How to add static port in Mac OS X?

Dear All,
I need to add a static route in my Mac OS X
In windows I used to run: route add 10.0.50.0 mask 255.255.255.0 10.9.0.254 -p
Please, how can I do the same in MAc OS X?
Thanks in advance.
Marcelo

Mission Control – Work in Multiple Spaces
If you want to keep the desktops in a specific order, go to System Preferences/Mission Control and uncheck the box " Automatically rearrange spaces based on most recent use." You can also select the box below that so if you open an application, you'll be taken to that space.
If you want to cut down the number of desktops, there is also an option to remove the Dashboard as a desktop and have it work like it did in Snow Leopard. That can be set in System Preferences/Mission Control by deselecting Show Dashboard as a space. You can access the Dashboard by clicking on the Dashboard icon in the dock or using the FN 12 key.

Similar Messages

How to add a port for a IP cam in the airport extreme setting? thx!

I has buy a IP cam, but I don't know how to add a port for a IP cam in the airport extreme setting? (I can see the IP cam in local, but not the internet.) Many Thanks!

atwoodjordan, Welcome to the discussion area!
See Steve Newstrum's user tip "How do I use Port Mapping (Part I)". When it talks about giving your Mac a static IP address just substitute camera instead.

How to replace usb port in mac air 13" mid 2011?

How to replace usb port in mac air 13” mid 2011?

Take the MBA to an Apple store or an Authorized Apple Service Provider. If you are contemplating doing it your self, examine the instructions on the iFixit.com web site.
Ciao.

How to add a computer to Mac Mini server network?

Hello,
Can anyone tell me how to add a Mac Air to the computers my Mac Mini server recognizes? Currently, I cannot share files between computers.
Thanks for any help!

Hmmm, not sure which end the problem is on, if you don't get an answer here you might post over here...
https://discussions.apple.com/community/servers_enterprise_software/mac_os_x_lio n_server

How to add specific ports to OS X Lion firewall

I need to add specific ports/port ranges to the OS X Lion clients' firewalls, any ideas?
OS X Lion firewall settings only allow adding applications. There is no "LDAP" application, it's built into the Network preferences settings. The LDAP server is an OS X Lion Server running Open Directory.

iosw wrote:
I guess the flexibility in the regular Lion clients with ports is not possible. It's only possible with OS X Lion Server, fair enough.
No, you can configure both the client and server as much as you want. The only issue is that most people just don't understand what a firewall does (they think it is the same as anti-virus) so neither Apple nor I will bother explaining all the nitty-gritty details right off the bat.
The client version of Lion doesn't need to be providing any services at all. Hence, there is really no need to run the firewall. If you are doing something fancy that the application firewall doesn't quite support, then you might want to run the real ipfw firewall instead. It is also installed on the client, but isn't a tool for the great unwashed.
Personally, I find the fancy stuff pretty interesting, but I don't think you are doing that.
We're trying to configure SSL within the Lion clients and didn't know if there was an incoming requirement. There's a bug (logged even by Apple) when Lion client's attempt to bind to an SSL enabled Open Directory server. So the firewall preferences wasn't the reason for this failure. We're resorting to non-SSL binding until Apple fixes the problem, although we running on a private network and can get away with non-SSL for the time being.
You might want to ask about this in the Server forums. This could be a situation where Apple isn't going to bother explaining the details on how to fix it because it would just confuse most people and they may already have it fixed in-house. It has already been discussed and some people say they have fixes. See the details in this thread.

How to add multiple desktop on mac os x?

On my previous version of Mac OS X I was able to add as much desktops I want by just going into upper right corner with my pointer and clickin on the sign +. Now, after replacing my SSD and installing new OS I don't have that option. Does anyone knows how to add desktops on Mac OS 10.7.5? Thank you

Mission Control – Work in Multiple Spaces
If you want to keep the desktops in a specific order, go to System Preferences/Mission Control and uncheck the box " Automatically rearrange spaces based on most recent use." You can also select the box below that so if you open an application, you'll be taken to that space.
If you want to cut down the number of desktops, there is also an option to remove the Dashboard as a desktop and have it work like it did in Snow Leopard. That can be set in System Preferences/Mission Control by deselecting Show Dashboard as a space. You can access the Dashboard by clicking on the Dashboard icon in the dock or using the FN 12 key.

