How to add the shipment costs in to material costs

Dear friends
I am implenting the transportation module.
In purchase process and STO processes, the client requirement is received material cost should be added with shipment cost.
I mean the material cost is 1000/-
The shipment cost is 100/-
Client Requirement: Freight liability should get loaded on the inventory being it is part of purchase cost.
Now the material cost: 1000+100
We are not entering the freight costs in PO.
We are creating the shipment cost documnets for calculating the ship.costs.
When we do the MIGO/Inbound delivery the system need to capture whole amount as a material cost.
With regards
Lakki

Dear Vinod,
Already i created the shipment cost document with reference to inbound delivey document.
Now the ship.cost value is 100/-
The material cost is 1000/-
But i want to show the accounting document for meterial document with 1100/-(Material cost and ship.cost)
But when we do the PGR, sys will generate the accounting document with material cost only, sys should not add the ship.cost. Because we didnot enter any ship.cost value in PO or delivery.
We are maintaining the ship.cost in saperate documents.
How to do that?
With regards
lakki

Similar Messages

How to add imort cash delivery duty to material cost

Dear Friends,
The requirement is like this:
We pay some import duties on cash on delivery basis. How could it be added to the material cost?We can not add it on PO as we get the invoice (like courrier charges) on delivery basis. Can we put it during IV.
Regards,
ASK

In SPRO,Activate direct postings in LIV,now material tab is activated in MIRO,You can directly debit
material to value of courier charges etc.
Based on invoice you can pay vendor in mode of cash.

How to Add the cost centre in the KSBB report

Hi Experts,
How can we add cost centre in KSBB report. Is it possible to add? if yes could any one guide me how to add the cost centre in KSBB report?
waiting for your replies,
Regards

Hi,
I see only three possible explanations:
a) no data on this cost centre
b) authorizations
c) 'hard-coded' filter in the relevant report (only if it's user-developed report)
Regards,
Eli

How to Add the Cost Element in Existing Zreport Painter

hi friends
i have issue with report painter
one Cost Element is not picked in Z Report which was created in Report painter
transaction data could be found in standard reports.
please expain how to Add the missing Cost Element in Existing ZReport
Point will be awarded.
Thanks

Check your sets first, if the cost element is missing from there, then change the set using GS02
Cheers
Prakash

SSRS 2008 Work order report , in sub total donot want to add the 0 level in ( how to add the expression )

working in Work order report, this report has different level , for example
0 level transaction
1 level transaction
in subtotal don't want to add 0 level transaction,
when I did the sub total it added all the level , so in sub total amount double up because of that
how to add the expression so I can the level 0 take out from sub total , so it does not include in sub total
can some one please help me with this
thanks in advance

Hi Simon_ Hou
I tried the expr the way you suggested , it did not work getting error message, the exp I added is below
this the expression I added on sub total where is highlighted in Yellow, under Cost amount column,
I really appreciate the help
=Sum(IIF(Fields!COLLECTREFLEVEL.Value=
"0",0,Fields!CostAMOUNT.Value),"DataSet1")
please see below my QUERY, can you please help and let me know what I did wrong in my exp
SELECT        PRODTABLE.PRODID, PRODCALCTRANS.COSTGROUPID, PRODTABLE.QTYCALC, PRODTABLE.PRODSTATUS, PRODCALCTRANS.COSTAMOUNT,
                         PRODCALCTRANS.COSTMARKUP, PRODCALCTRANS.REALCOSTAMOUNT, PRODCALCTRANS.CALCTYPE, PRODTABLE.DATAAREAID, PRODCALCTRANS.KEY3,
                         PRODCALCTRANS.CONSUMPVARIABLE, PRODCALCTRANS.REALCONSUMP, PRODTABLE.ITEMID, PRODTABLE.SCHEDDATE, PRODTABLE.FINISHEDDATE,
                         PRODCALCTRANS.KEY1, PRODCALCTRANS.TRANSDATE, PRODCALCTRANS.QTY, PRODCALCTRANS.KEY2, PRODCALCTRANS.COLLECTREFLEVEL,
                         PRODCALCTRANS.LINENUM
FROM            PRODTABLE INNER JOIN
                         PRODCALCTRANS ON PRODTABLE.PRODID = PRODCALCTRANS.PRODID AND PRODTABLE.DATAAREAID = PRODCALCTRANS.DATAAREAID
WHERE        (PRODTABLE.PRODSTATUS = 7) AND (PRODTABLE.DATAAREAID = N'AR1') AND (PRODTABLE.ITEMID = @itemid) AND
                         (PRODTABLE.FINISHEDDATE >= @Paramfromdate) AND (PRODTABLE.FINISHEDDATE <= @Paramtodate)

How to add the delete button

Hello Guru's and Experts.
I am working on a change request , the change request is as follows
Once a cost simulation is run for a maintenance item and the data transferred to BI, it cannot be deleted from BI, only overwritten with an updated cost simulation. In the instance where the such items are no longer required to be included in the simulation, it must be made possible to delete the simulation costs in BI.
The current design in my project significantly increases the effort required to identify unwanted cost simulations and greatly increases the potential for incorrect data to be used in Budgeting and forecasting.
My question is how to add the delete functionality in the report. is it acheavable through the portal or WAD,
iam new to SAP BI , if possible can anyone kindly suggest me the steps to do this functionality.
Appreciate your quick response..
Thanks
Ravi.

