How to add "%" symobl in Bex query?

Hello All,
In a Bex query, there is one structure with 3 elements as Rows. I have to show the resultant values in a specified format...
in the first row, the values are to be suffixed with character "K" and the remaining 2 rows values are suffixed with "%". I will use this query in a webtemplate. Is there any funcationality in Bex to perform my requirement?
Regards,
Ravi

This can be done using the table interface for web applications. Using this you will be able to manipulate the cells in a web report.
See the attached documentation on this.
http://help.sap.com/saphelp_nw04/helpdata/en/f5/1bac3a22f0785ce10000000a11402f/content.htm

Similar Messages

How to add filter in Bex report

hi how to add filter in BEx report and what is the difference between filter and free charcteristics.
Regards,
Viren.

Hi Viren,
difference between filter and free characteristics is that free characteristics can be added to drilldown at query runtime. Filter values can not be changed at query runtime.
You can add a filter to a query by placing a characteristic in filter section and restrict the characteristic to certain values. Characteristics in rows / columns / free characteristics section can be restricted to certain values, too.
Best regards,
Björn

Can we add logo to BEx query ???

Hi All,
I would like to know can we add logo to Bex query. I know that we can add to Bex workbook.
Thanks

Is this for BEx Analyzer or BEx Web Analyzer?
For BEx Web Analyzer, you can take the standard template 0ANALYSIS_PATTERN, save it as a custom template and customize it to include a corporate logo. See the following for a How To... on this:
[How to Enhance SAP BEx Web Analyzer (0ANALYSIS_PATTERN)|http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3414900)ID0574286750DB11281326545475972586End?rid=/library/uuid/200d6cb6-080e-2b10-84a5-b96723ad8f18&overridelayout=true]

How to add more than 1 query in workbook

Hi All,
How do we add More than 1 query in workbook, Can any one provide me steps.
Thanks in Advance.

Hi,
If you are using BI7 Bex analyazer, please check whether the following explanation helps you:
"Steps of creating workbook and to insert more than one query in a workbook.
When you run a query and it opens in Bex Analyzer you can click the save button and pick "Save as Workbook".
Once you save it as a workbook Click on the "Design Mode" button in the Bex toolbar (looks like an A).
Click in the sheet where you want the new query to go, click the "Analysis Grid" button. It will add the analysis grid to your new sheet.
Right click on the Analysis grid and go to properties.
Click on button to change data provider and select the query you want to attach.
Exit design mode and you should be all set. "
Thanks & Regards,
Sapna

How to add Logo in Bex report

Hi Guys,
How to add logo in a Bex report.

Hi ABDUL KHADAR
We can only add the logo at Work book level but not the query level @the query
level it wont allow us to add.
Jus open an ordinary excel sheet format it as you wish Ctrl+A and fill with white
color .Then jus save u r logo which u wont to upload in the desktop.
Then go to file insert picture or file and place it wher ever u wont in the work sheet
and save it as a templete and then insert the query in this templete and format it
as per your standarads.
If any struck up feel free to let me know. We explain you clearly...
hope its helpful..
Cheers
R M K
**Assigning poitz ez da only way of saying thankz in SDN**

How to create variables in Bex query

Hi all,
can anyone please explain how to create the variables and how many types of variables in Bex Query.
Thanks in advance
James

Hi James,
You can create variables in the BEx Query by right clicking on your characteristic and then selecting Restrict. A pop up window will appear. On the left side of the pop-up window, right click on a white space and then select New Variable. The Variable Wizard will then appear - you can now create your variable acording to your specifications. For more info on variables, please click on the link below:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56a7e09411d2acb90000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/61/579b3c494d8e15e10000000a114084/content.htm
Hope this helps,
Juice

How to design Label in Bex Query

Hi to all,
How to create label in query .
i have designed a query which contain sales value for coffe1 coffe2 coffe3 and sales value for tea1 tea2 tea3 . But i need to group coffe1 coffe2 coffe3 under COFFE as label, and tea1 tea2 tea3 group under TEA as label example .
    COFFE ( LABEL)            I        TEA ( LABEL )
coffe1 coffe2 coffe3         I       tea1 tea2 tea3
1          4         6                 I        2       5       7
2          5         7                 I        3       7      9
i that can be done unde query designer or report designer or any other tool is for that.
please can any one tell me how to do it and step's regarding that.
i shall be thnakfull to you for this.
Regards
Pavneet Rana

Thanks for reply.
I have created already a cerated a structre under Columns and have displayed tea1 tea2 tea3 and coffe1 coffe2 coffe3 as selection and restricted with sales value.
but when i execute query it display like
tea1 tea2 tea3 coffe1 coffe2 coffe3 .
i need to group tea and coffe under TEA and COFFE label.
can i do some thing in bex query designer.
can i do it with text variable.
I shall be thankfull for reply.
Regards
Pavneet Rana
Edited by: pavneet rana on Oct 4, 2010 2:39 PM

How to add extra column in query designer

Hello Guru's,
                     I got the query like this
                                    Actuals
                cal/month   01/2008   02/2008   03/2008
cash
reveunve
liabilities
i need the query to be like this
                                               Actuals
                cal/ months 01/2008 02/2008 03/2008   Q1   04/2008 05/2008 06 2008 Q2
cash
revenue
libilities
that Q1 is sum of first three months,
can you please tell me how to add extracolumn and add those.
Thanks,
sneha

Hi sneha,
You can do this by using structure .Create the selection for3 month using variable and defining offset for that, creat new formula for Q1 = 123 , then create same selection for next 3 months and same for Q2.
Regards,
Sumit.