How to add static resource file into the NetBean project

I have several static data files(such as icons, images and etc.) need to be loaded by the program. How to add them into the NetBean project?
Thanks

Try a NetBeans forum. This is the Java Compiler forum.

How to add static data in ADF table using ADF 11g?

Hi
Can any one tell me how can I add static data in ADF table?
Thanks

You can try this one. I created this static table just for viewing purpose.
Open Create View Object wizard
Choose, “Rows populated programmatically, not based on a query” which is 3rd radio button option
In Attribute tab, create some ‘Updatable’ Attributes
Choose the AppModule in the final step.
Drag and drop the view object as ADF table.
Next, programmatically insert data in your backing bean.
        ApplicationModule applicationModule = this.getApplicationModuleForDataControl("TmpTableAppModuleDataControl");
        ViewObject vo = applicationModule.findViewObject("ProgViewObj1");
        Row newRow = vo.createRow();
        newRow.setAttribute("updAttr1", value1);
        newRow.setAttribute("updAttr2", value2);
        vo.insertRow(newRow);If you add this code in buton action you have to add button's partialTriggers to table id.

How to add licensed ports to essbase olap server for as400

Does anybody know how to add aditional licensed port to essbase olap server for as400 without having to reinstall the product, or reinstall the fixpack? thanks in advanced!

On Unix / Linux you should be able to leverage the response from Raphael and change:
Location＝%BOBJDIR%/bobje/data/.bobj/registry/software/business objects/suite 11.5/sap/keycode/.registry
For more information verify the below link
[How do you update the SAP Integration Kit license?;
Regrads
Pardhu

How to assign static ip via mac address on LINKSYS WRT54G2

? how do i assign an ip per mac address with this router? i can't seem to find the option and its becoming a real pain
on my buffalo router i can paste a mac address and assign and ip for each mac on my network

The feature that you are looking for is called "DHCP reservation". This feature is not available on the WRT54G2. Several of the newer Linksys wireless n routers support this feature.
You can assign your computer a fixed (static) LAN IP address, however, you will need to do it manually. Linksys has some very specific rules about assigning fixed LAN IP addresses. Be sure to follow them carefully.
Rules for using fixed LAN IP addresses on Linksys routers:
With Linksys routers, a fixed (static) LAN IP addresses must be assigned in the device that is using the address. So you need to enter the fixed address in the computer or printer, not in the router.
When using a Linksys router, any fixed LAN IP address must be outside the DHCP server range (typically 192.168.1.100 thru 192.168.1.149), and it cannot end in 0, 1, or 255.
Therefore any fixed LAN IP address would normally need to be in the range of
192.168.1.2 thru 192.168.1.99 or
192.168.1.150 thru 192.168.1.254
assuming you are still using the default DHCP server range.
Also, in the computer, when you set up a static LAN IP address, you would need to set the "Subnet mask" to 255.255.255.0 and the "Default Gateway" to 192.168.1.1 and "DNS server" to 192.168.1.1
It is also important that no two devices on your network be set to the same static LAN IP address.

How to add Dell printer to Mac Mini?

How do I add a dell printer to Mac Mini?

Did you try to Secure Empty the trash?

How to add Ethernet ports to an Airport Extreme Base Station?

I have successfully connected an HP Office Jet 6310 to the Airport Extreme Base Station, after downloading the latest software from HP. It is printing wirelessly, and it is great so far.
The only problem is that the cable modem connected to ADSL has only one Ethernet port, and the Airport Extreme Base Station also has one Ethernet port. However, I need one more port to connect a phone (Vonage Telephone Adapter = VTA).
What is the easiest way to achieve this? I saw several other messages discussing hubs and routers, but the answer is not clear yet. If I purchase an additional router, should it be connected between the cable modem and the Airport Extreme Base Station, or the other way round?
Any help or advice would be appreciated!
Thank you in advance for your time.
MacBook Pro with 1.83 GHz Intel Core Duo Mac OS X (10.4.7)

