How to add the "EXPLICIT" tag on my music (not pirated)

Hello (i'm French, so i'm sorry for my English)
Well, when sometimes i buy some musics, i can see the red tag "EXPLICIT" & my question is (after many research) is:
How to add this tag on my own music (music that i bought in a store & ripped into Apple Lossless [.m4a])
Thank you very much.
Message was edited by: Haaghun

http://hints.macworld.com/article.php?story=20070616175442397
http://mac.majorgeeks.com/download5526.html

Similar Messages

  • How do i add the explicit tag

    i want to be able to add the explicit tag to my non-purchased songs in my library to .mp3s and .aac. does anyone know how to do this? does it have to do something with the id3 tag? i just to be able to see whats explicit and not, for future reference. thanks

    This is a feature I have been requesting for the past two years. It looked as if iTunes 7 might finally do it, with displaying the explicit tag from purchased songs (incorrectly, to nonexplicit content, I might add), but no.
    This seems like a no-brainer Apple, especially if you can display it for purchased music, there should be a way to turn it off/on on a song-by-song basis... that would also solve all of the problems and requests.
    I suggest a good place for the option might be on the option tab of the get info window, under "my rating"... makes sense to me. oh well, we'll just have to wait for the next version so we can be disappointed again.
    P.S. Typing "Explicit" in the comments field is a terrible solution, as there are already too many uses for the comment field that should be turned into true meta data, such as featured artists, and true comments such as thoughts or reviews of the song.

  • Creating a Podcast: The "explicit" tag

    I'm creating a podcast and while I don't intend to specifically create explicit content, I can't say for sure that there might not be an instance where I'm interviewing someone or I get a shot of a public event where something explicit might happen (i.e. a "swear word" heard off camera or one of those obscene boobies somewhere in the shot).
    I hate to have the "EXPLICIT" tag placed on my podcast, but I don't want to get banned either. What are your recommendations? Should I be ultra-safe and label it "explicit" just in case or can I just label the individual episodes with the tag and just say "no" in the overall feed explicit tag?

    Robbie, welcome. Nice to be prudent but this may be overkill. You can add an explicit tag to a specific podcast, for example if someone lets slip some expletive in an interview. For the most part, if your podcasts are normal, you can leave them as they are.
    If you think you have to add such a tag, it might be worthwhile including something in the description (e.g. "audience comments can be overheard and may not be to everyone's tastes, so I added an explicit tag for this episode."

  • I designed a site in Adobe Muse but forgot to add the H1 tags after I made it live.

    I designed a site in Adobe Muse but forgot to add the H1 tags after I first made it live. Will this effect my google analytics ? if so how can I make sure that the H1 tags are picked up early in the html by the google search spiders instead of way down the html? I opened the html and can see from the source code that the H1 tags are on the 130 line of code instead of nearer the top..is this a problem for being seen on google analytics? the site is www.mcgeehangolf.com

    Thanks Michael, sorry for the delay! Again I have made another site recently www.bodicotevillagehall.co.uk IF you do a search in google for Bodicote village hall it doesn't show up until page 2 or if you search bodicote village hall hire it is 8th on the first page. Again I have added keywords and google analytics!
    Thanks

  • How to add the Social Network share buttons (that work!) to share INDIVIDUAL post from the same page

    How to add the Social Network share buttons like Facebook and Twitter (that work!) to share INDIVIDUAL post on the same web address in Dreamweaver? I have searched on google and youtube tutorials, but most of them are "Blogger" and  "Wordpress" users.. The only Dreamweaver tutorial is the one that share THE WHOLE page (not individual post on a page). There is Facebook Integration on Dreamweaver (29 Dollar download from Adobe) but so far no review about it so  I don't want to spend money for something I don't know.  There is also Sharrre but they say there is a bug. It seems like everyone out there use these buttons but I start to get crazy since it seems easy but it's actually complicated to get the html or js script to paste on! Any help would be very much appreciated. Thanks.

    Cool,
    Here is my test site. I have made at least 3 articles (Fashion, Sport, and Art) with thumbnail images on it.
    http://andiratih.free.fr/
    On each article I add the share buttons from "AddThis".
    However, if I want to ONLY share the "Sport article" on Facebook by clicking share-->Facebook, then the feed is scrambling my images on other articles too and it eventually just share the whole page instead of one particular article.
    It is now fine since I only build 3 articles, but as you see when the page is getting long with at least 20 articles it will not be ok.
    I don't want to make individual page for each article either, since they are just short article each, and I intend to use this page as a welcome page to update the latest activity every half year.
    I have seen many bloggers or pages where even if they have many article on ONE page, they are able to share one particular article to Facebook, and when we click (via Facebook) it will redirect us to exactly that particular article even if the article is on the bottom of the page, and not just bring me to the top of the page only and have to search by myself by scrolling to the bottom of the page to see the article.
    Infact, Bloggers and Wordpress seems to have the tool for that so that we can just click and add. I am not a Blogger or Wordpress users but I saw youtube tutorials on that.
    I have heard about Dreamweaver behavior, and does this will help to achieve what I want (sorry I'm a beginner)? I also heard about meta tags but I don't know how and where to get them to paste to my html source code.
    I have found several sites where the person show how to do this, but when I tried it didn't work, and in fact some other discussions about this are never solved.
    Thanks for your input.

