How to add sound to buttons in Xcode 5.0.1?

hello
i am wanting to know how to add sound to a button in xcode 5?
its mover 200 sounds of like 1 sec.
i am using storyboards
i need it ASAP please tell me
thanks alot

That's the wrong file path. You want to go to the artwork and effects palette, find the layer styles section, and choose your style there.

Similar Messages

  • How to add a custom button in WD screen to call a workflow in siebel?

    Hi All,
    We have a requirement to have a custom button at the summary screen(after the rule execution) "Create Opportunity", on clicking on it a new opportunity record should be created in Siebel. As we know the "Save" link calls "PolicyAutomationSaveSession" inbound web service method and saves the information in session table and we can modify the PreSession and PostSession workflows. But we are not sure how it calls the service method and where is the mapping defined.
    Can you please help me on how to add a custom button and how to invoke a workflow in siebel side to implement this requirement?
    Also is there any document which can help me to add a custom button in screen and to add the code behind the button?
    Thanks in advance!!
    Regards,
    Subhradeep

    Subhradeep,
    Closing a Web Determinations window is essentially the same as closing any HTML window. It involves javascript, which you would have to add to the Web Determinations templates.
    Essentially the javascript command to close a window is {{window.close}} or {{top.close}}
    For timing, you might be able to use the setTimeout function of Javascript (see: http://www.w3schools.com/jsref/met_win_settimeout.asp)
    At the risk of exposing exactly how bad my javascript skills are, I have attached a super-simple html fragment, a page that closes itself after 3 seconds. It may help you get started in the right direction. In general closing a window is a fairly dubious activity and is often not permitted by certain browsers. This html page at least works in Internet Explorer.
    <html>
         <head>
         <script language="JavaScript">
              setTimeout(closeMe, 3000);
              function closeMe() {
                   alert("This window will close");
                   top.close();
         </script>
         </head>
         <body><B>This window will close in three seconds</B></body>
    </html>
    {code}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • How to add the REFRESH button in OOPs ALV grid

    how to add the REFRESH button in OOPs ALV grid

    Hi Naidu.
    Check the below code:
    Local Class Definition and implementation For events handeling
    CLASS LCL_EVENT DEFINITION .
      PUBLIC SECTION.
        METHODS :TOOLBAR FOR EVENT TOOLBAR OF  CL_GUI_ALV_GRID
                         IMPORTING E_OBJECT,
                 USER_COMMAND FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
                         IMPORTING E_UCOMM.
    ENDCLASS.    
    CLASS LCL_EVENT IMPLEMENTATION.
      METHOD TOOLBAR.
        WA_TOOL-FUNCTION = 'ZFC1'.
        WA_TOOL-TEXT     = 'TEST'.
        WA_TOOL-ICON     = '@EA@'.
        APPEND WA_TOOL TO E_OBJECT->MT_TOOLBAR.
      ENDMETHOD.             "DISPLAY
      METHOD USER_COMMAND.
        IF E_UCOMM = 'ZFC1'.
              ENDIF.
      ENDMETHOD.                    "USER_COMMAND
    ENDCLASS.                    "LCL_EVENT IMPLEMENTATION
    MODULE STATUS_0200 OUTPUT.
      SET PF-STATUS 'ZALV_BTON'.
      SELECT * FROM VBAK INTO TABLE GT_VBAK
               UP TO 30 ROWS.
    **** CREATE CONTAINER OBJECT
      CREATE OBJECT MY_CONTAINER
        EXPORTING
          CONTAINER_NAME              = 'CC1'
         EXCEPTIONS
          CNTL_ERROR                  = 1
          CNTL_SYSTEM_ERROR           = 2
          CREATE_ERROR                = 3
          LIFETIME_ERROR              = 4
          LIFETIME_DYNPRO_DYNPRO_LINK = 5
          OTHERS                      = 6 .
    ****** GRID TO CONTAINER
      CREATE OBJECT ALV
          EXPORTING
          I_PARENT          = MY_CONTAINER
         EXCEPTIONS
          ERROR_CNTL_CREATE = 1
          ERROR_CNTL_INIT   = 2
          ERROR_CNTL_LINK   = 3
          ERROR_DP_CREATE   = 4
          OTHERS            = 5.
      CREATE OBJECT OBJ.
      SET HANDLER : OBJ->TOOLBAR FOR ALV.
      SET HANDLER : OBJ->USER_COMMAND FOR ALV.
    ****** ALV DISPLAY
      CALL METHOD ALV->SET_TABLE_FOR_FIRST_DISPLAY
        EXPORTING
          I_STRUCTURE_NAME              = 'VBAK'
        CHANGING
          IT_OUTTAB                     = GT_VBAK[]
        EXCEPTIONS
          INVALID_PARAMETER_COMBINATION = 1
          PROGRAM_ERROR                 = 2
          TOO_MANY_LINES                = 3
          OTHERS                        = 4.
    ENDMODULE.                 " STATUS_0200  OUTPUT
    *&      Module  USER_COMMAND_0200  INPUT
    *       text
    MODULE USER_COMMAND_0200 INPUT.
      IF SY-UCOMM EQ 'BACK'.
        LEAVE PROGRAM.
      ENDIF.
    ENDMODULE.                 " USER_COMMAND_0200  INPUT
    Regards
    Kumar M

