bought a new laptop and when I went to add new songs to my iphone and ipods and there is no music there when i signed into my account on itunes. How do I get it on there?

Hi, I have recently bought a new laptop and when I went to add new songs to my iphone and ipods and there is no music there when i signed into my account on itunes. How do I get it on there? thanks

Copy the entire iTunes folder (not just the music folder) from your old computer to your new one, using one of the methods outlined here: http://support.apple.com/kb/HT4527.

I just bought 15' Mac book pro. as i work a lot on Garageband. I even downloaded all the drummers and loops to update the new Garageband 10.0.1 now my problem is that all my past work which i did on older version on GB, has missing sounds in it.

I just bought 15' Mac book pro. as i work a lot on Garageband. I even downloaded all the drummers and loops to update the new Garageband 10.0.1
now my problem is that all my past work which i did on older version on GB, has missing sounds in it. so here are my questions
1. DO i have to install JAMPACKS on my new Macbook pro?
2. Are JAMPACKS still compatable with the new GB?
3. There is an UPDATE on the new GB on Appstore and once i click it, it goes to billing no detail is provided what this update is for so help!
thanks

3. There is an UPDATE on the new GB on Appstore and once i click it, it goes to billing no detail is provided what this update is for so help!
See: This document explains what the in-App purchase is about.
Expanding GarageBand for Mac (v10.0) content with an in-app purchase
Do you still have your old Mac?
How did you migrate from the old Mac to the new Mac? Did you transfer your old software and documents using Setup Assistant? Then your old GarageBand '11 version should have been migrated, and all your instruments.
if you did not migrate GarageBand '11, copy your old Instruments Library and Loop Library over from the old mac. Copy the following folders to a thumbsdrive and merge the missing dontents into the corresponding folders on your new mac: (from the system library - the top level library folder on your Macintosh HD):
/Library/Application Support/GarageBand/
/Library/Audio/Apple Loops/
And if you would like to continue to use GarageBand '11 for access to missing features, copy also /Applications/GarageBand over, but to a subfolder of Applications. I recommend, to install the old GarageBand as well. It can be used in parallel to GB 10.0, and will come in handy, if your old projects are having problems.
1. DO i have to install JAMPACKS on my new Macbook pro?
2. Are JAMPACKS still compatable with the new GB?
The JamPacks are nice to have, a terrific collection of instruments and loops, but if you did not have them previously, that will not help with your missing instruments. You can instll them by buying Mainstage 3. They work well with GarageBand 10.0
-- Léonie

I downloaded the new 6 software. Me and my boyfriend share the same iTunes account and now every time I text him I also get a copy of the text sent to my from my number. How do I get that to stop?

I downloaded the new 6 software. Me and my boyfriend share the same iTunes account and now every time I text him I also get a copy of the text sent to my from my number. How do I get that to stop?

Go to settings > messages > send & receive
check or uncheck the correct phones numbers and/or email addresses

I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MEASAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER!

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit

There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.

TS1347 when i add new contact to my iphone , and search for it i did't find it but it store in my phone and apperars when called me or i write the no

when i add new contact to my iphone , and search for it i did't find it but it store in my phone and apperars when called me or i write the no

In the Contacts app, select "Groups" in the upper left hand corner.
Then select all the groups that are desired to be displayed.
Select Done.
Now search for the contact(s) in question. Do they appear now?

I have App Store 1.0. MacUpdate Desktop tells me there is a new version 1.0.1. How do I update App Store. MU only takes me directly to App Store. Not much help there, as I don't find how to update the App Store itself. Please write me at guki@broadpark.no

I have App Store 1.0. MacUpdate Desktop tells me there is a new version 1.0.1. How do I update App Store. Mac Update only takes me directly to App Store. Not much help in that, as I don't find how to update the App Store itself.
Regards
Guttorm Kittelsen
<Edited by Host>

Thank you for your advice.
Actually, I am aware that the upgrade is implemented in 10.6.7. However, up until now I haven't been able to upgrade to Mac OS X 10.6.7, as I have software that is not yet compatible. So I wondered how to do it within 10.6.6? May be it is not possible? Anyway, this gave me a push to track the software I use for compatibility, and I found that an update for 10.6.7 now is ready for download, so then I will probably solve two issues at the same time. Takes a little work though. Thank you again for your advice.

