How to add the space

Hi all,
i need to add a space in below directory
oracle/sid/102_64 this directory is full it's showing 100%.
Can you please guide me how to increase the same.
Thanks &Regards
srikumar

Hi Srikumar,
You have posted on the wrong forum. Please close it and find your answer on the related forum.
Thanks,
Gordon

Similar Messages

How to add a SPACE as suffix to the last field in the downloaded text file?

Hi Experts,
By using GUI_DOWNLOAD am saving the data(only 3 fields) in a text file on my desk top.
fine.
example current record1 : 010001 354.999 26.000
here, after 3rd field 26.000, immediately the cursor is jumping to next line in text file.
but, wanna a SINGLE SPACE after 26.000, say 26.000+space.
tried with CONCATENATE, OFFSETTING, but no use(may b am using incorrectly)
so, pls. suggect me, How to add a SPACE as suffix to the last field in the downloaded text file?
thanq

Sorry...Typo error...Too many in the last few days -:(
Wanted to say AFTER -:)
Do it like this...
FIELD1 TYPE XXX,
FIELD2 TYPE XXX,
FIELD3 TYPE XXX,
SPACE(1) TYPE C,
That way you should end with...
26.000+SPACE
Greetings,
Blag.

How to adjust the space between images in a carousel or images with horizontal scroll

I use the next steps to create a carousel or horizontal scroll of images:
Webcenter portal: Spaces
Spaces
Manage Settings
Pages
Create page
Content management
Content presenter
Add images with Plus Icon
It works, but between every image has a lot of space, can you tell me how to reduce the space between every image.
My Oracle Version 11gR1 (11.1.1.3.0)
Regards
Tomas Reyes

Remove line 234 in your HTML code.
<p>& n b s p</p>
This is a redundant line of code. Your spacing should get resolved.
PS: I've given spaces between the tag because otherwise this forum would not display the line correctly.

How to manage the space between a table and its title?

Have tables where titles are very close to the main text and need a couple of points to separate these elements. How to reshape this space?
1. Titles were separated by a return that is not visible... (any code is revealed by ID)
2. When a Return is inserted after the title, nothing happens aparently, but this return is now visible and could be used as a «paragraph space after» value:
3. A solution could be Grep to catch the end of paragraph assigned to titles to insert a return;
but Grep only catches the right border of the table (the yellow mark shows the big blinking cursor);
Grep cannot see the end of paragraph in the tables's title.
It another method?
Basically, how to modify the space between a table and ists title

I think you and Bob are not in synch here.
Bob suggested that you could use paragraph spacing, but for that to work you do need to use separate paragraphs for the title and table, which you don't seem to be doing. Using GREP to find the end of the paragraph only works if there IS and end to the paragraph. As far as I know there is now meta-character to use in Find/Change that would allow you to find a table and insert a paragraph break ahead of it, but I bet it could be scripted.
I'm not quite sure what you were trying to find in the GREP you posted. Did you actually have a paragraph return inserted already after the title? In that case you only need to redefine the style for that paragraph to add the space (or redefine the style for the paragraph that holds the table itself). You don't need the GREP. But the reason it does nothing is that you've found a location -- the end of the paragraph, but haven't found any actual text to modify. To do anything you would need to use something like .$
But back to NOT having a separate paragraph... If you put the cursor in any table cell and go to Table Options > Table Setup tab you'll see fields to set space before and after the table that should do what you want. That was the second part of what he posted.

How to add the date field in the dso and info cube

Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KK

my prob is solved
KK

SSRS 2008 Work order report , in sub total donot want to add the 0 level in ( how to add the expression )

working in Work order report, this report has different level , for example
0 level transaction
1 level transaction
in subtotal don't want to add 0 level transaction,
when I did the sub total it added all the level , so in sub total amount double up because of that
how to add the expression so I can the level 0 take out from sub total , so it does not include in sub total
can some one please help me with this
thanks in advance

