How to add request in the buffer
Hii All,
How to add request in the buffer in bulk.
i am using following command.
tp addtobuffer requestno <sid>
but after doing it is giving me the following error
C:\usr\sap\trans\bin>tp addtobuffer BWDK900161 BT1
^CThis is tp version 340.07 (release 640, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
Pls help.
Regards,
Viren.
Hi Rolf,
thax for your reply.
But still it is not working it shows following message.
C:\usr\sap\trans\bin>tp addtobuffer BWDK900051 BT1 pf=c\usr\sap\trans\bin\TP_DOM
AIN_BT1.PFL
This is tp version 340.07 (release 640, unicode enabled)
E-c\usr\sap\trans\bin\TP_DOMAIN_BT1.PFL could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in c\usr\sap\trans\bin\TP_DOMAIN_BT1.PFL: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
Regards,
Viren.
Similar Messages
-
How do I know when the buffer flushed all the data out?
I am using a very high sampling rate (500000 Hz) and acquire 1024 data points continuously. It takes 370000 data points in 10 second. I use a counter to help with the retrigger PFI line. I have a huge buffer so that I can make sure that the buffer is not overflowed. The code is attached below. My problem is that the data acquisition is done so fast (in 10 seconds) but the processing of the data is not. In :nEvent, I basically save and plot the data. The saving process is not slow. However, our videocard is so SSSSLOOOW and can not keep up with realtime data display. After the user is done collecting the data, they do not want to wait for the screen to plot the data from the buffer. So after the data collection is done, I basically stop the plotting process but we still need to flush the data out from the buffer for saving. My question is that how can I tell when the buffer is empty.
Thanks,
Yajai
m_task = std::auto_ptr<CNiDAQmxTask>(new CNiDAQmxTask("aiTask"));
m_counter = std::auto_ptr<CNiDAQmxTask>(new CNiDAQmxTask("coTask"));
m_task->Stream.Timeout = -1;
//Create a channel
m_task->AIChannels.CreateVoltageChannel(physicalChannel, "",
static_cast<DAQmxAITerminalConfiguration>(DAQmxAITerminalConfigurationRse), minimum, maximum,
DAQmxAIVoltageUnitsVolts);
m_task->Timing.ConfigureSampleClock(counterSource, sampleRate,DAQmxSampleClockActiveEdgeRising,DAQmxSampleQuantityModeContinuousSamples, samplesPerChannel);
m_task->Stream.Buffer.InputBufferSize = samplesPerChannel * 2000;
m_counter->COChannels.CreatePulseChannelFrequency(counterChannel, "coChannel", DAQmxCOPulseFrequencyUnitsHertz, DAQmxCOPulseIdleStateLow, 0, sampleRate, 0.5);
m_counter->Timing.ConfigureImplicit(DAQmxSampleQuantityModeFiniteSamples, samplesPerChannel);
m_task->Control(DAQmxTaskVerify);
m_counter->Control(DAQmxTaskVerify);
m_counter->Triggers.StartTrigger.ConfigureDigitalEdgeTrigger(
referenceTriggerSource, DAQmxDigitalEdgeStartTriggerEdgeRising);
m_counter->Triggers.StartTrigger.Retriggerable = true;
m_taskRunning = true;
m_counter->Start();
// Set up the graph
m_Graph.Plots.RemoveAll();
for (unsigned int i = 0; i < m_task->AIChannels.Count; i++)
m_Graph.Plots.Add();
m_Graph.Plots.Item(i+1).LineColor = m_colors[i % 8];
// Create Multi-channel Reader
m_reader = std::auto_ptr<CNiDAQmxAnalogMultiChannelReader>(new CNiDAQmxAnalogMultiChannelReader(m_task->Stream));
m_reader->InstallEventHandler(*this, OnEvent);
m_reader->ReadMultiSampleAsync(samplesPerChannel, m_data);Yajai,
I'm a little confused about your acquisiton. Do you intend for it to be
finite, or continuous? I'm also unclear about your rates. You state
that you are acquiring 1024 samples at 500kHz, yet you get only 370k
samples in 10 seconds. Are you periodically acquiring 1024 samples at
500kHz? Do you do any reads other than the final m_reader->ReadMultiSampleAsync(samplesPerChannel, m_data)? Could you provide the code where you stop the plotting process?
