How to add the actual figure alone the plotted line

Hi,
Please advise on how to show the database figure alone a plotted line as per attached
Thanks

Then Change the diagram type to "Line with Markers":
Olaf Helper
[ Blog] [ Xing] [ MVP]

Similar Messages

How to add the new line in reciever FCC

Hi All,
I have my reciever FCC with me, but I just need to add one more additional line or you can say seprate the first line.
So how to add extra or new line in the current structure?
Please let me know if there is any parameter for this.
Thanks in advance.
Regards,
Rahul Kulkarni

Hi Rahul,
You can achieve this by endseperatot "nl"
If record set structure is * means fine, you just add second line field names by using end separator "nl".
If you added first line names in recordsetstructure add second line names as well and remaining same use end separator.
Example (below file is having two lines):
<NameA>
name,address,id
empid,sal,region
<NameA/>
your FCC will be (according to your requirement the below 3 fileds will be use full).
Recordsetstructure - *
NameA.fieldvalues - name,address,id
NameA.endseperator - nl
NameA.fieldvalues - empid,sal,region
Thanks & Regards,
A.Neelima.

How to add the enclosed line?

i use the new Box()
to draw a box.
eg:
objSpin.addChild(new Box(0.4f, 0.4f, 0.4f, boxAppear));
where objSpin is a transformGroup
however, there is no enclosed line for the 3D box.
how can i add it?
thx all experts.

I'm not sure I know what you mean by the "enclosed line". What are you trying to add?

How to add the IP address helper command to the switch

Hi
I am trouble shooting a SF 200-48P and I am a bit lost without a CLI not used to the GUI. What I need to know is how to add the IP address helper command to the switch?
I have a number of IP phones which are not getting an IP address from DHCP (PCs which are diasy chained off the phones are all working correctly). On the higher end switches I would have added the IP address helper command to the VLAN and that would have sorted it. However I can't seem to figure out how to do this on the small business switch.
Thanks
Lorne

Thanks Rizwan. I was banging my head wishing they weren't small business switches as I felt lost without the command line!
Lorne Gallagher | McCann FitzGerald Solicitors | Riverside One, Sir John Rogerson's Quay, Dublin 2, Ireland | DDI +353 1 607 1726 | Fax +353 1 829 0010 | www.mccannfitzgerald.ie
Ireland Law Firm of the Year 2011 | Chambers Europe
Ireland Law Firm of the Year 2011 | International Financial Law Review

How to add the Social Network share buttons (that work!) to share INDIVIDUAL post from the same page

How to add the Social Network share buttons like Facebook and Twitter (that work!) to share INDIVIDUAL post on the same web address in Dreamweaver? I have searched on google and youtube tutorials, but most of them are "Blogger" and "Wordpress" users.. The only Dreamweaver tutorial is the one that share THE WHOLE page (not individual post on a page). There is Facebook Integration on Dreamweaver (29 Dollar download from Adobe) but so far no review about it so I don't want to spend money for something I don't know. There is also Sharrre but they say there is a bug. It seems like everyone out there use these buttons but I start to get crazy since it seems easy but it's actually complicated to get the html or js script to paste on! Any help would be very much appreciated. Thanks.

Cool,
Here is my test site. I have made at least 3 articles (Fashion, Sport, and Art) with thumbnail images on it.
http://andiratih.free.fr/
On each article I add the share buttons from "AddThis".
However, if I want to ONLY share the "Sport article" on Facebook by clicking share-->Facebook, then the feed is scrambling my images on other articles too and it eventually just share the whole page instead of one particular article.
It is now fine since I only build 3 articles, but as you see when the page is getting long with at least 20 articles it will not be ok.
I don't want to make individual page for each article either, since they are just short article each, and I intend to use this page as a welcome page to update the latest activity every half year.
I have seen many bloggers or pages where even if they have many article on ONE page, they are able to share one particular article to Facebook, and when we click (via Facebook) it will redirect us to exactly that particular article even if the article is on the bottom of the page, and not just bring me to the top of the page only and have to search by myself by scrolling to the bottom of the page to see the article.
Infact, Bloggers and Wordpress seems to have the tool for that so that we can just click and add. I am not a Blogger or Wordpress users but I saw youtube tutorials on that.
I have heard about Dreamweaver behavior, and does this will help to achieve what I want (sorry I'm a beginner)? I also heard about meta tags but I don't know how and where to get them to paste to my html source code.
I have found several sites where the person show how to do this, but when I tried it didn't work, and in fact some other discussions about this are never solved.
Thanks for your input.

