How to add new tab after reason for rejection tab using tcode va01
Hello,
how to add new tab after reason for rejection tab using tcode va01.
Hi,
You can check this link...
Hope it will be helpful to you.
[https://forums.sdn.sap.com/click.jspa?searchID=23016273&messageID=6825861]
[http://www.sapdevelopment.co.uk/enhance/fexits.htm]
-Maharshi
Edited by: Maharshi Vyas on Mar 3, 2009 12:45 PM
Similar Messages
-
How add new tab after reason for rejection tab using tcode va01
Hello,
How to add new tab after Reason for Rejection tab using tranzaction code VA01.
pls suggest solution.I don't think you can add a tab after reason for rejection tab. There are custom tab, which you can use for your convenient, given by SAP. You can look into the below details:
Program : SAPMV45A
Screen: 8459(Item) and 8309(Header).
Kuntal. -
How add new tab after reason for rejection tab using tcode va01 using badi
I want to add new tab in va01 using badi. I search badi -> badi_sd_update_plval at the time of implementation it ask about access key.
which is suitable badi for va01 enhancement.
Any screen exit is available for this enhancement.You need to implement BADI through SE19. Refer below link for details
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf4940e11d295df0000e82de14a/frameset.htm
Hope this helps.. -
How to add new value in Classification under General tab via MM02.
Hello Experts,
I've a requirement where I need to add a new material variant configuration value via MM02 as highlighted below. I've also attached the screen shot of CL02, the two characteristics which I need to add (highlighted in red).
Can please anybody tell me the steps to add value in Classification under General tab via MM02.
Many thanks in advance.zero cool,
Use transaction CL02 , open class in PCL_222_PURO_BOX with class type 300
add characterstic
PCH_COSTING_WGT_DETERM
PCH_COSTING_WGT_A_DETERM
save it.
Now use MM02 and go to classification view , now you would be able to see these characterstic there.
Check and come back.
Thanks
Ritesh -
Hi how to add new folders under root for jsp in tomcat4.1.18
hi,
previsously i used tomcat3.3 and tomcat4.1.12 run sucessfully.
now i downloed jakartha_tomcat4.1.18,
i am running sample succesfuly direcly under root.
now i want my some jsp appilcationes to run under xyz,pqr folders
here my jsp files are abc.jsp,fgh.jsp while running file url like this
http://localhost:8080/xyz/abc.jsp
http://localhost:8080/pqr/fgh.jsp
while running url server not locate the files.
where i add these xyz and pqr folders in server.xml.
here my server.xml like this any one can modify this
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<!-- Comment these entries out to disable JMX MBeans support -->
<!-- You may also configure custom components (e.g. Valves/Realms) by
including your own mbean-descriptor file(s), and setting the
"descriptors" attribute to point to a ';' seperated list of paths
(in the ClassLoader sense) of files to add to the default list.
e.g. descriptors="/com/myfirm/mypackage/mbean-descriptor.xml"
-->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Tomcat-Standalone">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 4.0 documentation bundle for more detailed
instructions):
* Download and install JSSE 1.0.2 or later, and put the JAR files
into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8080 -->
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to -1 -->
<!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
<!--
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8443" minProcessors="5" maxProcessors="75"
enableLookups="true"
acceptCount="100" debug="0" scheme="https" secure="true"
useURIValidationHack="false" disableUploadTimeout="true">
<Factory className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
clientAuth="false" protocol="TLS" />
</Connector>
-->
<!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
<!-- Define an AJP 1.3 Connector on port 8009 -->
<!--
<Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
port="8009" minProcessors="5" maxProcessors="75"
acceptCount="10" debug="0"/>
-->
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8082" minProcessors="5" maxProcessors="75"
enableLookups="true"
acceptCount="100" debug="0" connectionTimeout="20000"
proxyPort="80" useURIValidationHack="false"
disableUploadTimeout="true" />
-->
<!-- Define a non-SSL legacy HTTP/1.1 Test Connector on port 8083 -->
<!--
<Connector className="org.apache.catalina.connector.http.HttpConnector"
port="8083" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" />
-->
<!-- Define a non-SSL HTTP/1.0 Test Connector on port 8084 -->
<!--
<Connector className="org.apache.catalina.connector.http10.HttpConnector"
port="8084" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via JK/JK2 ie :
<Engine name="Standalone" defaultHost="localhost" debug="0" jmvRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Standalone" defaultHost="localhost" debug="0">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.3
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Global logger unless overridden at lower levels -->
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
debug="0" resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host -->
<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn"
debug="0"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Logger shared by all Contexts related to this virtual host. By
default (when using FileLogger), log files are created in the "logs"
directory relative to $CATALINA_HOME. If you wish, you can specify
a different directory with the "directory" attribute. Specify either a
relative (to $CATALINA_HOME) or absolute path to the desired
directory.-->
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<!-- Define properties for each web application. This is only needed
if you want to set non-default properties, or have web application
document roots in places other than the virtual host's appBase
directory. -->
<!-- Tomcat Root Context -->
<Context path="" docBase="ROOT" debug="0"/>
<!-- Tomcat Examples Context -->
<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_examples_log." suffix=".txt"
timestamp="true"/>
<Ejb name="ejb/EmplRecord" type="Entity"
home="com.wombat.empl.EmployeeRecordHome"
remote="com.wombat.empl.EmployeeRecord"/>
<!-- If you wanted the examples app to be able to edit the
user database, you would uncomment the following entry.
