How to add the Profit center Group in the PA report KE33.

Hi Frnds,
How to add the Profit center Group in the PA report KE33.Iam not able to find PC group in the list to add to the Charateristics already added.

Hi
PC group is not available as a Char in COPA..
if you want to do that, either create a Char Hierarchy in KES3 for the Char Profit Center
OR
Create a WW char in KEa5 and write a derivation rule using the method "Enhancement" .. Write ABAP Code in COPA0001 exit
bt, Ajay M

Similar Messages

  • How to create a profit center group using MDG-F?

    Given that there is a controlling area CA created in ECC. under which there is a standard profit center hierarchy let us call it ABCD created. Under ABCD, there is a Profit Center Group PCG01 already created in ECC. Now what steps (or screens) I should go through on MDG-F if I want to create another profit center group PCG02 that should be placed under PCG01? Thanks for your help.

    Hi ,
    First of all you need to create Profit Center from Create Change Request by selecting the change request type of PCTR Single Processing.
    Complete the all approval of the Profit center. Once your PCTR gets activated , it will go & sits into MDG tables ONLY.
    You have to make a replication setup of Local replication for replicating this created PCTR via MDG to the ECC Back end so that you can see the same data in the CEPC table.
    Once you are done with this, use Collective Processing form Change Request of PFCG role where you can create your PCTRG & PCTRH . You can assign the PCTR to PCTRG & PCTRH accordingly.
    Hope this answers your all questions.
    Best Regards,
    Kaustubh

  • How to add the activity report or program in CIC0 win client

    Dear Sir,
    Please kindly advise if I would like to add the new program or monitor activity report  to display in t-code : CIC0 . Is it possible for the screen of agent.
    Thank you and best regards,
    Vimol

    Hi Vimol,
    As we said for the action box you can open it from the cic0 in another screen.
    Then with the standard facsheet you can't do it, but if you want to develop it, should be no problem, but I think it's quite hard. Look in forum for facsheet modifications, and you'll have an idea, of what it can suppose.
    Explain a bit more, why do they want this report? how are they going to use it? so I can give you other ways to arrive to the same point.
    Regards,
    TPT

  • Report painter - profit center group

    Hi all,
    How do i make profit center group available in the selection screen before executing the report.
    or.
    I wanted profit center group report, while executing the report how to make profit center group as selection Criteria
    Pls it is urgent.,assured full pint.
    Thanks,
    Sujai C

    Hi.
    First of all, through transaction GS01 create a set ID for profit centers.
    Give table GLPCT, let the set type be the default (basic set) and give field name RPRCTR. Then define the range of profit centers you want. If you want all the profit centers give * in the "from value field".
    Then create a variable through transaction GS11. Give table and field as above, choose variable type set and at the default set field choose the set you created.
    Finally, at report painter go to Edit/General Data Selection and select profit center.
    Check both flags (for entering sets and variables) and give at the form field the variable you've made.
    Now the progit center group will be available in the selection screen with default value the set you've made.
    Regards

  • Finding Profit center group description ?

    Hi all,
    I want profit center group description for my report, when i look at the setheader table i could see the description in the output but when i try to locate the field in the SE11 for SETHEADER i couldnt find that
    field ? Can you people tel me how to solve this problem ?
    Thanks,
    Lavanya.

    Hi Lavanya,
    You can get the description from the table SETHEADERT, field DESCRIPT.
    Cheers,
    Sri.

  • Profit center group wise Asset report

    Hi
    My client wants to take Fixed Asset report according to Profit Center groups for more efficient reporting.
    Please tell me How to take this report in ECC6.
    Your kind help will be appriciated.
    Thanks & Regards
    Kishore

    use GR55 T.code and give profit center group and balance sheet accounts and execute.

  • S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance

    Hi,
    I am looking to branch off from a line item in the S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance report to the actual posting document. Is there a way to do this?
    Thanks,
    Ram
    Message was edited by:
            Ram R

    Hi Nadini,
    Thats cool. I have assigned points.
    Another question. S_ALR_87013326 shows balance sheet accounts as well with zero balances. Is there a way to eliminate these accounts or populate them with the relevant values.
    Thanks,
    Ram

  • How to find the profit center group for a profit center?

    How to find the profit center group for a profit center?

    Hi,
    try this also
    In order to pass the setid parameter of the FM, you have to concatenate the following things
    Setid + KOKRS (Controlling area) + Profit Center Group into one variable.
    In my example below, I have declared as constants and concatenating to gv_setid.
    gc_01016 is the set id for profit centers
    gc_kokrs is the controlling area
    gp_pprct is the Profit Center group entered in the selection screen.
    You will get KOKRS value from the cepc-kokrs.
    data :   gc_0106(4)   TYPE c VALUE '0106',
               gc_kokrs      LIKE cepc-kokrs VALUE 'ABCD'.
               gv_setid          LIKE sethier-setid,
               gt_set_values_1   LIKE setvalues OCCURS 0 WITH HEADER LINE.
      CONCATENATE gc_0106  gc_kokrs gp_pprct INTO gv_setid.
      CONDENSE gv_setid.
      CALL FUNCTION 'G_SET_TREE_IMPORT'
        EXPORTING
          client                    = sy-mandt
          fieldname                 = 'RPRCTR'
          langu                     = sy-langu
          setid                     = gv_setid
          tabname                   = 'GLPCT'
          no_table_buffering        = 'X'
        TABLES
          set_values                = gt_set_values_1
        EXCEPTIONS
          set_not_found             = 1
          illegal_field_replacement = 2
          illegal_table_replacement = 3
          OTHERS                    = 4.
    By using the above FM you will get the values into gt_set_values1 once sys-subrc value eq 0, it is internal table which consists of all the profit centers for the proft center group.
    Regards,
    Venkatesh

  • How to get the member of cost element group from Profit center group

    Hi Guys,
                  I need to get the member of cost element group from Profit center group like in Tcode KCH3 and the same from Account Group like in Tcode KDH3.
    Any Function Module available to get this data.
    Thank U for Ur time.
    Cheers
    Senthil

    I am closing this thread.

