How to add tape drive in hyper V operating system

how to add tape drive in hyper V operating system
tape drive may be to scsci or USB port.
how to add pls suggest

how to add tape drive in hyper V operating system
tape drive may be to scsci or USB port.
how to add pls suggest
You need something like StarWind Tape Redirector that "iSCSI-izes" hardware attached to host. So you'll be able to connect with iSCSI initiator from inside a VM running on this host, some other host or even other physical machine (as long as it
has iSCSI connectivity), see:
StarWind Tape Redirector
http://www.starwindsoftware.com/download-starwind-tape-redirector
So at the end of the day you'll have something like on the picture below:
Good news: this software offering is 100% free so you don't need to pay anything to anybody :)
Hope this helped!
StarWind Virtual SAN clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Similar Messages

  • What file name is for the driver of gpib-usb-b?and how to add the driver file to vb in win2000??thanks

    what file name is for the driver of gpib-usb-b?and how to add the driver file to vb in win2000??thanks

    Hi,
    Multiple files are required for the proer fnctioning of any of our GPIB products. Unfortunatly the installation is not as simple as copying a single file over. If you wish to make the installer silent, i believe this is entirely possible in a fashion similar to the details given at http://digital.ni.com/public.nsf/websearch/0730A66245E6808086256CA8006E2183?OpenDocument.
    Hope this helps out!
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

  • How to add more disk space into /   root file system

    Hi All,
    Linux  2.6.18-128
    can anyone please let us know how to add more disk space into "/" root file system.
    i have added new hard disk with space of 20GB, 
    [root@rac2 shm]# df -h
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/hda1             965M  767M  149M  84% /
    /dev/hda7             1.9G  234M  1.6G  13% /var
    /dev/hda6             2.9G   69M  2.7G   3% /tmp
    /dev/hda3             7.6G  4.2G  3.0G  59% /usr
    /dev/hda2              18G   12G  4.8G  71% /u01
    LABLE=/               2.0G     0  2.0G   0% /dev/shm
    /dev/hdb2             8.9G  149M  8.3G   2% /vm
    [root@rac2 shm]#

    Dude! wrote:
    I would actually question whether or not more disks increase the risk of a disk failure. One disk can break as likely as one of two of more disks.
    Simple stats.  Buying 2 lottery tickets instead of one, gives you 2 chances to win the lottery prize. Not 1. Even though the odds of winning per ticket remains unchanged.
    2 disks buy you 2 tickets in The-Drive-Failure lottery.
    Back in the 90's, BT (British Telecom) had a 80+ node OPS cluster build with Pyramid MPP hardware. They had a dedicated store of scsi disks for replacing failed disks - as there were disk failure fairly often due to the number of disks. (a Pryamid MPP chassis looked like a Xmas tree with all the scsi drive LEDs, and BT had several)
    In my experience - one should rather expect a drive failure sooner, than later. And have some kind of contingency plan in place to recover from the failure.
    The use of symbolic links instead of striping the filesystem protects from the complete loss of the enchilada if a volume member fails, but it does not reduce the risk of loosing data.
    I would rather buy a single ticket for the drive failure lottery for a root drive, than 2 tickets in this case. And using symbolic links to "offload" non-critical files to the 2nd drive means that its lottery ticket prize is not a non-bootable server due to a toasted root drive.

  • How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

    How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

    Do a backup,  preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • Yosemite looks like a downgrade, flat, childish and no more ability to make the view of anything personal.  How do I go back to the previous operating system?

    Yosemite looks like a downgrade, flat, childish and no more ability to make the view of anything personal.  How do I go back to the previous operating system?

    Erase your hard drive using Disk Utility from the Recovery HD, then restore your old system from your backups.

  • How do I create multiple live USBs of Operating systems to boot from on one flashdrive?