How to add the date field in the dso and info cube

Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KK

my prob is solved
KK

SSRS 2008 Work order report , in sub total donot want to add the 0 level in ( how to add the expression )

working in Work order report, this report has different level , for example
0 level transaction
1 level transaction
in subtotal don't want to add 0 level transaction,
when I did the sub total it added all the level , so in sub total amount double up because of that
how to add the expression so I can the level 0 take out from sub total , so it does not include in sub total
can some one please help me with this
thanks in advance

Hi Simon_ Hou
I tried the expr the way you suggested , it did not work getting error message, the exp I added is below
this the expression I added on sub total where is highlighted in Yellow, under Cost amount column,
I really appreciate the help
=Sum(IIF(Fields!COLLECTREFLEVEL.Value=
"0",0,Fields!CostAMOUNT.Value),"DataSet1")
please see below my QUERY, can you please help and let me know what I did wrong in my exp
SELECT        PRODTABLE.PRODID, PRODCALCTRANS.COSTGROUPID, PRODTABLE.QTYCALC, PRODTABLE.PRODSTATUS, PRODCALCTRANS.COSTAMOUNT,
                         PRODCALCTRANS.COSTMARKUP, PRODCALCTRANS.REALCOSTAMOUNT, PRODCALCTRANS.CALCTYPE, PRODTABLE.DATAAREAID, PRODCALCTRANS.KEY3,
                         PRODCALCTRANS.CONSUMPVARIABLE, PRODCALCTRANS.REALCONSUMP, PRODTABLE.ITEMID, PRODTABLE.SCHEDDATE, PRODTABLE.FINISHEDDATE,
                         PRODCALCTRANS.KEY1, PRODCALCTRANS.TRANSDATE, PRODCALCTRANS.QTY, PRODCALCTRANS.KEY2, PRODCALCTRANS.COLLECTREFLEVEL,
                         PRODCALCTRANS.LINENUM
FROM            PRODTABLE INNER JOIN
                         PRODCALCTRANS ON PRODTABLE.PRODID = PRODCALCTRANS.PRODID AND PRODTABLE.DATAAREAID = PRODCALCTRANS.DATAAREAID
WHERE        (PRODTABLE.PRODSTATUS = 7) AND (PRODTABLE.DATAAREAID = N'AR1') AND (PRODTABLE.ITEMID = @itemid) AND
                         (PRODTABLE.FINISHEDDATE >= @Paramfromdate) AND (PRODTABLE.FINISHEDDATE <= @Paramtodate)

How to add the Match code object for the requisitioner field in TCODE ME51N

Hi,
How to add the search help (Match code object) for the requisitioner field in transaction ME51N.
Please do the needful to me.
Regards
Rajesh

don't you think that posting your question to a microsoft developer site would be more efficient?
regards,
anton

How to add the entries and how to delete the entries from custom Z-table?

Hi Experts,
My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
Here how to add the entries from program to Z-table.???
And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
Could you please guide me the logic how to crack this???
Let me know if you need more Info
Thanks
Sanju

Hi Sanjana,
What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
*Insert Statement
INSERT dbtab
Syntax
INSERT { {INTO target VALUES source }
| { target FROM source } }.
Effect
The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
System Fields
The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one row was inserted.
4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
The INSERT statement sets sy-dbcnt to the number of rows inserted.
Note
The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
*Modify Statement
MODIFY dbtab
Syntax
MODIFY target FROM source.
Effect
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
Note
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
Hope it helps...
P.S. Please award points if it helps...

How to add the property file..ie(default.properties) to a webdynpro project

Hi All,
How to add the property file..ie(default.properties) to a webdynpro project.
I urgently require the solution. Kindly get it for me.
Regards
DK

Hi DK,
this is described in the second Web Dynpro Java Tutorial
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/b1a3e990-0201-0010-aeb2-a2ef5bc3da8e">creating an Extended Web Dynpro Application</a>
Regards, Bertram

How to add the library of linphone into existing project ?

How to add the library of linphone into existing project ?

How to add the library of linphone into existing project ?

How to add the double headings in Alv Report.

Hi All,
Plz suggest me how to add the double headings in ALv Report.
Ram

Hi,
Try out this program....
REPORT ypm_historycard_rep.
TYPE-POOLS : slis.
DATA : it_cbm TYPE STANDARD TABLE OF mara.
DATA : it_layout TYPE STANDARD TABLE OF slis_layout_alv WITH HEADER LINE,
       wa_fcat TYPE slis_fieldcat_alv,
       it_fcat TYPE slis_t_fieldcat_alv.
START-OF-SELECTION.
SELECT *
FROM mara
INTO CORRESPONDING FIELDS OF TABLE it_cbm
where matnr = 'D80K7'.
END-OF-SELECTION.
it_layout-zebra = 'X'.
it_layout-colwidth_optimize = 'X'.
it_layout-f2code = '&ETA'.
APPEND it_layout.
DEFINE macro4fcat.
    wa_fcat-col_pos = &1.
    wa_fcat-fieldname = &2.
    wa_fcat-tabname = &3.
    wa_fcat-seltext_l = &4.
    append wa_fcat to it_fcat.
    clear wa_fcat.
END-OF-DEFINITION.
macro4fcat    '1' 'MATNR'         'IT_CBM'   'MATERIAL NO'    .
DESCRIBE TABLE it_cbm.
IF sy-ucomm = '&F03'.
    MESSAGE 'hi hello good morning "press enter button" this is quiz' TYPE 'S'.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program                = sy-repid
i_callback_html_top_of_page       = 'HTML_TOP_OF_PAGE'
is_layout                         = it_layout
it_fieldcat                       = it_fcat
   i_save                            = 'A'
TABLES
t_outtab                          = it_cbm
EXCEPTIONS
program_error                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form html_top_of_page
*       text
*      -->TOP        text
FORM html_top_of_page USING top TYPE REF TO cl_dd_document.
DATA: l_text(255) TYPE c.
DATA: text1(255) TYPE c.
DATA: t_header TYPE REF TO cl_dd_table_element ,
        wa_header TYPE REF TO cl_dd_table_area.
CALL METHOD top->add_gap
    EXPORTING
      width = 10.
CALL METHOD top->add_text
EXPORTING
    text          = 'hello'
    sap_style     = 'HEADING'
CALL METHOD top->add_gap
    EXPORTING
      width = 20.
CALL METHOD top->add_text
EXPORTING
    text          = 'HOW ARE YOU'
    sap_style     = 'HEADING'.
    CALL METHOD TOP->new_line
*      EXPORTING
*        repeat =
    CALL METHOD top->add_gap
    EXPORTING
      width = 50.
CALL METHOD top->add_text
EXPORTING
    text          = '____________________________________________________________'
    sap_style     = 'HEADING'.
    CALL METHOD TOP->new_line
*      EXPORTING
*        repeat =
    CALL METHOD top->add_gap
    EXPORTING
      width = 90.
CALL METHOD top->add_text
EXPORTING
    text          = 'YOU CAN TRY LIKE THIS'
    sap_style     = 'HEADING'.
ENDFORM.                    "html_top_of_page
Regards
Debarshi

