How to add Spare material to Existing Asset Material.

Hello Gurus,
I have a Problem that I made a Asset code of One material, Later On one spare of that
Asset material is Damage. i replace it with new one,
But what i do with new one spare?
Wheater i make new Asset code for it. and if yes then How i link the cost of it to Existing Asset code.
For Example,
I made a Asset code of Computer as
Main Number subnumber
100000 11
Now i replace a Hard disk of Computer to New one. so what I do with New Hard disk,
Wheater I Make new Asset code for it And if yes then How i link the cost of it to Existing Compuet asset code.
I am eagerly waiting your reply.
Regard,
Riten Patel

Hi,
MMAM is the Transaction.
Regards,
Satish

Similar Messages

How to add blank page to existing Document In Adobe Dc

how to add blank page to existing Document In Adobe Dc Pro

Hi thashrifs16749461,
You can add a blank page using Adobe Acrobat DC by following the below instructions :-
1) Open your existing pdf document in Acrobat DC.
2) Choose the 'Organize Page' option form the Tools pane on the right as shown below in the screen shoot.
3) Now at the top you will see all the tools to Organize the page, Click on 'Insert' & select 'Blank Page' from the drop-down to insert blank pages.
*Shortcut : If you are using windows computer you can use ' Shift+Ctrl+T ' key to insert blank pages.
In case if you experience any issue or have any query please let us know. We will be happy to help you.
Regards,
Aadesh

How to add one column in existing search help.

Hi Folks,
My quesion is
How to add one column in existing search help and also Now search help on that field is not an explicit search help. It should be implement using check table.
Shivam

Hi,
If you want to add a field in Elementary search help, get the search help name for the and go to change mode and add the field in it.
If you want to add a field in collective search help, go to included search helps tab and a new search help name and add the fields to it.
I think this should help you to certain extent.
Regards,
Kranthi
Edited by: Kranthi on Jan 14, 2010 11:15 AM

Add new depreciation to existing assets

hi experts
can we add new depreciation to existing assets , while creating new assets i can see the depreciation that i have created recently. but for the existing assets i want to add this new depreciation.
venkat

Hi
Yes u can change the depreication
but keep in mind note the date when u chnage the depreciation of existing asset
and check any invoice not pending of asset PO at the time of change the depreciation
Suppose u create a PO with asset, whc\ich is creatd ( suppose machinary rate is 10%)
then u comlete the cycle first this means invoce entry ( MIRO)
then u chnage the depreciation
if any query revert back
Regards
Roobal

REG: How to add new fields to existing Infospoke

Hi All,
We have an existing Infospoke, It has ODS as a Source and some fields are being pulled.
But here is the scenario....
I need some extra fields that are available in other ODS. How to add that fields ?
By some research came to know that.. I need to lookup on the ODS and populate into existing Infospoke.How to add these fields to InfoSpoke using BAdi implementaion.
Note: already BAdi is active in the infospoke.
Please help me in this regard

Hi Chase,
As you mentioned that BADI is already implemented then I guess you should be able to extend the existing BADI itself.
For doing lookup first you should know the key fields of source DSO then by using the existing field of Infospoke you will have to read data from DSO.
DATA: it_data type standard table of 'DSO Name'.
select Key1 key2 etc...
          Field1 Field2 Field3 Field4
          from DSO
          into table it_data
          for all entries of infospoke
         where key1 = infospoke1-key1
                     key2 = infospoke2-key2.
This will give you all the required records from source DSO into internal table it_data. Now you using this table you can populate the original table of Infospoke.
Regards,
Durgesh.

How to add abap stack to existing NW Java engine- for XI installation

Hi All,
I am having a netweaver Java Stack installed on my system. I would like to install XI - in order to install Xi ,I guess the system should be ABAP + Java. But since I am having java based engine, I would like to add ABAP stack to it. So, my question how to add an ABAP stack to already existing JAVA/J2ee engine.
So what this process is known as-- Is it upgrading or New Installation. Because I need the guide and CD's for it.
Can any one tell me which Guide(Install/upgrade/Master) wud help me.
Thanks
S

Hi
check the link www.service.sap.com/instguides>SAP Netweaver 7.0>installation guides there you can find what is the process which involves in installing ABAP+JAVA with PI
Regards
Uday

How to add a column in existing DTW template

Dear Expert,
I want to add a column which is in table structure of JDT1 but in DTW template that column is not there...
In my JDT1 table that column has some value and i want that value to be enter thru DTW ..
Give me step because at some stage i m making mistake....i know..
please help me
Thanks
Kevin

