How to add toolbar.
I would like to know how to add the toolbar that the adobe website has where you can bold text a spell check? Also can i customize the amount of options in the toolbar?
Ok I see that if I add the toolbar view as a subview of the table view, I can't see the toolbar. I can get it to show up if I add it to the main window, but then the navigation controller cannot push and pop entire view, and I will have to figure out when navigation controller pushes and pops and will have to add and remove subview manually. There has to be a better way?
I thought I got it to work, by adding a [self.view addSubview:toolbar], but it adds it to the actual table view, so it moves with the cells. How can I make it like the Navigation Bar?
Note I read the View Controller Guide and Table View Guide, but it does not mention toolbars or subviews.
Brian
Similar Messages
-
How to add toolbar of buttons in APEX !!!!
Hi Everyone,
Can we add button toolbar in APEX as we used to add in Oracle Forms 10g like Enter Query, Execute Query buttons? If yes then how we can add it and where we will add trigger?
Thanks in advance,
Yousuf.Hi Rohit,
Unfortunately, there is no configuration which allows having the actual total work in "my tasks" page. Note that you have the total for the period for each assignment in the column next to the "work" column. In case it doesn't suit
your need, I'd suggest to propose for example a simple report, otherwise a development could be quite complex and time consuming.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
How to add toolbar to TableViewController with IB?
I am trying to figure out Interface Builder, and want to add a toolbar to be displayed in a navigation-based project. This is what I did, but what am I missing?
1) I added IBOutlet UIToolbar *toolbar; to RootViewController.h with properties and systhesize.
2) I added a toolbar to the RootViewController IB document.
3) In IB I connected toolbar IBOutlet object to Toolbar in Outlets.
4) I can't figure how to alloc and init object. I have tried a few things but nothing shows up. Any help would be appreciated.
Thanks,
BriOk I see that if I add the toolbar view as a subview of the table view, I can't see the toolbar. I can get it to show up if I add it to the main window, but then the navigation controller cannot push and pop entire view, and I will have to figure out when navigation controller pushes and pops and will have to add and remove subview manually. There has to be a better way?
I thought I got it to work, by adding a [self.view addSubview:toolbar], but it adds it to the actual table view, so it moves with the cells. How can I make it like the Navigation Bar?
Note I read the View Controller Guide and Table View Guide, but it does not mention toolbars or subviews.
Brian -
How to add toolbar to ecl viewer in bsp application
i took help of the following link
/people/durairaj.athavanraja/blog/2005/09/14/using-ecl-engineering-client-3d-viewer-viewer-in-bsp-application
the 3D image in opening properly.
My question is, is it possible to add the TOOLBAR in the Internet explorer which get normally in Ecl Viewer which has the options like file tools etcHi Chinnu,
First find decide in which tab you want to display the field. Find out the screen structure behind the field group and check whether the field is present in it.
if yes all you need is to add this field in the field group structure other wise you have to add the field in the screen structure and then in the field group.
Reward if helpful.
Regards,
Naveen -
How to Add C3PO Toolbar Buttons with GroupWise in C#
Hello
i try How to Add C3PO Toolbar Buttons with GroupWise in C#. I do all like
i read here
http://support.novell.com/techcenter...a20000906.html
But i can see any result
i create file with Wizard(witout project)
Then i add this file to my EXE project
and add 2 button "Reg C3PO"(RegC3po();) and "Unreg C3PO"(UnRegC3po();)
and init
what i do wrong?
i try find ansver but find only this
http://newsportal.novell.com/article...sup.gwc3po#925
what its mean?
news:SR%Zg.16416$[email protected]:
about this question
http://newsportal.novell.com/article...sup.gwc3po#673
C3POs still don't work in the address book?
KirillKirill wrote:
> Hello and Merry Chritmas :)
>
> regsvr32 onlu for DLL. My project create EXE file :(
>
> Kirill
Ups......
You'll, according to the readme generated by your C3PO Wizard, have to run
Regasm.exe <your C3PO server>
That will create the needed regkeys...
Also, you might have to add the typelib wrapper and assambly to the GAC, bu typing:
Gacutil -i <your C3PO server>
Best Regards
Tommy Mikkelsen
IT Quality A/S
Denmark
Novell Developer Forums SYSOP
Please Report back any success or failure, That way we all learn
Sorry, but no support through email
"I hate bugs".......Tommy Lee Jones, MIB
Be a GroupWiseR, go http://www.groupwiser.net -
I am unable to find instructions on how to add a bookmark. I don't want it on the toolbar
I am unable to find instructions on how to add a bookmark. I don't want it on the toolbar but just in the list of bookmarks. I've tried every which way to search for this information but without success.
Thanks,
D Lapp
Email: <[email protected]>
I removed the email address. It is not needed on the forum to send you replies. The forum is public and indexed by search engines. You may reinstate the email address if you wish. You may also choose to display the email address publicly in your profile use [/users/edit] ->''Make my email public: ''[] ~J99If you want to bookmark the current page, you can use the keyboard shortcut Ctrl+d to add the bookmark.
If you prefer to type the address, or you need to bookmark a page that is not displayed, right-click an existing bookmark on the Bookmarks menu (or in the folder where you want to add the bookmark) and choose New Bookmark.
