How to add spaces in outline after each heading

I like to use outlines a lot. However, I noticed that everytime I press enter to start a new line, the cursor is placed immediately after the header. I'm used to there at least being one space put in by default when I press enter.
Is there a way to add these auto spaces into my outline format?
Example:
I want:
I. New topic
not
I.New Topic

Use the style Numbered list from the style drawer. It adds a space between the number and the paragraph line

Similar Messages

How to Add a Physical Interface After Installation in Solaris 10

How to Add a Physical Interface After Installation in Solaris 10
Hi Java Specialist,
I am trying to setup a network interface with the following steps on a new fresh Solaris 10 installation using the instruction titled How to Add a Physical Interface After Installation in Solaris 10 3/05 ONLY from http://docs.oracle.com/cd/E19253-01/816-4554/esxhb/index.html:
1. # ifconfig lo0 plumb up
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment prior to installing Solaris
10 on top of it.
3. # Added saturn to /etc/hostname.lo0.
4. # Added 10.56.8.101 to /etc/inet/hosts
5. # Added 10.56.0.0 255.255.240.0 to /etc/inet/netmasks
6.# reboot
However, the following errors kept recurring:
svcs –xv …. unable to qualify my own domain name,
failed with exit status 69.
Any idea on what other steps have I missed? I was hoping to only do step 3 – 6 for the change to apply permanently.
Many thanks,
Jack

Hi Java Specialist,... in a Solaris forum?
1. # ifconfig lo0 plumb upThe loopback connection (your lo0)is NOT a physical interface. There are no hardware components for it. Nor can I think of any reason why it should ever be anything other than the default 127.0.0.1
Use your favorite Internet search site (such as Google, Bing, Yahoo) to learn more about it.
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment ...I have no idea how a nonexistent software construct gets a DHCP address in a MS Operating System, unless you are confusing this with the "Microsoft Loopback Adapter" which is an utterly different concept. Again, go see what Google tells you.
<br>
<br>
<br>
... completely unrelated to configuring an IP...
unable to qualify my own domain nameAgain, search the Internet or even search these forums with that string of words.
Go back through your two most recent posts and read the responses again.
They seem to both be on the same topic as this new one -- configuring an IP on something.
How to initialize new IP address on secondary interface permanently
How to change IP address permanently on Solaris 10
When you've done all that, then come back and tell us what you are actually trying to do.

In CS6, why the file size remains same after croping? And how do I reduce the size after each cropin

In CS6, why the file size remains same after croping? And how do I reduce the size after each croping? Thx

Select the Crop Tool and check the box [ ] Delete Cropped Pixels and you should see a reduction in file size. With the box unchecked, the data is still maintained in the document, you just can't see it.
-Noel

How to add date with month after convert number to month?

How to add date with month after convert number to month?
Month Date Result
24 21/11/09 24*(21/11/09)
I want to add both the column and result should be 21/11/11
Thanks
Nihar

Hmm,
Because, you are using YYYY for '09'.
SQL> ed
Wrote file afiedt.buf
1* select to_char(to_date('10/01/09','DD/MM/RRRR'),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(TO
10/01/2009
SQL> ed
Wrote file afiedt.buf
1* select to_char(to_date('10/01/09','DD/MM/YYYY'),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(TO
10/01/0009Or with Add_months
SQL> ed
Wrote file afiedt.buf
1* select to_char(add_months(to_date('10/01/09','DD/MM/YYYY'),36),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(AD
10/01/0012
SQL> ed
Wrote file afiedt.buf
1* select to_char(add_months(to_date('10/01/09','DD/MM/RRRR'),36),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(AD
10/01/2012-Arun

How to add more comments in the Nomination Header notes tab

Short Text
How to add more comments in the Nomination Header notes tab
In the nomination screen, there are the tabs for header and item notes.
Within each of those tabs, there are categories for the type ofcomments. Currently in the nomination maintenance screen header notes
there are onlythree comment categories are available 1) General comments 2) Carriercoment 3) Shipper Comment and We would like add more comments in this
section. In the configuration we couldn't find a place where we can add
more customer specific comments. Can we add comments in the header
notes tab and if so where can we add the additional comments ?

Hello Giri,
You could try the following to create new text types for nomination header.
1) Execute transaction SM31
2) The view here is V_TTXIDI
3) Click on maintain .
4) Create new entries .
5) Since you want to add new more comments in the nomination header enter the text object as OIJRCODE_H
6) Enter a text ID starting with Z
7) Enter a description and save the new entry.
In case you want to add new comments at the item level use the text object as OIJRCODE_I.
When you restart the transaction O4NM again you will see the new entry added.
This will solve the issue.
Regards,
Sandil

How to add user defined tab in the Header level of T-Code O4NM?

