How to add new users to BPM 11g

In BPM 10g, I can add new users and roles in administrator console. How to login to BPM 11g administrator console and add new users?

While creating Human Task did you selected "Initiator" in the Pattern?
Login as administartor(weblogic) go to Administration the you will find all the processes and corresponding roles. There you can add/modify the users to the processes.
Let me know if you have any questions.
Thanks
MC

Similar Messages

How to add new user status in Solman

Hello,
I wanted to add a new user status in Solman.i have added one new user status " reopen" . but when i checed it is showing as "no status".
I have also checked the table TJ30T, in this table we have 2 entry for all other user status one is in english and one is in german.
Please let me know how to add entry in this table or is there any other ways to add new user status in solman.
Regards,
Bhavesh

Hi Abhyankar,
Explain the scenario where you want to create a new user status?
General remark:
Creation of new user status can be for 2 cases: Whether you want the status to show up in the status field or you want to only use the status to search corrections and the status is displayed in "Further Statuses" tab.
If you want to use the new user status for searching the corrections and this user status will be manually set, then you need to create the status in CRMBS02 transaction without specifying any status numbers.
Then the new status will be available in "Further statuses" tab and you need to manually set or unset the status.
If you need your user status to reflect in the status field then you've perform the following actions in SPRO:
1. Create Authorization key for the new status
2. Create the new status with status number and order of visibility; assign the authorization key to the status
3. Create the action which will set the status
4. Add the action in the action profile
5. Write the schedule condition required
These steps are on a high level. Hope this helps you to decide.
Regards,
Sameer

CHARM how to add new user status to change document

Can someone please suggest how to add a new user status to a change document ?
I am looking into adding status "Pending" to Admin correction SDAD.
Thank you in advance
Elena

Hello,
Asides from the obvious adding of a new status to status profile SDADHEAD, you may want to have a look at the SPRO activities:
SAP Solution Manager
-> Scenario-Specific Settings
-> Change Request Management
   -> Extended Configuration
    -> Change Request Management
     -> Change Transaction
      -> Change Transaction Types
        o Define Status Attributes
Also activity "Make Settings for Change Transaction Types" in the same path is important.
Best regards,
Miguel Ariñ

How to add iphone user agent in safari browser running on windows xp

How to add new user agent (iphone user agent) to safari browser(version 3) which is running on windows xp os .
thanks in advance

UPDATE: We were able to further identify the root cause of the problem to be when anonymous access is turned off and the subweb is set up to use basic and integrated authentication (IIS settings). To test this, we removed integrated authentication (leaving only basic authentication in place) and the problem was fixed. However, this is not a viable solution as we need to use integrated authentication (for various other reasons).

How to see new user in RPD (Admin tool) 11g

Hi all,
I am trying to create new user in OBIEE 11g. I did everthing from this blog http://varanasisaichand.blogspot.com/2011/03/obiee-11g-security-creating-users-and.html
Why I am not able to se new user in Identitiy in Admin tool? What am I missing.
Thanks
P.S. I found in documentation that "The screenshot below shows the Identity Manager dialog, which enables you to manage users and Application roles." http://docs.oracle.com/cd/E25054_01/bi.1111/e10543/intro.htm (1.6.3 Oracle BI Administration Tool)

Hi,
yeah when i put * in the set online filter i am able to see the users which i have created in weblogic. After all the users appear then i select Action-> close. Now again when i try to cross check it once again i again clicked on manage->indentity->now i dont see the users. what could be the issue?
Thanks,
RM

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

How to add new fields in asset master data

Hello,
i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
Thanks.
Pedro

Hi Pedro,
SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
You can configure them @ the following 3 nodes in IMG:
Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
Regards,
Vishal Thakur

How to add a user defined HTTP header field?