How to update the New Depreciation Area in Asset Master Data

Hi,
Please guide me
How to update the New Depreciation Area in the Asset Master Data.
Regards
Srinivas

Hi,
a) The procedure is as follows:
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program
   RAFABNEW :
3.1     Indicator: Leave values initial = not ticked.
           Do not set this indicator if you want the system
           to copy the values from depreciation area 01.
3.2     Indicator: Leave values initial = ticked.
           Set this indicator if you want to open the newly created
           depreciation area without any values i.e. blank.
4. Recalculate depreciation via AFAR and program RAAFAR00.
b) Helpful notes:
430618 (Procedure for setting up new depreciation area)
301113 (Restrictions of RAFABNEW)
421549 (RAFABNEW: Error with closed fiscal years)
c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
regards Bernhard

How to update the recorded scripts as per the new interface

Hi,
I am using E-tester 8.20 and generating the scripts by record and playback. Here my problem is how to update the scripts when new version of user interface (UI) comes. For example, page1 of UI has recorded with 5 text boxes. In the new version of UI, one more text box (6th text box) has been added and that is mandatory filed. So I have to update my scripts as per the new interface to enter a value in the 6th text box. Is there any way to do it? Any kind of help should be appreciated.
Regards,
Vinod

Hi
Are you talking functional or load scripts?
Regards
Alex

How to update the second JComboBox according selection in first JComboBox??

I am having a hard time to update the second JcomboBox according to the selection of the first JcomboBox. For example, the content of the first JcomboBox is {city, rent}. When "city" is selected, the content of the second JcomboBox should be set to a number of cities. When "rent" is selected, the content of the second JcomboBox should be set to a range of rent.
Since I have to detect the selection in actionperformed(), where the JcomboBoxes have been added to a Panel, and my JFrame setContentPane() to this Panel, I don't know how to update the JFrame or the Panel. I can make the old JFrame disappear and a new JFrame appear instead, but this is not what I want. I tried method update(Graphics) and removeAll(), and never made it work.
I would greatly appreciate if anyone could give me any help.

Thanks for your response. I fixed the problem in the following clumsy way:
frame.getContentPane().remove(mainPanel);
mainPanel.remove(box2);
if(box1.compareTo("city")==0)
box2 = new JComboBox(cities);
else if(box1.compareTo("rent")==0)
box2 = new JComboBox(rents);
else if(box1.compareTo("type")==0)
box2 = new JComboBox(types);
box2.setBounds(305, 30, 90, 20);
mainPanel.add(box2);
frame.getContentPane().add(mainPanel);
Maybe there is a better way, but I don't know, and I don't understand your suggestion, could you further explain it? Thanks a lot.
lz22

How to update the test case result in MTM using C#

Hi
I have tried the following code but when I execute the same I am getting the testcase result as "In Progress".
How to update the testcase execution result as Passed.
I tried the below code:
public
static
void UpdateResult()
TfsTeamProjectCollection tfs =
new
TfsTeamProjectCollection(TfsTeamProjectCollection.GetFullyQualifiedUriForName(server));
ITestManagementService tms = tfs.GetService<ITestManagementService>();
ITestManagementTeamProject proj = tms.GetTeamProject(project);
ITestPlan Plan = proj.TestPlans.Find(1);
ITestRun testRun = proj.TestRuns.Create();
testRun = Plan.CreateTestRun(false);
ITestPointCollection points = Plan.QueryTestPoints("SELECT
* FROM TestPoint");
foreach (ITestPoint
p in points)
testRun.AddTestPoint(p,Plan.Owner);// null);
testRun.State = TestRunState.Completed;
testRun.Save();
ITestCaseResultCollection results = testRun.QueryResults();
ITestIterationResult iterationResult;
foreach (ITestCaseResult
result in results)
iterationResult = result.CreateIteration(1);
foreach (ITestStep
testStep in result.GetTestCase().Actions)
ITestStepResult stepResult = iterationResult.CreateStepResult(testStep.Id);
stepResult.Outcome = TestOutcome.Passed;
iterationResult.Actions.Add(stepResult);
iterationResult.Outcome = TestOutcome.Passed;
result.Iterations.Add(iterationResult);
result.Save();
results.Save(true);
testRun.Save();
testRun.Refresh();