Thanks,
Ryan V.
Ryan Verret
Product Marketing Engineer
Signal Generators
National Instruments -
How to add spaces at the end of record
Hi Friends,
i am creating a file which contains more than 100 records.
In ABAP i have internal table with on field(135) type c.
some time record have length 120, somtime 130 its vary on each record.
but i would like to add space at the end of each record till 135 length.
Can you please help me how to add speace at the end of record.
regards
MalikSo why did you said that in your first posting? My glass sphere is out for cleaning...
Instead of type c use strings and add spaces until they have the appropriate length.
loop at outtab assigning <pout>.
while strlen( <pout>-val ) < 135.
concatenate <pout>-val `` into <pout>-val.
endwhile.
endloop. -
How to add marker on the clip?
Hi!!!
Could you help me, how to add marker on the clip? Not on the sequence. I need the marker to moving as I moving clip in the sequence.
Thanks!!!Ohhh... I just had to switch to the source monitor. OK. Just I don't use the source monitor usally. Only the program one. Thank you. It worked!
Fri, 12 Oct 2012 05:02:08 -0600 от Jim Simon <[email protected]>:
>
>
Re: How to add marker on the clip?
created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion -
How to add filter in the dist. model
hi,
how to add filter in the dist. model
thanks
RubanHi,
Please try this.
1. Go to transaction BD64.
2. Click on Change button.
3. Expand the corresponding model view.
4. Expand the corresponding message type (i.e MATMAS).
5. Place the cursor to 'No filter set' and double click.
6. Click on Create Filter Group.
7. Add your filter from here ...
8. Once done, save the model view.
For more information, please check this link.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
Regards,
Ferry Lianto -
How to add Acrobat to the Microsoft Office ribbon?
how to add Acrobat to the Microsoft Office ribbon?
Hi ebender888,
What versions of Acrobat and Office do you have? See if this post helps: https://answers.acrobatusers.com/Why-Acrobat-PDFmaker-Office-COM-Addin-tab-disappearnig-Wo rd-Office-2013-q152959.aspx
If not, let us know what software you're using, and we'll try to get you pointed in the right direction.
Best,
Sara -
HT5654 how to add videos to the ipad using the latest version of itunes
how to add videos to the ipad using the latest version of itunes ?
Hello zaraa90,
After reviewing your post, I have located an article that can help with syncing content. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
Sync your iPhone, iPad and iPod with iTunes using USB
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
How to add Video on the OAF page like youtube ?
Any one know how to add Video on the page?
If you are getting HTML code from one of these slideshow.com places, you can add this code to your iWeb pages with a little bit of work. Two things to keep in mind...1. No way to do this via iWeb directly, so it involves editing the published html files, and 2. Because iWeb republishes the html files whenever you update the your webpage, you will lose your changes and have to redo them to add your slideshows back.
The general directions are as follows...
1. Decide where you want your slideshow and know exactly what dimensions you need.
2. Insert a text box onto your page and adjust its size to exactly your dimensions.
3. Type in some uniquely identifiable text like, "SLIDESHOWHERE" without changing the font or anything else...just type it in.
4. Publish your page with iWeb.
5. Find the html file associated with your published page (either on your iDisk or in a folder depending on how you published) and open it in any text editor (like Microsoft Word, or Textedit, or anything). You may need to set your text editor to "ignore rich text" or to "show HTML source".
6. Scroll through the html file and locate your placeholder text, e.g. "SLIDESHOWHERE".
7. Replace the placeholder text with your html code and save your page.
That's it. You should see your slideshow element show up in Safari where you placed the text box in iWeb! -
Reg:How to add fields to the scripts in detail
How to add fields to the scripts in detail.
