How to add the BexAnalyser as standard radio button to the add-ins?

HI All,
how to add the BexAnalyser as standard radio button to the add-ins.
Thanks
Vasu

What do you want to do? Pls give some more details.

Similar Messages

How to set the a graphic ( 3 radio buttons ) in the report ?

Hi Exports,
1. How to set the a graphic ( 3 radio buttons ) in the report ?
Acutely I want to fetch the record from MCHB-CLABS and MCHB-CSPEM , if the data read from MCHB-CLABS will show the green light otherwise if read from MCHB-CSPEM, it will show red light.
(e.g : if syntax error in report it is showing red light signal , like that how to set in report program)
Thanking you.
Subash

Hi,
In your internal table declaration, include yet another field for lights..
DATA: begin of itab,
           lights type light,
          end of itab.
DATA: GV_LAYOUT TYPE SLIS_LAYOUT_ALV.
GV_LAYOUT-LIGHTS_FIELDNAME = 'LIGHTS'.
Use the GV_LAYOUT in your FM to display the ALV.
IS_LAYOUT                         = GV_LAYOUT
If itab-lights = 1 => Error
itab-lights = 3 => Success
itab-lights =2 => Warning

How can I change the slide to 8 Radio buttons mutually exclusive?

How can I change the slide to 8 Radio buttons mutually exclusive?
I saw the example in Labview. but it only contains upto 5 radio
buttons. I need 8. How can I change it? Is there any shortcuts?

I made this with NI's radio button control found in the boolean palette. Just resize the cluster border, and move the buttons to where you want. To add a button, select one of them, hold down Control and Shift keys, then drag the button to a new location. The button gets duplicated. Do this until you have enough buttons.
Message Edited by tbob on 10-31-2005 01:07 PM
- tbob
Inventor of the WORM Global
Attachments:
RadioButtons.PNG ‏2 KB

How to handle exception thrown in standard bo method in the workflow design

Hi Experts
    how to handle exception thrown from standard bo method in the workflow design. For example, bo BUS2032, METHOD confirm. If the user cancel it, it will throw exception. In the workflow, how to catch this exception and add corresponding steps in the workflow.

@jrockman li
Try to implement the logic that what ever you are performing in the BO mehtod in a FM and in the FM you have tab with name EXECPTIONS define the execption in that tab.Now in the BO method you call this FM and if the exception occurs by using RAISE you can raise the exception in the FM and based on the number of exceptions your sy-subrc value will be set
so when sys-subrc is not eq 0 then pass a value back t the workflow container., I think this will work.
a sample Snippet for understanding purpose
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename         = <path>
    filetype         = 'ASC'
IMPORTING
    filelength       = lv_len
TABLES
    data_tab         = l_txt_tab
EXCEPTIONS
    file_write_error = 1          " If this Exception occurs
    invalid_type     = 2
    no_authority     = 3
    unknown_error    = 4
    OTHERS           = 10.
CASE sy-subrc.
WHEN 1. " SY-SUBRC value will be 1 then,
      " Pass or set the value back to the workflow conatiner element
ENDCASE.

How to differentiate between Radio Buttons with the same name?

My form has two fields, to which I gave the same name ("Radio Button 1.0") in order to achieve mutual exclusivity.
Now, I would like to use JavaScript to retrieve the value of one the two fields:
var checkMark = this.getField("Radio Button1.0");
if (checkMark.value == "Yes") {
Questions:
What is the proper way to inspect the value of a Radio Button? I have tried this:
if (checkMark.value == "No") [...]
but it doesn't seem to work.
How can I tell apart 2 radio buttons with the same name?
TIA,
-RFH

When Radio Buttons and Check Boxes are unchecked their value is "Off", so if you have "Yes", "No" buttons you will also encounter an 'Off" value. Now if you want to look at a given button, you will have to use the "isBoxChecked(nWidget)" method.
nWidget:
The 0-based index of an individual radiobutton or checkbox widget for this field. The index is determined by the order in which the individual widgets of this field were created (and is unaffected by tab-order).
Every entry in the Fields panel has a suffix giving this index, for example MyField #0.
Returns
true if the specified widget is currently checked, false otherwise.
Example
var f = this.getField("ChkBox");
if(f.isBoxChecked(0))
app.alert("The Box is Checked");
else
app.alert("The Box is not Checked");

I updated my iOS to 7 yesterday. But my music app doesn't show the 'Radio' button as the online videos and Apple website claims. What could be the reason and how to fix it. All other apps, swipe up/down seem to be working fine.

I updated my iOS to 7 yesterday. But my music app doesn't show the 'Radio' button as the online videos and Apple website claims. What could be the reason and how to fix it. All other apps, swipe up/down seem to be working fine.

Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do

Trying to create multiple lines of radio buttons on the same page. how do i do that??

