How to Add the business scenario for BPC by Using BPR
Hi All,
We want to Use Solution Manager BPR for Mapping of Business Processes for BPC and for this we checked and tried the same consisting of Solution Manager 7.0, "SAP Business Objects Business Planning and Consolidation" but it shows an product version as for "SAP BPC 7.0 FOR MICROSOFT, " Only
But in Solution Manager 7.1 System it is showing for both ""SAP BPC 7.0 FOR MICROSOFT,SAP BPC 7.0 FOR SAP NET WEAVER".
Need to understand why it is not showing Netweaver in Solman 7.0 System and also for mapping this BPC in to Solution manager what are to be taken in to considerations.
Please suggest on this, your help is highly appreciated.
Thanks & Regards,
Hello Hazira,
do you have the same supportpackage level of component ST-ICO in both systems?
The BPR content is always delivered with the ST-ICO component.
Regards,
Thomas
Similar Messages
-
How to add the business transaction to t-code : CIC0 in win client
Dear sir,
We use CRM 5.0 . We would like to add business activity tranaction into t-code : CIC0. But I don't know how to do. Please kindlyadvise how to add the business transaction to t-code : CIC0 in win client.
Thank u and best regards,
VimolHello,
For each transaction type (e.g. Sales Order, Business Activity, opportunity, ....) you can maintain in which channel (IC WebClient, IC WinClient, SAPGUI, PCUI, ...) they are allow to be used. Probably the transaction types you want to see in the IC WinClient (= CIC0) are not enabled for this channel, that's why they don't appear in the WinClient (CIC0).
How to do this?
SPRO>CRM>Transaction>Basic Settings>Define transaction types
Here, look for the transaction types you want to enable in WinClient. Select the transactiont type and select "Channels" from the left pane. Here, add the channel "IC WinClient" (or something like that, I don't know the exact name anymore, in newer versions this no longer exists).
Save and restart the CIC0, after this the transaction type should be enabled.
Hope this helps,
Joost -
How to Add the title name for Graph in Excel
Dear Friends
I am using LabVIEW 8.0.I need how to add the title name for chart in Excel.
Jayavel
Solved!
Go to Solution.Do you have the Report Generation Toolkit? If so, the Excel Easy Graph VI has an input for that.
If you don't have the toolkit then you will need to use ActiveX. Please do a search on how to use ActiveX (there are examples that ship with LabVIEW) to control Excel. There are also lots of example in the Excel thread. NOTE: DO NOT POST QUESTIONS IN THAT THREAD.
Ultimately you will need to look up the information in MSDN. -
How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0
How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?
Hi,
First go thourh the FM import export parameters list.
Try to create an internal table of type INRI-NRRANGENR for number ranges.
We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
Try to create the ncessary ones using this FM.
In the Exit, EXIT_SAPMM06E_001,
the Export parameters are-
EKKO-EBELN- the PO ios created with in that specified range
Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
Try to code this in the Include provded and keep Breakpint and check the PO number generated.
Reply if u need more help on this.
Reward if helpful.
Best Wishes,
Chandralekha -
How to Recreate the Business layer for Deleted Universe
Hi ,
I have moved the universe from DEV to PROD insted of copy. after MOVE i have lost the universe from DEV folder then the reports pointing to the DEV are not working . Now my DEV universe is moved , there is no universe in DEV Folder then i have placed my back up universe in to DEV folder and returns with the error named "You do not have the right to access data returned by this universe. (Error: INF )" , If i try to edit the qurey returns with error named "No business layer sent back from server" and i try to change source of my DEV reports but the Change Source option is disabled.
The below options i have tried
1. Refresh Structurre of universe and Exported
2. Request the universe and connection access from BO admin team (They have refused)
Please suggest me if there any work around.
Thanks in advanse.
Regards
MKRGrant permission to the user on top of the universe, universe connection , folders and reports under the folders.
Before doing this login with admin account and test running of the reports. if there are no issues with admin then just grant the user access. its simple -
How to find the lowest grade for each student using a Select query?