How to add the report

how to add the report for jasper ,i am using jdeveloper tool to create project but how to add the report for the that project please help me

Make the broadcasting setting using BEx Broadcaster and schedule program RSRD_BROADCAST_STARTER in process chain for the required settings.
Regards,
Sree

How to add the Assignment column on this post outgoing payment in f-53

Hi all,
how to add the Assignment column on this post outgoing payment in f-53?
thanks.
Joo

Hi ,
If you want to see the assignment column in f-53 process open item screen
1. First in O7V3 check for t.code FBz2 which line layout ( 2 digit code is assigned)
2. Then in t.code O7z4s check in the line layout and if assignment field is not there then insert the field.
then check in F-53.
Hopw it will solve your problem.
Assign points if useful
Regards
Prabhat

How to add the Note board web part to a page with powershell

Hi everyone,
I've been looking around everywhere but haven't seen it explicitly mentioned.
Does anyone know how to add the Note Board web part to a Team Site page, e.g. Non-publishing site, Left Zone, First webpart in the zone in powershell?
Examples like this one http://adicodes.com/adding-web-part-to-page-with-powershell/ only talk about custom web parts uploaded from a local drive.
The example here looks good - http://spcrew.com/blogs/lists/posts/post.aspx?id=21 but is it for the Page Viewer Web Part. How would you go about getting the correct name for the note board web part and configuring it?
Many Thanks,
Ashley
function main(){
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
$url = "http://sp2010dev1/sites/test1"
$OpenWeb = Get-SPWeb $url
$OpenWeb
$OpenSite = Get-SPSite $url
$file = $OpenWeb.GetFile("http://sp2010dev1/sites/test1/SitePages/test1.aspx")
$WebPartManager = $file.GetLimitedWebPartManager([System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
Add-PageViewerWebPart "http://sp2010dev1/sites/test1" "http://sp2010dev1/sites/test1/SitePages/test1.aspx" "Body" 0 "SPCrew Site" "sp2010dev"
$OpenWeb.Dispose()
function Add-PageViewerWebPart($SiteURL, $pageUrl, $webpartzone, $index, $title, $content)
    $site = new-object Microsoft.SharePoint.SPSite($SiteURL)
    $web=$site.OpenWeb()
    $webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
    $webpart = new-object Microsoft.SharePoint.WebPartPages.PageViewerWebPart
    $webpart.ChromeType = [System.Web.UI.WebControls.WebParts.PartChromeType]::TitleOnly;
    $webpart.Title = $title
    $webpart.ContentLink = "http://www.spcrew.com";
    $webpartmanager.AddWebPart($webpart, $webpartzone, $index);
    $web.Close()
    $site.Close()
function Get-SPSite([string]$url) {
    New-Object Microsoft.SharePoint.SPSite($url)
function Get-SPWeb([string]$url) {
    $SPSite = Get-SPSite $url
    return $SPSite.OpenWeb()
    $SPSite.Dispose()

Hi,
According to your post, my understanding is that you wanted to add the Note board web part to a page with PowerShell.
The name of the Note Board web part is SocialCommentWebPart.
I recommend to use the powershell code below:
$pageUrl="http://sitename/SitePages/test.aspx"
$SiteURL="http://sitename"
$site = new-object Microsoft.SharePoint.SPSite($SiteURL)
$web=$site.OpenWeb()
$webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
$webpart = new-object Microsoft.SharePoint.Portal.WebControls.SocialCommentWebPart
$webpart.title="Note Board"
$webpartmanager.AddWebPart($webpart, "MiddleZone", 0);
$web.Close()
Then the Note board web part will be added to the page.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to add the actual figure alone the plotted line

Similar Messages

Maybe you are looking for