How to add user defined tab in the Header level of T-Code O4NM?
I tried with BADI but I cant able to find any BADI for it and also searched for screen exit too..

Can you check the user exits,
OIJNOM_N and OIJTKT_N
Cheers,
Balaji

How to add spaces at the end of record

Hi Friends,
i am creating a file which contains more than 100 records.
In ABAP i have internal table with on field(135) type c.
some time record have length 120, somtime 130 its vary on each record.
but i would like to add space at the end of each record till 135 length.
Can you please help me how to add speace at the end of record.
regards
Malik

So why did you said that in your first posting? My glass sphere is out for cleaning...
Instead of type c use strings and add spaces until they have the appropriate length.
loop at outtab assigning <pout>.
while strlen( <pout>-val ) < 135.
concatenate <pout>-val `` into <pout>-val.
endwhile.
endloop.

How to add space between two tabs in accodion widget?

Hi! I am using the accordion widgets and trying to add space between each of the tabs, would someone help me on this. Thanks

Directly editing the output of Muse is virtually always a bad idea. At a minimum it will create a very cumbersome workflow since Muse will overwrite your changes every time you re-export (export, upload, publish, preview).
It depends on exactly what visual effect you want to achieve, but you probably just need to select the accordion widget and use the Spacing panel to adjust the vertical gutter value.

How to add af:inputFile dynamically within each row of table?

I need to add af:inputfile dynamically within each row of af:table, when the user hits a commandlink at the bottom of each row.
I have tried wrapping af:inputfile with af:foreach:
<af:table value="Bean.rows" var="row">
<af:column>
<af:forEach step="1" begin="1"
end="#{Bean.filecount}">
<af:inputFile label="Please upload a file"
id="1"
valueChangeListener="#{Bean.onClickUpload}"/>
</af:forEach>
<af:commandLink text="Add more file" id="cl3" actionListener="#{Bean.onAddFile}"/>
</af:column>
</af:table>
in Bean.onAddFile, I have:
public void onAddFile(ActionEvent event){
filecount++;
It works but there's no independent control of each row. When I click one commandlink, All rows now have 2,3,.... af:inputFile. The change affects all rows.
The requirement should be that when I click one commandlink in a row, only that row shows additional af:inputFile.
So why not leverage the row variable of the table, right? That's what I did, I changed the end attribute of foreach to the following:
<af:forEach step="1" begin="1"
end="#{row.fileRowCount}">
the backing bean method changed to the following:
public void onAddFile(ActionEvent event){
int filerowcount = (Integer)JsfUtil.resolveExpression("#{row.fileRowCount}");
Integer newcount = filerowcount+1;
JsfUtil.setExpressionValue("#{row.fileRowCount}", newcount.toString());
Note that "row" refers to an object that has a int field called "filerowcount". And the initial value is "1".
Just for testing, I also added <af:outputText value="row.filerowcount"/>, to see if the count is what I expected it to be.
I didn't see the any af:inputfile this time, but the outtext is showing the filerowcount properly. When I click the commandlink, the number changed to 2,3,..... Also in the backing bean newcount and filerowcount is incrementing correctly.
I know the begin, end attribute means the index of a for loop. So I changed begin="0", it now shows one row of af:inputfile, but when I click the commandlink, no additional rows are shown. (Although the outputtext of filerowcount keeps incrementing as expected.
So to sum up, the END attribute of af:foreach row CAN pick up the value from the backing bean and render af:inputfile dynamically, but it CANNOT pick up the value from the the field in VAR object of a table.
Is is a known issue? Or I did something by mistake.
Is there any other way to add af:inputFile dynamically within each row of table?
Any advice/comment is appreciated.

Hi,
here is how it goes:
- add an af:inputFile to the column and set its rendered property to point to a managed bean property. The managed bean property has a default value of "false" and the bean should be in viewScope
- create another variable that holds the row number that should show the inputFile component. This is updated by the command link and evaluated by the get method of the managed bean property controlling the inputFile visibility
- Define a property name for the table varStatus property
- For the command link, define a attribute f:attribute with the name rowNumber and set its value to #{varStatusPropertyName.index}
- define an action listener for the command link
public void showInputFile(ActionEvent actionEvent){
int rowNumber = ((RichCommandLink) actionEvent.getSource()).getAttributes().get("varStatusPropertyName");
//set the value on the internal variable
- In the getter of the property that defines the render value of the inputFile, use code like this
public boolean get<whatever name you use>(){
//access the following EL from Java #{varStatusPropertyName.index}
int currentRenderedRow = <EL result here>;
// compare the current row index with the one set by the command link, which is stored in the variable of the managed bean
if true return true
else return false
- Set the PartialTriggers property of the table to point to the commandLink ID so the table is repainted when the command link is pressed
This should then render the fileInput component for a single row (the one you clicked the command link in)
Frank

