How to add the "Voltage Calibration"in the DCpower for IVI drive??

To gather more information concerning the use of IVI there is a very comprehensive page of Class Specifications for IVI Class Instruments:
www.ivifoundation.org
This resource covers all IVI calls for each class of instruments and should provide you wiht valuable information. For an additional overview of IVI and its relationship to NI products, you can also visit our Resource Library:
ni.com>>Resource Library>>Instrument Drivers
Best Regards,
Chris D
Applications Engineer
National Instruments

Similar Messages

How to add A single row at the middle of the table in a Webi report

Hi,
I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
Thanks in advance
Regards
Monika

Hi Monika,
It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
Can you explain in more detail what you are trying to do?
Thanks

I am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going of

i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?

Hi Jay,
Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
"Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
Regards,
Barry

How to add a radio station to the library

just loaded itunes 6 (windows box) and can't find out how to add a radio station to the library

If your current stations in WMP are .pls or .m3u URL's, they may work in iTunes also. Use the "Open Stream" command from the Advanced menu and put in the URL that includes .pls/.m3u. If the URL is a .mwv variety, those are Windows proprietary format and not supported by iTunes. Same with .ra streams (Real Audio).
.pls & .m3u usually indicate MP3 based streams supported in iTunes. It's up to the original radio station/streaming site to select the format and make it available. Shoutcast.com & Live365.com are great resources for mp3 based streams.

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

How to add a text box in the layout (View)

How to add a text box in the layout (View)

Hi.
Right Click in the RootUIElement container.
Click Insert Element.
Give Name: Input
Type : Input Field.
Press Enter.
Regards
Bala.

How to add an extra page to the index.html page on dreamweaver CS6?

How to add an extra page to the index.html page on dreamweaver CS6?

Index.html = your domain's home page. There is only one home page per site.
To create a new page from your index, go to File > SaveAs > filename.html. Repeat for other site pages. Add links on your index page that lead to other site pages.
See Creating your first web site in DW CC (5-part tutorial)
https://helpx.adobe.com/dreamweaver/learn/tutorials/how-to/first-website-part1.html
Nancy O.

How to add 'Confidential' watermark to all the pages in portal

Hi
How to add 'Confidential' watermark to all the pages in portal.We have ESS/MSS business packages installed 60.1, 60.2.
ECC5, EP SP16 is the environment.
Help will be appreciated
Thanks
Sharath

Hi Sharath,
What about using the theme editor to add a background to either the page or the iView tray?
Daniel

[SOLVED] How to add modules to build with the kernel?

Hello i´m trying to learn how to build my own custom kernel and doing it the arch way https://wiki.archlinux.org/index.php/Ke … raditional. But unfortunately dm-crypt was not included in the kernel so it all failed.
svart_alg% sudo mkinitcpio -k 3.15.6 -c /etc/mkinitcpio.conf -g /boot/initramfs-test.img
==> Starting build: 3.15.6
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [lvm2]
==> ERROR: module not found: ‘dm-snapshot’
-> Running build hook: [encrypt]
==> ERROR: module not found: ‘dm-crypt’
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> WARNING: No modules were added to the image. This is probably not what you want.
==> Creating gzip initcpio image: /boot/initramfs-test.img
==> WARNING: errors were encountered during the build. The image may not be complete.
I have never don any of this before and have no idea of how to add a missing module to the kernel i´m building. So i search on internet and had a very hard time finding a good guide for this but i fond one possible solution. https://www.kernel.org/doc/Documentatio … odules.txt
svart_alg% make -C /home/nigro_alko/Kernel/linux-3.15.6 M=/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in
make: Entering directory ‘/home/nigro_alko/Kernel/linux-3.15.6‘
mkdir: cannot create directory ‘/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in’: Not a directory
scripts/Makefile.build:44: /home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in/Makefile: Not a directory
make[1]: *** No rule to make target ‘/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in/Makefile’. Stop.
Makefile:1310: recipe for target ‘_module_/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in’ failed
make: *** [_module_/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in] Error 2
make: Leaving directory ‘/home/nigro_alko/Kernel/linux-3.15.6‘
So is there any one that have time to help a lost little newbie i would bee very happy :-)
Last edited by Moosey_Linux (2014-07-29 15:00:40)

karol wrote:Why do you want a custom kernel in the first place?
Moosey_Linux wrote:i´m trying to learn how to build my own custom kernel
Reason enough IMO. But anyway... you refer to the Traditional build method in the wiki, but is it possible you didn't really read it? Or maybe you only skimmed it? Did you run make menuconfig? Did you try to build everything in instead of using modules? That mkinitcpio output suggests that you did.
As suggested there for first-timers, it's a good idea to start with a kernel configuration that is known to work - the Arch config is the obvious choice, but there are other sources e.g. http://kernel-seeds.org/ .

