How to add smugmug to lightroom

I moved to a new computer and I cannot recover my smugmug connection. How do I get smugmug back?

The SmugMug publish service is not part of the default installation of Lightroom 4 (but it was in Lightroom 3). If you would like to add it to LR4, visit http://www.adobe.com/cfusion/exchange/index.cfm?event=productHome&exc=25&loc=en_us

Similar Messages

How to add a photo from a collection to a book in Lightroom 4.1?

How to add a photo from a collection to a book in Lightroom 4.1?

Save the book, then go back to Library and add the photos there.

How to add a graphic watermark that is bigger than the photo?

How to add a graphic watermark that is bigger than the photo?
     Basically I want to add a watermark that is a border, like "outside stroke" so that it doesn't clip the photo.
     Upper, left and right side are 10px and on the bottom is my signature that is 40px high. I know how to do this in Photoshop, but can't figgure it out in Lightroom.
     The inset function with negative numbers doesn't work, because it only export to the size of the exported image, instead it should resize the image with those 10px up, left and right and 40px on      the bottom.
My bordes look like this either one of the two can be used, and if you scroll down you will se how the end result should look like.
And below is what it should look like, so that Lightroom doesn't clip the photo.

Are you sure the focus of your piano roll is on the right track? Are you zoomed in/out enough?

How do I get my Lightroom 4 collections back?

I recently upgraded my computer, and dropped the mechanical drive. I had to reload my photo files, from a backup sent me from carbonite. I also upgraded to Lightroom 5. How do I reinstall my lightroom 4 collections which also included the Smugmug plug in?

You need to find a backup of your Lightroom 4 catalog file, and use that (probably by double-clicking on it).

I can't add Smugmug to accounts

My preferences does not have an accounts tab, and in the web tab where I would like to add SmugMug as an account, it is not listed and I can't add it any other way. It only shows Facebook and Flicker. How do I add SmugMug so I can

What is your Aperture version? The "Accounts" tab was introduced by the recent Aperture versions. Are you using an older Aperture?
In Aperture 3.5 the preferences should look like this: SmugMug support is a recently introduced feature and came with Aperture 3.5. If you are not using Aperture 3.5 on Mavericks, you will not be able to use it - your profile signature says MacOS X 10.8.5?

Newbie alert! How to add a watermark

Maybe I just missed this in the manual. I admit to being greener than grass with this sort of software. And as much as I search the 'help' pdf that came with 1.1, I still can't figure this out.
I've created a plate, and the name shows up all nice and pretty when I start Lightroom.
But I can't figure out how to add a watermark to a picture.
Specifically, I'd prefer to add it on import of the RAW file, but I'd settle for being able to add a watermark on the creation of a jpg file.
Currently I take the jpg into photoshop where I have a watermark layer that I apply.
But I'd rather not leave lightroom at all, if possible. That's kinda the point of getting Lightroom.
Any help or guidance that you can give would be greatly appreciated.
tia

Yes, that was the year I was born.
So now I've figured out how to add the meta data. I've even created a metadata template that gets applied when I import. This is a good thing.
When I check the exported jpg files, the extended properties include the copyright information that my template entered. Yet another good thing
however...
There is no watermark on the jpg!
Yes, the "Add copyright watermark" option is checked in the "Image Settings" area of the export. (If I could figure out how to attach the screen print, I'd show you.) And the copyright information shows up in the extended properties of the jpg. But no watermark.
If it is relevant, I am using Vista with Lightroom 1.1
I really did rtfm. And I thought I had it figured out after a bit of hacking. But I was wrong.
Suggestions?

Trouble to buy Add ons for Lightroom over the Adobe page

I´d like to install Add ons for Lightroom. After I signed in with my Adobe ID and got to the chapter Add Ons I can pick a add on I´d like to buy. After that I am on the producer page to sell my own Products. But I´d like to buy one. Do someone know this problem and how to fix it? Thanks
After I klicked the mentioned above button "$10.00" I passed forward to the following page...
This look like the Producer Page!
And now?

Tpov if you are facing difficulties placing your order then please contact our support team directly at Contact Customer Care.

How to add fields to already loaded cube or dso and how to fill records in

how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?

This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382

How to add a library (libSomeRandomlib.so) to a project....??

Ok, so I've been trying to get CERN's ROOT program/libraries to work in an xcode project for a while, but I'm running into one really weird error, and I think I may just not know how to add a library to a project correctly.
Suppose I create a new Xcode C++ command line tool project. I hit Build and go, and it gives me a nice little Hello World! in the console, just as it should. If I then click on the project in Groups & Files, go to Project>Add to Project..., and choose, say, libCint.so, from my root/lib directory, and click ok, then click Build & Go, I get an error in the console:
dyld: Library not loaded: @rpath/libCint.so
Referenced from: /Users/paulthompson/Documents/Programming/Build Products/Debug/LibraryIncludeTest
Reason: image not found
sharedlibrary apply-load-rules all
Data Formatters temporarily unavailable, will re-try after a 'continue'. (Cannot call into the loader at present, it is locked.)
My assumption is that either I'm missing a step in the process of adding a library, or else there is something jacked up with the libraries themselves. Anyone have any advice?
Thanks,
Paul
EDIT* Oh, I should mention that the actuall binary that gets built after adding the library WILL execute properly in the Finder, or from terminal, just not with the Build & Go, or Go commands from within xcode.
Message was edited by: TraxusIV