Greetings. I'm brand new to this, and am trying to create a form with multiple lines of radio buttons on a single page to send to my students. How can I do this?? I currently have a table that I want the students to fill out and return, but every time I put radio buttons in, the form only allows selection of one of the 12 - I want students to be able to select one on each row.........

Each group of three radio buttons for a row should have the same field name and different "Radio Button Choice" (see Options tab). So if you copy & paste the first row, be sure to rename the new ly added radio buttons.

How to set the value of an radio button using set_radio_button_property

I'd like to set the value of an radio button dynamically, depending of the situation.
(=> the value which the object returns to the radio group)
Means: the 'radio button value' of my object 'rb_1' shall be 1, in other circumstances 99 and so on.
Is it possible to set this value at runtime ?

the problem is as Gerd wrote:
there are two or more radio buttons in an option group.
Their value depends on the text objext t_field.
If t_field is "car" the value of radio button 1 shall be 75, button 2: 90 and button 3 115.
if t_field is "bus" the value of radio button 1 shall be 250, button 2: 275 and button 3 300 and so on.
My problem is to set the value of the radio buttons at runtime after choosing/typing the value of the text field t_field.
Message was edited by:
PatrickM

How to get the items of a radio button under each other?

I want to place the items of a radio button : selectOneRadio under each other, but it doesn't work..
The code I am using is :
                                             <h:panelGrid columns="1" cellspacing="0" cellpadding="2"
                                                  border="0" styleClass="subitems">
                                                  <h:selectOneRadio value="#{travelerDataBean.travelParty}" >
                                                            <f:selectItems value="#{travelerDataBean.travelParties}" />
                                                  </h:selectOneRadio>
                                             </h:panelGrid>
Can someone help me?
Thanks

Use-
.............layout="pageDirection"....................-- raju

How to change the "Address is Residential" radio button to default "off"

Hello, I am attempting to set the "Address is Residential" radio button under UPS shipping option to default "off". Our company sells mainly to business locations, and the button is causing confusion and incorrect shipping rates with our customers. Sorry if this has been covered before, I have seen a few discussions when googling the topic, however their links are not working.
Thanks!

Hi,
The option cannot be changed but a possible workaround to avoid client confusion is to hide this div, using some custom JavaScript script that will hide it after is rendered by the shipping option tag.
Unfortunately I do not have the exact script but will leave this topic open for the community to assist if possible.
Kind regards,
-Sidney

Deselect radio buttons except the one that execute change

Hey!
Im curious how to improve this code;
if(this.rawValue == true){
     radiobtn1.rawValue = 0;
     radiobtn2.rawValue = 0;
     radiobtn3.rawValue = 0;
into a function that unchecks all radio buttons except the one that you checked as true.
Thank you!

I put radio buttons on the stage drag-and-drop style, rather
than have them generated at runtime, and no I don't have any code
to remove previous instances. I'll try adding code to add and
remove those as the script runs and see what I come up with. I'm
still an incredible newbie, so even though I know what I want to
happen it takes me a while to figure out how to code it.

How can I display choice type as radio button ?

HI,
I used SPD 2013 to create a workflow , action --- collect date from user .
I created one choice type item , but display style only drop down list and check box .
How can I do to display as radio button?
And other question , I don't want to display delete ITEM in this page . how can I do it ?
Thanks a lot

Hi,
According to your description, my understanding is that you want to change the drop down list control to radio button control in the task form.
I suggest you can use InfoPath to change the control to radio button like below:
For hiding "Delete Item" action in the task form, I suggest you can add the Jquery to the PlaceHolderMain tag of "WrkTaskIP.aspx" within layouts folder path:
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\TEMPLATE\LAYOUTS\WrkTaskIP.aspx
More information:
Jquery Hide
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Standard Radio Button Tabs missing in Material Master

Dear Experets,
We have Upgraded from 4.5 to Ecc 6.0. We are finding an issue in Material Master.
When we create a material with the required selected Views and maintaing the datas like Basic Data and other Views, we usually have standard Radio button Tab to shift over from one View to another View. I am not able to find those Views either in Creation of Material Master, Or Change or Display ?
Can any one suggest on this? Is there any Patch is missing or any configuration setting has to be carried out ?
Please Suggest your valuable inputs.
Best Regards
Javeed
Edited by: JAVEED AHAMED on Apr 29, 2010 10:40 AM

Hi,
Check sap note 107404.
Regards
Ankur

Report should executed based on the radio buttons on the selection screen

Hi everyone,
Greets....................
My scenario is I have 2 selection screen blocks on same screen..
One selection screen block contains input parameters as follows
Company Code - S_BUKRS
Business Area - S_GSBER
Customer Code - S_KUNNR
Fiscal Area -   S_GJAHR
GL Account - S_HKONT
Posting Date -S_ZFBDT
Ledger Type -P_RLDNR
Open Item Key Date - P_ZFBDT
Another selection screen block contains 2 radio buttons with the option as follows
Collection Plan
*Credit days summary.
If i click Collection plan the report output should come based on the input parameters in first selection-screen block.
If i click Credit days summary the report output should come based on the input parameters in first selection-screen block.
Pls send me the sample code for this.
Thanks in Advance
Regards
Raj kumar

