How to add Servicemark symbol?

I've seen how to add copyright and trademark symbols, but does anybody know how to add the servicemark (SM) symbol?
Thanks.

Mac OS >> FInder >> edit >> Special Characters > type service in search at bottom right
Trouble is many fonts do not have this, so you may prefer to set a superscript SM.

Similar Messages

How to add a symbol to existing keyframes

I have completed a bunch of keyframes with 2 symbol on each moving around. Now I want to add another symbol that will be static. That is, at the same position in each keyframe.
How can I add the new symbol to 250 keyframes that are already set and already have 2 symbols in each?
I can see how to do it one by one... but there must be a better way than that. selecting a herd of keyframes and pasting in the new symbol, ends up only effecting which ever one has the play head.
I also realize I should have put this final symbol in at the start but too late now. So how can I insert a new symbol in 250 keyframes all at once?

Create a new layer for this new symbol. Place the symbol in the first frame. Right click the last frame on that layer where you want the symbol to extend to (250?) and select Insert Frame.

How to add these symbols to Photoshop

Hi there,
I am trying to add some texts to my picture in photoshop and I would like to add symbols like the ones I attached here.
Does anyone know where to find and how to add them?
thanks,
Rose110ca

You need to ues the text tool from the toolbox. Simply click it and put it on a location you would like to create a text layer. Once created you can use the selection tool to move it around.
Vancouver wedding photography <a href="http://www.vividdreams.ca">vancouver wedding photography</a>

How to add a symbol to the beginning of a project?

I have a pretty intricate Animate composition. I want to add a simple Symbol/Animation at the beginning. I've tried inserting time and it did nothing. Basically, I just want to shift everything over a couple of frames. I thought of turning the balance of the composition into a symbol, but a lot of the interactivity is based on Labels on the stage's main timeline, and it breaks when I try to convert to a symbol. I'm not sure what I'm missing here? Any help would be truly appreciated!
Thanks!
Jon

Hiya Res,
I will definitely give it another shot. I tried that, but I think I might've given up too easily . I'll let you know how it works out.
Thanks!

How to add one symbol for field in mapping

Hi Experts,
I am doing proxy to file scenario.
my requirement is like this, i need to add ~ symbol for each fieldbefore sending to receiver.
if the field length eqal to 12 the target field must be like this.
if the field is contains 6 characters the remaining characters must be filled with spaces and after hat i need to add ~ symbol.
~978976 ~
How can achieve this, can anyone help me.
Kind regards,
Praveen.
Edited by: Praveen Kumar on Aug 4, 2009 1:09 PM

Hi,
In my understand String.format standard function will support JDK1.5 onwards. Lower version will not support. So,check in your jdk version before use that standard function.
So another way use this code,
UDF header like this,
Public String <udf name>(String a, Container container))
Inside UDF put this code:
int strLen = a.length();
for(int i=strLen;i<12;i++)
a = a + " ";
return "~" + a + "~";
Note: . Example: in this code field length is using 12. becaz we mentioned that loop i<12. If what you need put it instead of 12.
Hope It's working fine .
Regards
Vijaykumar

How to add the  symbol

Hello again-
How do I add the Apple () symbol to my posts? I just did this one by copying and pasting from another thread, but I am sure there is a better way.

Hi Miriam,
Yes I went and slept after I posted to you.
I presume the 4 key where I see the $ as Shift + 4
Mine on my Wireless Keyboard is marked as also having the Euro sign there (€) which on my Mac keyboards is Alt + 2 but I would guess is possibly somewhere else on yours.
Also Hi skalicki`
(That trailing tick sort of symbol also has me fooled I had to Copy and Paste)
Can I thanks you for the Points.
P.S. I think I have found it.
The Mac Keyboard and the one I am using seem to also interchange the keys left of Z and to the left of 1 of the Qwerty part. (not number pad)
7:39 PM Friday; May 22, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

How to add ASCII symbol to Front Panel

Hello,
I am trying to add an ASCII character to the front panel but I cannot figure out or find out how to do it. It should be ALT key plus the decimal code I thought.
Any help would be appreciaited.
John

you can enter an "e", select the character, and change to symbol font.
LabVIEW Champion . Do more with less code and in less time .

How to add a symbol to the stage with a unique click function

I created a symbol in the Library and am loading multiples of it based on json data. However, I want to give each one a unique click function based on the json data. For example if you are the 4th symbol, you should change the color of another symbol when clicked. However, if the 5th symbol is clicked, it should be a different color. And so on.

What I would do:
add a class name for each symbol in your json file or on symbol creation.
Then use each class name and assign it a click event.
to assign a unique id or class to symbol you create use:
for (var i=0;i<data.length;i++){
var el = sym.createChildSymbol("pEl", container);
el.element.attr("id","newEl"+i);
// or for a class use el.element.addclass('className'+i);
Note when using the new id make sure you add # in name
example
sym.$('#pEl'+i).......
and a dot for the class name
sym.$('.className'+i) ..............

