How to add the new character in FDI1FDI2 Define/Change Reports?

Hi,
There are some fixed charcters defined in the T. Codes FDI1FDI2 Define/Change Reports, can we add the characters here based on which we can get teh desired output. If yes, hen please tell me how to add the characters?
Thanks in advance...
Regards
Nitin

thanks

Similar Messages

How to add a new character set encoding?

Hello,
can anybody please explain to me, how to add a new character set encoding to Mac OS Tiger?
I have two Mac laptops, a new one with Snow Leopard and an older one with Tiger, and on the old one i cannot use or enable anywhere the "Russian (DOS)" character set encoding, which i need to be able to use some old text files.
On the Snow Leopard, this encoding is present in the list of available encodings of TextWrangler, but not in TIger.
If i have understood correctly, this is not a problem of TextWrangler, and the same encodings are available systemwide.
So, the question is: how to add new encodings to Tiger (or to Mac OS in general)?
Thanks.

I think possibly that's in the Get Info window of Finder?
I don't think either that or the input menu have any effect on available encoding choices. Adding languages to system prefs/international/languages can do that, but once you have added Russian there, I don't know of any way to add an additional Russian encoding (there are quite a number of them).

How to add the new tab in Quotation VA21

Hi,
How to add the new tab after Addition data B in line item in Quotation VA21?
Please help me for this query.
Devendra

Dear Devendra,
Use the program SAPMV45A & the screen number provided by SAP is 8459.If you activate this screen and include the screen in 4462.
PROCESS BEFORE OUTPUT.
*                            Verarbeitung vor der Ausgabe
   MODULE VBAP_BEARBEITEN_VOR.
   CALL SUBSCREEN KUNDEN-SUBSCREEN_8459 INCLUDING 'SAPMV45A' '8459'.
PROCESS AFTER INPUT.
*                            Verarbeitung nach der Eingabe
* Hier weitere Prüfungen
   CALL SUBSCREEN KUNDEN-SUBSCREEN_8459.
Regards,
Anand

How to add the new dep area in existing cod

Dear all,
how to add the new dep area in existing cod we are planing to implement the IFRS by using leading ledger and non leading ledger present we are using OL leading ledger
present we are using dep area 01 ,15
how to achive the parallel accounting in asset accounting how to add new dep area 30 in existing COD
if any document plz refer me

Hi Bhayyapu,
Please refer to the links given below.
New Depreciation area
Adding a New Depreciation Area to Existing Assets - Financial Accounting (FI) - SAP Library
Hope this will help you.
Regards
Eugene

How to add a new character in code page

Hi,
I need to add a new character to existing code page in the upgraded system.
The character is latin small s with caron (u0161 ).
The character ID is 000161.
What is the byte sequence of the same?
Thanks and Regards
Shraddha

Use tranaction SCP .
Under segment , take the character sequence and include your new id value . Byte sequence in my opinion will be confirmed from the client .
Br,
Vijay.

How to add the new line in reciever FCC

Hi All,
I have my reciever FCC with me, but I just need to add one more additional line or you can say seprate the first line.
So how to add extra or new line in the current structure?
Please let me know if there is any parameter for this.
Thanks in advance.
Regards,
Rahul Kulkarni

Hi Rahul,
You can achieve this by endseperatot "nl"
If record set structure is * means fine, you just add second line field names by using end separator "nl".
If you added first line names in recordsetstructure add second line names as well and remaining same use end separator.
Example (below file is having two lines):
<NameA>
name,address,id
empid,sal,region
<NameA/>
your FCC will be (according to your requirement the below 3 fileds will be use full).
Recordsetstructure - *
NameA.fieldvalues - name,address,id
NameA.endseperator - nl
NameA.fieldvalues - empid,sal,region
Thanks & Regards,
A.Neelima.

How to insert the new toolbar icons to a ALV report in custom container

Hi,
I found the exporting parameter for excluding the toolbar icons in the method "set_table_for_first_display" but I didn't find any parameter for including the new toolbar icons. I do not want to include the toolbar icons through the PF-Status, but want to include them with the method. Please tell me is there any option of including toolbar icons with using the above method.
Thanks,
Srinivas.

Hi Srinivas,
Refer to the link
Adding buttons to standard alv toolbar in OOALV
Thanks

How to add the new Signature Filter to LiveCycle Digital Signatures?