Of course, you would want to enable security on the
application as well, so this is not done by default!
The database object could be accessed like this:
Context initCtx = new InitialContext();
Context envCtx = (Context) initCtx.lookup("java:comp/env");
UserDatabase database =
(UserDatabase) envCtx.lookup("userDatabase");
-->
<!--
<ResourceLink name="userDatabase" global="UserDatabase"
type="org.apache.catalina.UserDatabase"/>
-->
<!-- PersistentManager: Uncomment the section below to test Persistent
Sessions.
saveOnRestart: If true, all active sessions will be saved
to the Store when Catalina is shutdown, regardless of
other settings. All Sessions found in the Store will be
loaded on startup. Sessions past their expiration are
ignored in both cases.
maxActiveSessions: If 0 or greater, having too many active
sessions will result in some being swapped out. minIdleSwap
limits this. -1 or 0 means unlimited sessions are allowed.
If it is not possible to swap sessions new sessions will
be rejected.
This avoids thrashing when the site is highly active.
minIdleSwap: Sessions must be idle for at least this long
(in seconds) before they will be swapped out due to
activity.
0 means sessions will almost always be swapped out after
use - this will be noticeably slow for your users.
maxIdleSwap: Sessions will be swapped out if idle for this
long (in seconds). If minIdleSwap is higher, then it will
override this. This isn't exact: it is checked periodically.
-1 means sessions won't be swapped out for this reason,
although they may be swapped out for maxActiveSessions.
If set to >= 0, guarantees that all sessions found in the
Store will be loaded on startup.
maxIdleBackup: Sessions will be backed up (saved to the Store,
but left in active memory) if idle for this long (in seconds),
and all sessions found in the Store will be loaded on startup.
If set to -1 sessions will not be backed up, 0 means they
should be backed up shortly after being used.
To clear sessions from the Store, set maxActiveSessions, maxIdleSwap,
and minIdleBackup all to -1, saveOnRestart to false, then restart
Catalina.
-->
<!--
<Manager className="org.apache.catalina.session.PersistentManager"
debug="0"
saveOnRestart="true"
maxActiveSessions="-1"
minIdleSwap="-1"
maxIdleSwap="-1"
maxIdleBackup="-1">
<Store className="org.apache.catalina.session.FileStore"/>
</Manager>
-->
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/EmployeeAppDb">
<parameter><name>username</name><value>sa</value></parameter>
<parameter><name>password</name><value></value></parameter>
<parameter><name>driverClassName</name>
<value>org.hsql.jdbcDriver</value></parameter>
<parameter><name>url</name>
<value>jdbc:HypersonicSQL:database</value></parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Context>
</Host>
</Engine>
</Service>
<!-- The MOD_WEBAPP connector is used to connect Apache 1.3 with Tomcat 4.0
as its servlet container. Please read the README.txt file coming with
the WebApp Module distribution on how to build it.
