How to add price to any material??

I recieved some material from a Non-SAP site by code MB1C(movement type 961). In stock it shows the quantity but not the value how can I add value to that material??

Dear Ujjawal ,
Chek the material type of the material frist
whether it maintain as quantiy on you plant, or value basis or both
as you have quantity updated that simply means Value updation is not possible for that material type. chek in IMG settings
Guys
Tr. code: MR21 is t .code for price change, and for those material if no accounting data is maintain how can you change the price. Please think twice b4 you give sol
Let me correct if I am Wrong

Similar Messages

How To Add Prices For A material?

HI,
Plz Tell Me How Can I add Prices Of A Material nd also where can i check it?
nd also how can i confirm tht which price is correct i.e if it is picking different prices for the same material

Hi,
When you create a purchase order, the price is taken from different sources. You can change the sources.
System adopt the pirces to purchase order based on how you are creating Po.If you are creating Po without any reference documents then system always copies the last purchase order price from inforecord .
If you set EVO parameter with 'not adopt' last Po price then system asks for price in ME21N.
If you are creating Po with reference document like contract ,PR then system copies the price from reference documents.
I do not know if this answers your question.
Best Regards,
Arminda Jack

In Sales Order Users are not allowed to change price for any material

Dear all,
Please give me the solution :
In Sales Order va02 Users are not allowed to change price for any material .

Hi Amit
If you want that in VA01 manual as well as other pricing condiion entry and cahnges to be allowed and only in va02 users should be restricted ,then you have following alternative.
Go to T.Code SHD0
Select Transaction VA02.
Create a new variant ,give suitable name.
select option change with processing.
So u can run a va02 transaction and for every screen u can create screen variant and control data entry whether required , dispaly or hide.
in this for LV69a pricing screen disable update button .
so system wont change anything updated or cahnged in pricing.
further you can create the variant transactions from this transaction variant and assign to different users as per control requirements.
I think this will help you
Regards
mandar

How to add new columns in materialized view

We are using Oracle 10g Release2.
We need to add new columns to a prebuilt fast refresh materialized view. We want to add 4 new columns in this table and make them part of select statement in the materialized view. We can drop the view but we cannot do complete refresh after that because the paymentsInfo table has a creation_timestamp column which is populated by before row insert trigger with systimestamp. If we did the complete refresh, all values in this column shall be changed.
CREATE MATERIALIZED VIEW paymentsInfo
ON PREBUILT TABLE
REFRESH FAST
ON DEMAND
START WITH SYSDATE
NEXT SYSDATE+5/1440
WITH PRIMARY KEY
DISABLE QUERY REWRITE AS
SELECT PAYMENT_ID,BATCH_REFERENCE, TRANSACTION_REFERENCE, NO_OF_TRANSACTIONS, DEBIT_ACC_NUM,... from payment@dblink
I want to know is there any other way to add new columns without losing any changes from the master table.
Thanks.

There is no way to add new Columns to Materialized view. To add new columns, it has to be dropped and re-built again.
Extract from Oracle Documentaion:
Use the ALTER MATERIALIZED VIEW statement to modify an existing materialized view in one or more of the following ways:
To change its storage characteristics
To change its refresh method, mode, or time
To alter its structure so that it is a different type of materialized view
To enable or disable query rewrite
If you have a problem of Complete refresh, then It may be beneficial to get the backup of the MView; Drop and re-create it with modified definition; Restore the backup data leaving the new columns untouched (assuming they are to be kept as fetched from the Master site).

How to activate price tab in material component

Dear All,
Actually i need to assign price for my issuing material, but i am not able get the price tab in material component its only showing general data here i able to assign the quantity. I need help for how to activate the price tab.
Regards,
S.Suresh.

Hi,
if you take non stock material component ( item category as "N") then system allows you to change the price.
for this click on material component then, click on Purch.data tab...here you can chnage the price.
But this is not happening with stock material ( item category as "L").According to me this will not happen with stock material.
sandeep

How to add leading 0 for material contain alphanumeric

The requirement: display material with 10 digits.
At first I used, l_matnr+8(10), but there is a problem if the material less than 8 digits.
I tried this function:CONVERSION_EXIT_MATN1_INPUT to add leading 0,but it works for material contain number only.
I have material like 43R1784, how can I ensure it display as 00043R1784.
Thanks!

Hi,
The following sample is for your reference:
data: lv_matnr(10) type c value '43R1784',
lv_length type i,
n type i.
lv_length = strlen( lv_matnr ).
n = 10 - lv_length.
do n times.
concatenate '0' lv_matnr into lv_matnr.
enddo.
write: lv_matnr.
Regards,
Chris Gu

How to add the expenses to material cost

Hi
i want to add the packing expenses to material cost
Which account key i had to assign to the the packing condition type so that the packing cost is added to material cost
Krishna

hi
is there any accrual tick in ur packing condition if yes remove it and do not use any acct key for it
i havent try it , try it and reply back
or try coping new condition from std condition for surcharge and use it so ur cost will get load on ur mat cost
regards
kunal

How to add attribute Pricing ref material (PMATN) to 0MAT_SALES in BW

Hi there
I need to create reports with the use of pricing ref. material (PMATN) showing the material numbers where PMATN has been used.It will have to be an attribute to infoobject 0MAT_SALES. It is not available in BW, but in table MVKE in R3. How do I do a handover to BW? And can anyone give an idea of what infoprovider should be used so I can load data and create reports with the best performance?
Cheers,
Marit