  • How to add a link button in system form?

    how to add a link button in system form in the edit text?

    HI
    see the following code
    This creates an item "55" caption, and exittext ("550") and creates linked button "51" linked to "550"
            oItem = otmpform.Items.Add("55", SAPbouiCOM.BoFormItemTypes.it_STATIC)
            With oItem
                .Top = 315 + 30 + 15
                .Left = 12
                .Width = 100
                .Specific.Caption = "Többlet"
            End With
            otmpform.DataSources.UserDataSources.Add("550", SAPbouiCOM.BoDataType.dt_SHORT_TEXT)
            oItem = otmpform.Items.Add("550", SAPbouiCOM.BoFormItemTypes.it_EDIT)
            With oItem
                .Top = 315 + 30 + 15
                .Left = 120
                .Width = 100
                .Specific.DataBind.SetBound(True, "", "550")
                .AffectsFormMode = True
                .Description = otmpform.Items.Item("55").Specific.Caption
                .DisplayDesc = True
            End With
            oItem = otmpform.Items.Add("551", SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON)
            With oItem
                .Top = 316 + 30 + 15
                .Left = 120 - 14
                .Width = 13
                .LinkTo = "550"
                .Specific.LinkedObject = SAPbouiCOM.BoLinkedObject.lf_GLAccounts
            End With
    Regards,
    J.

  • How to add a push button on an ALV grid  ?

    Hi,
    How to add a push button on an ALV grid, using ON_TOOLBAR, ON_USERCOMMAND Methods. Clicking on that push button, a new screen has to be displayed.

    Hi,
            Assuming that you want to have a "push-button" column, i.e. push-buttons within an ALV grid then you need to implement the following steps:
    (1) Set the style of the column as button
      ls_fcat-style = CL_GUI_ALV_GRID => MC_STYLE_BUTTON.
    (2) When the user pushes the button event BUTTON_CLICK is triggered. Thus, define an appropriate event handler method.
    <b>Reward points</b>
    Regards

  • How to Add C3PO Toolbar Buttons with GroupWise in C#

    Hello
    i try How to Add C3PO Toolbar Buttons with GroupWise in C#. I do all like
    i read here
    http://support.novell.com/techcenter...a20000906.html
    But i can see any result
    i create file with Wizard(witout project)
    Then i add this file to my EXE project
    and add 2 button "Reg C3PO"(RegC3po();) and "Unreg C3PO"(UnRegC3po();)
    and init
    what i do wrong?
    i try find ansver but find only this
    http://newsportal.novell.com/article...sup.gwc3po#925
    what its mean?
    news:SR%Zg.16416$[email protected]:
    about this question
    http://newsportal.novell.com/article...sup.gwc3po#673
    C3POs still don't work in the address book?
    Kirill