Hi Guru
Thanks for your valuable information.
We got the requirment changed now from the users , the delete button should display in the report, i mean in protal, Now the user wants to delete with the selection criteria, for example, once the user hits the row in the report, that means if he selects the Main work center, and selects the delete button , he wants all the data related to that main work center to be deleted. and another senario is what ever row the user selects the characteristics in the row, for example, if the user select for any row, i mean it can be any cost center or fiscal year, maintaiance item, cost elements, ..etc.
Once the user selects the row and hit the delete button, and he wants to hit the save save button in the report to make sure it deleted, the other way around , if the dont want to hit save, then he wants the data to be in the report.
In the above scenario's can you please suggest me with the steps how can we acheive it.
Please reply back if you need any other info., Apprieciate your quick response. its very urgent requirment which we have to start...
sorry to bother u..
Thanks
Ravi.

How to add the date field in the dso and info cube

Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KK

my prob is solved
KK

How to add the Match code object for the requisitioner field in TCODE ME51N

Hi,
How to add the search help (Match code object) for the requisitioner field in transaction ME51N.
Please do the needful to me.
Regards
Rajesh

don't you think that posting your question to a microsoft developer site would be more efficient?
regards,
anton

How to add the entries and how to delete the entries from custom Z-table?

Hi Experts,
My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
Here how to add the entries from program to Z-table.???
And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
Could you please guide me the logic how to crack this???
Let me know if you need more Info
Thanks
Sanju

Hi Sanjana,
What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
*Insert Statement
INSERT dbtab
Syntax
INSERT { {INTO target VALUES source }
| { target FROM source } }.
Effect
The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
System Fields
The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one row was inserted.
4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
The INSERT statement sets sy-dbcnt to the number of rows inserted.
Note
The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
*Modify Statement
MODIFY dbtab
Syntax
MODIFY target FROM source.
Effect
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
Note
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
Hope it helps...
P.S. Please award points if it helps...

How to add the property file..ie(default.properties) to a webdynpro project

Hi All,
How to add the property file..ie(default.properties) to a webdynpro project.
I urgently require the solution. Kindly get it for me.
Regards
DK

Hi DK,
this is described in the second Web Dynpro Java Tutorial
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/b1a3e990-0201-0010-aeb2-a2ef5bc3da8e">creating an Extended Web Dynpro Application</a>
Regards, Bertram

How to add the library of linphone into existing project ?

How to add the library of linphone into existing project ?

How to add the library of linphone into existing project ?

How to add the double headings in Alv Report.

Hi All,
Plz suggest me how to add the double headings in ALv Report.
Ram

Hi,
Try out this program....
REPORT ypm_historycard_rep.
TYPE-POOLS : slis.
DATA : it_cbm TYPE STANDARD TABLE OF mara.
DATA : it_layout TYPE STANDARD TABLE OF slis_layout_alv WITH HEADER LINE,
       wa_fcat TYPE slis_fieldcat_alv,
       it_fcat TYPE slis_t_fieldcat_alv.
START-OF-SELECTION.
SELECT *
FROM mara
INTO CORRESPONDING FIELDS OF TABLE it_cbm
where matnr = 'D80K7'.
END-OF-SELECTION.
it_layout-zebra = 'X'.
it_layout-colwidth_optimize = 'X'.
it_layout-f2code = '&ETA'.
APPEND it_layout.
DEFINE macro4fcat.
    wa_fcat-col_pos = &1.
    wa_fcat-fieldname = &2.
    wa_fcat-tabname = &3.
    wa_fcat-seltext_l = &4.
    append wa_fcat to it_fcat.
    clear wa_fcat.
END-OF-DEFINITION.
macro4fcat    '1' 'MATNR'         'IT_CBM'   'MATERIAL NO'    .
DESCRIBE TABLE it_cbm.
IF sy-ucomm = '&F03'.
    MESSAGE 'hi hello good morning "press enter button" this is quiz' TYPE 'S'.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program                = sy-repid
i_callback_html_top_of_page       = 'HTML_TOP_OF_PAGE'
is_layout                         = it_layout
it_fieldcat                       = it_fcat
   i_save                            = 'A'
TABLES
t_outtab                          = it_cbm
EXCEPTIONS
program_error                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form html_top_of_page
*       text
*      -->TOP        text
FORM html_top_of_page USING top TYPE REF TO cl_dd_document.
DATA: l_text(255) TYPE c.
DATA: text1(255) TYPE c.
DATA: t_header TYPE REF TO cl_dd_table_element ,
        wa_header TYPE REF TO cl_dd_table_area.
CALL METHOD top->add_gap
    EXPORTING
      width = 10.
CALL METHOD top->add_text
EXPORTING
    text          = 'hello'
    sap_style     = 'HEADING'
CALL METHOD top->add_gap
    EXPORTING
      width = 20.
CALL METHOD top->add_text
EXPORTING
    text          = 'HOW ARE YOU'
    sap_style     = 'HEADING'.
    CALL METHOD TOP->new_line
*      EXPORTING
*        repeat =
    CALL METHOD top->add_gap
    EXPORTING
      width = 50.
CALL METHOD top->add_text
EXPORTING
    text          = '____________________________________________________________'
    sap_style     = 'HEADING'.
    CALL METHOD TOP->new_line
*      EXPORTING
*        repeat =
    CALL METHOD top->add_gap
    EXPORTING
      width = 90.
CALL METHOD top->add_text
EXPORTING
    text          = 'YOU CAN TRY LIKE THIS'
    sap_style     = 'HEADING'.
ENDFORM.                    "html_top_of_page
Regards
Debarshi