Hi, everyone!
I want to add a user defined HTTP header field to a HTTP
response header.
I use the following statements in testHeader.jsp
response.addHeader("myheader", "123");
response.sendRedirect("middleHeader.jsp");
in middleHeader.jsp,
out.print(request.getHeader("myheader"));
But the output in middleHeader.jsp is null!
How to add a user defined HTTP header field to a HTTP
response header? Are there some sample codes?
Cheers,
George

the send redirect actually creates a new request (through the client) and thus a new response
thus the headers you set in the response are gone for the next request/response
You can try servletDispatcher.forward

Can't Kerberize or add new users

I keep experiencing the same strange behavior: after a variable amount of time (from hours to days) Open Directory in Server Admin will show that Kerberos is not running. When I click the Kerberize button, neither the server admin account nor the domain admin account will work. I just keep getting prompted for a password in a loop.
Restarting may or may not show the Kerberos service running.
In either case, I then cannot add new users to the domain. The New User button in Workgroup Manager is disabled.
I'm really new to Mac Server (I don't even know enough to be dangerous); so, I'm not sure how to troubleshoot this issue. I'd like to transition users to portable home directories, but the solutions I've read to Kerberos problems is to demote the server and the promote. But that wipes the users, so, I don't really want to go that route.
Any help is appreciated.
Jeff

Hi
If you can authenticate to the OD node – and it only needs to be once – you can select all your users (not Directory Administrator UID 100) and export them. WGM > Server Menu > Export. How many are there? This will allow you to reimport them later on into any directory node you like, local NetInfo or OD. Passwords do not carry over but this is no big deal as you can assign a password policy later on. When first populating the OD node with users and groups its a good idea to export and save them all to a memory stick or something suitable. It may not help you in this situation but its a good tip for later on.
As Leif says if Kerberos is stopping or starting and generally being flaky its usually (but not always) down to a problem with DNS somewhere.
There are other possibilities. Perhaps the Server has been joined to an Active Directory KDC? If thats so the users you may be seeing are already on the AD Server and there is nothing to lose. It could also explain why authentication is a struggle. Your post also seems to be indicating a time sync issue, (along with DNS another common problem). Inspect the edu.mit.Kerberos file located in /Library/Preferences on the clients to see which KDC is issuing tickets. It may not be the OD Master. If you find that the server is supplementing AD and not providing SSO then its should be safe to demote. Ultimately this is really the only effective solution. Demote to Standalone and sort out the DNS problems (if any) and repromote.
There is another possible solution which you could try if you feel brave enough.
When the server get promoted to OD Master slapd creates the slapd_macosxserver.conf file in /etc/openldap. This file will contain an entry for the root LDAP user – rootdn. Just as System Administrator (UID 501) admin has root sitting behind it so does Directory Administrator (UID 1000) diradmin. This root user has total control over all the data inside the LDAP database, standard access controls do not apply to this user. The important bit about rootdn is that ANY USER and PASSWORD can be used. The user and password does not even have to exist in the LDAP database itself, it only needs to exist in slapd_macosxserver.conf. The default system admin account or root can edit this file to add a new user and password (it can be MD5 or plaintext), slapd will then assume that any user which can authenticate to the newly created name and password is the root user for the LDAP database and will give full access to user records and the OD node itself. Create a new user in the local NetInfo node first, try not to use diradmin and UID1000.
Hope this helps – Tony

How to add new group entry in Cisco Vpn using powershell

I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
$username = 'TestUser'
$userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
$credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
$username,$userPassword
$password = $credentials.GetNetworkCredential().Password
Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
.\vpnclient.exe connect $vpn_profile user $username pwd $password
Write-Host "You Are Connected"
cd "C:\"

Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
Update: Added more info; clarified

Can't add new users in Server Admin console in Server 10.1.4.