Plz give me one example help me out.Hi
add fields to the scripts by sending that field between two &s.
for example if u want to add lifnr of lfa1 table then pass field like this.
&wa_lfa1-lifnr&.here wa_lfa1 is work area for internal table it_lfa1.
if name1 then &wa_lfa1-name1&
in this way you can add fields to the script under any window.
i am sending one example program for scripts.
&--structure declaration--
TYPES:BEGIN OF ST_LFA1,
LIFNR TYPE LFA1-LIFNR,
NAME1 TYPE LFA1-NAME1,
LAND1 TYPE LFA1-LAND1,
ORT01 TYPE ORT01,
REGIO TYPE REGIO,
END OF ST_LFA1.
TYPES:BEGIN OF ST_EKKO,
EBELN TYPE EKKO-EBELN,
BUKRS TYPE EKKO-BUKRS,
AEDAT TYPE EKKO-AEDAT,
ERNAM TYPE EKKO-ERNAM,
BSTYP TYPE EKKO-BSTYP,
LIFNR TYPE EKKO-LIFNR,
END OF ST_EKKO.
TYPES:BEGIN OF ST_EKPO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
LOEKZ TYPE EKPO-LOEKZ,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
NETWR TYPE EKPO-NETWR,
END OF ST_EKPO.
&--internal table,work area declaration--
DATA:WA_LFA1 TYPE ST_LFA1,
IT_LFA1 TYPE STANDARD TABLE OF ST_LFA1,
WA_EKKO TYPE ST_EKKO,
IT_EKKO TYPE STANDARD TABLE OF ST_EKKO,
WA_EKPO TYPE ST_EKPO,
IT_EKPO TYPE STANDARD TABLE OF ST_EKPO.
&--data declaration--
DATA:TOTAL TYPE EKPO-NETWR,
V_EBELN TYPE EKKO-EBELN.
data: v_item(20) type c.
&--parameter for purchase document number--
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS P_PURDOC LIKE V_EBELN.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA_FROM_EKKO.
PERFORM GET_DATA_FROM_LFA1.
PERFORM GET_DATA_FROM_EKPO.
&--grand total--
LOOP AT IT_EKPO INTO WA_EKPO.
TOTAL = TOTAL + WA_EKPO-NETWR.
CLEAR WA_EKPO.
ENDLOOP.
&--open form--
CALL FUNCTION 'OPEN_FORM'
EXPORTING
DEVICE = 'PRINTER'
FORM = 'Z_50886_VENDOR'
LANGUAGE = SY-LANGU
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
CODEPAGE = 11
OTHERS = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for header details--
READ TABLE IT_EKKO INTO WA_EKKO INDEX 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'HEAD'
WINDOW = 'HEADER'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for item details--
LOOP AT IT_EKPO INTO WA_EKPO.
concatenate wa_ekko-ebeln wa_ekpo-ebelp into v_item.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM'
WINDOW = 'MAIN'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
&--write form for vendor details--
READ TABLE IT_LFA1 INTO WA_LFA1 INDEX 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'VENDOR'
WINDOW = 'ADDRESS'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for grand total--
CALL FUNCTION 'WRITE_FORM'
EXPORTING
WINDOW = 'TOTAL'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--close form--
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form get_data_from_ekko
FORM GET_DATA_FROM_EKKO .
SELECT EBELN
BUKRS
AEDAT
ERNAM
BSTYP
LIFNR
FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = P_PURDOC.
ENDFORM. " get_data_from_ekko
*& Form get_data_from_lfa1
FORM GET_DATA_FROM_LFA1 .
IF NOT IT_EKKO[] IS INITIAL.
SELECT LIFNR
NAME1
LAND1
ORT01
REGIO
FROM LFA1 INTO TABLE IT_LFA1 FOR ALL ENTRIES IN IT_EKKO WHERE
LIFNR = IT_EKKO-LIFNR.
