How to add smiley in message in 5233 model

Can any one help me to add smiley in message in 5233 model

The 5233 is an s60 phone, and s60 phones do not have smileys inbuilt (except for the upcoming N8). You would have to install A-SMS or FUNSMS from Ovi Store to get smileys.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

How to add an error message to an Output Type.

Hello SAPients,
Using a User Exit I'm modifying the segments of an outbound IDoc. When certain conditions apply I trigger an exception
RAISE DATA_NOT_RELEVANT_FOR_SENDING.
It's ok because the IDoc is not generated and the Output Type is set to "Incorrectly Processed" status.
But, when the user clicks the "Processing Log" button there is no informatio of the error occurred. How can I add an error message to the Processing Log of the Output Type?
Thanks in advance for your kind help.

Hi,
Try this statement..
      MESSAGE ID      sy-msgid << Your msg class
              TYPE    sy-msgty << Your message type
              NUMBER sy-msgno << Your msg no.
              WITH    sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4 << Other info
              RAISING data_not_relevant_for_sending.
Regards,
Joy.

How to use smileys in message in N79, please help

i had other nokia models wher in i used to send smileys in messages, but now i have taken N79 and there is no smileys insertion possible in it. please tell me how can i do so. if any software download is required then also please tell me

To get smilies on the N79 you need to install a piece of software called A-SMS.
It may be available in the ovi store or on the link below:
http://www.myasms.net/index.php

How to add OS X Messages app

how to add yahoo messenger to OS X Messages app

HI,
I used to have Yahoo Messenger as well as setting up the Yahoo Account in iChat 6 (and then updating the OS/App since to Messages 8 in Yosemite)
I never used the Yahoo app to access mail from Yahoo.
The version I have in Snow Leopard opens my Browser to login to web mail.
As the Error messages said the Messaging side the app did do does not work in OS X 10.10.x
It only lists setting the account up in Messages.
In System Preferences > Internet Accounts enabling it there for Mail will add an Account to the Mail app.
9:28 pm Wednesday; April 22, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to add an Alert Message

Hi, what steps must I take to add an alert message that reminds the Adobe Reader end user to Print their form if they wish to keep a record of their form data.
Also, where should such an alert appear, when and upon which event type?
Harry

Thanks Jimmy, unfortunately it doesn't work on my Submit button (which is where I do want it).. Here's what I have on the standard Submit button.
----- form1.SF_P8.SF_print-submit.EmailSubmitButton::click - (JavaScript, client) ------------------
xfa.messageBox("Please ensure you also print a copy for your records", Warning, 1, 1);
this makes my button do nothing at all, not even submit. I think it's because there are 2 events associated with it, the invisible "submit" and the new warning. Any suggestions?
Harry

How to add the error message into Delivery Error Log (VL10A,VL10X)

Hi,
I have a to add my custom message into Delivery creation error log (VBFS, VBSS)
This message should be shown in the Collective process log (VL10X, VL10A).
Please give me the soln to solve this problem.
I have searched in SDN, i didnt get the proper solution
Thanks
Shankar

HI,
Make use of the BADi "LE_SHP_DELIVERY_PROC"
Use the method DELIVERY_FINAL_CHECK.
Pass the error messages in table CT_FINCHDEL.
Regards,
Ankur Parab

How to add an error message to script?

Hi, every one
I got this script
function paste in place to next master
I want to add an error message to it, if there was no such thing as master B, C,D,E,F,G
instead of system error.
Teetan
var
myDialog = app.dialogs.add({name:"Copy Selected item(s) to chosen Master",canCancel:true}),
mStringList = ["Master A", "Master B","Master C", "Master D", "Master E","Master F", "Master G"];
with(myDialog){
with(dialogColumns.add()){
staticTexts.add({staticLabel:"Select a Master you want to copy to"});
with(dialogRows.add()){
var mySelection = dropdowns.add({stringList:mStringList, selectedIndex:0});
app.doScript('main()', ScriptLanguage.JAVASCRIPT, undefined, UndoModes.FAST_ENTIRE_SCRIPT, "Paste in place");
function main(){
if (!app.documents.length || !app.selection.length)
alert( "Nothing selected!" );
exit();
if (myDialog.show() == true)
copy_to_next_master();
function copy_to_next_master() {
var
mChoice = mySelection.selectedIndex,
mMsg = "Done.\rWhat you select is pasted in place to next documents - " + mStringList[mChoice],
nSel = app.selection.length,
mDone = false,
i,n,nextDoc,curSel;
for ( i = 1; i < app.documents.length; i++) {
nextDoc = app.documents[i];
targetMaster = nextDoc.masterSpreads[mChoice];
if (!targetMaster.isValid) {
mMsg += "\rCan't detect " + mStringList[mChoice] + " in a doc: " + nextDoc.name;
continue;
mDone = true;
for ( n = 0; n < nSel; n++ ) {
curSel = app.selection[n];
curSel.duplicate( nextDoc.masterSpreads[mChoice] );
mDone ? alert(mMsg) : alert("Nothing copied");