Hey I'm having a bit of trouble here
I have this table
Student - Grade
John - 8
Richard - 9
Louis - 9
Francis - 5
John - 13
Richard - 10
Peter - 12
Grades can range from 0 to 20.
Name - varchar(50)
Grade - integer
I am trying to generate a SQL search to find each lowest grade for each student.
So far I have done:
select s.name,s.grade
from student s
where s.grade = (select min(grade) from student)
The result of that search returns me only the lowest grade of all the grades posted above, which is Francis - 5.
I want to find the lowest grade, but not only for Francis but also for every other student in the table.
How do I do that?
Thank you in advanced.ok,
Now we are moving into Analytic SQL:
with student as (select 'John' name, 8 grade, 'fail' result from dual union all
select 'John' name, 13 grade, 'pass' result from dual union all
select 'Francis', 5 grade, 'fail' from dual union all
select 'Peter', 12, 'pass' from dual)
-- End of your test data
SELECT name,
MAX (result) KEEP (DENSE_RANK FIRST ORDER BY grade) result,
MIN (grade) min_grade
FROM student
GROUP BY namePlease note that I passed ;)
Regards
Peter
To read more:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions056.htm#SQLRF00641 -
How to get the home page for a user using Pl/sql code ?
Hi,
I have a pl/sql procedure which runs after a form submission on a dynamic page. At end of completion of the procedure I want to send user to his/her home page. I am trying to write at the end of procedure to redirect the user to the home page. How do I do that ? What is way to redirect to a page using pl/sql and how do I know the user home page url ?
thanks,
MainakHi,
Try <portalschema>.wwv_redirect.url('<portalschema>.home');
Please replace portalschema with the name of your portal schema.
Thanks,
Sharmila -
How to get the root node for a child using connect by prior
Hi,
I searched at many places to do this but not able to get the exact o/p sp posting my question here.
I have a table with parent_id and child_id columns. The levels of this parent_child can be many but my aim is to find the ultimate parent ( dont know the right term)
like if I have a child_node= xyz and its parent= pqr and its parents=lmn which might be ultimate parent which doesnt have any further parent.
So if i start with child_code= "xyz" then i should get the parent as "lmn" and not the immediate parent "pqr".
Please help.
Thanks,
AashishTo find the Parent on emp table:
select empno,ename,level
from emp
where level=3
start with empno=7934
connect by empno= prior mgrTo find the Child on emp table:
select empno,ename,level
from emp
where level=1
start with empno=7934
connect by prior empno= mgrBut you need to know the level or position to specify the level of parent or child. But there are some other possible options available if we can know the requirement properly.
Edited by: Vasista on Jan 11, 2011 2:27 AM
Edited by: Vasista on Jan 11, 2011 2:30 AM -
Creating a Business Scenario for CPM BPC 10
Hi Everyone,
I've been trying to create a Business Scenario within my Solution Manager (TCode: SOLAR01). But I've don't see any option related to our version of our Business Planning and Consolidation (BPC 10). The only option I see that is close enough is "SAP BusinessObjects Business Planning and Consolidation" but it shows an older product version "SAP BPC 7.0 FOR MICROSOFT, SAP BPC 7.0 FOR SAP NETWEAVER".
To be clear, the ff is what I'm trying to do.
Steps:
1. TCode SOLAR01
2. Project >> Business Scenarios
3. Source = Business Process Repository
4. Add Scenario Name (F4)
Our SAP BPC software has been installed within our "SAP Netweaver AS ABAP 7.31" as the following Software Component:
Software Component: CPMBPC
Release: 801
Level: 0001
Highest Support Package: SAPK-80101INCPMBPC
Description: CPM Business Planning and Consolidation
So my question is, how do I properly add the business scenario that matches my BPC 10 software component? Is there anything I must do/check first?
Apologies if this might sound very basic, but I'm new to Solman.
Any help is appreciated.