    Kirill wrote:
    > Hello and Merry Chritmas :)
    >
    > regsvr32 onlu for DLL. My project create EXE file :(
    >
    > Kirill
    Ups......
    You'll, according to the readme generated by your C3PO Wizard, have to run
    Regasm.exe <your C3PO server>
    That will create the needed regkeys...
    Also, you might have to add the typelib wrapper and assambly to the GAC, bu typing:
    Gacutil -i <your C3PO server>
    Best Regards
    Tommy Mikkelsen
    IT Quality A/S
    Denmark
    Novell Developer Forums SYSOP
    Please Report back any success or failure, That way we all learn
    Sorry, but no support through email
    "I hate bugs".......Tommy Lee Jones, MIB
    Be a GroupWiseR, go http://www.groupwiser.net

  • How to add sounds to Garageband on the ipad2?

    I was wondering how to add sound libraries to the ipad2. I am looking to use the ipad2 as a sound module so when I plug it up to my keyboard I can play any sound I want. I got the idea from a Jamal Hartwell Video.
    http://www.youtube.com/watch?v=iICtztPXqZA
    Starling
    http://www.StarlingJonesJr.com

    Tap on the Spanner icon, tap on Share and Print, Tap on Print.
    You will also need to have an Air-Print enabled printer and both the printer and ipad must be connected to the same network.  If your printer isn`t Air-Print enabled then there is a work-a-round but you will have to use google to obtain the files and instructions, do a search on google for Air-Print for PC or Air-Print for Mac.
    To save a document in Pages for iPad just tap on Documents to take you back to your list of documents and the one you are currently working on will automatically save, you can then tap on the documents name to change it.

  • How to add a close button to a edge animation ?

    How to add a close button to a edge animation ?

    Welcome to our community, Laurie
    You posted this in the FlashHelp section. Is that your actual
    output type? If so, you will need to make edits to the FlashHelp
    using Adobe Flash.
    Cheers... Rick

  • How to add sound to a button in storyboards on xcode Version 4.6.2 (4H1003)?

    i am running xCode Version 4.6.2 (4H1003) on my macbook air with mountain lion.
    i am trying to add sound to a button that is in the scroll view but i cant?
    PLEASE I NEED HELP ASAP!!!

    Have you looked in the Attribute Inspector got the button? You can attach simple sounds to the button there,
    If you need more look at NSSound Class

  • How to add sound in each slide of powerpoint 2013

    Hi,
    I want to add sound in each slide of my powerpoint presentations in 2013.Please let us know how to do these things.
    Regards
    Pradeep

    Hi Pradeep,
    I would like to confirm that how exactly you want PowerPoint 2013 to play a sound. For example, add sound to your PowerPoint slide transitions, add background music, or play a sound during an Animation.
    To play a sound during a transition, go to the Transitions tab on the ribbon, apply a transition, then click the drop-down for
    Sound, and choose one from the list.
    To add audio in the background, you can go to the Insert tab on the ribbon and click the
    Audio button, choosing Online Audio... to search a clip media on Office.com or select a sound from your computer by selecting
    Audio on My PC...
    To add sound effects to an animation, you can refer to this article:https://support.office.com/en-us/article/Add-sound-effects-to-an-animation-7d0e2d70-caca-495e-a738-a8257474605e
    Hope it helps.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • How to add a new button in IC tool bar and handle the event for the button?