Is that what you're looking for? -
How can i increase the height of the navigation toolbar to make my persona more visible?
adding toolbars puts them all below the navi bar and it looks weird.
i know this has been asked many times but the answer's always "add toolbars".Look here.
http://support.apple.com/kb/index?page=answerlink&url=http%3A%2F%2Fsupport.apple .com%2Fkb%2FHT1495&answerid=16777216&src=support_site.home.search -
How do I add toolbar? I wanted to go into to view to add a home button but have no toolbar to go into.
View > Show Toolbar
-
How to add download button to safari toolbar?
Does anybody know how to add the download button to safari toolbar?
Here are the steps you've been given in picture form:
Do View menu > Customize ToolBar:
Doing so brings up this:
Find the Downloads icon (in the second row in the image) and drag it to the toolbar. -
How to add push button in report.
Hi,
how to add a push button in the standard list report and on clicking which the line-size of the screen should reduce from 300 to 100.
how to proceed.
Can anyone help me.
Regards
GuhapriyanHii Guhapriyam,
You can ceate PUSHBUTTON in selection-screen like Below
SELECTION-SCREEN PUSHBUTTON 2(10) text-004 USER-COMMAND CL1.
Create a variable to hold the processed PUSHBUTTON value like
DATA v_flag TYPE flag.
The PUSHBUTTON will be processed at the event AT SELECTION-SCREEN. So write your code like below
AT SELECTION-SCREEN.
IF sy-ucomm EQ 'CL1'.
v_flag = 1. "Buttob clicked
ENDIF.
START-OF-SELECTION.
IF v_flag EQ 1.
NEW-PAGE LINE-SIZE 100.
ENDIF.
OR
The best way of doing this by setting PF-STATUS like
START-OF-SELCTION.
SET PF-STATUS 'ZSTATUS'. "Double click on this and set the pushButton in standard toolbar option and in function key specify the BACK, EXIT and CANCEL button .
Then write your logic at the event AT USER-COMMAND.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'RED'.
NEW-PAGE LINE-SIZE 100.
WHEN 'BACK' OR 'CANCEL' OR 'EXIT'.
LEAVE SCREEN.
WHEN OTHERS.
ENDCASE.
regards
Syed -
Urgent ! How to add multiple JToolBars in a single JFrame
How to implement multiple JToolBars in a single JFrame
or what is the concept behind floating toolBars.If anybody can help me ,Thisis very urgentIf you insist on multiple toolbars, use the following code:
JToolBar tb1 = new JToolBar();
//add stuff
JToolBar tb2 = new JToolBar();
//add stuff
//put the toolbars on the top of the window
JPanel toolbars = new JPanel(new BorderLayout());
toolbars.add(tb1, BorderLayout.NORTH);
toolbars.add(tb2, BorderLayout.CENTER);
getContentPane().add(toolbars, BorderLayout.NORTH);Stephen -
? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .
Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl -
How to add button in standard SAP transaction
Hi All,
I would like to know how to add a button in the application toolbar of the standard SAP transaction CO01/CO02. Is there a screen exit for this?
Hope you can help. Thanks
Regards,
AprilCheck Enhancment CCOWB001. If not then u can search the below list, all of which are called from the T-code.
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines -
How to add an image for the new form?
I created a new form,and I want to add an [image] to the toolbar in the new form.How to add [image] for a form?
Like:
[image] File Edit Tool Help
My Form
Thanks in advance!Thank you!
Maybe the message I sent yesterday have some mistakes.
Form version 12.0.5.1
I want it this way:
How to add [image]?
[image] Manager Maintenance
Browser Open Save Help
-- My Form --
----------------------------------------------------------------------------- -
How to add warning message while using 'print' function in Adobe LiveCycle Designer
I am trying to make pdf document for my company which requires adding a warning message while anyone use 'print' function from the page...
Does anyone know how to add warning message on LiveCycle Designer
Also my supervisor mentioned something using 'nag' if that rings any bellNo you shoudl never go into the XML source unless uinstricted to do so.
You can open the script editor (under the window menu). It will appear above the drawing area but below the toolbars. You can resize it if there is not enough room. When you click on an object in the form you can choose an event to script against in the Show dropdown. In your case you will want to choose the prePrint event. A line will show up that indicates the object that is associated with the script as well as the event and other information. Add your script below this line. Once that is done you are finished and your form is ready for testing.
Paul
Maybe you are looking for
-
PDFMaker is not loading in outlook 2013
I have sucessfully installed Adobe Acrobat XI standard on Windows 7 with Office 2013. The add-in function of the pdfmaker is not working in Outlook, it is just not possible to activate pdfmaker - outlook is giving an error that this add in is not loa
-
How to avoid cancellation of invoice for payment recevied
Short Description: Cancellation of Invoice raised on customer after receipt of Payment from him Description: There is an Invoice dated 22.10.2008. We have received the payment for this Invoice vide document number posting date 06.12.2008. So the Invo
-
I keep getting a runtime error on Elements 9. I am over it. I have searched the forums and no body is getting a solution from what I can see. I did nothing to my computer, it just started giving me an error one day and has never worked since then.
-
Hi, My requirement is to validate a particular screen field.......while user enters the value on that field....(i.e) the message should not come after the user action....it should get displayed while entering the value itself.....is it possible.
-
I am attempting to scan on my HP F4280 (which worked fine previously), and am getting a message that I cannot scan because another device has taken control of my scanner. I don't know how to correct the issue and I would appreciate anyone's advice