How to add the border to full page

Here has the problem about adding the border to full page. How can I fix it?
The border is added as below.
However, the border is
disappear when it comes to print page.
Thanks!

Hi,
It seems you are using Word 2013, if not, feel free to correct me.
I actually tested on my Word 2013 but couldn't reproduce this issue. If I added the border to a page, the print preview displayed the border as expected.
Is this issue reproduceable with another document? If so, please exit Word and try to find the Normal.dotm template, rename it to .old, thus Word shall generate a new one the next time it starts.
Normal.dotm is the template upon which all new blank documents are based. It opens whenever you start Microsoft Office Word 2013 and it includes default styles and customizations that control the basic look of your document. Changes you make to Normal.dotm
will be applied to documents that you create in the future.
To find the Normal.dotm file, navigate to C:\Users\username\AppData\Roaming\Microsoft\Templates.
Hope it helps.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Similar Messages

How to add the Note board web part to a page with powershell

Hi everyone,
I've been looking around everywhere but haven't seen it explicitly mentioned.
Does anyone know how to add the Note Board web part to a Team Site page, e.g. Non-publishing site, Left Zone, First webpart in the zone in powershell?
Examples like this one http://adicodes.com/adding-web-part-to-page-with-powershell/ only talk about custom web parts uploaded from a local drive.
The example here looks good - http://spcrew.com/blogs/lists/posts/post.aspx?id=21 but is it for the Page Viewer Web Part. How would you go about getting the correct name for the note board web part and configuring it?
Many Thanks,
Ashley
function main(){
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
$url = "http://sp2010dev1/sites/test1"
$OpenWeb = Get-SPWeb $url
$OpenWeb
$OpenSite = Get-SPSite $url
$file = $OpenWeb.GetFile("http://sp2010dev1/sites/test1/SitePages/test1.aspx")
$WebPartManager = $file.GetLimitedWebPartManager([System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
Add-PageViewerWebPart "http://sp2010dev1/sites/test1" "http://sp2010dev1/sites/test1/SitePages/test1.aspx" "Body" 0 "SPCrew Site" "sp2010dev"
$OpenWeb.Dispose()
function Add-PageViewerWebPart($SiteURL, $pageUrl, $webpartzone, $index, $title, $content)
    $site = new-object Microsoft.SharePoint.SPSite($SiteURL)
    $web=$site.OpenWeb()
    $webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
    $webpart = new-object Microsoft.SharePoint.WebPartPages.PageViewerWebPart
    $webpart.ChromeType = [System.Web.UI.WebControls.WebParts.PartChromeType]::TitleOnly;
    $webpart.Title = $title
    $webpart.ContentLink = "http://www.spcrew.com";
    $webpartmanager.AddWebPart($webpart, $webpartzone, $index);
    $web.Close()
    $site.Close()
function Get-SPSite([string]$url) {
    New-Object Microsoft.SharePoint.SPSite($url)
function Get-SPWeb([string]$url) {
    $SPSite = Get-SPSite $url
    return $SPSite.OpenWeb()
    $SPSite.Dispose()

Hi,
According to your post, my understanding is that you wanted to add the Note board web part to a page with PowerShell.
The name of the Note Board web part is SocialCommentWebPart.
I recommend to use the powershell code below:
$pageUrl="http://sitename/SitePages/test.aspx"
$SiteURL="http://sitename"
$site = new-object Microsoft.SharePoint.SPSite($SiteURL)
$web=$site.OpenWeb()
$webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
$webpart = new-object Microsoft.SharePoint.Portal.WebControls.SocialCommentWebPart
$webpart.title="Note Board"
$webpartmanager.AddWebPart($webpart, "MiddleZone", 0);
$web.Close()
Then the Note board web part will be added to the page.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to add the Social Network share buttons (that work!) to share INDIVIDUAL post from the same page

How to add the Social Network share buttons like Facebook and Twitter (that work!) to share INDIVIDUAL post on the same web address in Dreamweaver? I have searched on google and youtube tutorials, but most of them are "Blogger" and "Wordpress" users.. The only Dreamweaver tutorial is the one that share THE WHOLE page (not individual post on a page). There is Facebook Integration on Dreamweaver (29 Dollar download from Adobe) but so far no review about it so I don't want to spend money for something I don't know. There is also Sharrre but they say there is a bug. It seems like everyone out there use these buttons but I start to get crazy since it seems easy but it's actually complicated to get the html or js script to paste on! Any help would be very much appreciated. Thanks.