    Hi,
        I am working on CRM 2007 Interaction center. To add a new button to IC toolbar, customizing is available to define a new button and then assign in to the profile.
    In SPRO->CRM->IC webclient->Customer Specifc System Modifications->Define Toolbar Buttons, I defined one new button with ID ZSTART.
    Now in SPRO->CRM->IC webclient->Basic Functions->Communication Channels->Define Toolbar Profiles , I selected Default profileid and in Generic Layout Buttons Tab, I added the new button ZSTART in Position 3.
         So after completing the customizing when the user logs in using role IC_AGENT,  the button (with ID:ZSTART) gets displayed in the IC toolbar too.
          Now on click of this button, I need to create an object.
    To do so, I have to catch the event which is raised by this new button.
           Please let me how to implement the event handler for this new button. What will be the event name for this button click event and how I can subscribe for it ?
         Please let me know if anyone of you have already worked on similar requirements.
    Regards,
    Manas.
    Edited by: manas sahoo on Jul 22, 2008 7:49 PM

    Hello Manas,
    There are a couple of threads in the community that might help you out (if you haven't already found them):
    Re: IC Web Client Toolbar
    /message/3621917#3621917 [original link is broken]
    Regards,
    Renee Wilhelm
    Edited by: Renee Wilhelm on Nov 6, 2008 7:46 PM

  • How to add a Font Button in the Top of the Help File

    Dear all,
    In some of the Help Files (HTML Help), i've seen a Font
    button being added in the top of the Help File (for e.g next to
    Home button)...when we click this font button, the font size of the
    Content present in the Help File Increases/decreases
    accordingly....how to add this button in our Help File.
    At present i'm creating a HTML Help using Adobe 6..Kindly let
    me know, if there are any options...
    Thanks with regards

    Hi usureka
    Take a look at the following link. It should guide you.
    click
    here
    Cheers... Rick

  • How to add a push button in ALV Grid Top-of-page

    Is it possible to add a push button to the top-of-page in Alv grid display?if yes, then how? I am not using OO ABAP and am using reuse_alv_grid_display with top-of-page event.

    Hi,
    I am not sure whether we can add push button in top-of -page or not. But instead of that if you want to add button on toolbar as per your requirement then follow below link. it will useful.
    http://www.sap-img.com/abap/example-of-a-simple-alv-grid-report.htm
    Ram.

  • How to add the push button on the apllication tollbar of IL02 tcode

    Hi Friends,
    I have to add the push button on the application tool bar of the IL02.when that push button is pressed then some operation to be performed.Could you please suggest how to add.Is there any screen exit if yes what is that.
    With out screen exits if there is any way ?
    Thanks and regards,
    shyla

    HI Vicky ,
                      if u want an interactive ALV report , there are lot of forums already having the solution for that , but let me give u the solution anyway.
    In the function module "REUSE_ALV_GRID_DISPLAY" , import parameters
         I_CALLBACK_PF_STATUS_SET          = 'FLIGHT'
         I_CALLBACK_USER_COMMAND           = 'BUTTON_CLICK'
    has to be supplied to this function module . The PF status is where u hav created the two buttons , that PF status has to be given here .If the user clicks on the button then it is handled by the form routines . Inside the sub-routine based on the button the user has selected u could perform the action.
    FORM FLIGHT    USING RT_EXTAB TYPE SLIS_T_EXTAB.
      SET PF-STATUS 'FLIGHT' EXCLUDING RT_EXTAB.
    ENDFORM.
    Here the "Flight" is the PF_status .
    FORM BUTTON_CLICK USING UCOMM type SY-UCOMM
                           SELFIELD type SLIS_SELFIELD.
      CASE UCOMM.
        WHEN 'BUTTON!' .
    write ur code for button 1.
      WHEN "BUTTON"
      *Write ur code for button2 .
    end case.
    endform.
    for any queries reply back.
    regards

  • How to add "child data" button in Personal information

    Hi guys , I m a portal consultant , we are EHP4 portal and ECC 6 in R/3...
    In personal Information > Family members/Dependents> there is no Add child tab is there to enter the details of the children...... how to add this??
    please help me .......

    Hi sidhu
    have check the tab called "new child" button there you can create the children s
    OR check the country specific iview
    Go to content admin> content provided by sap>end user >EH3> iview -->check the specific iview
    Hope this is help to you.
    Thanks& Regards
    G.srinu
    Edited by: gorlisrinu on Nov 10, 2011 10:29 AM

Maybe you are looking for