How to add page numbers (centred) at the foot of a page?

Even this is confusing!
I typed my question hit return and was told I couldn't post a blank message.
How do I post my message?
I simply want to know how to add a page number at the foot (centred) of a page.
Oh! Great! Now I see, I should have known to scroll way down to find "post message".
Anne

What kind of document: word processing? Spreadsheet? something else?
What program are you using to create the document?

An you tell me how to add an advanced action to the TEB so you can check for multiple lines of input

an you tell me how to add an advanced action to the TEB so you can check for multiple lines of input? How do you add the advanced action?

Can you elaborate your requirement?
If you want to have a text wrapped around and enable a scroller for the same, you can achieve it by TEB properties and check the scroll bar option,
Is this what you are looking to achieve?
Thanks,
Anjaneai

How to add more summary data in the MIP of Compensation workbench

Hi all,
In the MIP (incentive plan) of the compensation workbench, we need to add more summary data in the summary section. I checked that all the summary data in that section are stored in the table 'ben_cwb_summary'.
Even we can change the VIEW object for that page (using extension), we can't retrieve it because the new summary data/information we need to add are not stored in the table 'ben_cwb_summary'. We need to write our query to summerize data.
How to implement it?
Thanks in advanced!
Jane

faiz2000 wrote:
> How to add more one record in the same time?
>
> Please I need your help to add more one record in the
same time, how can I do
> that?
>
> I have only one text field and the value it is linked
from other table, if
> user he bushes bottoms the all data it will copy it to
new record:
>
> Ex.: <input name="textfield" type="text"
>
value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
>
>
Use "Repeat Region"
Mick

How to add user defined tab in the Header level of T-Code O4NM?

How to add user defined tab in the Header level of T-Code O4NM?
I tried with BADI but I cant able to find any BADI for it and also searched for screen exit too..

Can you check the user exits,
OIJNOM_N and OIJTKT_N
Cheers,
Balaji

CWB: how to add more summary data in the summary section

HI All,
We need to add more summary data in the summary section. Some summary data need to calculated dynamically like (summary data A /summary data B).
under the worksheet, there is a link:
Personalize Dynamic Columns
But this link allows to create Dynamic Columns for the worksheet, but not for summary setion.
Is any way to add more summary data in the summary section through personalization instead of customization (VO extension)?
Thanks in advanced!
Jane

faiz2000 wrote:
> How to add more one record in the same time?
>
> Please I need your help to add more one record in the
same time, how can I do
> that?
>
> I have only one text field and the value it is linked
from other table, if
> user he bushes bottoms the all data it will copy it to
new record:
>
> Ex.: <input name="textfield" type="text"
>
value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
>
>
Use "Repeat Region"
Mick

How to add a DTD Reference to the payload ??

Hi All,
How to add a DTD Reference to the payload using graphical mapping ??
For eg:
Current Output
============
<?xml version="1.0" encoding="UTF-8" ?>
<dcsextractdata extractname="">
<dataheaders>
<dataheader>
<record_type datatype="123" />
<action datatype="CHAR">E</action>
<code>FK</code>
</dataheader>
</dataheaders>
</dcsextractdata>
Required Output
============
<?xml version="1.0" encoding="UTF-8" ?>
<b><!DOCTYPE dcsextractdata SYSTEM "../lib/ftgppl.dtd"></b>
<dcsextractdata extractname="">
<dataheaders>
<dataheader>
<record_type datatype="123" />
<action datatype="CHAR">E</action>
<code>FK</code>
</dataheader>
</dataheaders>
</dcsextractdata>
Thanks in Advance
Regards,
Chemmanz

Hi Chemmanz,
your req of adding DTD ref cant be achieved by graphical mapping.......
you can achieve your this req by making a J2EE adapter module and then deploying it in XI and then calling this module in your recever file comm channel...
Thanks,
Rajeev Gupta

How to add the "Voltage Calibration"in the DCpower for IVI drive??

Similar Messages

Maybe you are looking for