How to add new system call in solaris ?

Hi,
I want to add new system call in solaris. please inform me steps for adding new system call in solaris.
Thanks in advance,
Mahantesh.

Here's a Solaris 7 example I know there are others ...
http://access1.sun.com/cgi-bin/rinfo2html?267899.faq
I haven't seen a good example of how to support both the 32 and 63-bit environment.

Similar Messages

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

How to add new text field in standard report

how to add new text field in standard report?

Hi,
I presume you are talking about a report display in ALV and u wish to add a column to it .
If it is a global requirement ,as in table being used there in ALV can be modified, then you can append the table and the system should pick up the same automatically from there.
Otherwise , you can make a Z program . Modify the catalog being used in ALV.
Regards,
Shweta

How to add new fields in asset master data

Hello,
i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
Thanks.
Pedro

Hi Pedro,
SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
You can configure them @ the following 3 nodes in IMG:
Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
Regards,
Vishal Thakur

How to add New status values in product

Hi,
In product master COMMPR01 presently system is shwoing only two vaues Blocked (ERROR), Blocked (Warning), even I have downaloded the sales staus from ECC to CRM using R3AS object 'DNL_CUST_PROD3' but on the screen system is not shwoing thos values.
How to add new values in staus field.
Regards,
zafar

Hi,
Refer these links
Re: GR for a production order
status profile
Regards,
Vishal

How to add new data file

Hi Friends,
We have 4 below file systems.
Sybase/TST/sapdata_1
Sybase/TST/sapdata_2
Sybase/TST/sapdata_3
Sybase/TST/sapdata_4
Already we have added one data file each in sapdata_1 and 2. Sapdata3 and 4 are emptry.
How to add new data file in sapdata3 or 4.
Please provide syntax for creating a new data file and steps for the same.
Regards,
Karthik.

Just for the record: you have here the DBACockpit documentation:
https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000571562012E
And this is a sample of the extend to be executed:
Regards,
Victoria.

How to add new group entry in Cisco Vpn using powershell

I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
$username = 'TestUser'
$userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
$credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
$username,$userPassword
$password = $credentials.GetNetworkCredential().Password
Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
.\vpnclient.exe connect $vpn_profile user $username pwd $password
Write-Host "You Are Connected"
cd "C:\"

Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
Update: Added more info; clarified

How to add new group attribute in OAM?

Hi,
I'm using SunONE DS 5.2 P4 as my Oracle Access Manager repository. I would like to add some new attributes to Users and also to Groups.
I am able to add the new attributes to users by adding the attributes to the oblixorgperson object class in SunONE DS, and then the new attributes appear in the OAM web admin (under the inetorgperson object class).
I have tried to do similar thing to add attributes to Groups. I have added the new attributes to the oblixgroup object class in SunONE DS, but the new attributes do not appear in the OAM web admin anywhere (e.g., under the groupofuniquenames, etc. object class).
Can anyone tell me how to add new attributes to SunONE DS so that they are available under Groups in OAM?
Thanks,
Jim Lum

Have you added the auxiliary class "oblixgroup" to the Group Manager?
1. Ensure that you have configured the object class or classes that you want to add in the Common Configuration tab.
2. From the Identity System Console, select Group Manager Configuration, then click Configure Group Type.
3. Click Configure Group Type Panels, then click Create.
4. In the topmost menu, select the object class that you want to add.
5. In the Panel Label field, enter the label that you want to display to end users when they view elements from this object class in the Group Manager.
6. Select the Panel Information Is Complete check box.
7. Click Save.
The object class is added. You can view this new object class by clicking the Tabs link in the left navigation pane for Group Manager Configuration.

How to Add New Object?

HI,
Any body can say how to add new object. For Example: The Document need to link with Invoice Transaction (T.Code: VF01, Table: VBRK/VBRP).
Points will be rewarded, if information is useful.
Tks
Mani.

Hi
You can create New objects using the T.code: SE80.
You can make an object link to SAP objects that are not shown in the possible entries list. To do this, proceed as follows:
1. In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140. The processing logic must follow that of screen 1204 in program SAPLVC130.
2. Create function module OBJECT_CHECK_XXXX (XXXX = object name) If the object can be classified, this function module already exists .
Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
Regards
S.Sivakumar
Reward points if useful----

How to add new field into dynamic internal table

Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30).    "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
   here i want to add one more field into <TAB> at LAST position and my
   Field name = field_stype     and
   Field type    = 'LVC_T_STYL'
could you please helpme out .

Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
               <fs_dyntable>,                     u201C Field symbol to create work area
               <fs_fldval> type any.              u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c.                     u201C Input number of columns
DATA:   t_newtable TYPE REF TO data,
        t_newline TYPE REF TO data,
        t_fldcat   TYPE slis_t_fldcat_alv,
        t_fldcat   TYPE lvc_t_fcat,
        wa_it_fldcat TYPE lvc_s_fcat,
        wa_colno(2) TYPE n,
        wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
    CLEAR wa_it_fldcat.
    move sy-index to wa_colno.
    concatenate 'COL'
                wa_colno
           into wa_flname.
    wa_it_fldcat-fieldname = wa_flname.
    wa_it_fldcat-datatype = 'CHAR'.
    wa_it_fldcat-intlen = 10.
    APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = t_fldcat
    IMPORTING
      ep_table        = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
    index = sy-index.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
Set up fieldvalue
    CONCATENATE 'VALUE' index INTO
                fieldvalue.
    CONDENSE    fieldvalue NO-GAPS.
    ASSIGN COMPONENT wa_flname
        OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
    <fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
    CLEAR wa_cat.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
    wa_cat-fieldname = wa_flname.
    wa_cat-seltext_s = wa_flname.
    wa_cat-outputlen = '10'.
    APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat = fs_fldcat
    TABLES
      t_outtab    = <t_dyntable>.

How to add new fields in Reduced message ( in BD53 )

Hi Experts,
How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
Thanks,
Ninad

Hello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S.

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

How to add new line in message on my S890

My stock keyboard in Lenovo S890 doesn't have enter key, is this normal ? How to add new line ?
However this happened only in messages, while using whatsapp the enter key present.

Hi,
the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
So, I don't see why you need to add a new line in transact move order.
You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
Thanks

How to add New field in SMART forms.

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new row and update existing rows at a time form the upload file

hi
How to add new row and update existing rows at a time form the upload file
example:ztable(existing table)
bcent                      smh            nsmh         valid date
0001112465      7.4                       26.06.2007
0001112466      7.5                       26.06.2007
000111801                      7.6                       26.06.2007
1982                      7.8                       26.06.2007
Flat file structure
bcent                       nsmh         valid date
0001112465     7.8     26.06.2007 ( update into above table in nsmh)
0001112466     7.9     26.06.2007 ( update into above table in nsmh)
000111801                     7.6      26.06.2007 ( update into above table in nsmh
1985                      11              26.06.2007   new row it should insert in table
thanks,
Sivagopal R

Hi,
First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
Then :
Loop at it.
*insert or modify as per your requirement.
Endloop.
Regards,
Srilatha.

How to add new system call in solaris ?

Similar Messages

Maybe you are looking for