(Or check out the "jakarta-tomcat-connectors/webapp" CVS repository)
To configure the Apache side, you must ensure that you have the
"ServerName" and "Port" directives defined in "httpd.conf". Then,
lines like these to the bottom of your "httpd.conf" file:
LoadModule webapp_module libexec/mod_webapp.so
WebAppConnection warpConnection warp localhost:8008
WebAppDeploy examples warpConnection /examples/
The next time you restart Apache (after restarting Tomcat, if needed)
the connection will be established, and all applications you make
visible via "WebAppDeploy" directives can be accessed through Apache.
-->
<!-- Define an Apache-Connector Service -->
<!--
<Service name="Tomcat-Apache">
<Connector className="org.apache.catalina.connector.warp.WarpConnector"
port="8008" minProcessors="5" maxProcessors="75"
enableLookups="true" appBase="webapps"
acceptCount="10" debug="0"/>
<Engine className="org.apache.catalina.connector.warp.WarpEngine"
name="Apache" debug="0">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="apache_log." suffix=".txt"
timestamp="true"/>
<Realm className="org.apache.catalina.realm.MemoryRealm" />
</Engine>
</Service>
-->
</Server>
==========
any one may modify above one
thanks
pullareddyjAs the server.xml is big enough, I took the minimum portion of it. Hope u can proceed with it.
<!-- Tomcat Root Context -->
<Context path="" docBase="ROOT" debug="0"/>
<!-- New contexts -->
<Context path="/xyz" docBase="pathTo_xyz" debug="0" crossContext="true"/>
<Context path="/pqr" docBase="pathTo_pqr" debug="0" crossContext="true"/>
<!-- Tomcat Examples Context -->
<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
You should also provide a WEB-INF folder under pqr or xyz folder.
You should also provide a web.xml file under each WEB-INF folder.
The minimal web.xml is
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/j2ee/dtd/web-app_2_3.dtd">
<web-app>
</web-app>
That's it. Try it out. Hope it is OK.
Hafizur Rahman
SCJP -
How to add new tables in Streams for Schema level replication ( 10.2.0.3 )
Hi,
I am in process of setting up Oracle Streams schema level replication on version 10.2.0.3. I am able to setup replication for one table properly. Now I want to add 10 more new tables for schema level replication. Few questions regarding this
1. If I create new tables in source, shall I have to create tables in target database manually or I have to do export STREAMS_INSTANTIATION=Y
2. Can you tell me metalink note id to read more on this topic ?
thanks & regards
paragThe same capture and apply process can be used to replicate other tables. Following steps should suffice your need:
Say table NEW is the new table to be added with owner SANTU
downstr_cap is the capture process which is already running
downstr_apply is the apply process which is already there
1. Now stop the apply process
2. Stop the capture process
3. Add the new table in the capture process using +ve rule
BEGIN
DBMS_STREAMS_ADM.ADD_TABLE_RULES
table_name => 'SANTU.NEW',
streams_type => 'capture',
streams_name => 'downstr_cap',
queue_name => 'strmadmin.DOWNSTREAM_Q',
include_dml => true,
include_ddl => true,
source_database => ' Name of the source database ',
inclusion_rule => true
END;
4. Take export of the new table with "OBJECT_CONSISTENT=Y" option
5. Import the table at destination with "STREAMS_INSTANTIATION=Y' option
6. Start the apply process
7. Start the capture process -
How to add new room in LCCS for live streaming video using flex builder
Hi,
I have created a video conferencing functionality using LCCS. Now i want to create a room programatically.
So that user can create his own room and invite his/her friends.I am looking for solution on this.
Any guidance on thisQuick suggestion : the documentation has a whole section on this =) :
http://learn.adobe.com/wiki/display/lccs/06DeployingApplications
nigel -
How to add new line item based on main item using crm_order_maintain
Hi All,
can you please provide a way to create a new line item based on main line item and save in crm transaction( in house repair order) by using crm_order_maintain(from SAP GUI).
Thanks,
vinod.Hi Vinod,
The relationship with main item is stored with CRMD_ORDERADM_I- Parent.
You need to pass the guid of main item to orderadm_i-parent. This will keep the relationship with main item.
