How to add this type of effect in photoshop plugin

How to add this type of effect in photoshop by plugin

Well, if that's the best you can do in describing what you consider an "effect" in this image, it will take a mind reader or clairvoyant to figure it out.
All I see is a guy that looks a lot like the infamous sex-slave-and-women-trafficker Saban Baran, possibly wearing a rug on his usually bald shaven head.
http://tinyurl.com/jw5lmzy
If it's someone else and that is real hair, then someone may have selected the hair in Photoshop and applied a tiny bit of the Oil Filter on it. The Oil Filter has been removed from the newest versions of Photoshop.

Similar Messages

How to do this type off effect in Adobe?

Hello guys.
How can i do this kind of color effect in Premiere in this video at 1:40? http://www.youtube.com/watch?v=4uoYk79Z_G4anks
Thanks.

It is a lot easier to see what they did if you download the video in order to be able to look at it frame by frame.
To me, it looks like a combination of the levels effect and a 3 Way Color Corrector (or maybe just a Fast Color Corrector.) Then again, it might be an exaggerated Lumetri Look or something similar.Or, it may very possibly be a third part effect acting like a transition. No matter. There are lots of imaginative ways to do things like that if you so desire. Even using color mattes with different blending modes.
For example. here are some screen shots. Watch the timecode indicator - these all happen pretty fast..

How to add Material type(MTART) field on Selection screen of MB5B transaction code.

Hi All,
    Please let me know how to add material type field on selection screen of MB5B transaction
For that i made copy ZMB5B_COPY of original report RM07MLBD.
Thanks in adv .
Samadhan

Hi,
Once you copied the standard report to Z report, you can MTART in selection screen like below.
and in order to inlcude the same in programming logic, we have three option.
1) Check all related select queries, and include MTART in SELECT query using inner join with MARA.
2) In START-OF-SELECTION event fill MATNR as shown below.
3) If user entered any value in MTART, then before displaying the report just check material type of each material in the final internal table(which is used to display report) delete enteries from internal table accordingly.
START-OF-SELECTION.
IF MTART[] IS NOT INITIAL AND MATNR[] IS INITIAL.
    SELECT MATNR FROM MARA INTO MATNR-LOW WHERE MTART IN MTART.
      MATNR-OPTION = 'EQ'.
      MATNR-SIGN = 'I'.
      APPEND MATNR.
      CLEAR MATNR.
    ENDSELECT.
ENDIF.
The above option has one limitation: The selection screen variables has some restriction, please read the below thread.
Facing problem in select statement dump DBIF_RSQL_INVALID_RSQL CX_SY_OPEN_S
Getting Dump in the select query has more than 2000 entries
Hope this will work for you .
regards,
Rajesh Sadula.

How to add this mp3 player in my movie flash

How to add this mp3 player in my movie flash. This mp3 player
was generated in other web site and after i created what i got back
was this :
<center><embed src="
http://www.mp3asset.com/swf/mp3/myPod.swf"
quality="high" wmode="transparent"
flashvars="myid=3597756&path=2007/07/31&mycolor=0xAFC0D4&mycolor2=0x422F21&mycolor3=0xFFF FFF&autoplay=true&rand=0&f=3"
width="180" height="380"
name="myflashfetish" align="middle"
type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
/><br>I made this <a href="
http://www.myflashfetish.com"
target="_blank">MySpace Music Player</a> at <a href="
http://www.myflashfetish.com"
target="_blank">MyFlashFetish</a>.com.</center><br><br>
THIS CODE CAN BE ADDED IN ANY WEB PAGE BUT WHAT I WANTED TO
KNOW IS HOW CAN I PUT THIS INSIDE OF MY FLASH MOVIE???? THANK YOU
PLEASE HELP ME !!!!!!!!!!!!!

use the same method that i posted in your other topic, but
use a new empty movie clip with new instance name and replace the
"URL" with
http://www.mp3asset.com/swf/mp3/myPod.swf"

Particle effect -how to achieve this kind of effect exactly

Hello please help me to achieve this type of flickering particle effect. how to achieve this in After effect which is shown at 0.8 sec to 0.11 in the attached link video. http://www.istockphoto.com/stock-video-2682258-hearts.php

I can't give you the exact settings but you could use Trapcode Particular with a custom particle or CC Particle world. Just turn gravity to 0 and set up a custom particle.
Your particle layer will be behind the spinning hearts layer. This should get you going in the right direction.

I buy my iphone 5 in uae but i live in other country i want use a facetime how can add this feature to my iphone 5 please help me

i buy my iphone 5 in uae but i live in other country i want use a facetime how can add this feature to my iphone 5 please help me

If you wanted FaceTime, you should not have purchased your phone in the UAE. There is no way to add it back to your phone, as it has been permanently removed.

I created a navigation page and published as portlet now how to add this pg

I created a navigation page and published as portlet now how to add this page... i dont see in the portlet staging area.... i left the check mark publish as portlet on when i created the page...
how do i add this to the page...