Cool,
Here is my test site. I have made at least 3 articles (Fashion, Sport, and Art) with thumbnail images on it.
http://andiratih.free.fr/
On each article I add the share buttons from "AddThis".
However, if I want to ONLY share the "Sport article" on Facebook by clicking share-->Facebook, then the feed is scrambling my images on other articles too and it eventually just share the whole page instead of one particular article.
It is now fine since I only build 3 articles, but as you see when the page is getting long with at least 20 articles it will not be ok.
I don't want to make individual page for each article either, since they are just short article each, and I intend to use this page as a welcome page to update the latest activity every half year.
I have seen many bloggers or pages where even if they have many article on ONE page, they are able to share one particular article to Facebook, and when we click (via Facebook) it will redirect us to exactly that particular article even if the article is on the bottom of the page, and not just bring me to the top of the page only and have to search by myself by scrolling to the bottom of the page to see the article.
Infact, Bloggers and Wordpress seems to have the tool for that so that we can just click and add. I am not a Blogger or Wordpress users but I saw youtube tutorials on that.
I have heard about Dreamweaver behavior, and does this will help to achieve what I want (sorry I'm a beginner)? I also heard about meta tags but I don't know how and where to get them to paste to my html source code.
I have found several sites where the person show how to do this, but when I tried it didn't work, and in fact some other discussions about this are never solved.
Thanks for your input.

How to add an internal link on pages 5.0.1?

Could anyone please tell me how to add an internal link on pages 5.0.1.
I am making FAQ list, and I would like to make the first page of the document as a list of questions and when a user click on each question, it jumps to the answer (in the same document).
I found "Add link" tool but it allows you to jump URL or email only.
I was able to set the list of questions as an index page of "Table of contents" tool and jump to a question page by clicking each page number, however, it fails when I put a question in a table (I would like to place each question and answer in tables for a visual purpose).
It seems a jump by using "Table of contents" become invalid when the contents are placed in a chart. WHy?
Are there any way to solve this problem?
any advise will be appreciated.

Bookmarks have been removed from Pages 5 along with 90+ other features.
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=bb95ac0944151 2bc797f0c2dbd918f4c&mforum=iworktipsntrick
You may have Pages '09 still in your Applications/iWork folder.
The T.O.C. does not index text inside objects which includes Tables.
Peter

How to add a border to image

I am a newby to Photoshop. All I want to do is add a
border to my image. Can't find a tutorial. Help?

Thank you. It looks very helpful.
Date: Mon, 27 Jun 2011 15:03:52 -0600
From: [email protected]
To: [email protected]
Subject: How to add a border to image
Here's a little video from Adobe TV that shows you how to create borders in Photoshop Elements. If you don't have Photoshop Elements, skip the first 1:25 of the video, the rest of the steps apply to Photoshop as well:
http://tv.adobe.com/watch/learn-photoshop-elements-9/creating-a-photo-borde/
>

How to add a Border

Hi!
I want to know how to add a border to a particular column (Vertical) in the report. I have no clue, please help me.
Thank you very much.
null

A partial solution:
-- Select a border color, as suggested.
-- Pull down Format/Border, and deselect
the "top" and "bottom" buttons.
This will get you vertical lines around all
cells with data, but not cells with null
values. Also (it's been a while since I
looked at this in detail) this works nicely
from the live previewer but doesn't work in
all output formats - not HTML for instance,
if I recall correctly. Depends on which
type of output you need.
If you have a lot of null cells, i.e. with
no border, the lines is your best option.
Done neatly it looks about the same.
HTH.
-- Allan Plumb

How to add the "Voltage Calibration"in the DCpower for IVI drive??

How to add the "Voltage Calibration"in the DCpower for IVI drive??

To gather more information concerning the use of IVI there is a very comprehensive page of Class Specifications for IVI Class Instruments:
www.ivifoundation.org
This resource covers all IVI calls for each class of instruments and should provide you wiht valuable information. For an additional overview of IVI and its relationship to NI products, you can also visit our Resource Library:
ni.com>>Resource Library>>Instrument Drivers
Best Regards,
Chris D
Applications Engineer
National Instruments

How to add js files to sharepoint page using sharepoint designer

how to add js files to sharepoint page using sharepoint designer

Upload the files to your site collection into the site assets library or into the style library, depending on perference.
Then you can include the JS files either in the master page, page tempalte or using web parts.

How to read the code of html page

Hi,
I want to know how to read the code of html page through Java? And if anyone know the link of full implementation of Page Rank Algorithm in Java.
Please let me know. I have to do the project on that topic.
Regard
Vivek

Vivek_NITT wrote:
I want to know how to read the code of html page through Java? Get the input stream from an HttpUrlConnection. Read from it like from any other stream.
And if anyone know the link of full implementation of Page Rank Algorithm in Java.Which one?