Sorry Jarek
I made a big mistake
I want add an error message in to this:
var curSel = app.selection[0];
for ( var i = 1; i < app.documents.length; i++) {
    var nextDoc = app.documents[i];
    if (!curSel) { alert( "Nothing selected!" ); exit(); }
    curSel.duplicate( nextDoc.masterSpreads[1] );
in case of I just want to paste in place to only on choice
Teetan

How to add a new element to a model node in the view controller?

View Context
    myNode
         attri1
         attri2
myNode is a web service model node. How to add a new element to this node?
Regards,
Hui
Edited by: Hui Wang on Feb 15, 2008 12:05 PM

Sudhir Gorantla wrote:>
> Hi,
>
> myNode
> attri1
> attri2
>
> IMyNodeElement ele=wdContext.myNode().createMyNodeElement();
>
> ele.setAttri1("");
> ele.setAttri2("");
>
> wdContext.nodeMyNode().addElement(ele);
>
> Regards,
> Sudhir
Hi we need a model as an input parameter when creating a element for a model node. How to get the instance of the model?
Regards,
Hui

How to add an image to combo box model in java

i want to display a images.for that i take a combox.in that i want to add al images those i want to display, while clicking the image in combo box the image will be display.there is no problem for displaying an image, but i dont know how to add
an image to a combo box model in net beans. please help me. if u have any idea plese forward to this mail
[email protected]

Hi Thomas,
You need to create an image field and in the source choose 'graphic content ; give the name of the variable which has the binary data . and give the type as 'MIME/image'.

How to add comments to parts on a model in Adobe Reader 3D

How do you add comments to parts on a model in Adobe Reader 3D.
I want the comments to only appear when the user selects the part of the model.

If a link starts with http:// then Reader will recognize it as a link and will make it clickable.
Reader will not recognize an email link. To make it a link you would need to use Adobe Acrobat's link tool or would have to create an email link in the original application use to create the document and convert the file to PDF leaving links intact.

How to add an error message in the application module?

Hi,
I have some code running in the application module. I want to display error messages in the messages section of the screen if an error happens in my code.
How could I achieve this?
I am using JDeveloper 10G
Thanks

Muhammed,
Have you tried throwing a JboException in your AM code?
John

How to add custom error message in standard application log of change doc.

Hi,
While saving chnage document I need to add raise an error on specific condition. As Error messages is being shown in application log I added custom message in include LCRM_1O_UIF15 by using BAL_LOG_MSG_ADD FM however it is not showing in the screen. What could be the reason? Can anybody please explain?
Rgds
Sudhanshu