Using a Macro to add a Carriage Return after each data entry within all cells of an imported range of cells

I have a macro that copies data from a Target workbook then pastes the data into a destination workbook. I then wish to use lookups in the destination workbook to view specific data from the pasted range of data on a separate sheet.
The problem is, the cells that contain numbers from the pasted data have the green dogeared error flags associated with the cell. The only way I can make a lookup function work, is to go to each cell and manually enter a carriage return after each entry.
The code for the macro is given below. What can be done so that the pasted data contains no errors associated with the number cells? Or can a second macro be written to clean the data. If so can you help me out? Thanks in advance.
Kindest Regards
Sub ImportData()
' ImportData Macro allows user to select an Excel workbook (i.e. Orchestrate Excel Output),
' then copy & paste it into the MediaSpreadsheet.
    Dim wbk As Workbook
    Set wbk = Application.Run("MediaSpreadsheet_1.0.xlsm!OpenFile")
    If wbk Is Nothing Then
        Beep
        Exit Sub
    End If
    Set wbk = ActiveWorkbook
    Range("A9:S116").Copy
    Workbooks("MediaSpreadsheet_1.0.xlsm").Activate
    Sheets("OrchestrateData").Select
    Range("A1").Select
    ActiveSheet.Paste
    With Selection.Font
        .ColorIndex = xlAutomatic
        .TintAndShade = 0
    End With
    With Selection.Interior
        .Pattern = xlNone
        .TintAndShade = 0
        .PatternTintAndShade = 0
    End With
    Selection.Borders(xlDiagonalDown).LineStyle = xlNone
    Selection.Borders(xlDiagonalUp).LineStyle = xlNone
    Selection.Borders(xlEdgeLeft).LineStyle = xlNone
    Selection.Borders(xlEdgeTop).LineStyle = xlNone
    Selection.Borders(xlEdgeBottom).LineStyle = xlNone
    Selection.Borders(xlEdgeRight).LineStyle = xlNone
    Selection.Borders(xlInsideVertical).LineStyle = xlNone
    Selection.Borders(xlInsideHorizontal).LineStyle = xlNone
    wbk.Close
    Sheets("MediaSchedule").Select
End Sub
DAPulliam64

Hi DAPAugust64,
The green "dogeared error flags" of the cells means that you paste numbers in these cells, but they're formated as Text.
So you need to change the cells back to the correct format so that the lookup function works fine. You can simply call this method after pasting:
ActiveSheet.Cells(1, 1).NumberFormat = "General"
ActiveSheet.Cells(1, 1) = ActiveSheet.Cells(1, 1).Text
Or use PasteSpecial method to paste the numbers as well as it's format:
https://msdn.microsoft.com/en-us/library/office/ff837425.aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to add Oracle Partition Component after the RDBMS Installation

Hi,
I have been installed Oracle 11g R2 in Suse Linux 10 (64 bit), while in installation i deselect the Partition option. Now i need to bring the Oracle Partition option to my Oracle RDBMS.
Please help me how to bring the Partition Option once again into my Oracle Server.
Thanks in Advance,
Baalaji V

Same senario i have here, But i want to know how to install the Partition option after the RDBMS installation.
Since i have been installed the Oracle 11g R2 Ent Edition without Partition option, Now i need to install the same.
Thanks.

Pages 5.2.2 - how to add a logo in the page header

Hi, how can I add a logo in the page header of each page?!
seems header and footer only supports text and automated page numbering only...
I need some advise on this one
thanks

Add an image to any page in the section, then drag it where you want it to appear on each page.
Reduce the opacity using the slider in the Style pane of the Format inspector to change the object’s transparency.
Choose Arrange > Section Masters > Move Object to Section Master (from the Arrange menu at the top of your computer screen).

How to add 2 more field to the Header of FBL5N ALV report output

Hi All,
I have copied and made some modification to the standard transaction FBL5N and added some fields to the ALV report line Items but how to add fields to the header part i.e if you execute the transaction FBL5n, you will get the ALV report, in the header part customer no, company code then I need to add the 2 more fields. can any one tell me that which structure or where I need to add these fields to be appear in ALV output screen.
Thanks in advance.
Swapna.