See the below folling example : it will have radio buttons and depends on radio button it will show output.
REPORT ZPPR_BOM_INFOL_REPORT no standard page heading
                 line-size 160
                 line-count 60.
======================================================================
Program Name : ZPPR_BOM_INFOL_REPORT
Description : This Program would be used for BOM List for a material*
               and the component's where used list                   *
Author       : Seshu                                                 *
Date         : 07/24/2006                                            *
MODIFICATION HISTORY                                                 *
DATE    | AUTHOR   | CHANGE #   | DESCRIPTION OF MODIFICATION        *
|----
|----
|----
*12/04/06 | Seshu    | DEVK921821 | Removed new page for each material *
======================================================================
Table definition                                                    *
TABLES: mast,
        stko,
        stpo,
        T418,
        makt.
TYPE - POOLS
TYPE-POOLS: slis.
Constants
constants : c_tcode(4) type c value 'CS03',
            gc_formname_top_of_page TYPE slis_formname
            VALUE 'TOP_OF_PAGE'.
Variables
data : v_maktx like makt-maktx,
       wa_stko like stko.
DATA:
Objekttyp 'Material'
   otyp_mat(1) TYPE c VALUE '1',
   ootyp_mat(1) TYPE c VALUE 'M',
Objekttyp 'kein Objekt'
   otyp_noo(1) TYPE c VALUE '2',
Objekttyp 'Dokument'
   otyp_doc(1) TYPE c VALUE '3',
Objekttyp 'Klasse'
   otyp_kla(1) TYPE c VALUE '4',
Objekttyp 'Intramaterial'
   otyp_ntm(1) TYPE c VALUE '5'.
maximal anzeigbare Menge
data:   max_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999',
        ueberl_kz(1) TYPE c VALUE '*',
        min_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999-',
        b_flag(1) TYPE c VALUE 'X',
        ecfld(250) TYPE c,
        v_flag type c.
ALV Variables
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
      gs_layout   TYPE slis_layout_alv,
      gs_keyinfo TYPE slis_keyinfo_alv,
      gt_sp_group TYPE slis_t_sp_group_alv,
      gt_events   TYPE slis_t_event.
DATA: g_repid LIKE sy-repid.
DATA: gt_list_top_of_page TYPE slis_t_listheader,
            g_tabname_header TYPE slis_tabname,
            g_tabname_item   TYPE slis_tabname,
            g_save(1) TYPE c,
            gx_variant LIKE disvariant,
            g_variant LIKE disvariant,
            g_default(1) TYPE c,
            g_exit(1) TYPE c.
Includes                                                             *
INCLUDE .
Internal Table Declaration                                           *
DATA: t_mast LIKE STANDARD TABLE OF mast WITH HEADER LINE.
*DATA: t_makt LIKE STANDARD TABLE OF makt WITH HEADER LINE.
BOM Function module Related
DATA: t_matcat LIKE cscmat OCCURS 0 WITH HEADER LINE.
Internal Table for Level by Level Function module
DATA: t_stb LIKE stpox OCCURS 0 WITH HEADER LINE.
Get the Relevant data from FM
DATA: BEGIN OF hd_tab OCCURS 0,
         stufe LIKE stpox-stufe,
         vwegx LIKE stpox-vwegx,
      END OF hd_tab.
Final Output
DATA: BEGIN OF alv_stb OCCURS 0.
        INCLUDE STRUCTURE stpox_alv.
DATA:   info(3)   TYPE c,
      END OF alv_stb.
DATA: BEGIN OF stb_orig.
        INCLUDE STRUCTURE stpox.
DATA: END OF stb_orig.
DATA: BEGIN OF stb_add.
        INCLUDE STRUCTURE stpol_add.
DATA: END OF stb_add.
Internal Table for STPO
*-- BOM Line item
TYPES: BEGIN OF ty_stpo,
       stlty TYPE stpo-stlty,
       stlnr TYPE stpo-stlnr,
       stlkn TYPE stpo-stlkn,
       stpoz TYPE stpo-stpoz,
       idnrk TYPE stpo-idnrk,
       meins TYPE stpo-meins,
       menge TYPE stpo-menge, "Component Qty
       END OF ty_stpo.
DATA: t_stpo TYPE STANDARD TABLE OF ty_stpo WITH HEADER LINE.
*-- BOM Header
TYPES: BEGIN OF ty_stko,
       stlty TYPE stko-stlty,
       stlnr TYPE stko-stlnr,
       stlal TYPE stko-stlal,
       stkoz TYPE stko-stkoz,
       bmein TYPE stko-bmein,
       bmeng TYPE stko-bmeng,
       END OF ty_stko.
DATA: t_stko TYPE STANDARD TABLE OF ty_stko WITH HEADER LINE .
data : t_makt like makt occurs 0 with header line.
DATA: BEGIN OF cl_clstab OCCURS 0,                          "YHG079407
         class LIKE klah-class,                             "YHG079407
         klart LIKE klah-klart,                             "YHG079407
         chked LIKE csdata-xfeld,                           "YHG079407
         noobj LIKE csdata-xfeld,                           "YHG079407
         dsply LIKE csdata-xfeld,                           "YHG079407
      END OF cl_clstab.
*-- Header table
TYPES: BEGIN OF ty_main_material,
       matnr TYPE mast-matnr, "Material
       werks TYPE mast-werks, "Plant
       maktx TYPE makt-maktx, "Description
       stlal TYPE mast-stlal, "Alternative BOM
       stlnr TYPE stko-stlnr, "BOM Number
       bmein TYPE stko-bmein, "UOM
       bmeng TYPE stko-bmeng, "Base Qty
       expand(1) TYPE c,      "Expanding Field
       END OF ty_main_material.
DATA: t_main_material TYPE STANDARD TABLE OF ty_main_material WITH
      HEADER LINE.
*-- Item (Component) Table