BAPI_SALESORDER_CREATEFROMDAT1
"(obsolete from 4.6 version)
BAPI_SALESORDER_CREATEFROMDAT2
please see the version and change the BAPI
reward points if it is usefull ....
Girish

How to add day in "Horizontal Material Plan"

Hi All
I have already reviewed my MRP plan through Horizontal material plan. in that form i choose Display bucket type is "Days".
But only 36 days that appear in Harisontal material plan.
My requirement is : i want in horizontal material plan can appears at least 90 days.
It's Possible?
if Possible, how to setup it?
Regards,
The Pooh

Hi Abhishek Sharma
Thanks for reply
I have already check in plan options that there is not available for Plan start date and end date.
What you mean is one of the features in ASCP? Because im not use ASCP. i'm used SCP.
Thanks,
The Pooh

I deleted my phone off from findiPhone app now I don't know how too add it back any ideas guys

This what happen I was looking where my iPhone was or spying but I accidentally deleted or remove my device so how can I add my phone back to the app findiphone

If you deleted it from the Find My iPhone device list, it should automatically reappear when it goes back online. If it doesn't, try turning Find My iPhone off, then back on.

How to add an icon to a node in network graphics?

Hi all,
Do you know how to add an icon (any SAP' icon) to a node in network graphics?
Just like a tree can have a leaf with icon (for example, a person icon, a plant icon), can a node in network graphics have an icon also? and how to implement in network graphics?
I already studied t-code gral: NETZOCX1
NETZOCX2
NETZ_BO1
NETZ_BO2
NETZ_BO3
But no actual output.
It seems using node type in network graphics can help to determine different icons, could you give some suggestion or examples?
Thanks a lot!!

Hi,
Thanks for you link about SAP Graphics Framework. It seems not very useful in our case.
Since we are using Control Framework now, there is Tree and Networks in it. Can a node in a network have an icon (such as person icon, plant icon)? I know a leaf in a tree in Control Framework can have an icon.
Anybody has comments or suggestion?
Thanks!

How to add one more field in Internal table

Hi Experts
i have declared an internal table
DATA: lt_viqmel_iflos TYPE TABLE OF viqmel_iflos.
viqmel_iflos is a Standared SAP Table,
Now i want to add one more Text field in the internal table only, how to add in program. any one plz help.
<REMOVED BY MODERATOR>
Mohana
Edited by: Alvaro Tejada Galindo on Feb 7, 2008 10:09 AM

you can put this:
types: begin of t_table_viqmel_iflos,
include structure of viqmel_iflos,
new_field type xxxx.
types: end of viqmel_iflos.
DATA: lt_viqmel_iflos TYPE TABLE OF t_table_viqmel_iflos.
Luck.

How to add the push button on the apllication tollbar of IL02 tcode

Hi Friends,
I have to add the push button on the application tool bar of the IL02.when that push button is pressed then some operation to be performed.Could you please suggest how to add.Is there any screen exit if yes what is that.
With out screen exits if there is any way ?
Thanks and regards,
shyla

HI Vicky ,
                  if u want an interactive ALV report , there are lot of forums already having the solution for that , but let me give u the solution anyway.
In the function module "REUSE_ALV_GRID_DISPLAY" , import parameters
     I_CALLBACK_PF_STATUS_SET          = 'FLIGHT'
     I_CALLBACK_USER_COMMAND           = 'BUTTON_CLICK'
has to be supplied to this function module . The PF status is where u hav created the two buttons , that PF status has to be given here .If the user clicks on the button then it is handled by the form routines . Inside the sub-routine based on the button the user has selected u could perform the action.
FORM FLIGHT    USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'FLIGHT' EXCLUDING RT_EXTAB.
ENDFORM.
Here the "Flight" is the PF_status .
FORM BUTTON_CLICK USING UCOMM type SY-UCOMM
                       SELFIELD type SLIS_SELFIELD.
CASE UCOMM.
    WHEN 'BUTTON!' .
write ur code for button 1.
WHEN "BUTTON"
*Write ur code for button2 .
end case.
endform.
for any queries reply back.
regards

How to add audio to image sequence?

I've imported a Photoshop image sequence into FCP X 10.1.1. Dropped it on the timeline, created a compound clip. So far I can't figure out how to add audio of any kind. I've tried starting over, making sure properties had audio setting enabled. No change though. No matter what I try, no audio tab in the inspector. What am I missing?
Thanks,
Michael

Are you importing an audio file that is seperate? Otherwise it is attached to your video. in the timeline, choose expand audio & video. You can import almost any format. Import it into the same event that you are in - a song from your desktop or from your folder where you copied all your contents from your camera card or music from ITunes (in which case you use the audio tab on the far right of the timeline UNDER THE INSPECTOR).
How did you import your media?:
Help?

How to add discussions to Collaboration Room using Rooms API

Hi All,
How to add discussions to any room using the Rooms API?
I looked at the NW04s javadocs, but could not find which would help?
Any pointers will be appreciated.
Regards,Sandip

Hi All,
Any help!
Any help from SAP? Are the discussion APIs available?
Any input is appreciated. Thanks
Regards
Sandip
Message was edited by:
Sandip Agarwal

How to add price to any material??

Similar Messages

Maybe you are looking for