How to add the InputField to the Standard BSP

Dear Experts,
How to add the Input field to the Standard BSP.Can anyone Expalin the Step by step procedure.
Helpful answers will be rewarded.
Regards,
Ashok.

Dear Ashok,
You can create "Z" copies of both controller and View page in the standard BSP application itself and not by taking the "Z" copy of whole application, by right clicking on the standard application and click on "Create".
You can design design your own page.
Reward points if helpful.
Thanks,
Gokul.N

How to add the date field in the dso and info cube

Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KK

my prob is solved
KK

SSRS 2008 Work order report , in sub total donot want to add the 0 level in ( how to add the expression )

working in Work order report, this report has different level , for example
0 level transaction
1 level transaction
in subtotal don't want to add 0 level transaction,
when I did the sub total it added all the level , so in sub total amount double up because of that
how to add the expression so I can the level 0 take out from sub total , so it does not include in sub total
can some one please help me with this
thanks in advance

Hi Simon_ Hou
I tried the expr the way you suggested , it did not work getting error message, the exp I added is below
this the expression I added on sub total where is highlighted in Yellow, under Cost amount column,
I really appreciate the help
=Sum(IIF(Fields!COLLECTREFLEVEL.Value=
"0",0,Fields!CostAMOUNT.Value),"DataSet1")
please see below my QUERY, can you please help and let me know what I did wrong in my exp
SELECT        PRODTABLE.PRODID, PRODCALCTRANS.COSTGROUPID, PRODTABLE.QTYCALC, PRODTABLE.PRODSTATUS, PRODCALCTRANS.COSTAMOUNT,
                         PRODCALCTRANS.COSTMARKUP, PRODCALCTRANS.REALCOSTAMOUNT, PRODCALCTRANS.CALCTYPE, PRODTABLE.DATAAREAID, PRODCALCTRANS.KEY3,
                         PRODCALCTRANS.CONSUMPVARIABLE, PRODCALCTRANS.REALCONSUMP, PRODTABLE.ITEMID, PRODTABLE.SCHEDDATE, PRODTABLE.FINISHEDDATE,
                         PRODCALCTRANS.KEY1, PRODCALCTRANS.TRANSDATE, PRODCALCTRANS.QTY, PRODCALCTRANS.KEY2, PRODCALCTRANS.COLLECTREFLEVEL,
                         PRODCALCTRANS.LINENUM
FROM            PRODTABLE INNER JOIN
                         PRODCALCTRANS ON PRODTABLE.PRODID = PRODCALCTRANS.PRODID AND PRODTABLE.DATAAREAID = PRODCALCTRANS.DATAAREAID
WHERE        (PRODTABLE.PRODSTATUS = 7) AND (PRODTABLE.DATAAREAID = N'AR1') AND (PRODTABLE.ITEMID = @itemid) AND
                         (PRODTABLE.FINISHEDDATE >= @Paramfromdate) AND (PRODTABLE.FINISHEDDATE <= @Paramtodate)

How to add the Match code object for the requisitioner field in TCODE ME51N

Hi,
How to add the search help (Match code object) for the requisitioner field in transaction ME51N.
Please do the needful to me.
Regards
Rajesh

don't you think that posting your question to a microsoft developer site would be more efficient?
regards,
anton

How to add the entries and how to delete the entries from custom Z-table?

Hi Experts,
My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
Here how to add the entries from program to Z-table.???
And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
Could you please guide me the logic how to crack this???
Let me know if you need more Info
Thanks
Sanju

Hi Sanjana,
What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
*Insert Statement
INSERT dbtab
Syntax
INSERT { {INTO target VALUES source }
| { target FROM source } }.
Effect
The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
System Fields
The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one row was inserted.
4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
The INSERT statement sets sy-dbcnt to the number of rows inserted.
Note
The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
*Modify Statement
MODIFY dbtab
Syntax
MODIFY target FROM source.
Effect
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
Note
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
Hope it helps...
P.S. Please award points if it helps...

How to add the property file..ie(default.properties) to a webdynpro project

Hi All,
How to add the property file..ie(default.properties) to a webdynpro project.
I urgently require the solution. Kindly get it for me.
Regards
DK

Hi DK,
this is described in the second Web Dynpro Java Tutorial
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/b1a3e990-0201-0010-aeb2-a2ef5bc3da8e">creating an Extended Web Dynpro Application</a>
Regards, Bertram

How to add the border to full page

Similar Messages

Maybe you are looking for