TraxusIV wrote:
Results of otool:
LibraryIncludeTest:
@rpath/libCint.so (compatibility version 0.0.0, current version 0.0.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 123.0.0)
Macintosh-9:Debug paulthompson$ otool -L /Applications/CERNRoot/root/lib/libCint.so
/Applications/CERNRoot/root/lib/libCint.so:
@rpath/libCint.so (compatibility version 0.0.0, current version 0.0.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.2.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0)
I honestly don't know much about @rpath. I found this page that explains it a bit more: http://blogs.sun.com/dipol/entry/dynamiclibraries_rpath_andmac
So, since I don't want to deploy with the environment variable set, I should ask, what IS the correct, MacOS X way to do it?
The best way to find that is to look at how Apple does it. They put frameworks in /System/Library/Frameworks and regular shared libraries in the standard places. You can do the same. Put your frameworks into /Library/Frameworks and your shared libraries into /usr/local-based paths.
If you want to create stand-alone executables that can be installed via drag-n-drop, you can put shared libraries inside the application bundle. If your shared libraries/frameworks are elsewhere, you will need some sort of installer to get them installed.
I've been sifting through Apple's developer documentation but I have yet to find a concise, straightforward explanation of how to add shared libraries. I'm horribly confused at this point. Is there a good tutorial available anywhere for both the general unix case of linking to dylibs and .so's, and the Mac specific case?
Hopefully someone else knows an answer for this one.
*EDIT* I do already have the variable defined both in ~/.MacOS/environment.plist and also in Xcode as an additional user variable.
I'm not sure about the whole RPATH thing. Setting environment.plist will define environment variables for use in the Finder, but that is really a hack. There are better ways to do it, but if you are porting some open-source programs, that may be the only way. You should be able to define those variables in Xcode. You have to selected the debug executable under "Exectuables"

How to add A single row at the middle of the table in a Webi report

Hi,
I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
Thanks in advance
Regards
Monika

Hi Monika,
It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
Can you explain in more detail what you are trying to do?
Thanks

How to create a job card and how to add waranty card in sales order

I have one scenario for CS.the scenario is realted to automotive industry. Basically its a trading industry of HCV,MCV,LCV apart from that they will do servicing also. First the customer comes for a service.he is having free services. he will have waranty for spare parts of the vehicle. once he comes for servicing first the executive will take complains from the customer after that a Job card will be issued to the customer. there his chasis no ,engine no and registration no will be there. once enter the chasis no entire customer details has to come. how many free services he is having for how many kilo meters.then job card will go to the spare parts dept.that dept will issue the spare parts.then they will invoice the customer. he will pay the payment.and finally the gate pass will be given to the customer to deliver the vehicle.
painful area is how to create a job card and how to add waranty in sales order.
Regards,
Venkat

Hi,
Have u resolved it then Please let me know !!! It is a very interesting problem and owuld like to know the solution...
Regards
Krishna

How to add apache to an exisitng BOXI31 presently running on IIS

Hi Tim,
I know its rude that I directly mailed you but i am not able to post on the SAP forum due to some reasons I don't know. So please if you can help me I would be highly indebted.
I have a multiple server installation.
Number of Servers : 4
Number of CMS : 2
Application tier on 2 servers.
Web tier on 2 servers.
The problem is when i login my .NET infoview works fine but my Java infoview doesn't.
I found the error that the CCM doesn't have Tomcat Apache Server.
So my guess is thats the reason why the java infoview is not working.
Please help how to add the Apache to the CCM.
Regards
Sid

Hi,
You need to run custom installation to install Java Web components on your server box and choose to install
tomcat app server
- Subhodeep

How to add description of a column of a table in SQL Azure

Hi
I have some tables in my application database where there are descriptions added against certain columns. Needless to say they were done by using sp_addextendedproperty.
Now I am trying to migrate the Database to SQL Azure. SQL Azure does not support sp_addextendedproperty.
Hence I am not able to figure out how to add descriptions to those columns.
Any help would be much appreciated.
Thanks
Soumyadeb

Hello,
Just as Latheesh post above, Windows Azure SQL database are not support extended stored procedures. That’s one of the limitations on SQL database, and I don’t know there is another way to achieve the same on Azure.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

How to add more fields at level task for importing to MsProject

Hi everyone,
We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need.
The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available fields and then we don't find the same amount for importing (34). So, in some cases we don't find fields which were configurated for exporting and it is no posible to upload the information back because the field is no available for importing.
Does anyone knows how to add more fields for importing at the cProjects side?
Thanks a lot,
CAMILO URIBE

Some fields can not be migrated because of MsProject designe. The above is the reason why cProjects' customizing does not offer the
mapping of the same nuember of fields.

How to ADD field in iview ?

hi,
in portal-iview i want to add a field.
when i go to 'portal-content -> open the iview with right click -> preview' and then
do ctrl-alt-right-mouse click i got to the customizing of the fields.
i know how to HIDE fields there, but i don't know how to add fields ? in the list
of the fields the necessary fields are available, BUT i only have to options:
hide -> YES or NOT PERSONALIZED
any ideas ?
reg, Martin

Gopal,
the root element of this fields does NOT have the option 'decorate'.
it is the quoata overview of ESS : sap.com/ess~quotas
the top of the tree has option 'decorate', but this is above the necessary table where
i select the data.
my adrl is
martin.svik(at)denzel.at
maybe we can 'change' some screenshots where you can send me yours and i can
send you mine to explain it in a better way
reg, Martin

How to add smugmug to lightroom

Similar Messages

Maybe you are looking for