TYPES: BEGIN OF ty_item_material,
       matnr TYPE mast-matnr, "Material
       werks TYPE mast-werks, "Plant
       idnrk TYPE stpo-idnrk, "Component (Material)
       maktx TYPE makt-maktx, "Description
       stlal TYPE mast-stlal, "Alternative BOM
       stlnr TYPE stpo-stlnr, "BOM Number
       meins TYPE stpo-meins, "UOM
       menge TYPE stpo-menge, "Base Qty
       END OF ty_item_material.
DATA: t_item_material TYPE STANDARD TABLE OF ty_item_material WITH
      HEADER LINE.
Selection Screen                                                     *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_werks LIKE marc-werks DEFAULT '1000' OBLIGATORY.
SELECT-OPTIONS s_stlal FOR mast-stlal .
SELECT-OPTIONS s_stlan FOR mast-stlan DEFAULT '1'.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bomlst RADIOBUTTON GROUP g1 DEFAULT 'X'.
SELECT-OPTIONS s_matnr FOR mast-matnr.
SELECTION-SCREEN SKIP.
PARAMETERS: p_compon RADIOBUTTON GROUP g1.
SELECT-OPTIONS: s_idnrk FOR stpo-idnrk.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
selection-screen begin of block b03 with frame title text-b03.
selection-screen begin of line.
selection-screen comment 1(40) text-005.
parameters: p_all radiobutton group r1 default 'X'.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(40) text-006.
parameters: p_one radiobutton group r1 .
selection-screen end of line.
selection-screen end of block b03.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK b3.
At slection screen events                                            *
*-- Process on value request
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
Intitialisation
INITIALIZATION.
g_repid = sy-repid.
g_tabname_header = 'T_MAIN_MATERIAL'.
g_tabname_item   = 'T_ITEM_MATERIAL'.
*-- define keyinformation
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'MATNR'.
gs_keyinfo-item01   = 'MATNR'.
PERFORM e03_eventtab_build USING gt_events[].
PERFORM e04_comment_build USING gt_list_top_of_page[].
PERFORM e07_sp_group_build USING gt_sp_group[].
PERFORM e08_layout_build   USING gs_layout.
Set Options: save variants userspecific or general
g_save = 'A'.
PERFORM variant_init.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
       EXPORTING
            i_save     = g_save
       CHANGING
            cs_variant = gx_variant
       EXCEPTIONS
            not_found = 2.
IF sy-subrc = 0.
    p_vari = gx_variant-variant.
ENDIF.
S T A R T - O F - S E L E C T I O N *******************
start-of-selection.
if p_all = 'X'.
Get the data from MAST and MAKT Table
    if p_bomlst = 'X'.
Get the data Based On Material #
      perform get_data.
    else.
Get the data Based On Component
      perform get_data_component.
    endif.
else.
Get the Single Level Report
*-- Moved the fiedl catalog here inorder to change the layout based on
*-- Selection
    PERFORM e01_fieldcat_init USING gt_fieldcat[].
    PERFORM select_data.
endif.
E N D - O F - S E L E C T I O N *******************
end-of-selection.
if p_one = 'X'.
    perform alv.
endif.
User Command
at line-selection.
Interactive to CS03 Transaction
case sy-ucomm.
    when 'PICK' or 'F2'.
      if not alv_stb-idnrk is initial .
        if not alv_stb-werks is initial.
          if not alv_stb-objty is initial.
            SET PARAMETER ID 'MAT' FIELD alv_stb-idnrk.
            SET PARAMETER ID 'WRK' FIELD alv_stb-werks.
            SET PARAMETER ID 'CSV' FIELD alv_stb-OBJTY.
            call transaction c_tcode and skip first screen.
          endif.
        endif.
      endif.
      clear alv_stb.
endcase.
*&      Form get_data
      Get data from MAST and MAKT Table
FORM get_data.
data : wa_lines type sy-index.
REFRESH : T_MAST,
            t_STB,
            t_MATCAT,
            alv_STB.
CLEAR : T_MAST,
            t_STB,
            t_MATCAT,
            alv_STB.
Get the data from MAST Table
Get all the information from MAST - BOM Table
SELECT * FROM mast INTO TABLE t_mast WHERE matnr IN s_matnr AND
                                             werks = p_werks AND
                                             stlan IN s_stlan AND
                                             stlal IN s_stlal.
describe table t_mast lines wa_lines.
if wa_lines is initial.
    Write:/2 'List contains no data'.
    stop.
endif.
loop at t_mast.
    clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
    if sy-tabix ne 1.
      skip 1.
    endif.
End of Change Seshu
Get the material Description
    select single maktx from makt into v_maktx
                             where matnr = t_mast-matnr
                             and   spras = 'E'.
Get the material details from STKO Table
    select single * from stko into wa_stko
                    where STLTY = 'M'
                    and   STLNR = t_mast-stlnr
                    and   STLAL = t_mast-stlal.
Main Header for Each Material
    format color 5 on.
    write:/2 'Material',20 'Material Description',65 'Alternative BOM',
         90 'Base Qty', 115 'Base Unit'.
    format color 5 off.
    format color 1 on.
    write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
           115 wa_stko-BMEIN.