How to add a symbol in the table control

Hi Experts,
I have created a Table control and want to insert a Symbol in a column and also want it to be interactive. That means when that symbol is being clicked it should perform some action.
Your help is appreciated. This is a little urgent.
~Sid
"Max points are guarenteed"

Hi,
Create a pushbutton in table control by dragging it from tool and place it in table control.And then set the name for that pushbutton.Make that push button field as output only field by check/mark -ing a check box of output field in program tab of screen attributes .Now the icon check box for that field will be active .Mark/check that <b>icon</b> check box as well.Once you done this ,then in Loop endloop of table control in PBO do the code like this.
Process Before Output.
LOOP AT   it_t001l INTO x_t001l WITH CONTROL tc CURSOR tc-current_line.
    MODULE tc_get_lines.
ENDLOOP.
MODULE tc_get_lines OUTPUT.
IF x_t001l-status = 'X'.
    CALL FUNCTION 'ICON_CREATE'
    EXPORTING
      name                         = 'ICON_OKAY'
     info                             = 'Completed'
   IMPORTING
     RESULT                      = x_t001l-change .
*----- x_t001l-change -
> name of the push button in table control
ELSE.
    CALL FUNCTION 'ICON_CREATE'
   EXPORTING
     name                        = 'ICON_MASS_CHANGE'
      info                        = 'Partial'
IMPORTING
    RESULT                      = x_t001l-change .
ENDIF.
g_tc_lines = sy-loopc.
ENDMODULE.                    "TC_GET_LINES OUTPUT
In top include
DATA:BEGIN OF x_t001l.
        INCLUDE STRUCTURE t001l.
DATA:sel,
<b>change(60),   "</b> ---> name of push button
     END OF x_t001l.

How to add one symbol in between the user give input.

Hi,
     In my flash had the following code.
import flash.events.TextEvent;
tf.addEventListener(TextEvent.TEXT_INPUT, tfHandler);
function tfHandler(e:TextEvent):void{
    trace(e.target.text.length);
    if(e.target.text.length == 2){
        e.target.appendText("-");
        stage.focus = tf;
        tf.setSelection(tf.text.length,tf.text.length);
     Like this How to do in AS2.?
Thanks with,
Viswa

Use:
tf.onChanged = function(){
    if(tf.length == 3){
       tf.text += "-";
       Selection.setSelection(tf.text.length, tf.text.length);

How to add an event after ALL the components of an animation(incl. symbols)were created and played?

I would like to add a button/trigger that goes back to the beginning of the animation when all the elements of my composition, including symbols which have their own timelines and trigger buttons, were created and drawn/played. It should be independent of the main timeline.
Is there any way to do it?
Thanks!

Can a click event handler be added to the stage to control symbols that are on the stage? Like this question How to add a symbol event handler (on click or on mouseover) on the stage timeline
Basically we are looking for way to load in a bunch of instructions at run time, instead of having to individually control each individual symbol.

How to add supercripts in a text field

How to add superscripts symbols like copyright,trademark and registered symbols in a static text field in the Livecycle designer 8.2?

You can copy-and-paste special characters directly into a text object from a text editor such as MS Word. Alternatively, you can insert the hex character reference into the XML source for the applicable text object instance. For example, to add a copyright symbol, go to the XML Source tab and insert the reference © into the XML node <value><text>Foobar©</text></value>.
Steve

How to add actionscript to a movie symbol

I am a complete newbie to actionscript and flash. I am using
Flash CS3 with Mac OSX.
I need to know how to add actionscript to a movie symbol?
I made a circle and coverted it into movie symbol. After
selecting it and opening Windows > Actions, it says that the
currect selection can not have actions applied to it.
I have also tried ticking the Export for actionscript option
and leaving the default options on, but still no use.
can someone please help me?

ticking Export for actionscript isnt doing anything for you,
thats to attach a movie from the library... click your movie clip
symbol, in the properties panel, click where it says 'Instance
Name', and give it a unique name, lets say, my_mc. then in an
actions layer, ON A KEYFRAME, add this
my_mc.onRelease
or
my_mc.onRollOver
or
my_mc.onRollOut
and so on, but that's how you reference the movie clip... by
its instance name

How can I add a symbol on top of text in Iweb?

Hi there,
How can I add a symbol on top of a text box in iweb. When I add it, the symbol moves to the left or right of the text instead of right on top of it.
Any suggestions would be appreciated.

Here I clicked out side of any text box and drew a star from the shapes panel.

How do i add gender symbols while working in Word? They are not an option in the existing symbols.

I am trying to add gender symbols while typing in word. I can't find the symbols as pre-existing in the drop down menus. How do I add them?

♂♀
MAdirK
You can use the Character Palette to insert these - see above
Choose View [All Characters]
Choose Miscellaneous Symbols
Verify [By Category]
Choose Collections: [Containing selected character] - this will display the fonts that have the character you select
Locate and choose the symbol you want - then choose the font you wish [4]
Double-click the character OR choose [Insert] to insert where the cursor is in your document
You should probably play around with the Character Palette, in particular 'Favorites'(at the top near [3] 'by Category'), which will save all your cool symbols not available from the keyboard. Just DBL+click the favorite symbol and voila!
regards
CCC

How to add Servicemark symbol?

Similar Messages

Maybe you are looking for