In JE DTW there is not proficode column, but i want that column to be loaded ?
even i try by "target table" but still nt able to load of "profitcode" in that way
How to add an existing column which is there in JDT1 table but not in JE DTW template ?
Thanks
Kevin

How to add id to the existing Authorization Object

Hi,
I want to add one id to the existing Authorization Object,How to add this?
Here is my Object and existing ID's
authority-check object 'Z_W2WALL' for user sy-uname
          id 'ZFREEZE' field r_freeze
          id 'ZLI01' field r_li01
          id 'ZLI11' field r_li11
          id 'ZLI14' field r_li14
          id 'ZLI11R' field r_li11n
          id 'ZLI20' field r_li20
          id 'ZMI10' field r_mi10
          id 'ZUPLOAD' field r_upload
          id 'Z_ARTFRZ' field r_artfrz.
Now for this i want to add
id 'Z_BIN' field r_frz.
How to do this?
Thanks

Hi Sai,
as there are already defined other id's have been added, you could also do the same way
but this will also done through your basis end, where for this id your basis team will provide the
authority to this id for the same purpose..
authority-check object 'Z_W2WALL' for user sy-uname
          id 'ZFREEZE' field r_freeze
          id 'ZLI01' field r_li01
          id 'ZLI11' field r_li11
          id 'ZLI14' field r_li14
          id 'ZLI11R' field r_li11n
          id 'ZLI20' field r_li20
          id 'ZMI10' field r_mi10
          id 'Z_BIN' field r_frz
          id 'ZUPLOAD' field r_upload
          id 'Z_ARTFRZ' field r_artfrz.

How to add subpartitions to the existing subpartition template

Hi All,
My Question is ,how to add Subpartition to the exiting subpartition template. e
like i have created a table with subpartition template with with 5 subpartitions like
subpartiton one_1 value (121)
subpartition two_2 value(122)
and now i one to add one more subpartitin to the existing subpartition template(Like modify the existing subpartition templete).
subpartition three_3 value(123)
Could any suggest me.
Thanks
Sree

>
My Question is ,how to add Subpartition to the exiting subpartition template.
>
Follow the example in the section for 'Modifying a Subpartition Template' in the VLDB and Partitioning Guide
http://docs.oracle.com/cd/E11882_01/server.112/e25523/part_admin002.htm#i1007904
>
You can modify a subpartition template of a composite partitioned table by replacing it with a new subpartition template. Any subsequent operations that use the subpartition template (such as ADD PARTITION or MERGE PARTITIONS) now use the new subpartition template. Existing subpartitions remain unchanged.
If you modify a subpartition template of an interval-* composite partitioned table, then interval partitions that have not yet been created use the new subpartition template.
Use the ALTER TABLE ... SET SUBPARTITION TEMPLATE statement to specify a new subpartition template. For example:
ALTER TABLE emp_sub_template
SET SUBPARTITION TEMPLATE
(SUBPARTITION e TABLESPACE ts1,
SUBPARTITION f TABLESPACE ts2,
SUBPARTITION g TABLESPACE ts3,
SUBPARTITION h TABLESPACE ts4

How to add new object class to a material ?

Hi experts,
I have to add new object class to a material ( classification class ) and then add new characteristics values for the material ....But i do not know which FM to do this , If you please to give me the solution for this problem
PS: rewards immediately
Thanks,

Hi,
Check this CALL FUNCTION 'CLVM_CLASS_BOOK' Run it for IN UPDATE TASK
Reward if useful,

Stock transfer between plants - Material used is Asset material

Hi All,
We are using TAXINJ.
We are doing stock transfer of an asset material from Plant A to Plant B.
Proceedure followed as below:
Supplying Plant -
STO PO - ME21N
Outbound Delivery - VL10B
PGI - VL02N
Billing - VF01
Invoice DOc - J1IIN
Receiving Plant-
Goods reciept - MIGO
Capture excise thru - J1IEX
When capturing excise ETT is GRPO and the subtransaction type used is 01
We are getting the below message:
"No Cenvat amount to be posted"
"No Cenvat Amount to be reversed"
We are not getting any message when we are not using subtransaction type 01, and we are able to post part2 entries.
Pls suggest.
Thanks in advance
Pavan.

Hi Deivakaniraja,
Thank you for your suggestion.
Still have a querry....
The subtransaction type that is defined is not conventional.
We define various subtransaction type like 01, 02, 03, 04, but there is no standard that 01 to be used only for subcontracting.
I understand that IP is defined only for Import postings.
Can you pls brief me.
Thank You in advance.
Regards
Pavan

How to add new infoobject to existing cube or dso?