  • How put explicit tag on iOS7 music app

    Hi guys, I updated my iTunes to 12.0 but my iOS is still 7.
    I download some musics not using the iTunes store, so I manually added the explicit tag.
    The Problem is that I can see the explicit tag on iTunes, but when i sync the music to my phone.
    I cannot see the explicit tag!!
    I really want to the little E tag on my phone....
    Can you guys please help me?

    You need to add the tag:
    <itunes:explicit>yes</itunes:explicit>
    in the top section (before the first 'item' tag) to apply to the whole podcast, or between <item>...</item> tags to apply to individual episodes.
    If you are using a podcast creation program or service which does not allow you direct access to the feed you will need to look for a place in it where you can set this.

  • How to add the date field in the dso and info cube

    Hi all.
    I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
    Thanks & Regard
    KK

    my prob is solved
    KK

  • SSRS 2008 Work order report , in sub total donot want to add the 0 level in ( how to add the expression )

    working in Work order report, this report has different level , for example
    0 level transaction
    1 level transaction
    in subtotal don't want to add 0 level transaction,
    when I did the sub total it added all the level , so in sub total amount double up because of that
    how to add the expression so I can the level 0 take out from sub total , so it does not include in sub total
    can some one please help me with this
    thanks in advance

    Hi Simon_ Hou
    I tried the expr the way you suggested , it did not work  getting  error message,  the exp I added is below
    this the expression I added on sub total where is highlighted in Yellow,  under Cost amount column,
    I really appreciate the help
    =Sum(IIF(Fields!COLLECTREFLEVEL.Value=
    "0",0,Fields!CostAMOUNT.Value),"DataSet1")
    please see below my QUERY, can you please help and let me know what I did wrong in my exp
    SELECT        PRODTABLE.PRODID, PRODCALCTRANS.COSTGROUPID, PRODTABLE.QTYCALC, PRODTABLE.PRODSTATUS, PRODCALCTRANS.COSTAMOUNT,
                             PRODCALCTRANS.COSTMARKUP, PRODCALCTRANS.REALCOSTAMOUNT, PRODCALCTRANS.CALCTYPE, PRODTABLE.DATAAREAID, PRODCALCTRANS.KEY3,
                             PRODCALCTRANS.CONSUMPVARIABLE, PRODCALCTRANS.REALCONSUMP, PRODTABLE.ITEMID, PRODTABLE.SCHEDDATE, PRODTABLE.FINISHEDDATE,
                             PRODCALCTRANS.KEY1, PRODCALCTRANS.TRANSDATE, PRODCALCTRANS.QTY, PRODCALCTRANS.KEY2, PRODCALCTRANS.COLLECTREFLEVEL,
                             PRODCALCTRANS.LINENUM
    FROM            PRODTABLE INNER JOIN
                             PRODCALCTRANS ON PRODTABLE.PRODID = PRODCALCTRANS.PRODID AND PRODTABLE.DATAAREAID = PRODCALCTRANS.DATAAREAID
    WHERE        (PRODTABLE.PRODSTATUS = 7) AND (PRODTABLE.DATAAREAID = N'AR1') AND (PRODTABLE.ITEMID = @itemid) AND
                             (PRODTABLE.FINISHEDDATE >= @Paramfromdate) AND (PRODTABLE.FINISHEDDATE <= @Paramtodate)

  • How to add the Match code object for the requisitioner field in TCODE ME51N

    Hi,
    How to add the search help (Match code object) for the requisitioner field in transaction ME51N.
    Please  do the needful to me.
    Regards
    Rajesh

    don't you think that posting your question to a microsoft developer site would be more efficient?
    regards,
    anton

  • How to use the Wire-Tag in Cairngorm 3 Observer Library?

    Dear Observer-Lib coders,
    Maybe I am posting my issue into the wrong forum, see this thread:
    http://forums.adobe.com/thread/756046
    I'd like to know how to use the Wire-Tag mentioned in the Observer-Lib docu, see:
    http://sourceforge.net/adobe/cairngorm/wiki/HowToUseCairngormObserver/
    Please let me know if there is anybody who knows how to use
    this Wire-tag. A small code example would be great, too!
    Thank you,
    masu

    Ok ... I solved it!
    see this thread: http://forums.adobe.com/thread/756046

  • How to use the HTML tags in the reports.

    hi.
    can any one tell me how to use the HTML tags in the reports.
    i m using the forms 10 g rel 2 and reports 10 g rel 2 and application server 10g rel 2.

    Set the Contains HTML Tags property of an object to Yes, then the tags in the object's text (if any) will be used to format the object.

  • How to add the entries and how to delete the entries from custom Z-table?