Muhammed,
Have you tried throwing a JboException in your AM code?
John

How to add 16 bit message sequential number to the byte array

hi
iam trying to implement socket programming over UDP. Iam writing for the server side now.I need to send an image file from server to a client via a gateway so basically ive to do hand-shaking with the gateway first and then ive to send image data in a sequence of small messages with a payload of 1 KB.The data message should also include a header of 16 bit sequential number and a bit to indicate end of file.
Iam able to complete registration process(Iam not sure yet).I dnt know how to include sequential number and a bit to indicate end of file.
I would like to have your valuable ideas about how to proceed further
package udp;
import java.io.*;
import java.net.*;
import java.util.*;
public class Sender {
    protected BufferedReader in = null;
    protected FileInputStream image=null;
    protected static boolean end_of_file=true;
/** pass arguments hostname,port,filename
* @param args
* @throws IOException
   public static void main(String[] args) throws IOException{
        DatagramSocket socket = new DatagramSocket(Integer.parseInt(args[1]));
        boolean more_messages = true;
          String str1=null;
            * gateway registration
            try{
                 //send string to emulator
                String str="%%%GatewayRegistration SENDER test delay 10 drop 0 dupl 0 bandwidth 1000000";
                byte[] buff=str.getBytes();
                InetAddress emulator_address = InetAddress.getByName(args[0]);
                DatagramPacket packet = new DatagramPacket(buff, buff.length,emulator_address,Integer.parseInt(args[0]));
                socket.send(packet);
                    // figure out response
                byte[] buf = new byte[1024];
                DatagramPacket recpack=new DatagramPacket(buf,buf.length);
                socket.receive(recpack);
               // socket.setSoTimeout(10000);
                String str2=str1.valueOf(new String(recpack.getData()));
                if(socket.equals(null))
                     System.out.println("no acknowledgement from the emulator");
                    socket.close();
                else if(str2=="%%%GatewayConfirmation")
                //     String str1=null;
                     System.out.println("rec message"+str2);
                else
                     System.out.println("not a valid message from emulator");
                     socket.close();
            catch (IOException e) {
                e.printStackTrace();
                  end_of_file = false;
     /**create a packet with a payload of 1     KB and header of 16 bit sequential number and a bit to indicate end of file
while(end_of_file!=false)
      String ack="y";
      String seqnum=
       File file = new File(args[2]);
                InputStream is = new FileInputStream(file);
        socket.close();
private byte[] byteArray(InputStream in) throws IOException {
         byte[] readBytes = new byte[1024]; // make a byte array with a length equal to the number of bytes in the stream
      try{
         in.read(readBytes); // dump all the bytes in the stream into the array
        catch(IOException e)
             e.printStackTrace();
        return readBytes;


HI Rolf.k.
Thank you for the small program it was helpfull.
You got right about that proberly there will be conflict with some spurios data, I can already detect that when writing the data to a spreadsheet file.
I writes the data in such a way, that in each line there will be a date, a timestamp, a tab and a timestamp at the end. That means two columns.
When i set given samplerate up, that controls the rate of the data outflow from the device, (1,56 Hz - 200 Hz),   the data file that i write to , looks unorderet.
i get more than one timestamp and severel datavalues in every line and so on down the spreadsheet file.
Now the question is: Could it be that the function that writes the data to the file, can't handle the speed of the dataflow in such a way that the time stamp cant follow with the data flowspeed. so i'm trying to set the timestamp to be with fractions of the seconds by adding the unit (<digit>) in the timestamp icon but its not working. Meaby when i take the fractions off a second within the timestamp i can get every timestamp with its right data value. Am i in deeb water or what do You mean!??
AAttached Pics part of program and a logfile over data written to file
regards
Zamzam
HFZ
Attachments:
DataFlowWR.JPG ‏159 KB
Datalogfile.JPG ‏386 KB

How to add an aoutput message to posted ERS document?

I have credit/debit memo created in ERS run (tr MRRL) and I need add manually one output type to be able and print the proper document.
Is it possible?
Kind regards,
Ewa

Thanks Jimmy, unfortunately it doesn't work on my Submit button (which is where I do want it).. Here's what I have on the standard Submit button.
----- form1.SF_P8.SF_print-submit.EmailSubmitButton::click - (JavaScript, client) ------------------
xfa.messageBox("Please ensure you also print a copy for your records", Warning, 1, 1);
this makes my button do nothing at all, not even submit. I think it's because there are 2 events associated with it, the invisible "submit" and the new warning. Any suggestions?
Harry

How to add two different database connections on Model

Hi,
In my application, I need to create View Objects on different databases. So I need to add two different database connections on the Model.
But it seems like Model can be connected to only one database. I tried adding another project to add the second db connection. But after I created a read-only View Object in the second project, it didn't generate corresponding data control in the Data Controls panel.
Could anyone help me on this?
Thanks!

Do you mean adding the second project folder in ViewController->Project Properties->Libraries and Classpath?Yes, either that or: ViewController -> Project Properties -> Dependencies
And I didn't see the first Model project in the ViewController classpath. Otherwise it wouldn't work. The first model project IS in 'classpath'. Here's how:
ViewController -> Project Properties -> Dependencies
I tried this and recreated the View Object. Still didn't generate the datacontrol. No idea why you had to recreate the VO.
Is your VO in an application module inside the SECOND project?
After you are sure that everything is in the ViewController's classpath, just try restarting JDeveloper.
This is very basic. has to work.

How to add smiley in message in 5233 model

Similar Messages

Maybe you are looking for