Hi Simon_ Hou
I tried the expr the way you suggested , it did not work getting error message, the exp I added is below
this the expression I added on sub total where is highlighted in Yellow, under Cost amount column,
I really appreciate the help
=Sum(IIF(Fields!COLLECTREFLEVEL.Value=
"0",0,Fields!CostAMOUNT.Value),"DataSet1")
please see below my QUERY, can you please help and let me know what I did wrong in my exp
SELECT        PRODTABLE.PRODID, PRODCALCTRANS.COSTGROUPID, PRODTABLE.QTYCALC, PRODTABLE.PRODSTATUS, PRODCALCTRANS.COSTAMOUNT,
                         PRODCALCTRANS.COSTMARKUP, PRODCALCTRANS.REALCOSTAMOUNT, PRODCALCTRANS.CALCTYPE, PRODTABLE.DATAAREAID, PRODCALCTRANS.KEY3,
                         PRODCALCTRANS.CONSUMPVARIABLE, PRODCALCTRANS.REALCONSUMP, PRODTABLE.ITEMID, PRODTABLE.SCHEDDATE, PRODTABLE.FINISHEDDATE,
                         PRODCALCTRANS.KEY1, PRODCALCTRANS.TRANSDATE, PRODCALCTRANS.QTY, PRODCALCTRANS.KEY2, PRODCALCTRANS.COLLECTREFLEVEL,
                         PRODCALCTRANS.LINENUM
FROM            PRODTABLE INNER JOIN
                         PRODCALCTRANS ON PRODTABLE.PRODID = PRODCALCTRANS.PRODID AND PRODTABLE.DATAAREAID = PRODCALCTRANS.DATAAREAID
WHERE        (PRODTABLE.PRODSTATUS = 7) AND (PRODTABLE.DATAAREAID = N'AR1') AND (PRODTABLE.ITEMID = @itemid) AND
                         (PRODTABLE.FINISHEDDATE >= @Paramfromdate) AND (PRODTABLE.FINISHEDDATE <= @Paramtodate)

How to add the Match code object for the requisitioner field in TCODE ME51N

Hi,
How to add the search help (Match code object) for the requisitioner field in transaction ME51N.
Please do the needful to me.
Regards
Rajesh

don't you think that posting your question to a microsoft developer site would be more efficient?
regards,
anton

Can't figure out how to maximize the space on the page by increasing the column width

Trouble with pages app:
can't figure out how to maximize the space on the page by increasing the column width
I have 3 columns and they have spaces btw them that I cannot close the gap on.

Whatever the version, you can click on the gutter figure and edit it.
Click once on the column and a second time on the Gutter measurement.
Peter

How to add the entries and how to delete the entries from custom Z-table?

Hi Experts,
My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
Here how to add the entries from program to Z-table.???
And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
Could you please guide me the logic how to crack this???
Let me know if you need more Info
Thanks
Sanju

Hi Sanjana,
What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
*Insert Statement
INSERT dbtab
Syntax
INSERT { {INTO target VALUES source }
| { target FROM source } }.
Effect
The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
System Fields
The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one row was inserted.
4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
The INSERT statement sets sy-dbcnt to the number of rows inserted.
Note
The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
*Modify Statement
MODIFY dbtab
Syntax
MODIFY target FROM source.
Effect
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
Note
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
Hope it helps...
P.S. Please award points if it helps...

How will check the space taken by a single table in a tablespace ?

How will check the space taken by a single table in a tablespace ?
dba_segments is giving the same values even if I truncate the table?
Pls reply

I need to know how can we find out the size of the table in the tablespace.use user_segments (bytes) column.
How much bytes it has taken ?value from user_segments, bytes column
If u delete records will the space be used for another table in same tablespace?No, it keep the space in the same table for future usage.
How can we free that space ?truncate or drop the table and reduce the size from tablespace, if you want to reclaim the space from the tablespace, OS level.
Jaffar

How to add the property file..ie(default.properties) to a webdynpro project

Hi All,
How to add the property file..ie(default.properties) to a webdynpro project.
I urgently require the solution. Kindly get it for me.
Regards
DK

Hi DK,
this is described in the second Web Dynpro Java Tutorial
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/b1a3e990-0201-0010-aeb2-a2ef5bc3da8e">creating an Extended Web Dynpro Application</a>
Regards, Bertram

How to add the library of linphone into existing project ?