Thanks
Ajay -
How to add new fields in sap copied standard form using itcsy structure
hi guys,
i want add some fields in sap script copied standard form using itcsy structure.
let me know the procedure with any example.
thanks,
anitha.Hii anitha
plz c code below
Syntax goes like this
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
Example:
In script form
/: PERFORM READ_TEXTS IN PROGRAM 'Z08M1_FORM_EKFORM1'
/: USING &EKKO-EKORG&
/: USING &EKPO-WERKS&
/: USING &EKKO-EKGRP&
/: USING &EKKO-BSTYP&
/: CHANGING &COMPNAME&
/: CHANGING &SENDADR&
/: CHANGING &INVCADR&
/: CHANGING &COMPADR&
/: CHANGING &COVERLTR&
/: CHANGING &SHIPADR&
/: CHANGING &REMINDER&
/: CHANGING &REJECTION&
/: CHANGING &POSTADR&
/: CHANGING &LOGO&
/: ENDPERFORM
In program
FORM Read_texts - To extract the standard texts from the table *
FORM READ_TEXTS TABLES IN_PAR STRUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA : L_EKORG TYPE EKORG,
L_WERKS TYPE WERKS_D,
L_BSTYP TYPE BSTYP,
L_EKGRP TYPE BKGRP.
READ TABLE IN_PAR WITH KEY 'EKKO-EKORG' .
CHECK SY-SUBRC = 0.
L_EKORG = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY 'EKPO-WERKS' .
CHECK SY-SUBRC = 0.
L_WERKS = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY 'EKKO-EKGRP' .
CHECK SY-SUBRC = 0.
L_EKGRP = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY 'EKKO-BSTYP' .
CHECK SY-SUBRC = 0.
L_BSTYP = IN_PAR-VALUE.
CLEAR Z08M1_ORG_TEXTS.
SELECT SINGLE * FROM Z08M1_ORG_TEXTS WHERE EKORG = L_EKORG
AND WERKS = L_WERKS
AND EKGRP = L_EKGRP
AND BSTYP = L_BSTYP.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM Z08M1_ORG_TEXTS WHERE EKORG = L_EKORG
AND WERKS = L_WERKS
AND EKGRP = L_EKGRP
AND BSTYP = SPACE.
ENDIF.
READ TABLE OUT_PAR WITH KEY 'COMPNAME'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_COMP.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'SENDADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_ADRS.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'INVCADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_INVC.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'COMPADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_CPAD.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'COVERLTR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_COVR.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'SHIPADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_SHIP.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'REMINDER'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_RMDR.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'REJECTION'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_RJCT.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'POSTADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_POST.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'LOGO'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_LOGO.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
reward points if useful
regards
Jaipal -
How to add new group entry in Cisco Vpn using powershell
I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
$username = 'TestUser'
$userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
$credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
$username,$userPassword
$password = $credentials.GetNetworkCredential().Password
Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
.\vpnclient.exe connect $vpn_profile user $username pwd $password
Write-Host "You Are Connected"
cd "C:\"Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
Update: Added more info; clarified -
How to add new xml item(BAPI requset)?
Hello
i want to create bom to ERP from mii
how to add new xml item(BAPI requset)?
i use bapi CAD_CREATE_BOM_WITH_SUB_ITEMS
this bapi's format is
<table>
<item>
<col1>1111</col1>
<col2>bbbb</col2>
</item>
</table>
i want to add <item>
like this
<table>
<item>
<col1>1111</col1>
<col2>bbbb</col2>
</item>
<item>
<col1>22222</col1>
<col2>bbbb</col2>
</item>
</table>
how to set trx?
i tryed
SAP_JCo_Interface_0.Request{/CAD_CREATE_BOM_WITH_SUB_ITEMS/TABLES/BOM_ITEM/item[2]/SORTF}
when error occured
use MII12.0
Edited by: Atsushi Iwasaki on May 18, 2010 6:22 AMHi,
You can try this alternative
Step 1) Create XML Document with required structure which you want to pass it to BAPI request.
Step 2) Populate the XML Row with required contents and map it to above created XML document
Step 3) Map above created XML Document to BAPI request (use assign XML option dfrom link editor rather tha assign value)
This will help to map dynamic contents to your BAPI request.
Regards,
Shalaka -
User Exists In Sales Order Creation Program for adding "Reason For Reject"
Hi gurus
I have following requriement
As New Sales Order created (VA01) by default or at the time of saving the sale order, perticular "Reason for Rejection" should be set to each line item.