  • How to create master data source for Profit center group in source system

    Profit center group information is available in SAP(T-code:kch3). But, I want to have this information in BW too.
    Can anyone tell me how to create a datasource for Profit center group? And which SAP table is able to feed master data for this information?
    Many thanks
    rajatina.

    HI ,
    It looks lilke we need to use the FM like 'G_SET_LIST_SELECT' to get the Profit
    Here ais note from the forums to get profit center group from table
    From Table SETLEAF,  Field SETCLASS  =  '0106'. Field SUBCLASS with controlling area. Profit center in Field VALFROM.
    You will get Group name in Field SETNAME.
    Regards,
    Sathya

  • How to update profit center group?! Please help

    Hello All:
          We upgraded to ECC6.0 from 4.6C and I am getting an error below when I call some transaction that uses this profit center group:
    "Profit Center group XXXXXXXX not updated. The function is not supported for the selected object"
    Could anyone please tell me how to resolve this issue? All answers will be rewarded.
    Thanks.
    Mithun

    Thanks for the reply Rob. No, that is the only information I have! I just get a popup with that message!
    Thanks.
    Mithun

  • HOW TO DELETE PROFIT CENTER GROUP.

    i am trying to delete profit center group using tcode KCH2 it is not permiting to delete it showing error "Group 2122 is still in use" how to delete group.
    Moderator: Please, search SDN and avoid posting ijn CAPITAL letters

    HI,
    you can only delete the group if you ensure that it is not used anymore. in KCH2, use "Extras / Where-used List for group" functionality to identify where the group is used.
    Best regards, Christian

  • How to get profit center group and its description

    According to three tables(as below), i get profit center group, how to get its description？
    CEPC  (Profit Center Master Data Table)
    SETLEAF
    SETNODE
    PS:(Referrence to teh link fields in table)
    For Profit centre Group ( SETLEAF-SETNAME )
    Select BSEG-BUKRS / BSEG-PRCTR from BSEG.
    SELECT SINGLE SETNAME INTO WA_SETNAME
    FROM SETLEAF
    WHERE SETCALSS = '0106'
    AND SUBCLASS = BSEG-BUKRS
    AND VALFROM = BSEG-PRCTR
    i can get two records, why?

    Hi,
    I am not sure of the significance of this table...
    But looking at the table structure it is having LINEID as one of the key fields..
    So you can have more than one record for the same combination..
    Thanks,
    Naren

  • Data required on the basis of Profit center group.

    Hi,
        Is there any table or report from where we can find out the values of customer, cusotmer description, city, GL Account, GL description, amount, sales document or sales order on the basis of PROFIT CENTER GROUP.
    Means i need the above details on the basis of  profit center group.
    Can anybody suggest on this
    Regards,
    Shree.

    Hi:
    Using this report, you can display according to profit center wise, not as profit center group wise.
    All the details are displayed accordling according to your requirement.
    Select the screen layout and select the fields you required.
    The Standard report is
    FBL5N - Display/Change Line Items
    Please let me know if you need more information.
    Assign points if useful.
    Regards
    MSReddy

  • Unable to create the Profit center groups

    Hi,
    We have created new company codes in R3Dev and also created the
    validation rules for the same. We have assigned the Set ID's to the
    validation rules. These Set ID's gets created when profit center groups
    are created for the new company codes.
    We have transported the company code configuration settings and the
    validation rules to R3QA.
    Now in R3QA, when I try to create the profit center groups in KCH5N for
    the new company codes, it says "the group already exists".This is
    caused due to the SET ID's which also got transported along with
    validation rules. I have checked the table 'SETHEADER" which shows the
    SET ID's for the new company codes.
    Could you please a solution to resolve this issue.
    Thanks
    Rakesh

    Hi Mohan,
    Since Set Id's have moved to quality along with vaidation rules, I am to create the profit center groups, as it says the group already exists. I believe the set Id's need the master data maintained in R3Q, before they are transported. Since this is not maintained, with the transport, the data is sitting for Set Ids at the table level (Table: SETHEADER),  because of which I am to unable to create the profit center groups.
    Thanks,
    Rakesh

Maybe you are looking for

  • Is there a way to do innerMXML (just like innerHTML in js)?

    I have a case where a significant portion of the Flex page needs to be redrawn with different widgets, layout and data with certain user actions. I can do that in ActionScript but then I will need to go through the tedious job of instantiating contro

  • Error deploying to iPod touch after 2.0 upgrade

    Been in the developer program a while and haven't had any problems with putting apps to my iPod touch until now. Downloaded the release version of the SDK, then I started having problems. Also have purchased release 2.0 software for the Touch and hav

  • Windows installer malfunctio​n

    Hi......I have a Toshiba Satellite P505-A8980.  When I try to download a program from the internet, I get an error window as shown in the attachment. I found that if I create a new user, the download downloads just fine. I really do not want to start

  • Copy process instance with variables and state

    Hello, I want to make a kind of "snapshot" of my running BPEL instance. It should be possible to change some variable values of the snapshot and then continue the snapshot process with the changed parameters. Thus, I need to copy not only the BPEL de

  • Safari Firebug problem - Driving me crazy

    Several weeks ago I installed the Firebug Lite extension for Safari (Mavericks edition) and after removing the extension I still get the Firebug "half-page" is the best thing I can think of to call it. from the webpage I used it for. I have removed e