How to add link button in Query generator

Hi,
I am trying to add link button in Query reports. While the query is for system table it automatically gives columns with link button but how to do this for user Tables.

Hi,
Even by standard, this is not possible only when you using UDO.
You can create your form with Matrix, and use FlushToDataSource Method to load large amount of data inside. Now you can program the linked button click (et_MATRIX_LINK_PRESSED) by columns.
Regards,
J.

How to add 2 coloumns in query

if in table LQUA there are more inventory from different batch than the ones showed in the current query, LQUA-CHARG with quantity in LQUA-GESME, then shows that line in the query with column ORDER in blank and column ALOC QTY in blank also. And column FREE QTY will show the same qty than column TOTAL STOCK.

hi,
refer to this link..Re: How to add new fields in SAP-Query

How we create system for Bex query

Hi
I want to access Bex query in VC , I think we can do this by creating system in poratl. pls tell me how we create system in prtal for this.
Regards
Amit

Hi Naresh,
Pls send the Document for me also.
This is my mail id: [email protected]
Thanks & Regards
Prakash T

How to bind data from BEx Query to BO Dashboard

Hi
Could someone please share screenshot steps how to bind BEx Query data into BO Dashboard.
We've created BICS Connection .....
It will be helpful if someone can share screenshots of building small Dashboard on BO Dashboard.
Thanks,

Hi Pawan,
Please find the below links, there are many links to this in SCN search there before posting you could save lot of your time.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a01a9a87-936f-2f10-e6b9-dbb1ec5064ff&overridelayout=true
http://scn.sap.com/docs/DOC-47314
Thanks&Regards,
Krishna

Hi, how to set date in bex query.

hi
experts
i need do display date and name in my bex query.

Hi,
I hope it is not possible in BeX Query designer but it is possible in WAD by using Text elements:
http://help.sap.com/saphelp_nw04/helpdata/en/9f/4e9d39d44cd45ee10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P

How to add search criteria to Query Reqion (11i RUP6)

I'd like to get some directions on how to add a field that would be used in the search criteria when Go button is submitted.
Thanks in advance

Hello Thomas,
Maybe this link can help.
add new field to search criteria and result.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0747ac2-ffd9-2910-de9a-8a3dc44da8b4?QuickLink=index&overridelayout=true&12966506314316
Search Options - Knowledge Management - SAP Library
regards,
Grace

BEx Analyser: how to add filter information in query output

Hello,
When query is executed in BEx Analyser, there are three buttons with additional info. But none of them shows the selections that were made when the report was executed (variable screen) and the "static" filters within the query definition. How can I solve this problem?
Thank you.
Kind regards,
Danijela

I have place static filter left to the table on row 115 and then I copy it to desired destination in VBA callback function.
(I also have filter values on row 65)
HTH.
BR
Ondrej
Sub SAPBEXRefresh(queryID As String, resultArea As Range)
    If queryID = "DATA_PROVIDER_1" Then
       j = 15
       i = 115
       While Sheet2.Cells(i, 6) <> ""
         If Sheet2.Cells(i, 7) <> "Empty selection" And Sheet2.Cells(i, 7) <> "" Then
           Sheet2.Cells(j, 6) = Sheet2.Cells(i, 6)
           Sheet2.Cells(j, 7) = Sheet2.Cells(i, 7)
           Sheet2.Cells(j, 6).Interior.Color = RGB(239, 246, 251)
           Sheet2.Cells(j, 7).Interior.Color = RGB(239, 246, 251)
           Sheet2.Cells(i, 6) = ""
           Sheet2.Cells(i, 7) = ""
           j = j + 1
         End If
           i = i + 1
       Wend
       k = 65
       While Sheet2.Cells(k, 6) <> ""
         If Sheet2.Cells(k, 7) <> "" And Sheet2.Cells(k, 7) <> "Prázdné vymezení" Then
           Sheet2.Cells(j, 6) = Sheet2.Cells(k, 6)
           Sheet2.Cells(j, 7) = Sheet2.Cells(k, 7)
           Sheet2.Cells(j, 6).Interior.Color = RGB(213, 227, 242)
           Sheet2.Cells(j, 7).Interior.Color = RGB(213, 227, 242)
           j = j + 1
         End If
         Sheet2.Cells(k, 6) = ""
         Sheet2.Cells(k, 7) = ""
         k = k + 1
       Wend
       While j < 65
         Sheet2.Cells(j, 6) = ""
         Sheet2.Cells(j, 7) = ""
         Sheet2.Cells(j, 6).Interior.Color = RGB(255, 255, 255)
         Sheet2.Cells(j, 7).Interior.Color = RGB(255, 255, 255)
         j = j + 1
       Wend
    End If
end sub

How to add "%" symobl in Bex query?

Similar Messages

Maybe you are looking for