    format color 1 off.
Use the Function Module and get the format level by level
    perform get_level_level.
endloop.
ENDFORM.                    " get_data
Top of page                                                  *
top-of-page.
perform report_header .
*&      Form report_header
      text
--> p1        text
<-- p2        text
FORM report_header.
new-page line-size 160 .
format color col_heading intensified on.
write:/ sy-uline(160) .
*--- Write Company Name.
perform calc_col_and_write using    text-h00
                                      sy-linsz.
*--- Write Report Title.
perform calc_col_and_write using    sy-title
                                      sy-linsz.
*--- Write User Id, Date / Time, Program Id, Page etc.
perform write_other_hdr_details.
write:/ sy-uline(160) .
ENDFORM.                    " report_header
*&      Form calc_col_and_write
      text
     -->P_TEXT_H00 text
     -->P_SY_LINSZ text
FORM calc_col_and_write USING    P_TEXT
                                 P_LINSZ.
data: col1 type i,
         col2 type i,
          len type i,
          str type i.
str = strlen( p_text ).
col1 = ( p_linsz / 2 ) - ( str / 2 ) .
len = p_linsz - col1 - 2.
write: at /1 '|'.
write: at col1 p_text,
         at sy-colno(len) space.
write at 160 '|'.
ENDFORM.                    " calc_col_and_write
*&      Form write_other_hdr_details
      text
--> p1        text
<-- p2        text
FORM write_other_hdr_details.
data: col1 type i,
          col2 type i,
          len type i.
col1 = 3.
write:/1 '|'.
write: at col1 'UserId : ',
                  sy-uname.
len = sy-linsz - 1.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Date: ',
                 sy-datum mm/dd/yyyy.
write: at sy-linsz '|'.
write:/1 '|'.
write: at col1 'ReportId: ',
                  sy-repid.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Page: ',
                  sy-pagno.
write: at sy-linsz '|'.
ENDFORM.                    " write_other_hdr_details
*&      Form get_data_component
      Get the data based on Component level
FORM get_data_component.
data wa_lines type i.
*-- Get the BOM item details
SELECT stlty stlnr stlkn stpoz idnrk meins menge
          FROM stpo
          INTO TABLE t_stpo
WHERE   idnrk IN s_idnrk.
IF sy-subrc = 0.
    CLEAR wa_lines.
    DESCRIBE TABLE t_stpo LINES wa_lines.
    IF wa_lines > 0.
      SELECT stlty stlnr stlal stkoz bmein bmeng
              FROM stko
              INTO TABLE t_stko
              FOR ALL ENTRIES IN t_stpo
      WHERE stlnr = t_stpo-stlnr.
      CLEAR wa_lines.
      DELETE ADJACENT DUPLICATES FROM t_stko COMPARING ALL FIELDS.
      DESCRIBE TABLE t_stko LINES wa_lines.
      IF wa_lines > 0.
*-- Get the BOM item details
        SELECT * FROM mast INTO TABLE t_mast FOR ALL ENTRIES IN t_stko
                                            WHERE werks = p_werks AND
                                              stlnr = t_stko-stlnr
                                              and stlal in s_stlal.
      ENDIF.
    ENDIF.
else.
    Write:/2 'List contains no data'.
    stop.
endif.
loop at t_mast.
    clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
    if sy-tabix ne 1.
      skip 1.
    endif.
End of change    Seshu
Get the material Description
    select single maktx from makt into v_maktx
                             where matnr = t_mast-matnr
                             and   spras = 'E'.
Get the material details from STKO Table
    select single * from stko into wa_stko
                    where STLTY = 'M'
                    and   STLNR = t_mast-stlnr
                    and   STLAL = t_mast-stlal.
Main Header for Each Material
    format color 5 on.
    write:/2 'Material',20 'Material Description',65 'Alternative BOM',
         90 'Base Qty', 115 'Base Unit'.
    format color 5 off.
    format color 1 on.
    write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
           115 wa_stko-BMEIN.
    format color 1 off.
Use the Function Module and get the format level by level
    perform get_level_level.
    clear : t_mast.
endloop.
ENDFORM.                    " get_data_component
*&      Form obj_ident
      text
FORM obj_ident.
weder Mat noch Doc
CHECK: T_stb-objty NE otyp_mat,
         T_stb-objty NE ootyp_mat,
         T_stb-objty NE otyp_doc,
         T_stb-objty NE otyp_ntm.
?T418-WA schon ok
nein
IF T_stb-postp NE t418-postp.
    T418 einlesen
    PERFORM t418_lesen USING T_stb-postp.
ENDIF.
PERFORM cl_clstab_maint.
?MatNr-Eingabe bei diesem PosTyp moeglich
und keine Textposition
trifft zu
IF     t418-matin NE '-'
     AND t418-txpos IS INITIAL.
    aktuelles Objekt ist Material NLAG
    T_stb-objty = '1'.
    PosKurztext in ObjKurztext uebernehmen.
    T_stb-ojtxp = T_stb-potx1.
    MODIFY T_stb.
ELSE.
    IF T_stb-objty IS INITIAL.
      T_stb-objty = '2'.
      MODIFY T_stb.
    ENDIF.
ENDIF.
ENDFORM.                    " obj_ident
*&      Form t418_lesen
      text
     -->P_T_STB_POSTP text
FORM t418_lesen USING   lkl_postp LIKE stpo-postp.
T418-WA initialisieren
CLEAR:
     t418.
Key angeben
t418-postp = lkl_postp.
PosTypDefinition lesen