Hi Mohammed,
Sorry for my delay.
According to your code, I have been modified your code in my side and it can work fine. So you can refer the following code to check your issue in your side.
Reference:
publicstaticvoidUpdateResult()
TfsTeamProjectCollectiontfs
= newTfsTeamProjectCollection(TfsTeamProjectCollection.GetFullyQualifiedUriForName(server));
ITestManagementServicetms
= tfs.GetService<ITestManagementService>();
ITestManagementTeamProjectproj
= tms.GetTeamProject(project);
ITestPlanPlan = proj.TestPlans.Find(1);
IStaticTestSuitesuite
= Plan.RootSuite.SubSuites.Where(s
=> s.Id == 1339).First()
asIStaticTestSuite;
ITestCasetestcase
= null;
testcase
= suite.Entries.Where(e
=> e.Title == "login").First().TestCase;
ITestRuntestRun
= project.TestRuns.Create();
testRun
= Plan.CreateTestRun(false);
ITestPointCollectionpoints
= Plan.QueryTestPoints("SELECT * FROM TestPoint WHERE TestCaseId ="+
testcase.Id);
foreach(ITestPointp
inpoints)
testRun.AddTestPoint(p,
Plan.Owner);// null);
//testRun.AddTestPoint(p, null);
testRun.State =
TestRunState.Completed;
            testRun.Save();
ITestCaseResultCollectionresults
= testRun.QueryResults();
ITestIterationResultiterationResult;
foreach(ITestCaseResultresult
inresults)
                iterationResult = result.CreateIteration(1);
foreach(ITestSteptestStep
inresult.GetTestCase().Actions)
ITestStepResultstepResult
= iterationResult.CreateStepResult(testStep.Id);
                    stepResult.Outcome
= TestOutcome.Passed;
                    iterationResult.Actions.Add(stepResult);
               iterationResult.Outcome
= TestOutcome.Passed;
result.Iterations.Add(iterationResult);
result.Outcome
= TestOutcome.Passed;
result.State = TestResultState.Completed;
result.Save(true);
testRun.Save();
testRun.Refresh();
Note: you will need to
base on your requirement to modify the code such as modify the testsuite id and title in your side.
In addition, I find a blog about TFS API that can help you:
# Code snippets on Test Management APIs
http://blogs.msdn.com/b/aseemb/archive/2012/08/07/code-snippets-on-test-management-apis.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to update the table value in the valuechange event?

I have an input field in the datatable with the valueChangeListener
<rich:dataTable id="cart" value="#{cart.cartList}" var="item">
<h:inputText value="#{item.cost}" id="qty" valueChangeListener="#{items.updateCost}" onchange="submit()">
<h:outputText value="#{item.errorMsg}"> </h:outputText>
in the backing bean
     Item item = (Item) model.getRowData();
// do some update, if the cost too larger, change to max_cost
     item.setCost(max_cost);
     item.setErrorMsg("Error Msg");
After calling the valuechange method, the screen output doesn't update the cost.
How to update the table value in the valuechange event?

As you're misusing the valueChangeListener to set another input field, you need to skip the update model values phase. Otherwise the value set in the valueChangeListener will be overridden by the submitted value. You can do this by calling the FacesContext#renderResponse() inside the valueChangeListener method. This will shift the current phase immediately to the render response phase, hereby skipping the update model values and invoke application phases.

How to add new past in mining model and how to update the previous data in the minin model of time series algorithm?

Similar Messages

Maybe you are looking for