How to add Total Quantity in Inbound and Outbound Delivery screen

Hi,
I want to add Total quantity field in Inbound and Outbound Delivery screens.
In document flow i can see the line item quantities in ALV Format, but if i select Display the totals above the entry check box
in Change Layout--> Display, i didn't see any totals displayed.
Please help me on this?
Regards
Bhuvana

Hi
If the field is a customer field, see BADI 'LE_SHP_TAB_CUST_HEAD'
Regards
Eduardo

Similar Messages

Single Function module to create inbound and outbound delivery

Dear Frens,
   I would like to know how VL10A is creating a deliverty document in background mode.
   otherwise can anyone help me with a single function module or BAPI or BADI which creates both
   inbound and outbound delivery.
Regards
Priya

Hi,
Try FM RV_DELIVERY_CREATE or GN_DELIVERY_CREATE.
For creating a delivery wrt PO u 1st need to have a sales order i guess.
Regards,
Amit

Delivery document Type of Inbound and Outbound delivery

Hi,
Please suggest standard delivery type for inbound and outbound deliveries.
Regards,
shreya

Hi,
Standard delivery types:
inbound delivery EL
outbound deliveries LF
subcontracting LB
project LP
replenishment NL
returns RE
without ref LO
Regards,
MdZ

How to add fields in custom infotype and update its screens

Hi Experts
I want to enhance a custom infotype ( Add some new fields, and add special function on its screen). This custom infotype is created in previous release. is there any way to add fields in infotype? and let system automatcailly modify corresponding screens to add new fields

Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype

Confirm Inbound and Outbound Delivery, with HU packing

Hi Expert,
Does anybody know some FM(s) for comfirm Inbound or Ountbound delivery with Batch split and Handling unit packing?

This is not an appropriate message for the Web Dynpro ABAP forum. Please choose the correct forum when posting questions.

How to add a button to VL01N Create Outbound Delivery

Hi,
I seen various user exits in this program SAPMV50A (VL01N), but can I enhance the interface by adding a new button (without copying SAPMV50A to ZSAPMV50A, etc)
Dell

Hi
I think you can't do it
Max

How to do IDOC debugging for both inbound and outbound

Hi
can somebody please help me on how to debug the idoc both inbound and outbound in SAP PI.
Regards
Blue

Hi,
Yes, i have checked but did not get any satisfactory answer.
here is the solution:
Inbound:
We19, Give the idoc #,
click on the inbound functional module and select the radio button in the fore ground
check the check box call in debug mode, this will enter in the functional module debugging.
Outbound:
Check BD73, give the idoc # and execute
or
RSNASTED program and set the breakpoint there
is this correct, i have not tested/ checked yet.
Regards
Blue

Sharing Handling Units between Inbound and Outbound Delveries?

Hello-
I could use some guidance with how to best setup a handling unit scenario for a Third Party Purchasing process.
1.) Sales Order for Third Party Purchased Material (Vended Finished Good) is created in ECC.
2.) Purchase Order is sent to supplier.
3.) Shipping Label is generated in SAP and is assigned a Handling Unit. Label is sent to supplier.
4.) Supplier affixes this label to product and ships it to our warehouse.
5.) Goods Receipt is performed via Purchase Order (MIGO).
6.) Warehousing activities and Post Goods Issue of Outbound Delivery are performed via this label and Handling Unit.
We would like to do a few new things with this process.
A.) We would like to have the supplier provide us with the HU on their ASNs and generate a Packed Inbound Delivery from it.
B.) We would like the same HU to eventually be associated with the Outbound Delivery to the end customer.
Is their a best practice to share a Handling Unit across an Inbound and Outbound Delivery?
Is EWM Cross Docking the best way to accomplish this?
Are there other proven approaches?
Thanks for your time and help.
-Ron

hi friend
Handling unit number for identity of packing materail , pallet material carrying the carton ,carton the carrying the material
like FG material and tray
identification number controlling the handling unit numbers.
with regards
dinesh

SAP inbound and outbound delivey in single shipment document

Hi
We are doing outbound and inbound delivery creation in SAP. These are dropped to OTM(oracle transport management system). OTM will create orders for deliveries and groups multiple deliveries into one shipment. This is sent back to SAP for shipment creation. Problem we have is SAP can have either inbound deliveries Or outbound deliveires in a shipment. Based on inbound shipment or outbound shipment in shipment document type. OTM does not has this restriction and can bundle both outbound and inound in single shipment.
Business scenario we have is multi pick and multi drop, where there is possibility that 1) inbound del from vendor for PO 2) Outbound del to customer for SO and 3) outbound/inbound del for STO from RDC to DC in a single sipment.
Please advice ow this can be achieved in SAP.
Best Regards
Edited by: M.N. Phani Sai on Oct 28, 2010 10:34 AM

It is not possible to involve both inbound and outbound deliveries in the same shipment. SAP has its deficiencies...
http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/inbound-and-outbound-delivery-in-the-same-shipment-3512217
http://help.sap.com/saphelp_erp60/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
You cannot place outbound deliveries and inbound deliveries together in the same shipment document. Nor is it possible to assign Items from a delivery or an inbound delivery to different shipment documents. You must decide at the delivery stage whether order items can be shipped together in one delivery and therefore require only one shipment.
Edited by: Csaba Szommer on Oct 28, 2010 11:05 AM