Thanks and Regards,
BrianHi Brian,
I have the same scenario in my environment consisting of Solution Manager 7.0, "SAP Business Objects Business Planning and Consolidation" but it shows an older product version "SAP BPC 7.0 FOR MICROSOFT, " Only
But in Solution Manager 7.1 System it is showing both ""SAP BPC 7.0 FOR MICROSOFT,SAP BPC 7.0 FOR SAP NET WEAVER".
Please Suggest is anything needs to be done in Solman 7.0 System ? -
Implement the following scenario for credit memo
Dear experts!
Thank you for your attention!
how to implement the following scenario for credit memo??????
1.Credit memo requests are usually blocked for billing (that is, credit) upon creation until the
employee responsible releases this block.
2.Within our company, we want make the definition of the point at which the check is carried out and
the employee responsible dependent upon the value of the credit memo request.
3.If the value of the credit memo request is below a certain minimum limit, then it can be released
automatically by the system.
4.The workflow within the framework of credit memo processing now guarantees that the employee
responsible is automatically determined and informed when a credit memo request is created,
depending on the value involved.
waiting for your help!!!!!
Best regard!
TangdarkHi,
Hope so you know all the setting regarding credit memo customizing.
Otherwise use the standard one.
Regarding authorization go to PFCG and create a new role.
In that you can maintain the authorization regarding the minimum credit limit.
Please check out this setting.
And update me also if I was wrong.
Regards
Raj. -
How to write the Business Process
Can anybody please give me the link on How to write the Business Process for <b>IC_C03</b>... we have done the blue print and going to write the documentation for this info provider.
So please provide the related links..........Probably the best thing to do is go to your boss/team lead/project manager/client contact and ask them what documentation they want you to produce and what should go in it. No-one here can guess at that.
Gareth. -
Business scenario for product costing make to stock in pharma
Hello sap gurus,
how to explain the business scenario of make to stock product costing. did any one explain about this.
regards,
suneethahttp://help.sap.com/
-
Business scenarios for variables
can anyone tell me the business scenarios for the replacement path n customer exit variables........using SD data......
regards
gyandeepHi,
Please search the forum. You'll get a lot of good material on Production Support activities. This topic has been discussed in detail on the forums.
Cheers,
Kedar -
How to add the Match code object for the requisitioner field in TCODE ME51N
Hi,
How to add the search help (Match code object) for the requisitioner field in transaction ME51N.
Please do the needful to me.
Regards
Rajeshdon't you think that posting your question to a microsoft developer site would be more efficient?
regards,
anton -
How to add a new tab for the project?
Dear All Experts,
Could you tell me how to add a new tab for the project?
Pls refer to the screenshot as below:
Thanks!
Xinling ZhangHi,
The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
And in cj02, there is no this tab also in the wbs detailed screen,
Thanks!
Xinling
Maybe you are looking for
-
How to connect Pocket PC to 128 bit WEP protected Airport network
Friends: Can anyone lead me through the steps to connect my Hp iPaq 4155 Pocket PC to my 128 bit WEB protected Airport network? Thanks for your help, Migs
-
Is there a way to extract a sequence from an FCP7 project that crashes on opening?
I ingeniously used a Reference Quicktime to edit with in an old project, and now that that RefQT no longer works (the files it references are old, were moved/removed), the project stalls FCP7 with the rainbow pinwheel after the reconnection dialog is
-
Multiple Birthday in iCal since OSx Lion
I use OS X Lion in German. Since my upgrade to Lion there are multiple entries of the birthday in iCal. If I cancel the entry in my adress book there are still multiple birthday entries in iCal for this person.
-
Printer will not connect wirelessly / HP installer network ui plugin has stopped
I have tried uninstalling and reinstalling my Photosmart software multiple times in an effort to connect the printer to my wireless network (WEP). Each time I try, the software installs but will not allow me to connect the printer to my wireless net
-
Grey App Icon Appears. Reboot and apps appear on different screens
I've noticed a strange thing happening on my home screen. Sometimes, and it seems when apps are automatically being updated, a gray app icon with a circle and an 'x' appears on my home screen. It will not go away and you cannot select it. My home s