Hi Mohamed,
If you copied Z-FM successfully, then you have to go to subroutine TOP_OF_PAGE to add your field:
*&      Form TOP_OF_PAGE
FORM top_of_page.
DATA: b_suppress   LIKE boole-boole,
        opfi_text    LIKE eptext OCCURS 10 WITH HEADER LINE,
        n_color      TYPE i.
* IF     NOT it_items-bukrs IS INITIAL               "737295
*     AND NOT it_items-konto IS INITIAL               "737295
*     AND NOT it_items-koart IS INITIAL.              "737295
gs_items = gt_alv.
* ENDIF.                                             "737295
* skip first call at top of page:
IF NOT gd_first_top IS INITIAL.
    CLEAR gd_first_top.
    EXIT.
ENDIF.
IF x_grid = c_x OR x_inet = c_x.                          "1012201
    PERFORM grid_top_of_page.
    EXIT.
ENDIF.
*... open FI: get header text.
* first fill some RFXPO fields for general info:
CLEAR: s_rfxpo, wa_kna1, wa_lfa1, wa_ska1.
s_rfxpo-bukrs = gs_items-bukrs.
s_rfxpo-kkber = gs_items-kkber.
s_rfxpo-koart = gs_items-koart.
s_rfxpo-konto = gs_items-konto.
s_rfxpo-vrbez = gs_variant-variant.
s_rfxpo-waers = gs_items-waers.
* update master record:
PERFORM fill_master_rec USING gs_items-koart
                                 gs_items-konto
                                 gs_items-bukrs. " note 698396
CALL FUNCTION 'OPEN_FI_PERFORM_00001640_E'
    EXPORTING
      i_rfxpo             = s_rfxpo
      i_kna1              = wa_kna1
      i_lfa1              = wa_lfa1
      i_ska1              = wa_ska1
    IMPORTING
      e_suppress_standard = b_suppress
    TABLES
      t_lines             = opfi_text.
*... display open FI text:
IF x_konto_sort = 'X'.
    LOOP AT opfi_text.
      CASE opfi_text-color.
        WHEN 1.
          FORMAT COLOR 1.
        WHEN 2.
          FORMAT COLOR 2.
        WHEN 3.
          FORMAT COLOR 3.
        WHEN 4.
          FORMAT COLOR 4.
        WHEN 5.
          FORMAT COLOR 5.
        WHEN 6.
          FORMAT COLOR 6.
        WHEN 7.
          FORMAT COLOR 7.
      ENDCASE.
      WRITE: / opfi_text-text.
    ENDLOOP.
    FORMAT RESET.
ENDIF.
*... display other header text:
IF b_suppress NE 'X'.
    PERFORM display_custom_header.
    PERFORM display_ccard_lines.
ENDIF.
" Put your field somewhere...
ENDFORM.                               " TOP_OF_PAGE
Good luck,
Thanks,

How to add Custom Attributes in the SOAP header for OWSM

Hi,
I like to know how to add the Custom Attributes in the SOAP header for OSWM username token authentication.
Currently we are getting the header element like
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
here we need to add the attribute "soap:mustUnderstand="1" , so the element will look like
<wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
Any info on this will be helpful.
Thanks,
ArunM

Hi Jay, you can make it in more than 1 way.
I suggest you the following:
- create an URL iview that points to any URL you want.
- define a Resource that points to the iview (with a window name, to open in new window)
- define an Area that points to the resource
- add your new Area to the your current Area Group
Regards!

Why is a space always added after each img ?

Hello,
I have an input TextField, in which I want to add text and images. But each time I add a new image in the textField (via an <img> tag), a space character is added after every other <img> in the TextField. Why is that ?
You can test it for yourself :
function test():void
            var tf:TextField = new TextField();
            tf.multiline = true;
            tf.text = "Hello World";
            trace("1/ tf.length", tf.length);
            trace("1/ tf.text", tf.text);
            trace("1/ tf.text.length", tf.text.length);
            trace("1/ tf.htmlText", tf.htmlText);
            trace("1/ tf.htmlText.length", tf.htmlText.length);
            var htmlText:String = tf.htmlText;
            htmlText += "<img src='image.gif' id='0'/>";
            tf.htmlText = htmlText;
            trace("2/ tf.length", tf.length);
            trace("2/ tf.text", tf.text);
            trace("2/ tf.text.length", tf.text.length);
            trace("2/ tf.htmlText", tf.htmlText);
            trace("2/ tf.htmlText.length", tf.htmlText.length);
            htmlText = tf.htmlText;
            htmlText += "<img src='image.gif' id='1'/>";
            tf.htmlText = htmlText;
            trace("3/ tf.length", tf.length);
            trace("3/ tf.text", tf.text);
            trace("3/ tf.text.length", tf.text.length);
            trace("3/ tf.htmlText", tf.htmlText);
            trace("3/ tf.htmlText.length", tf.htmlText.length);
Before the first image, the text equals "Hello World" (as expected)
Before the second image, the text is "Hello World\r "
And after the second image, it is "Hello World\r \r "
So there are two spaces after the first image. And if you add a few images in the initial htmlText, they will have two more spaces at the end of the function.
Does anybody knows why is it, how to disable this behavior, or simply fix it ?
A big thanks to the one who can help me, I'm really stuck with this.

http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/text/TextField.ht ml#condenseWhite

How to add spaces in outline after each heading

Similar Messages

Maybe you are looking for