I have been wrote my own plugin for Adobe Reader.
This plugin creates signatures by cryptoalgorithm "GOST R 34.10-2001" instead of RSA used in Reader and Livecycle.
As a result, I can't validate signatures created by my plugin in the LiveCycle Digital Signatures. In the log file of JBoss are written next:
"Unsupported signature filter detected: GostSignaturePlugin".
My question is how to install a support of my signature filter in to the LiveCycle Digital Signatures?
Is it possible to install my existing plugin for adobe reader into LiveSycle, or I must to write new plugin for LiveSycle?

Hello Jose,
Try making an entry in tables SMOFFILTAB and SMOFFILFLD.
This might help!
Best Regards,
Shanthala Kudva.

How to add a new field in Query Builder or Report

Hi,
I am writing a report using Oracle 6i query builder and report.
example:
QTY_1 QTY_2 QTY_3
QTY_1 and QTY_2 are table fields and QTY_3 Is not. I need to show the value of (QTY_2-QTY_1) in QTY_3.
I need to create a field QTY_3 which is not in the database table. How do I do that?
Jun

Hi,
Try using formula to return the qty_1 - qty2.
or
select qty_1, qty_2, (qty_1 - qty_2) qty_3
from table;
regards,
CB

How to add a new char in Update rule

Hi Gurus:
I copied update rules from an old cube. This new cube is a copy of old cube - almost.
One of the char is missing in the new cube when compared to old cube. There is a small update routine for that char which I need to introduce to new cube.
My problem is, I'm not able to figure out how to add the new char in the update rule & start the mapping process..
Thanks & Regards

Dear Bhanu: This is what happened.
When I copied - it defaulted this char with what present in comm structure. Basically the old cube has a routine for this char...
And the position of this char in the update rule for chars..got realigned.
I'm sorry - I should have check it properly.
Thanks a LOT for your time & input...I will assign the points
Best Regards

Add the new item through the Bapi 'bapi_outb_delivery_change'

I want to add the new item to the existing outbound delivery.How to add the new item in the bapi 'bapi_outb_delivery_change'. Please provide me the code for the bapi 'BAPI_OUTB_DELIVERY_CHANGE' to add the new item.

Hi Kyndal,
I have a requirment to add new items in a delivery which will refer to the higher items in the same delivery itself.
I am trying to use the BAPI BAPI_OUTB_DELIVERY_CHANGE for the purpose.
Could u pls give some clue on how to tried to do it?
I am constantly getting a error VL216.
Also I tried passing the reference document and item : same delivery number and the higher level item in the delivery
VBTYP_N = J

How to add entire new row at the top of table in pdf report from c# windows forms using iTextSharp

Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
using System;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using System.Data;
using System.IO;
using System.Data.SqlClient;
using System.Windows.Forms;
using iTextSharp.text;
using iTextSharp.text.pdf;
namespace DRRS_CSharp
public partial class frmPDFTechnician : Form
public frmPDFTechnician()
InitializeComponent();
private void btnExport_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
PdfPTable inner = new PdfPTable(1);
inner.WidthPercentage = 115;
PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
inner.AddCell(celt);
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(inner);
doc.Add(table);
doc.Close();
The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
So my question is how to make my column headers in bold?
So these are my questions.
1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?
I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
Any help or guidance in solving this problem would be greatly appreciated.
vishal

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to add a new column (Project Number) in the action items table under NPD Module?

There are two projects with same name and created by same person in NPD.
So when it is displayed in "Action Items" table, It looks similar.
To avoid this, I need one more column (Project Number) to be added in the "Action Items" table and " Strategic briefs and projects" table.
So, How to add a new column (Project Number) in the "Action Items" table and " Strategic briefs and projects" table under NPD Module?
Please do the needful.

There is no out of the box configuration available to add columns to NPD action items. As always we welcome enhancement requests.
Thanks
Kelly

How to add a new tab for the project?

Dear All Experts,
    Could you tell me how to add a new tab for the project?
    Pls refer to the screenshot as below:
Thanks!
Xinling Zhang

Hi,
    The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
    And in cj02, there is no this tab also in the wbs detailed screen,
Thanks!
Xinling

How to add a new field in the cube and load data

Hi,
The requirement is
We have ZLOGISTICS cube , the data souce of this filed has REFDCONR-reference dcument number filed . We have to create a new field in cube load data and get this new filed into the report also.
Please any one can help me with the step by step process of how to do?
How to get the data into BW and into the report.

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

How to add the new character in FDI1FDI2 Define/Change Reports?

Similar Messages

Maybe you are looking for