ENDIF.
ENDFORM. " get_data_from_lfa1
*& Form get_data_from_ekpo
FORM GET_DATA_FROM_EKPO .
IF NOT IT_EKKO[] IS INITIAL.
SELECT EBELN
EBELP
LOEKZ
AEDAT
MATNR
NETWR
FROM EKPO INTO TABLE IT_EKPO
WHERE EBELN = P_PURDOC.
ENDIF.
ENDFORM. " get_data_from_ekpo -
How to add reminders on the new ios6? I don't have the plus (+) on the upper right as seen on ios5 to add reminder.
Also, tap the lines at the top left and create a new list, that should give you the + back.
-
How to add subpartitions to the existing subpartition template
Hi All,
My Question is ,how to add Subpartition to the exiting subpartition template. e
like i have created a table with subpartition template with with 5 subpartitions like
subpartiton one_1 value (121)
subpartition two_2 value(122)
and now i one to add one more subpartitin to the existing subpartition template(Like modify the existing subpartition templete).
subpartition three_3 value(123)
Could any suggest me.
Thanks
Sree>
My Question is ,how to add Subpartition to the exiting subpartition template.
>
Follow the example in the section for 'Modifying a Subpartition Template' in the VLDB and Partitioning Guide
http://docs.oracle.com/cd/E11882_01/server.112/e25523/part_admin002.htm#i1007904
>
You can modify a subpartition template of a composite partitioned table by replacing it with a new subpartition template. Any subsequent operations that use the subpartition template (such as ADD PARTITION or MERGE PARTITIONS) now use the new subpartition template. Existing subpartitions remain unchanged.
If you modify a subpartition template of an interval-* composite partitioned table, then interval partitions that have not yet been created use the new subpartition template.
Use the ALTER TABLE ... SET SUBPARTITION TEMPLATE statement to specify a new subpartition template. For example:
ALTER TABLE emp_sub_template
SET SUBPARTITION TEMPLATE
(SUBPARTITION e TABLESPACE ts1,
SUBPARTITION f TABLESPACE ts2,
SUBPARTITION g TABLESPACE ts3,
SUBPARTITION h TABLESPACE ts4 -
How to add Dimensions to the data in OEID
Hi ,
I am relatively new to OEID with some background on Endeca web commerce.
We are trying to import the data from OBIEE server into the OEID . We are able to achieve this by using Load Data from OBI server option in Integrator.
The issue we are facing is that all the attributes are under navigation pane in studio when we load the data source in a studio application. What we need to have is to remove some of the attributes (that are not managed) and add some managed attributes (a.k.a dimension).I understand PDR and DDR need to be worked on . But my question is that how is the association of attribute to the PDR and DDR managed?
Any help would be appreciated. Or any pointer to the document that can help in this will also be great as I could not find documentation to add dimensions(managed attributes)
Version : OEID 3.0
Regards,
Mayank BatraMayank,
Is it mandatory that I have OUTER_TRANSACTION_ID (even if I try to run this current graph only) ? The OUTER_TRANSACTION_ID parameter is necessary if you want to run the graph as part of an outer transaction. Configuration graphs such as this one are often included in outer transactions used to refresh the data domain. You can omit it from the Web Service Client during development, but if you decide you want to include the graph in an outer transaction, you will need to add it.
I am adding a Web Services Client and linked to the input port of this WSC ,the output port of the transformer. Where does the code mentioned in the link goes?Do we need to keep the code in a file and pass the URL to the WSC because looks like that is what it takes. As stated earlier in the topic, graphs used to load the standard attribute schema generally follow a standard pattern. See http://docs.oracle.com/cd/E39272_01/integrator.300/integrator_users/src/ci_csv_based_configuration_graphs.html for details about these graphs.
You do not need to store the output of the Transformer as a file. The XML document output by the Transformer component is held in memory during processing.