READ TABLE t418.
ENDFORM.                    " t418_lesen
*&      Form cl_clstab_maint
      text
FORM cl_clstab_maint.
nur fuer Klassenpositionen
CHECK t_STB-OBJTY EQ OTYP_KLA.
Teilkey der Klassenpositionentabelle
CL_CLSTAB-CLASS = t_STB-CLASS.
CL_CLSTAB-KLART = t_STB-KLART.
Klassenpositionentabelle lesen
READ TABLE CL_CLSTAB
     WITH KEY CL_CLSTAB(21)
     BINARY SEARCH.
aktuelle Klassenposition bereits in Klassenpositionentabelle
nein
IF SY-SUBRC <> 0.
    Klassenposition in Klassenpositionentabelle hinzufuegen
    INSERT CL_CLSTAB INDEX SY-TABIX.
ENDIF.
ENDFORM.                    " cl_clstab_maint
*&      Form alv_stb_prep
      Printing the data as LEVEL BY LEVEL
FORM alv_stb_prep.
CLEAR:
      alv_stb,
      stb_orig,
      stb_add.
IF t_stb-hdnfo IS INITIAL.
    stb_orig = t_stb.
    IF t_stb-mngko >= max_num.
      stb_add-ovfls = ueberl_kz.
    ELSE.
      IF t_stb-mngko <= min_num.
        stb_add-ovfls = ueberl_kz.
      ELSE.
        CLEAR: stb_add-ovfls.
      ENDIF.
    ENDIF.
    IF NOT t_stb-xtlnr IS INITIAL.
      stb_add-bomfl = b_flag.
    ENDIF.
    IF    NOT t_stb-knobj IS INITIAL
       OR NOT t_stb-class IS INITIAL
       OR NOT t_stb-kzclb IS INITIAL.
      stb_add-knofl = 'X'.
    ENDIF.
ELSE.
    CHECK t_stb-stufe > 1.
    alv_stb-info = 'C30'.
    IF t_stb-ttidx <> t_matcat-index.
      READ TABLE t_matcat INDEX t_stb-ttidx.
    ENDIF.
    stb_orig-hdnfo = t_stb-hdnfo.
    stb_orig-stufe = t_stb-stufe - 1 .
    stb_orig-ojtxp = t_stb-ojtxb.
    IF NOT t_stb-altst IS INITIAL.
      stb_orig-stlal = t_stb-stlal.
      IF stb_orig-stlal(1) EQ '0'.
        stb_orig-stlal(1) = ' '.
      ENDIF.
    ENDIF.
    stb_orig-idnrk = t_matcat-matnr.
ENDIF.
CLEAR:
    stb_add-dobjt,
    stb_add-objic.
CASE t_stb-objty.
    WHEN otyp_mat.
      WRITE: stb_orig-idnrk TO ecfld.
      stb_add-objic = '@A6@'.
    WHEN 'M'.
      WRITE: stb_orig-idnrk TO ecfld.
      stb_add-objic = '@A6@'.
    WHEN otyp_noo.
      WRITE: stb_orig-potx1 TO ecfld.
      stb_add-objic = '@0Q@'.
    WHEN otyp_doc.
      write stb_orig-doknr to ecfld.                        "note 489354
      IF ecfld CP '*# '. ENDIF.                             "note 489354
      sy-fdpos = sy-fdpos + 1.                              "note 489354
      CONCATENATE
*d      stb_orig-doknr                                      "note 489354
        stb_orig-dokar
        stb_orig-doktl
        stb_orig-dokvr
*d      INTO ecfld                                          "note 489354
        INTO ecfld+sy-fdpos                                 "note 489354
        SEPARATED BY space.
      stb_add-objic = '@AR@'.
    WHEN otyp_kla.
      CONCATENATE
        stb_orig-class
        stb_orig-klart
        INTO ecfld
        SEPARATED BY space.
      stb_add-objic = '@7C@'.
    WHEN otyp_ntm.
      WRITE: stb_orig-intrm TO ecfld.
    WHEN OTHERS.
ENDCASE.
*d CONDENSE ecfld.                                          "note 515408
stb_add-dobjt = ecfld(40).
CLEAR: ecfld.
WRITE stb_orig-stufe TO stb_add-dstuf NO-SIGN.
*d MOVE-CORRESPONDING stb_orig TO alv_stb.                 "note 331962
MOVE-CORRESPONDING stb_add TO alv_stb.
MOVE-CORRESPONDING stb_orig TO alv_stb.                   "note 331962
APPEND alv_stb.
ENDFORM.                    " alv_stb_prep
*&      Form get_level_level
      text
FORM get_level_level.
REFRESH : T_STB,
            T_MATCAT,
            ALV_STB.
CLEAR : T_STB,
          T_MATCAT,
          ALV_STB.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
       EXPORTING
            capid                 = 'PP01'
            datuv                 = sy-datum
            mktls                 = 'X'
            mehrs                 = 'X'
            mtnrv                 = t_mast-matnr
            stlal                 = '01'
            stlan                 = '1'
            stpst                 = 0
            svwvo                 = 'X'
            werks                 = p_werks
            vrsvo                 = 'X'
       TABLES
            stb                   = t_stb
            matcat                = t_matcat
       EXCEPTIONS
            alt_not_found         = 1
            call_invalid          = 2
            material_not_found    = 3
            missing_authorization = 4
            no_bom_found          = 5
            no_plant_data         = 6
            no_suitable_bom_found = 7
            conversion_error      = 8
            OTHERS                = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR: hd_tab.
        Entry der KlassenstatusTab. initialisieren
         cl_clstab,
        Entry 'Objekte von Klassen' initialisieren
         cl_objmemo.
REFRESH: hd_tab.
SORT t_matcat BY index ASCENDING.
Get the All levels
loop at t_stb.
    IF NOT t_stb-hdnfo IS INITIAL.
      EXIT.
    ENDIF.
Object Identification
    PERFORM obj_ident.
    READ TABLE hd_tab
        WITH KEY stufe = t_stb-stufe
                 vwegx = t_stb-vwegx
        BINARY SEARCH
        TRANSPORTING NO FIELDS.
    ?gibt es diesen Satz schon
    nein
    IF sy-subrc <> 0.
       dann in SFP-Infosatzverweistab. aufnehmen