    How do I create multiple live USBs of Operating systems to boot from on one flashdrive?
    I am attempting to create multiple live USBs within one flashdrive so that i can boot various operating systems without having to buy multiple USb sticks. I am using a Mac OS X Snow Leopard 10.6.8 Operating System currently. I am using the Terminal provided by the OS.
    I would like to try Debian, Kali, Precise Puppy, and Sabayon- with one space left empty for whatever Linux OS I would like to try next. I have partitioned an 8GB flashdrive into the following sections:
    name of intended OS,     space allocated for it:
    1)Debian ........................1.32 GB
    2)Kali..............................2.61GB
    3)Precise Puppy..............163.7MB
    4)Sabayon.......................1.77GB
    5)TBD..............................2.14GB
    I have figured out how to change the .iso files of the operating systems into .img files with the following commands:
    hdiutil convert -format UDRW /path/to/input.iso -o /path/to/output.img
    a .img.dmg file is created, this is corrected in the next line of code *please note: I am a a very beginner at programming, and would greatly appreciate any help. Thank you!
    mv /path/to/output/file.img{.dmg,}
    This is where I started to get confused:
    I entered diskutil list to find the location of the partitions on my flashdrive, and this is the relevant section:
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     FDisk_partition_scheme                        *8.0 GB     disk1
       1:                 DOS_FAT_32 DEBIAN               1.3 GB     disk1s1
       2:                 DOS_FAT_32 KALI                    2.6 GB     disk1s2
       3:                 DOS_FAT_32 PRECISE            163.7 MB   disk1s3
       4:                 DOS_FAT_32 SABAYON           1.8 GB     disk1s5
       5:                 DOS_FAT_32 TBD                     2.1 GB     disk1s6
    This is the code I attempted to use and the subsequent result:
    charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
    dd: /dev/disk1s1: Resource busy
    *at this point I went to the Disk Utility GUi and unmounted only the DEBIAN partition, now back to the terminal*
    charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
    dd: /dev/disk1s1: end of device
    1259+0 records in
    1258+1 records out
    1320005632 bytes transferred in 1011.966891 secs (1304396 bytes/sec)
    Please may someone help explain why I had a return value of +1 in my records in and how I can make it work properly.

    I would like to know the answer to this as well.  I tried renaming the 3D version by adding 3D after it, but it still not a separate movie in iTunes.
    It's putting them in the same folder.

  • How do i go back to my old operating system? now i can't play my photos on apple tv with lion os

    how do i go back to my old operating system? now i can't play my photos on apple tv with lion os

    There's an overview here
    http://applehelpwriter.com/2011/09/10/how-to-turn-a-lion-into-a-snow-leopard/

  • [823] [HY000] [Microsoft][ODBC SQL Server Driver][SQL Server]The operating system returned error 1450(Insufficient system resources exist to complete the requested service.) to SQL Server.

    Hi,
    I am facing an issue while loading fresh data into SQL server database.
    we are able to load data into staging area, but while processing stored procedures system face bellow error message :
    [823] [HY000] [Microsoft][ODBC SQL Server Driver][SQL Server]The operating system returned error 1450(Insufficient system resources exist to complete the requested service.) to SQL Server during a write at offset 0x00000243bd0000 in file 'E:\SQLDB\DBName.mdf'.
    Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC
    CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
    we use windows 2008 R2 with SQL server managment studio 2008.
    Appreciate your suggestion.
    Thanks in advance.
    Best Regards,
    Manorath 
    Manorath

    Hi Manorath,
    Based on my research, this issue can be occurred in the following scenarios:
    You are running a DBCC command on a large database. For example, you are running the DBCC CHECKDB statement on the database. At the same time, you run many DML statements on the database.
    You create a database snapshot for a large database. At the same time, you are running many DML statements on the database.
    In these scenarios, the SQL Server service stops responding. The DBCC CHECK statement is never completed, and you receive the error message repeatedly.
    This issue occurs because the sparse file for a database snapshot file has exceeded the file size limitation in NTFS file system. When the operating system error 1450 occurs, SQL Server enters an infinite retry loop.
    To fix this issue, please download and install Cumulative update package 1 for SQL Server 2008 Service Pack 1. Besides, because the fixes are cumulative, each new release contains all the hotfixes and all the security fixes that were included with the previous
    SQL Server 2008 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix.
    Reference:
    http://support.microsoft.com/kb/967164
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • I need a operating systems from my mac book pro. I will like to change my hard drive, I need a operating systems from my mac book pro. I will like to change my hard drive

    I need a operating systems from my mac book pro. I will like to change my hard drive, I need a operating systems from my mac book pro. I will like to change my hard drive

    To reinstall the original OSX in your rMBP, boot the MBP using the COMMAND-OPTION-R keys.  The display should show a picture if the planet earth and you will be connected to the Apple servers.   Make certain that you have a solid Internet connection and follow the instructions.
    For SSD options look at this link:
    http://eshop.macsales.com/shop/SSD/OWC/Air-Retina/Apple-MacBook-Pro-Retina-2012- Drive-Internal-Flash
    Ciao.