Note, BTW, that your graph should also include a Denormalizer component between the Transformer and the Web Services Client.
Basically, once the input is read into the graph, it is processed by a Transformer component to create an XML document that can be incorporated into a Web Services request.
The XML document output from the Transformer component includes line breaks. The line breaks cause the input Web Services request to be terminated incorrectly. Therefore, the output from the Transformer should be fed into a Denormalizer component and converted into a single XML string. This string is then added to the Web services request in the Web Services client and submitted to the Endeca Server.
RLJII -
Downloads - How to add it to the computer
Hi There.
Once we get to the link from Busines Objects Software Download, and see the zip file. How do we actually add it to the computer? I double click to open, then a box appears with files. Then what??
I am from SAP Active Global Support, requesting info, to be able to assist customers.
Thanks, kind regards
Joni McCullochHi Joni,
When we download any files from Business objects and we are unable to open or identify the files to open them it is suggested to have WinZip installed on our machine.
1.We can free versions of Win Zip form our Google Search and install them on our machine.
2.When we try to open and save them it would prompt you to save them on the Destination location where we want to save it locally.
3.When we click on Extract button or Right click on the down loaded .zip file or .rar file extension you could see extract here and the folder will be created on the same location where the file is downloaded.
Please let us know if you have any queries.
Regards,
Naveen. -
How to add text to the summary
I wanted to add a text to my summ total on my report.
The forum told me to add a boiler plate text item. However this item displays on every page.. I want it to only display where the summary is. I tried using anchors but it will not attach to the summary item.. Help
howardHi Howard,
I guess you are referring to this post:
How do i add text to the summary
First make sure that you place the boilerplate exactly where you had (or currently have) the summary column, ie, in the SAME frame or repeating frame.
Second, open the property inspector for your summary column. Find the properties "Print Object On" and "Base Printing on", and make sure that both of these are the same for your boilerpate as for your summary column.
Navneet. -
Simple question - How do I add photos to the body of my emails . But instead of the answer - Found 1000 results for How do I add photos to my emails for Thunderbird. There are answers that don't apply at all to the question in anyway. Why does it have to be so hard to get a simple answer to a simple question?
Thunderbird is acting much like Microsoft, the every reason I dumping MS Live Mail.First of all, much help for Thunderbird refers to menus which may not be visible. It would help you and us if you have your menus and toolbars visible.
http://chrisramsden.vfast.co.uk/13_Menus_in_Thunderbird.html
So, open a write window. Enable its menu and toolbar(s).
Now do you see an "Insert" option?
If not, you may be set to compose in plain text, which does not support embedded images.
'''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Account Settings]|{select account}|Composition & Addressing''' and ensure "Compose messages in HTML format" is ticked. If it wasn't already ticked, go back to composing a message. Any better now?
Once you have HTML composition mode going, you can use '''Insert|Image''' or various permutations of copy-and-paste and drag-and-drop into your message body.
A manual, of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/
Maybe you are looking for
-
How do i reinstall photos back into iphoto5?
I accidentally messed up my photo library and had to erase it to start again. I have a complete back up reinstalled on the hard drive, but dont know how to get the computer to recognize the folder and load the pictures so that i can see them when i o
-
Hi, I need some help, How do I change my Icloud ID on my mobile, I have changed it on my computer and in other settings on the phone, but the actual icloud ID has not changed on my phone and my music is not syncing to my phone
-
How do I get my swatches to load again? I moved Illustrator from org. fold. then put back. now?
I moved Illustrator app from its org. fold. then put it back. now my swatches wont load.
-
When I insert my images into the webpage template and they turn soft, even when they were very sharp to begin with. This also happens in Pages. Has anyone experienced this? And does anyone know how to prevent this from happening? When I set up a phot
-
Hi Experts, We have the Special user id specifically created to receive emails. The requirement is to send Notification mail to the emails received after few verifications. We have assigned the Z class in SO50 for this recipient address. And this Z c