*d       APPEND HD_TAB.                                       "HGH054648
      hd_tab-stufe = t_stb-stufe.
                                                            "HGH054648
      hd_tab-vwegx = t_stb-vwegx.
                                                            "HGH054648
      INSERT hd_tab                                         "HGH054648
        INTO hd_tab                                         "HGH054648
        INDEX sy-tabix.                                     "HGH054648
       PosNr initialisieren
      CLEAR: t_stb-posnr.
       SFP-InfosatzKz setzen
      t_stb-hdnfo = 'X'.
        stb-objty = otyp_mat.
                                                            "HGE246532
       als SFP-Infosatz in die STB aufnehmen
      append t_stb.
    ENDIF.
*del ENDIF.
    clear t_stb.
endloop.
SORT t_stb ASCENDING BY stufe
              index ASCENDING
*del        POSNR ASCENDING.                                  "HGC062735
              posnr ASCENDING                               "HGC062735
              hdnfo DESCENDING.
LOOP AT t_stb.
    T_stb-index = sy-tabix.
    MODIFY T_stb.
    PERFORM alv_stb_prep.
ENDLOOP.
Displays the Value as Level by Level
loop at ALV_stb.
    if sy-tabix = 1.
      format color 3 on.
      write:/2 'Level',12 'Item',22 'Component',
      42 'Material Description',82 'Base Qty',
      107 'Base Unit',120 'Assembly Indicator'.
      format color 3 on.
    endif.
    if alv_stb-MEINs is initial.
      v_flag = 'X'.
    endif.
    if v_flag = 'X'.
      format color 5 on.
      write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
             42 alv_stb-OJTXP.
      format color 1 off.
    else.
      if alv_stb-STUFE = '1'.
        format color 1 on.
        write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
               42 alv_stb-OJTXP,72 alv_stb-mngko,
               107 alv_stb-MEINs, 120 alv_stb-bomfl .
        format color 1 off.
      elseif alv_stb-STUFE = '2'.
        format color 2 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
               42 alv_stb-OJTXP,72 alv_stb-mngko,
               107 alv_stb-MEINs,120 alv_stb-bomfl.
        format color 2 off.
      elseif alv_stb-STUFE = '3'.
        format color 3 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
                42 alv_stb-OJTXP,72 alv_stb-mngko,
                107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 3 off.
      elseif alv_stb-STUFE = '4'.
        format color 4 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
                42 alv_stb-OJTXP,72 alv_stb-mngko,
                107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 4 off.
      elseif alv_stb-STUFE = '5'.
        format color 5 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
                42 alv_stb-OJTXP,72 alv_stb-mngko,
                107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 5 off.
      elseif alv_stb-STUFE = '6'.
        format color 7 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
               42 alv_stb-OJTXP,72 alv_stb-mngko,
               107 alv_stb-MEINs,120 alv_stb-bomfl.
        format color 6 off.
      elseif alv_stb-STUFE = '7'.
        format color 7 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
               42 alv_stb-OJTXP,72 alv_stb-mngko,
               107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 7 off.
      else.
        format color 1 on.
        write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
                42 alv_stb-OJTXP,72 alv_stb-mngko,
                107 alv_stb-MEINs,120 alv_stb-bomfl .
        format color 1 off.
      endif.
    endif.
    hide: alv_stb.
    clear : alv_stb.
    clear v_flag.
endloop.
ENDFORM.                    " get_level_level
*&      Form f4_for_variant
      text
FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
         EXPORTING
              is_variant          = g_variant
              i_save              = g_save
              i_tabname_header    = g_tabname_header
              i_tabname_item      = g_tabname_item
          it_default_fieldcat =
         IMPORTING
              e_exit              = g_exit
              es_variant          = gx_variant
         EXCEPTIONS
              not_found = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S'      NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF g_exit = space.
      p_vari = gx_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                    " f4_for_variant
      FORM E03_EVENTTAB_BUILD                                       *
--> E03_LT_EVENTS                                                 *
FORM e03_eventtab_build USING e03_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
            i_list_type = 0
       IMPORTING
            et_events   = e03_lt_events.
READ TABLE e03_lt_events WITH KEY name = slis_ev_top_of_page
                           INTO ls_event.
IF sy-subrc = 0.
    MOVE gc_formname_top_of_page TO ls_event-form.
    APPEND ls_event TO e03_lt_events.
ENDIF.
ENDFORM.
      FORM E04_COMMENT_BUILD                                        *
--> E04_LT_TOP_OF_PAGE