The Navigation Page Portlet should be available in the Portlet Repository - select Published Portal Content -> Your Page Group Name
Lisa

How to add this two fields AUGBL & ZLSCH in FBL3 in abap 3.1 version

How to add the clearing document no. & payment method in FBL3 tcode. Can any one explain me step by step process how to add that two fields. This is ABAP 3.1 version. It's urgent requirement.
Moderator Message: Duplicate thread locked. Please carry on with this thread: How to add this two fields AUGBL & ZLSCH in FBL3 in abap 3.1 version
Message was edited by: Suhas Saha

Did you read the note provided in How to add this two fields AUGBL & ZLSCH in FBL3 in abap 3.1 version ?
Regards,
Raymond

How to get "Layer Mask Hides Effects" from Photoshop Plug-in

How to get "Layer Mask Hides Effects" from Photoshop Plug-in.

I don't think there's enough information here to give an answer. Is this a Plug-in that you're writing or intend to write? If so, what type of Plug-in is it?
If you are writing your own plug-in, the header files included in the Photoshop SDK/API have a bunch of defines for the proper codes to use.
PITerminology.h has a large amount of keys that can be used to query for information. PIUGetInfo is probably the function that you want to call to determine what you need to know.
If you're looking for information about a specific layer, you will want to make a new PIActionDescriptor, call sPSActionDescriptor->Make(*PIActionDescriptor), and then call GetLayerInfo on the layer that you're querying information about.
You can then call sPSActionDescriptor->Get<datatype> on the layer while passing in the key of the data that you want.

I can not add the warning before buying an app. Could you please explain how to add this warning

Please tell me how to add the warning before purchasing an app?

Hey klw67
Thanks for the question. Are you referring to the prompt for your password? If so, this can be achieved by utilizing the Restrictions (parental controls) of the specific device. For information on setting up and using Restrictions, see this resource:
iOS: Understanding Restrictions (parental controls)
http://support.apple.com/kb/HT4213
You can prevent access to specific content types:
- You can also adjust the time necessary before a password is required to purchase content.
Thanks,
Matt M.

How to add Live Type in the external editor windows?

I was just refreshing myself by one of the FCP dvds from magent media where Even Schechtman show his window of External Editors in System Settings.
I have the latest FCP version but that line which reads "Live Type" in external editor window is missing. Though he didnt discuss anything on the dvd but made me curious of my observation.
How Can I add Live Type message box which can be checked in External editor Window?
Thanks

This is something specific to FCP4.x ... it does not appear in FCP5.x
Final Cut Pro HD: LiveType does not appear in the External Editors tab
Under some circumstances, the External Editors tab (choose Final Cut Pro HD > System Settings) in Final Cut Pro HD does not display a setting for "LiveType Movie Files."
This can happen if you installed Final Cut Pro HD from a new Final Cut Pro HD disc, as opposed to installing it from an upgrade. If you upgraded from Final Cut Pro 4 to Final Cut Pro HD, you will not have this issue. If you upgraded from an earlier version of Final Cut Pro using an upgrade disc, you will not have this issue.
You can still add LiveType files to the timeline even if LiveType does not appear in the External Editors tab. The behavior may be slightly different, depending on whether you add a LiveType project file or a LiveType movie file to the Timeline.
If you add a LiveType project file (for example, MyProject.ipr) to the Timeline and then choose to open it in an External Editor, the file will open automatically in LiveType as a LiveType project.
If you add a rendered LiveType movie file to the Timeline and then choose to open it in an External Editor, the file will open in the Editor you've selected for Video Files (in the External Editors tab) or in QuickTime Player if none is selected.
In summary, "LiveType Movie Files," only appears if you upgrade to Final Cut Pro HD from an earlier version of Final Cut Pro 4. It is not required in the External Editors beacuse a LiveType project file will automatically open in the LiveType application and a movie rendered from LiveType will automatically open in QT Player.
http://docs.info.apple.com/article.html?artnum=300451

How to add in render, lighting effects filter?

Anyone know how to add in this filter? Render, lighting effects.

Which version of photoshop and operating system are you using?
You looked under Filter>Render>Lighting Effects?

Is it possible to create this type of EFFECT in After Effect

http://www.simonbronson.com/#326097/hmv-xmas-2009
Is it possible to do This type of Graphic Effect in After Effect..?

I assume that you're referring to the twisty 3D ribbons.
Zaxwerks 3D Serpentine is good for that:
http://zaxwerks.com/3dserpentine/index.shtml

How to add this spectrum bar in labview?

anyone knows how to add the spectrum bar ( see attached file, arrow6) in labview and make the plot displays different color when Y value falls to different range?
many thanks
Message Edited by lksusier on 11-12-2008 10:12 PM
Solved!
Go to Solution.
Attachments:
intensitygraphchart.png ‏68 KB

Try this.
LabVIEW Champion . Do more with less code and in less time .

How to get this type of class?

Hi. I'm trying to make a class like Math which i can run his methods without declaring an object.
I want this:
MyClass.method();
not this:
MyClass a = new MyClass();
a.method();
How can i do it? And what's the name of this type of classes?

I have planed to use it with a class which read a text
file like a database and return an object with the
filled fields.
Do you think i should create an instance or with
static methods is right?Without more details, I can't say for sure, but it sounds like something I would do as an instance method, rather than a class (i.e., static) method. The reason to create instances is because they hold state. The satte of an instance of your class might be the file it's responsible for or how big a buffer it has or something. Even if there's no real clear-cut state associated with what you're trying to do, I'd still use instance methods, just to get you into good habits and get practice thinking in OO terms. Resist the temptation to make everything static for now unless you have pure function-like behavior, as the Math class does.

How to add this type of effect in photoshop plugin

Similar Messages

Maybe you are looking for