How to add ship To field to Shopping Cart

I have a request to add ship to address field for Limit shopping carts. Can any one please let me know how we can do the same?

Hello,
Usually, delivery address tab is displayed in limit shopping cart. Some other fields are not displayed, but delivery address is.
Check the following wiki page:
http://wiki.sdn.sap.com/wiki/display/SRM/LimitShoppingCart-Somefieldsarenotdisplayed
Regards,
Ricardo

Similar Messages

New Customer Field in Shopping Cart (SRM) with default value

We have requirement to add new Customer field in Shopping cart (SRM 4.0) and assign a default value to it.
We have added the custom field and also assigned default value 'X' to it using BADI BBP_CUF_BADI_2 method MODIFY_OUTPUT. Problem we are facing is in case user changes the value and unchecks the custom field then it gets overwritten by default value once the shopping cart is saved. We have followed steps mentioned in link below in order to add custom field and populate it.
/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm
KR Jaideep,

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Addign new customer field in Shopping cart SRM with default value

We have requirement to add new Customer field in Shopping cart (SRM 4.0) and assign a default value to it.
We have added the custom field and also assigned default value 'X' to it using BADI BBP_CUF_BADI_2 method MODIFY_OUTPUT. Problem we are facing is in case user changes the value and unchecks the custom field then it gets overwritten by default value once the shopping cart is saved. We have followed steps mentioned in link below in order to add custom field and populate it.
[/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm|/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm]
KR Jaideep,

Hi,
In badi BBP_CUF_BADI_2, method MODIFY_OUTPUT,
are you doing something like this?
CASE IV_FIELDNAME.
WHEN 'YOUR_CUSTOM_FIELD'.
    IF IV_VALUE IS INITIAL.
      MOVE 'YOUR_DEFAULT_VALUE' TO EV_VALUE.
    ENDIF.
ENDCASE.
Best regards.
Edited by: Pablo Casamayor on Jul 23, 2009 12:32 PM

How to Add new fields to Shopping cart?.

Hi SRM GURU'S,
I am using SRM 5.5 and ECC 6.0 and Extended Classic scenario.
As per business, I want to add New fields to Shopping cart. How can I add?. Please any one give me clear details about this
I am planning to add 2 fields 1. Commitment Item and 2. Fund center. in Cost Assignment tab. Is it possible?. This data has pass to follow on documents. Backend documents has this provision. Is this option available in Shopping cart?. If yes please give me the details.
Kindly respond quickly. Thanks in Advance.
Regards,
John.
Edited by: johnmiller465 on Sep 22, 2009 1:13 PM
Edited by: johnmiller465 on Sep 22, 2009 1:18 PM

Hi Deepti/Shital,
Thank you so much for your reply. I have awarded points. One more question. While creating creating PO from Process Bid Invitation, PO is not replicating into ECC. Do you have any idea?. Please help me to findout. Respond quicklly
If it will not replicate, how to create backend PO refering with SRM PO.
Regards,
John.
Edited by: johnmiller465 on Sep 23, 2009 11:53 AM
Edited by: johnmiller465 on Sep 23, 2009 11:55 AM

How to add ship-to and sold-to party name in a view table.

Hi Expert,
May i know how to add in the field names for ship-to and sold-to party name in a view table? I know that the name should be retrieve from KNA1 but how to map the name to the respective fields? Please help urgently. Thanks.
Regards,
Shawn
Message was edited by: Manish Kumar : Do not use urgent word.

Hi,
     Use Table KNVP for Codes and Join with KNA1 for names using Alias LIKE
     select a~kunnr a~name1 b~kunnr b~name1 from
       kna1 as a
     INNER JOIN
       kna1 as b on a~kunnr eq b~kunnr
       INNER JOIN knvp as c
     on a~kunnr eq c~kunnr
     INTO TABLE IT_SHIP
     where c~parwe in ('AG','WE')
     AND KUNNR IN .....

How to add the date field in the dso and info cube

Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KK

my prob is solved
KK

How to hide custom fields in Shopping cart depening on user role

Hi,
We have some custom fields in shopping cart for basic view. Every thing works fine. Now client is asking to hide all the custom fields based on user role.
I found some function module to fund roles. now my main problem is unable to find the cusotm filed screen field name.
When I tryed to find the screen field name using BBPSC02/03, its giving 'GT_DISPLAY_100-FIELD'. If I try to use this field, its not working.
Could you pls tell me how to find custom screen filed name to hide in shopping cart.
Thanks,
Ram

Hi Ram,
As Laurent suggested,to hide the custom fields based on the user role,you need to implement the logic in BADi "BBP_CUF_BADI_2".
You have the importing parameter IV_USER in this BADI.
Pass this parameter to tables AGR_USERS and AGR_USERT to get the user role
OR
Use FM: BAPI_USER_GET_DETAIL
with USERNAME= user id and can retrieve Table: ACTIVITYGROUPS Field:AGR_NAME
if you want the otherway around
you can also use FM: RSRA_USERS_OF_AGR_GET
with I_AGR_NAME= role and you can retieve Table: ACTIVITY_GROUPS_USERS Field: UNAME(usr Id)
Then check the value for the User role as obtained using the above steps and accordingly set the property for the custom fields to hide them.
BR,
Deepti.

How to add a new field in MM01, with say contaminent as a field?