    Hi Experts,
    My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
    Here how to add the entries from program to Z-table.???
    And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
    Could you please guide me the logic how to crack this???
    Let me know if you need more Info
    Thanks
    Sanju

    Hi Sanjana,
    What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
    *Insert Statement
    INSERT dbtab
    Syntax
    INSERT { {INTO target VALUES source }
           | {     target FROM   source } }.
    Effect
    The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
    System Fields
    The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
    sy-subrc Meaning
    0 At least one row was inserted.
    4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
    The INSERT statement sets sy-dbcnt to the number of rows inserted.
    Note
    The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
    *Modify Statement
    MODIFY dbtab
    Syntax
    MODIFY target FROM source.
    Effect
    The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
    System fields
    The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
    sy-subrc Meaning
    0 At least one line is inserted or changed.
    4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
    The MODIFY statement sets sy-dbcnt to the number of processed lines.
    Note
    The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
    Hope it helps...
    P.S. Please award points if it helps...

  • How to add the property file..ie(default.properties) to a webdynpro project

    Hi All,
    How to add the property file..ie(default.properties) to a webdynpro project.
    I urgently require the solution. Kindly get it for me.
    Regards
    DK

    Hi DK,
    this is described in the second Web Dynpro Java Tutorial
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/b1a3e990-0201-0010-aeb2-a2ef5bc3da8e">creating an Extended Web Dynpro Application</a>
    Regards, Bertram

  • How to add the library of linphone into existing project ?

    How to add the library of linphone into existing project ?

    How to add the library of linphone into existing project ?

  • How to add the double headings in Alv Report.

    Hi All,
    Plz suggest me how to add the double headings in ALv Report.
    Ram

    Hi,
    Try out this program....
    REPORT  ypm_historycard_rep.
    TYPE-POOLS : slis.
    DATA : it_cbm TYPE STANDARD TABLE OF mara.
    DATA : it_layout TYPE STANDARD TABLE OF slis_layout_alv WITH HEADER LINE,
           wa_fcat TYPE slis_fieldcat_alv,
           it_fcat TYPE slis_t_fieldcat_alv.
    START-OF-SELECTION.
      SELECT  *
      FROM  mara
      INTO CORRESPONDING FIELDS OF TABLE  it_cbm
      where matnr = 'D80K7'.
    END-OF-SELECTION.
      it_layout-zebra = 'X'.
      it_layout-colwidth_optimize = 'X'.
      it_layout-f2code = '&ETA'.
      APPEND it_layout.
      DEFINE macro4fcat.
        wa_fcat-col_pos = &1.
        wa_fcat-fieldname = &2.
        wa_fcat-tabname = &3.
        wa_fcat-seltext_l = &4.
        append wa_fcat to it_fcat.
        clear wa_fcat.
      END-OF-DEFINITION.
      macro4fcat    '1'  'MATNR'         'IT_CBM'   'MATERIAL NO'    .
      DESCRIBE TABLE it_cbm.
      IF sy-ucomm = '&F03'.
        MESSAGE 'hi hello good morning "press enter button" this is quiz' TYPE 'S'.
      ENDIF.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
      i_callback_program                = sy-repid
    i_callback_html_top_of_page       = 'HTML_TOP_OF_PAGE'
      is_layout                         = it_layout
      it_fieldcat                       = it_fcat
       i_save                            = 'A'
      TABLES
      t_outtab                          = it_cbm
      EXCEPTIONS
      program_error                     = 1
      OTHERS                            = 2
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    *&      Form  html_top_of_page
    *       text
    *      -->TOP        text
    FORM html_top_of_page USING top TYPE REF TO cl_dd_document.
      DATA: l_text(255) TYPE c.
      DATA: text1(255)  TYPE c.
      DATA: t_header TYPE REF TO cl_dd_table_element ,
            wa_header TYPE REF TO cl_dd_table_area.
      CALL METHOD top->add_gap
        EXPORTING
          width = 10.
      CALL METHOD top->add_text
      EXPORTING
        text          = 'hello'
        sap_style     = 'HEADING'
    CALL METHOD top->add_gap
        EXPORTING
          width = 20.
      CALL METHOD top->add_text
      EXPORTING
        text          = 'HOW ARE YOU'
        sap_style     = 'HEADING'.
        CALL METHOD TOP->new_line
    *      EXPORTING
    *        repeat =
        CALL METHOD top->add_gap
        EXPORTING
          width = 50.
      CALL METHOD top->add_text
      EXPORTING
        text          = '____________________________________________________________'
        sap_style     = 'HEADING'.
        CALL METHOD TOP->new_line
    *      EXPORTING
    *        repeat =
        CALL METHOD top->add_gap
        EXPORTING
          width = 90.
      CALL METHOD top->add_text
      EXPORTING
        text          = 'YOU CAN TRY LIKE THIS'
        sap_style     = 'HEADING'.
    ENDFORM.                    "html_top_of_page
    Regards
    Debarshi

Maybe you are looking for