How to add the report

how to add the report for jasper ,i am using jdeveloper tool to create project but how to add the report for the that project please help me

Make the broadcasting setting using BEx Broadcaster and schedule program RSRD_BROADCAST_STARTER in process chain for the required settings.
Regards,
Sree

How to add the Assignment column on this post outgoing payment in f-53

Hi all,
how to add the Assignment column on this post outgoing payment in f-53?
thanks.
Joo

Hi ,
If you want to see the assignment column in f-53 process open item screen
1. First in O7V3 check for t.code FBz2 which line layout ( 2 digit code is assigned)
2. Then in t.code O7z4s check in the line layout and if assignment field is not there then insert the field.
then check in F-53.
Hopw it will solve your problem.
Assign points if useful
Regards
Prabhat

How to add the Note board web part to a page with powershell

Hi everyone,
I've been looking around everywhere but haven't seen it explicitly mentioned.
Does anyone know how to add the Note Board web part to a Team Site page, e.g. Non-publishing site, Left Zone, First webpart in the zone in powershell?
Examples like this one http://adicodes.com/adding-web-part-to-page-with-powershell/ only talk about custom web parts uploaded from a local drive.
The example here looks good - http://spcrew.com/blogs/lists/posts/post.aspx?id=21 but is it for the Page Viewer Web Part. How would you go about getting the correct name for the note board web part and configuring it?
Many Thanks,
Ashley
function main(){
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
$url = "http://sp2010dev1/sites/test1"
$OpenWeb = Get-SPWeb $url
$OpenWeb
$OpenSite = Get-SPSite $url
$file = $OpenWeb.GetFile("http://sp2010dev1/sites/test1/SitePages/test1.aspx")
$WebPartManager = $file.GetLimitedWebPartManager([System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
Add-PageViewerWebPart "http://sp2010dev1/sites/test1" "http://sp2010dev1/sites/test1/SitePages/test1.aspx" "Body" 0 "SPCrew Site" "sp2010dev"
$OpenWeb.Dispose()
function Add-PageViewerWebPart($SiteURL, $pageUrl, $webpartzone, $index, $title, $content)
    $site = new-object Microsoft.SharePoint.SPSite($SiteURL)
    $web=$site.OpenWeb()
    $webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
    $webpart = new-object Microsoft.SharePoint.WebPartPages.PageViewerWebPart
    $webpart.ChromeType = [System.Web.UI.WebControls.WebParts.PartChromeType]::TitleOnly;
    $webpart.Title = $title
    $webpart.ContentLink = "http://www.spcrew.com";
    $webpartmanager.AddWebPart($webpart, $webpartzone, $index);
    $web.Close()
    $site.Close()
function Get-SPSite([string]$url) {
    New-Object Microsoft.SharePoint.SPSite($url)
function Get-SPWeb([string]$url) {
    $SPSite = Get-SPSite $url
    return $SPSite.OpenWeb()
    $SPSite.Dispose()

Hi,
According to your post, my understanding is that you wanted to add the Note board web part to a page with PowerShell.
The name of the Note Board web part is SocialCommentWebPart.
I recommend to use the powershell code below:
$pageUrl="http://sitename/SitePages/test.aspx"
$SiteURL="http://sitename"
$site = new-object Microsoft.SharePoint.SPSite($SiteURL)
$web=$site.OpenWeb()
$webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
$webpart = new-object Microsoft.SharePoint.Portal.WebControls.SocialCommentWebPart
$webpart.title="Note Board"
$webpartmanager.AddWebPart($webpart, "MiddleZone", 0);
$web.Close()
Then the Note board web part will be added to the page.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to add the shipment costs in to material costs

Similar Messages

Maybe you are looking for