How to add the library of linphone into existing project ?

How to add the library of linphone into existing project ?

How to add the double headings in Alv Report.

Hi All,
Plz suggest me how to add the double headings in ALv Report.
Ram

Hi,
Try out this program....
REPORT ypm_historycard_rep.
TYPE-POOLS : slis.
DATA : it_cbm TYPE STANDARD TABLE OF mara.
DATA : it_layout TYPE STANDARD TABLE OF slis_layout_alv WITH HEADER LINE,
       wa_fcat TYPE slis_fieldcat_alv,
       it_fcat TYPE slis_t_fieldcat_alv.
START-OF-SELECTION.
SELECT *
FROM mara
INTO CORRESPONDING FIELDS OF TABLE it_cbm
where matnr = 'D80K7'.
END-OF-SELECTION.
it_layout-zebra = 'X'.
it_layout-colwidth_optimize = 'X'.
it_layout-f2code = '&ETA'.
APPEND it_layout.
DEFINE macro4fcat.
    wa_fcat-col_pos = &1.
    wa_fcat-fieldname = &2.
    wa_fcat-tabname = &3.
    wa_fcat-seltext_l = &4.
    append wa_fcat to it_fcat.
    clear wa_fcat.
END-OF-DEFINITION.
macro4fcat    '1' 'MATNR'         'IT_CBM'   'MATERIAL NO'    .
DESCRIBE TABLE it_cbm.
IF sy-ucomm = '&F03'.
    MESSAGE 'hi hello good morning "press enter button" this is quiz' TYPE 'S'.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program                = sy-repid
i_callback_html_top_of_page       = 'HTML_TOP_OF_PAGE'
is_layout                         = it_layout
it_fieldcat                       = it_fcat
   i_save                            = 'A'
TABLES
t_outtab                          = it_cbm
EXCEPTIONS
program_error                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form html_top_of_page
*       text
*      -->TOP        text
FORM html_top_of_page USING top TYPE REF TO cl_dd_document.
DATA: l_text(255) TYPE c.
DATA: text1(255) TYPE c.
DATA: t_header TYPE REF TO cl_dd_table_element ,
        wa_header TYPE REF TO cl_dd_table_area.
CALL METHOD top->add_gap
    EXPORTING
      width = 10.
CALL METHOD top->add_text
EXPORTING
    text          = 'hello'
    sap_style     = 'HEADING'
CALL METHOD top->add_gap
    EXPORTING
      width = 20.
CALL METHOD top->add_text
EXPORTING
    text          = 'HOW ARE YOU'
    sap_style     = 'HEADING'.
    CALL METHOD TOP->new_line
*      EXPORTING
*        repeat =
    CALL METHOD top->add_gap
    EXPORTING
      width = 50.
CALL METHOD top->add_text
EXPORTING
    text          = '____________________________________________________________'
    sap_style     = 'HEADING'.
    CALL METHOD TOP->new_line
*      EXPORTING
*        repeat =
    CALL METHOD top->add_gap
    EXPORTING
      width = 90.
CALL METHOD top->add_text
EXPORTING
    text          = 'YOU CAN TRY LIKE THIS'
    sap_style     = 'HEADING'.
ENDFORM.                    "html_top_of_page
Regards
Debarshi

How to add the report

how to add the report for jasper ,i am using jdeveloper tool to create project but how to add the report for the that project please help me

Make the broadcasting setting using BEx Broadcaster and schedule program RSRD_BROADCAST_STARTER in process chain for the required settings.
Regards,
Sree

How to add the Assignment column on this post outgoing payment in f-53

Hi all,
how to add the Assignment column on this post outgoing payment in f-53?
thanks.
Joo

Hi ,
If you want to see the assignment column in f-53 process open item screen
1. First in O7V3 check for t.code FBz2 which line layout ( 2 digit code is assigned)
2. Then in t.code O7z4s check in the line layout and if assignment field is not there then insert the field.
then check in F-53.
Hopw it will solve your problem.
Assign points if useful
Regards
Prabhat

How to add the space

Similar Messages

Maybe you are looking for