This is then can be removed in change (VA02) with Mass change.
We need this to review the sales order / block sales order from MRP run.
Please let me know how to manage this or is there any user exist for the same.
Thanks
Sunil KHi,
As per my knowledge the automatic creation of rejection order is not possible, still will check out and know.
but for urgent use you will have to follow the manual way of changing the line items from OK to blocked for apporoval so you can achieve their not passing on to MRP.
manual way is what is described below:
You can either reject the whole sales document or individual items.
Reject all items:
If you want to reject all the items, choose Reject document in the change modus for the sales document.
The system automatically selects all the items and you can enter a reason for rejection in the following dialog box.
Enter the appropriate reason for rejection and choose Copy.
The system assigns the same reason for rejection to all the selected items.
Reject individual items:
If you only want to reject some of the items, select those items in the item overview screen and choose Edit - Fast change of... - Reason for rejection.
A dialog box appears in which you can enter the appropriate reason for rejection.
Enter the appropriate reason for rejection and choose Copy.
The system assigns the same reason for rejection to all the selected items.
Reject individual items with different reasons of rejection:
If you want to enter different reasons for rejection for the items, choose the Reason for rejection tab page from the overview screen when changing the sales document.
You can enter a different reason for rejection for each item in the Reason for rejection field.
regards,
Siddharth.
Edited by: SD on Mar 15, 2008 10:22 AM -
Reason for rejection at line itme question - ?
Hi
how the line item will pick reason for rejection automatically in the order -?
Normally reason for rejection will enter manually for line items -?
In my scenario when i create a order I am seeing reason for rejection at line item. what could be the reason? where I can check -?
Please help me.
Thanks
GregHi Vas
You said with the help of BDC -?
what could be the bussiness reason -?
can you help me to understnad the scenario with the example -?
Please.
Thanks
Greg -
Reason for Rejection getting Auto Populated
Hi,
I am creating an std order without reference to a preceding document, still the "reason for rejection" is auto populating in the Reason for rejection Tab.
I dont want this to happen, please suggest.
SachinHi,
Suppose an order has been created of 100MTS and been Dispatched & Billed only 90 MTS.Now rest of 10 MTS ,you dont want to dispatch.Then in that case , Marketing person will mention the Reason of Rejection like Order Shortclosed.Now if you will see the Status of order in Document Flow , it will be closed.
So if it is MTO Scenario, then just De-Assign the Stock from the Sales Order and assign it to the newly created one.
Best Regards,
Ankur -
Reason for rejection in Quotation
Hi SAP-Guys,
I'm creating a quotation and i won't set any reason for rejection for that,but while saving it reason for rejection is populating automatically, i was unable to find out the reason .
please help me on what basis it is fetching , any steps to follow.
Regards
KrishnaRe: Reason for rejection in Quotation
Hi,
I am creating an std order without reference to a preceding document, still the "reason for rejection" is auto populating in the Reason for rejection Tab.
I dont want this to happen, please suggest.
Sachin
Maybe you are looking for
-
What is the best way to get rid of duplicates in the XML data?
Hi all, Please help me with the best way to get rid of the duplicates in the XML data. Will a transform with some stylesheet do the trick? I need to read on the stylesheet first, but please tell me if that is possible. I have to deal with XML data th
-
Navigator Console video display bug
Hi! I've tested video streams with WebCamera example from SDK and tried Video display from console. And looks like there are bug, in app this video looks as expected, but in console it was cropped Here are screenshot. I've used latest Navigator, down
-
Hi, I can not resolve my problem. On our Public site we create a course page for my unit «BENA». This welcome page name is «Sciences et technologies». My problem, we have a welcome page for «Sciences de l'éducation» and we would like to put a shortcu
-
Hello In our R11 we can open a form as many as needed.. We're just upgrading our R11 into R12 Oracle Financials and I noticed that it won't allow to open more than 1 form. How can I set or allow the Ofin to open more than 1 form? thanks janna
-
I can receive emails, but when i try to open the email it tells my thunderbird is not responding
I can send emails. I cannot get into any local folders. I have gone into my server and had a tech support person check and all is correct there. If it does finally open one I cannot delete it as it will not respond. I have scanned with malwarebyte an