How to add totals for each page in main window

hi
i have problem in scripts
how to add total in first page ending and carry it to second page , at the end of second page again adding total and so on until last page.
very urgent
regards
ratna

Hi,
Check these
http://help.sap.com/saphelp_40b/helpdata/en/d1/8035c3454211d189710000e8322d00/content.htm
http://membres.lycos.fr/jolyeric/SAP/Note_de_Cours_Ben/Sapscript/SAPscript_Control_Commands.doc
try to use the command 'summing' along with one text symbol .Keep the if condtion when page changes at that time u dispay the total as ur keeping the total in text symbol it can be dispayed in the next page
or this is round about way
loop at <table>.
call write_form.
endloop.
here u declare a variable 'c' and increment it by 1 in each loop. Then u chgeck if the program has started printing second page then u can print the number of records before printing the next page.
eg :
data : c type c value '0'.
loop at <table>.
c = c + 1.
call write_form.
endloop.
in form:
check when the next page is being printed, then u can print the number
of lines 'c'.
Feel free to revert back.
--Ragu

In alvs how to do totals by colum wise and row wise

hi,
in alvs how to do totals by colum wise and row wise
could u plz explain clearly with coding

Hi Rajesh,
Go through these links...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
Reward Points if this helps,
Satish

How to add new currency in ORCO and ORBO

Hi, I have successfully install ORCO, ORBO and ORPOS. I followed Implementation Guide, Volume 1 – Implementation Solutions to add new currency in ORPOS.
But I still do not know how to add new currency in CO and BO.
I try to use import parameter feature in ORCO and ORBO to import xml, the result said "Success" but there is no changes.
Please help show how I could achieve this.

I change the FL_CNY_BASE into 1 already. POS is OK now. But BO is not regconize that there is a new currency. I'm trying to go to
Admin -> Job Manager -> Available Import -> Import BackOffice Parameters
and try to import xml file that contain belowing content.
<?xml version="1.0" encoding="UTF-8" ?>
<CurrencyImport xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="CurrencyImport.xsd" Priority="0" FillType="FullIncremental" Version="1.0" Batch="1" CreationDate="2001-12-17T09:30:47.0Z" ExpirationDate="2027-12-17T09:30:47.0Z">

<Currency ChangeType="ADD" ISOCode="MYR" IssuingCountryCode="MY" Name="MYR" IssuingCountryNationality="Malaysian" IsBaseCurrency="true" Scale="2" Priority="0" />
<ExchangeRate ChangeType="ADD" CurrencyCode="MYR" MinimumAmount="0.00" EffectiveDate="2008-05-26" ExpirationDate="2050-06-02" ToBuyAmount="2" ToSellAmount="2" ServiceFeeAmount="0.00" />
</CurrencyImport>
The result said it success but I still cannot see any change.
Is there is any other things I should make change at BO? Any property file that I should make change? BO and CO is web application so the structure of files are not the same as POS. I can't following the same thing when I had made with POS for BO and CO.
Thanks for you helping

How to do an inbound and outbound interfacing using UTL_FILE ?

dear members,
How can we do interfacing from a legacy system to oracle and vice versa using the UTL_FILE package. I mean how to do an INBOUND and OUTBOUND interfacing using utl_file.
regards
sandeep

in/
file/
bad/
done/
out/
file/
bad/
done/
I would start by ftping / putting the file in in/file/ folder, once ftp has completed move it to complete/ folder and process the file. If errorrs are generated move the file over to bad folder. If completed successfully move over to done folder.
Having said that you would use UTL_FILE_DIR init parameter to set your directory.
ALTER SYSTEM SET UTL_FILE_DIR='directory1','directory2' scope=spfile;
Then you would use the regular utl_file packages to read / write to the files.
UTL_FILE.FOPEN and so on.

How to do inbound and outbound interfacing using UTL_FILE?

dear members,
How can we do interfacing from a legacy system to oracle and vice versa using the UTL_FILE package. I mean how to do an INBOUND and OUTBOUND interfacing using utl_file.
regards
sandeep

Hi Sandeep,
I do not know if I got your question correct.
Here is my understanding of it, pls correct me if I am wrong:
You want to read from and write to the OS from inside the DB? Right?
There are differnt waysa to do so, depanding on your Oracle version:
1. you can use the initialization parameter UTL_FILE_DIR to specify a directory on OS where you can read from and write to through the package UTL_FILE.
2. You can use a directory object in the DB to manage read write access to the OS. This is also usable with the package UTL_FILE as location where to read from and write to.
=> CREATE DIRECTORY my_dir AS '/home/oracle/my_directory';
GRANT read , write ON DIRECTORY my_dir TO scott;
SELECT * FROM dba_directories;
You need CREATE ANY DIRECTORY system privilege for this.
You can use directory objects also for external tables.
With these you can read from flat files in teh directory on OS with a select statement as if it were a table inside the DB.
Does this go into the direction you were thinking of?
Hope it helps for the first.
Regards,
Lutz

How to add my html title tag and html meta name and meta keywords

how to add my html title tag and html meta name and meta keywords in iweb 09

Like you will see on Roddy's page iWeb SEO Tool will do the job very easily:
Click to view full size
Click to view full size
It remembers what tags went to which pages so they are easily reapplied when you have to republish.
OT

How to add Total Quantity in Inbound and Outbound Delivery screen

Similar Messages

Maybe you are looking for