  • How to upgrade ( touchsmart 610-1130f ) under Linux Operating System: Ubuntu 10.11

    How to upgrade ( touchsmart 610-1130f ) under Linux Operating System: Ubuntu X11
    Unfortunatly didn't do it before erasing Win Se7en.

    I got the answer: If your operating systemt is not listed, we don't have upgrade for you.  If I knew that I woud'nt buy a HP computer.

  • How to upgrade ( touchsmart 610-1130f ) under Linux Operating System: Ubuntu 11.10

    How to upgrade ( touchsmart 610-1130f ) under Linux Operating System: Ubuntu 11.10
    Options 
    How to upgrade ( touchsmart 610-1130f ) under Linux Operating System: Ubuntu X11
    Unfortunatly didn't do it before erasing Win Se7en.

    I got the answer: If your operating systemt is not listed, we don't have upgrade for you.  If I knew that I woud'nt buy a HP computer.

  • I downloaded microsoft office to my MBP and my question is how do i get the right file or operating system to open it and so that i can use it?

    i downloaded microsoft office to my MBP and my question is how do i get the right file or operating system to open it and so that i can use it?

    Welcome to the Apple Support Communities
    There are two Office versions: Office for Windows, and Office for Mac.
    I suspect that you have downloaded Office for Windows, and you can use it if you install Windows, but a cheaper and easiest way to use Office is to use Office for Mac, so you won't have to install Windows. See > http://www.microsoft.com/mac

  • How should implement multi-thread in single-threaded Operating system using

    How should implement multi-thread in single-threaded Operating system using java?
    Java supports "Multi-threading".Is there is any way run the multiple threads (Implementing multi threading) using java in a Single-threaded Operating system (That is the operating system does not support for multi-threading).

    Previous questions from OP suggest they are using J2ME, so the question might be possible.
    806437 wrote:
    How should implement multi-thread in single-threaded Operating system using java?
    What is the actual question/problem?
    A java app doesn't do threads or not do threads. It uses classes. The VM does threads.
    So if you have a platform that does not have threads and you want to support the thread class then the VM, not a java app, must provide some pseudo mechanism, such as green threads, to support that.
    If your question is about java code and not the VM then you must build a task engine and insure that the tasks are of short enough duration that it is an effective use for your system.

  • What's the go with this latest update. Half my apps don't work and the iPad runs slower? How do I go back to the old operating system?

    What's the go with this latest update. Half my apps don't work and the iPad runs slower? How do I go back to the old operating system?

    Make sure your apps are updated.  You might try Settings > iTunes & App Store > Automatic Downloads - Updates = "On".
    You cannot go back to an old operating system.

  • How do you receive latest podcasts on new operating system music app?

    How do you receive latest podcasts on new operating system music app? I can't seem to find the get new episode option. I have to go to iTunes search for my podcasts and then update.

    Try this:
    Settings > General > Accessibility > Large Text

Maybe you are looking for

  • Change logs for query...........

    Hi, How to check the logs for query changes. Means which user has done what change.In properties we get the last user only. Is there any way to check the full history of changes? Can we change that in some transport request? Bye, Jeetu

  • Will bright light (camera flashlight) damage the screen?

    I opened the flashlight application in my mobile phone which utilizes the in-built camera flash. It's pretty bright and I've used it to take a look at my MBPr's screen up close. I put the computer in sleep mode and flashed the light directly at certa

  • Control Hints, various languages????? 9.0.3

    Hi, how can i set the control hints for an attribute for various languages. in jdev 9.0.2 it was very easy but in jdev 9.0.3 pre?????? Pleas help Thanks Achim

  • Activation not possible now try later or use itunes to activate. Tried both not possible it seems.

    Error : Activation not possible now, try after sometime or try through itunes. Tried both but not possible. Pls help

  • BDC Equipment Master IE01

    Hi all,       I am doin master upload for equipment.The equipments are succesfully created.But for certain records deletion flag needs to be set and sub equipments need to be created.This is possible only in change equipment ie IE02.So while I go to