I've run into an issue with an older OS X Server 10.1.4 running on a G4 platform. It functions as a shared file repository and I need to add new users. However, it would appear that I've developed a problem.
When trying to add new users I get the following error:
An error occurred in the Users & Groups module in entry point "RACMMenuItemSelected".
A program error has occurred.
1004
Now, my best guess is it's a corruption somewhere. But, I don't want to go poking around the production server taking it down and up until I've got some idea where I'm going. Any suggestions on where my troubles might be? Or has anyone had this issue before, and how was it corrected? (Hopefully not by a full software reload.)
I'd like to replace/upgrade this server, but until there's money in the budget, that's just a dream, I need to try to figure out how to fix what's here.
Help, please?
PowerBook G4 17 Mac OS X (10.3.9) 1.5G RAM

No answer was found for this issue. I've finally removed the server from production and will likely reformat and reinstall for use in other production areas. Hopefully we'll be upgrading the OS at the same time.

How to add new group attribute in OAM?

Hi,
I'm using SunONE DS 5.2 P4 as my Oracle Access Manager repository. I would like to add some new attributes to Users and also to Groups.
I am able to add the new attributes to users by adding the attributes to the oblixorgperson object class in SunONE DS, and then the new attributes appear in the OAM web admin (under the inetorgperson object class).
I have tried to do similar thing to add attributes to Groups. I have added the new attributes to the oblixgroup object class in SunONE DS, but the new attributes do not appear in the OAM web admin anywhere (e.g., under the groupofuniquenames, etc. object class).
Can anyone tell me how to add new attributes to SunONE DS so that they are available under Groups in OAM?
Thanks,
Jim Lum

Have you added the auxiliary class "oblixgroup" to the Group Manager?
1. Ensure that you have configured the object class or classes that you want to add in the Common Configuration tab.
2. From the Identity System Console, select Group Manager Configuration, then click Configure Group Type.
3. Click Configure Group Type Panels, then click Create.
4. In the topmost menu, select the object class that you want to add.
5. In the Panel Label field, enter the label that you want to display to end users when they view elements from this object class in the Group Manager.
6. Select the Panel Information Is Complete check box.
7. Click Save.
The object class is added. You can view this new object class by clicking the Tabs link in the left navigation pane for Group Manager Configuration.

Add new user in BPC

When I add new user , I am not able to select my preffered server. Instead its using some old server. HOw to rectify.
Please assist.

Hi,
What kind of authentication are you using? CMS or Active directory?
Check for the servers and domains entered in the Server Manager.
Check if they are, as you want it to be.
Karthik AJ

[svn] 3867: Add new user-agent info to the sample services-config.xml file.

Revision: 3867
Author: [email protected]
Date: 2008-10-24 07:13:10 -0700 (Fri, 24 Oct 2008)
Log Message:
Add new user-agent info to the sample services-config.xml file.
Modified Paths:
blazeds/trunk/resources/config/services-config.xml

Resolved! The problem was in the php code the wizard had generated as an example and that I had edited in Dreamweaver. I had tried to start a session and set session objects in the php code. I developed if() { statements} to check the session variable before executing the function in some of my data services. Apparently the wizard does not like this. I removed all references to session. I reconfigured the input types and the return types for each service. With the code now clean the wizard created the example code and placed the proper package in the scr.services package. I still have custom php code and it executes.
Things I learned:
If the php code stops when a session variable is not available in the if statement and the data service is refreshed, the wizard will not "look" beyond the if statement.
Functions downstream of a session variable misshap will show in the data services window but the functions will have a circle icon to the left of the function name and each variable to be passed to the php code will be declared as type = Object in Flashbuilder. The input types and return types will have to be reconfigured for each non-functioning function. Simply commenting out a portion of the php code and attempting a refresh will not make it work again.
When the wizard is unable to refresh properly because of a stop in the php code it stops working completely so additional refreshes or creation of code is not carried out.
I decided to create a My SQL table for user and other identifiers rather than attempting the session object again.
Sorry, I did not make screen shots as I solved this problem. I hope the solution is not hard to visualize.
Thanks for looking and considering how to help me. I hope my solution works for you.

How to add new users to BPM 11g

Similar Messages

Maybe you are looking for