Hi all,
Can we add new infoobject to exixting cube in BW 3.5 ver? if yes how can we add? Please provide me steps.
Thank you.
Sunil

Hi Sunil,
If you want to add new info object to the IC or DSO which is already holding data - then you need to make a copy of that particular DSO/IC and load the data into dummy.
Now delete the data from the IC/DSO to which you want to add the new info object. once the data is deleted it will allow you to add new info object to you IC/DSO.
save it and activate the IC/DSO
load the data from Dummy DSO and from new run on wards the newly updated info object will also get updated(historical data will not be updated if its newly added to DS as well).
If you want the historical data for the newly added field then you need to drop the compelte data and need to extract from source.
Note: You can't include the new info objects are change the existing info objects if there is data exist in the IC/DSO
Regards
KP
Edited by: prashanthk on Dec 31, 2010 10:54 AM

How to add new class to existing DC (Web Dynpro project)

Hi,
How can I add new class to an existing DC (Web Dynpro project)?
I tried adding it using File - New - Other - Java - Class, but after a build of the DC the new class (and its contents ) was completely removed.
Then I created a new DC (java project) and created a new class in that DC. This went fine, but I got into problems because of circular referencing between the new & the old DC, so no build was possible.
This can't be difficult, does somebody knows how to do it?
My temporary solution is to add the classdefinition to an exisiting .java file. Very ugly.
Thanks,
Jeroen

Hi Jeroen,
where did you create the class? If the *.java file is placed in the src/packages folder it should not be deleted by a build. (I suspect you created it in the gen_wdp folder?)
Regards,
Marc

How to add observable behaviour in existing code?

Hi everyone, I'm new to design patterns. I have an existing numerical analysis package that I use to find roots using multiple strategy (bisection, secant, newton, etc). I want to show the process of root finding for every iterations taken by the algorithm (for example, iteration 0: left = 0, mid = 0.5, right = 1; iteration 2: left = 0, mid = 0.25, right = 0.5; ... etc. Its not exactly like that, I want to show it graphically, but you see what I mean). Looks like I need Observer to add event handling to notify the change of state in each initial guess as well as signaling the event when a root is/isn't found. But the solver classes doesn't seem to be implementing Observable, they just give out the answer, or not. How do I add Observer pattern without modifying the original code? I thought about using Decorator and having the real solver do the root finding but it just doesn't make sense to me. Thanx in advance.

endasil wrote:
georgemc wrote:
endasil wrote:
georgemc wrote:
That won't get you intermediate results, though.If the method being observed needs to be firing multiple events per invocation, no, it won't.
@OP, you were on the right track with the decorator pattern (indeed, that could be just as appropriate). What made you think it was wrong?I think that's the OP's tripping point:
I want to show the process of root finding for every iterations taken by the algorithm
...But the solver classes doesn't seem to be implementing Observable, they just give out the answer, or not.
Aha. Bytecode weaving (or plain old decompiling and nicking the source) then.Nope, I didn't. You're just too damned fast!For my own good! I hit "post" and immediately go "I forgot to say X" :-/
@OP: if you want to see some examples of using bytecode weaving to introduce observableness to existing code, have a look at the sources for a test coverage tool like Cobertura. That's basically what they do. If you've never done it before, it'll take you a fair bit of head-scratching and sideways thinking to get your head round it all, but stick with it. Be prepared to learn a bit about opcodes as well. Or maybe just plundering the sources for this library is the way to go, not that I'm advocating that ;)

Office 2013 add-in - How to add custom button in existing tab/group at home and the same at individual message level?

Hello Everyone,
Currently, I'm developing an outlook add-in and would like to setup a custom ribbon button at one of the existing tabs at home screen and at message level too, when
it is opened from home screen.
Following are the helpful screen prints.
Any help would be much appreciated.
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com

Hello Ankit,
All you need is to specify the IdMso value of the built-tab where you want to place your controls. See
How to: Customize a Built-in Tab for more information (TabMail and TabReadMessage).
You can find the list of built-in controls in the following documents:
Office 2010 Help Files: Office Fluent User Interface Control Identifiers
Office 2013 Help Files: Office Fluent User Interface Control Identifiers
The Fluent UI is described in depth in the following series of articles in MSDN:
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)

How to add Spare material to Existing Asset Material.

Similar Messages

Maybe you are looking for