How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

How to add an input field in the web UI of CRM 2007

Hi everybody.
I want add an Input field in the Web UI Screen. How it is possible.
I want get the information with detailed descriptions if possible with screen shorts.
What type of methods it will be generated and what are the code we entered in those methods.
Take according to any example. But with detailed description.
I am new for the CRM 2007. So, please give the screen shorts with proper data.
Not only adding the field. If any data i entered in the adding field then that will be stored in the tables otherwise no use by adding the field.
So, Can anybody please send a proper information according to this.
Here another one How to Add our own table (Ztable) field in the Web UI Screen.
How to add the same field in the BOL.
Please expalin about those concepts with full of screen shorts messages.
Thank You.
Regards,
Krishna.

If you want to add extra standard fields (like one you mentioned), you can use Component Workbench and Copy the configuration and create your own configuration and make the "Available Fields" appear there.
If the standrd field is not available, you can Add Context Node using wizard and make it visible.
If its a custom field (a new one); you will have to use EEWB and add the fields and then make it visible in the UI using Component Workbench.
Regards,
Alin

How to add a customer field or extn coll in the tab1&2&3..of a UDO doc?

Hi Experts,
Does anybody know how to add a customer field or extn collection in the unused tabs like tab1&2...in a UDO document?
Thanks for your reply in advance.
Thanks & Regards,
David

Hi Subhasini - 
It seems you have discovered that adding an extension field to the Project Suppliers collection is not possible; many of the collections in E-Sourcing do not support extensions and, even when they do, typically, the table view of the data cannot be changed to show the extension value (it would only show on a "details" page, for example. 
The solution that you have proposed may work, although I think there is a slight mistake in your logic. I believe you are saying that the script would take data from the newly created extension collection and populate data in the out-of-the-box vendor collection. 
In thinking about your solution, I believe the benefit is that any logic and reporting based on the standard collection continues to function correctly (e.g., creating an RFx from the Project will use the out-of-the-box vendor collection). 
That being said, I generally am reluctant to do a "replace" of a standard collection with an extension collection as you propose. My recommendation is that you challenge the customer on the importance of this requirement. For example, could the code be maintained on the vendor record? Why is it maintained in Projects? If it is maintained in the vendor record, could you just populate a read only collection the Projects that shows the vendor and code? Could a report be written that can be launched from within the Project to show the values? How does the customer intend to use this field? Could the display name of the vendor object be the right place for it? 
I hope these ideas are helpful. 
Regards, 
Rob

How to add a Custom field in the Standard SAP Sales Order main screen

Dear Experts,
We have a requirement of adding a Custom field in the Sales Order screen. I know how to add the Customer field in the Additional data B tab of the Sales Order Header Screen as that is the screen user exit provided by SAP. Can someone tell me how to add the Custom field in the Sales Order main screen. Program Name - SAPMV45A and Screen Number - 4001. What is all I need to take care.
Thanks,
SNK.

I have not added the Custom filed in the main screen and added in the Additional data B screen. So closing the message.

How to add new text field in standard report

how to add new text field in standard report?

Hi,
I presume you are talking about a report display in ALV and u wish to add a column to it .
If it is a global requirement ,as in table being used there in ALV can be modified, then you can append the table and the system should pick up the same automatically from there.
Otherwise , you can make a Z program . Modify the catalog being used in ALV.
Regards,
Shweta

How to add new customise field in standard SAP ME28 Report?

Hi Anybody,
How to add new customise field inside Standard SAP Screen report ME28?.
Anybody, Please tell me how to do?.
Thanks,
Regards,
S.Muthu.

Hi Subramaniyam,
You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field.

How to add one more field to an exist internal table

hi abapers
i am a very new abap programmer and just started learning it.
i want to know How to add one more field to an exist internal table.
lemme me put my question in a very simple way.
i have a internal table having fields f1,f2,f3 and which also that internal also contains some data.
now i want to add two more fields (mm & nn) to that internal table now.
how can i do that.
and i wanna know the websites names where i can find some brain teasing questions in abap programming.
eagerly waiting for ur reply
regards,
Maqsood A Khan

Hi, MAQSOOD.
You can insert more fields in your internal table like this.
refer this code snippet.
DATA : BEGIN OF tbl_itab OCCURS 0.
        INCLUDE STRUCTURE zsdtc009.
DATA : vkorg   LIKE vbak-vkorg, "inserted one
        vtweg   LIKE vbak-vtweg, "inserted one
        vkbur   LIKE vbak-vkbur, "inserted one
        vkgrp   LIKE vbak-vkgrp, "inserted one
       END OF tbl_itab.
you can also read the book "Teach yourself abap in 21 days"
at http://cma.zdnet.com/book/abap/
but that book is just about basic concept of abap and report program.
it doesn't give a lecture for on-line program.
you can get pdf version books(about abap, sap...things) from sap.
http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm
I wish I could help you.
Regards
Kyung Woo.

Hi All ,How to add a new field for MEDRUCK if we havea ZMEDRUCK

Hi All ,
 How to add a new field for MEDRUCK if we have a ZMEDRUCK
Req: If I want to add a new field for the following text editor line :
IN MAIN WINDOW > TEXT EDITOR> SERCH FOR TOTAL_AMOUNT-->
In that we will have
&ekko-waers& &komkfkwrt&
(currency) (numerics)
Pls send the Code to make these changes .Pls its urgent
Thanks&Regards.
Bharat.

Hi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
Reward points for useful Answers
Regards
Anji

How to add ship To field to Shopping Cart

Similar Messages

Maybe you are looking for