One final vital piece of information, which should be my conclusion on this topic.
Following the advice received, I purchased a Switch from Linksys. Since the device didn't work for my purpose (dividing the Ethernet connexion into an Ethernet line for the HP printer and the Vonage phone), I called the Linksys support.
I was told that what I needed was not a switch, but a router. I thus had to get reimbursed for the switch and hunt for the proper router.
Finally, today, I have been able to find the item corresponding to my needs:
A Belkin Wireless G Router F5D7230-4
It costs less than 50 US$ and has all the necessary Ethernet ports. The setup is very simple, and I got it operational within a couple of minutes, despite some small problems getting the setup Wizard to work. It is Mac OS X compatible.
Thus, at the end, I have got the HP 6310 Office printer and the Vonage VTA phone working together, with a robust Wireless network including WPA security. I would recommend this type of setting.
The only trouble is that the AirMac Extreme Base Station has become completely useless! I will perhaps keep it as a souvenir, or as a decoration in the living room... This wouldn't have happened if the creators of this nice object, which is extremely expensive for what it provides, would have thought of including at least two Ethernet ports!
The unexpected reply to my query could thus be ironically formulated by saying: "replace the Airport Extreme Base Station with a cheaper an more efficient device." Sorry for that!
With my best regards to those who took the trouble to read this thread to the end.
Yours, Hotaru

How to add Verizon mail to Mac book pro

Hello,
I spent 7 hrs in an Apple Store with Apple folks..my husband has a Verizon email account which is the only one he uses..
apple can find the reason why this email acct is only working only if we go thru the Internet @ Verizon.com?...
In the apple mail the only mail flowing is a yahoo acct associated with his apple I'd/ pleasssssse
If someone knows anything please reply..I have spent hours on phone with Apple tier 2/ Verizon email
Group and they are saying if I can see my email on Internet the mail is working..we verified the settings for Verizon's Servers / incoming / outgoing !
Please I want to go on bottom of that Mac book and click and find All of my mail.....

They told me to change to these about a year ago:
Dear Valued Verizon Customer,
To further improve security and your online experience, Verizon has modified the way Verizon.net email is handled when sent or received through an email application (such as Outlook Express®, MS Outlook, Windows Live Mail or via hand-held devices).
In order to take advantage of these improvements, we are requiring customers to modify the server settings (also known as “POP” settings) for their email applications on every device used to access Verizon.net email. Please update your POP email application’s inbound and outbound server settings as soon as possible to match the new settings below:
Server
Current Setting
New Setting
SSL Enabled
Port
POP3 Server
incoming.verizon.net
pop.verizon.net
YES
995
SMTP Server
outgoing.verizon.net
smtp.verizon.net
YES
465
Depending on your email application, you may need to disable/turn off Secure Password Authentication and, if applicable, make sure your Authentication method is set to “Password” or “Normal password.” In addition, you may need to reboot/restart your device for these new settings to take effect and for your email to continue working properly.
Note – There are no setting changes when accessing Verizon.net email via MyVerizon/webmail.
If you need assistance in updating your settings, visitverizon.com/emailsettings for further information and step-by-step instructions. You can also visit our online forum at forums.verizon.com for additional information, if available.
If you want to verify the validity of this notification and the instructions contained herein, please sign into your MyVerizon.com account and click on “Check Verizon Announcements” under the “I Want to…” menu bar.
Thank you for being a valued Verizon customer. Please act now to make sure your email account has the proper settings.
Sincerely,
Your Verizon Team

How to add/ remove softwares in mac

Hi
If any one of you can help me, In adding or removing the softwares in Mac os X. And also, help me about the .dmg / .bin formats.
Kindly fwd it to [email protected]
Thanks in advance!!

Welcome to Apple Discussions!
DMG files are disk image file formats which when opened open a virtual floppy disk on your desktop which can then have files either dragged to the Applications folder if they are applications, or installers run direct from the DMG to the Applications folder. Removing applications generally either is dragging them to the trash, or running a provided uninstaller with the program. Some programs may dump preferences in the system which may confuse different version installers of the same program if you decide to reinstall them later. This varies by program.
.bin files are simply files that are stored in binary format on archive sites for easier transfer to your machine.

How to add .a files in Eclipse IDE,

We are using mingw and eclipse IDE how to add static library files of type .a in Eclipse IDE

We are using mingw and eclipse IDE how to add static library files of type .a in Eclipse IDE

How to add static port in Mac OS X?

Similar Messages

Maybe you are looking for