Changing the Selection Screen on the selection of a radio button

Hi experts,
I am stuck with a situation here.
I have a selection screen with 2 blocks.
The first block contains 5 radio buttons.
The second block contains 7 select options fields.
Now i want to show different select options when the user selects different radio buttons.
For example, when the user selects radio button 1, select options 1, 2, 3, 4, and 5 should be shown.
When the user selects radio button2, select options 3, 4, 5, 6, and 7 should be shown.
How do i go about implementing this????
I guess i need to do the coding in event "AT SELECTION-SCREEN OUTPUT".
Should i use MODIF ID????
Please help.
Points will be awarded.
Thanks and Regards
Gaurav Kumar Raghav

Use AT SELECTION-SCREEN
not AT SELECTION-SCREEN OUTPUT.
cause output addition makes it a PBO not PAI
check ur requirement & use the events accordingly
group all select options under one group which you want to show on selection of radio button
under AT SELECTION-SCREEN
loop at screen and change the property "ACTIVE (0/1)" for the group you want
& don't forget to modify screen table in the end.
one more thing u should do is use addition USER-COMMAND with your radio buttons.
PARAMETERS : r1 RADIOBUTTON GROUP r1 USER-COMMAND f1,
             r2 RADIOBUTTON GROUP r1.
PARAMETERS : p1 TYPE c MODIF ID a,
             p2 TYPE c MODIF ID b.
AT SELECTION-SCREEN . " output
LOOP AT SCREEN .
    IF r2 = 'X' AND screen-name = 'P1'.
      screen-active = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Edited by: mrugesh phatak on Oct 8, 2008 11:00 AM

How to add the BexAnalyser as standard radio button to the add-ins?

Similar Messages

Maybe you are looking for