How to Add transcation (hrclm001 Claim ASIA - Benefit) to ESS:

Hi Experts,
We are using Tcode HRCLM001, Claim(asia) in the backend, now we are using ESS ep 7.0 but we can't find any service for claim(asia), can somebody suggest me how to add tcode to ess? Thanks
Regards

Hi Hendri Salim,
I got the same issue with you.
Have you ever sovled your issue?
If done, please tell me how you do that.
It not yet, please keep dicussion.
My idea is creating new customized service by tcode SICF.
What do you think?
Thanks and Best Regards,
Minh Khoa

Similar Messages

How do I go about claiming Adobe benefit after cs5.5 creative suite install?

Hi there
I recently installed cs5.5 creative suite and got a prompt to get an adobe benefit.
How do I go about claiming Adobe benefit after cs5.5 creative suite install?
Thanks
Jakub

Hi Jakub Bachniak,
Please share the message that shows up, if possible please attach the screenshot.
Regards,
Gurleen

ESS Workflow for Benefit Claim Asia

Hi expert,
I cannot find standard workflow for Benefit Claim Asia ... can anyone help me here? or does anyone have already made custom one? or find similar one?
regards,
david

Now I set up the portal system. But my problem is that I use Advance Claim for Malay. The page of this service have already shown in the portal. But it can not show the Reimbursement Type andRequest Type.
Please tell me how i can show the Reimbursement Type andRequest Type.
Sincerely,
Minh Khoa

Is Service for Benefit Claim(Asia) exist?

Hi Expert,
I had a nightmare finding that there's no service for benefit claim (asia). My question is same as the title. I m afraid that i forgot something but my basis consultant said that he had already updated the services package to the latest. FYI my system is ECC 6.0
Please help me T_T
respectfully,
David

Now I set up the portal system. But my problem is that I use Advance Claim for Malay. The page of this service have already shown in the portal. But it can not show the Reimbursement Type andRequest Type.
Please tell me how i can show the Reimbursement Type andRequest Type.
Sincerely,
Minh Khoa

How to add new trip schemas in Pr05 Transcation?

Hi Experts,
We have 6 trip schemas for trip provison variant:10.Current only three trip schemas are appearing in "Choose a trip schema" pop up in PR05 transcation.I want to bring all remaining trip schemas also in Pr05.
I have tried to find out the relevant settings in the img node "Define Schema and Individual Field Control" under "Dialog Control", but i couldn't.
Please guide me how to add trip schemas in Pr05 Transcation?.
Thanks,
JA.

Hi Jobish
Can you confirm me how many custom trip schema's you have created?? As you have mentioned earlier as 6, does this Include with the Std Schema's (Domestic Trip,Travel calendar, Travel Planning, Weekly report, Trip Advances)???
Kindly let me know your schema's & come with screen shots of V_T706S or FITVFELD T-code
Cheers
Pradyp

Acrobat X User How to disable Notification "Claim your Benefit Today"

Notification pop up from the
task manager "Claim your benefit Today exclusive for acrobat X 10 user. you can also complete your adobe ID Profile
is there a registy fix to disable
Ron

Ron,
Ever get an answer to your question? I installed the volume license versions of CS5 in my Lab image build and the end users constantly receive the "Claim your Benefit Today" notification and the Adobe ID page. Can't find a way to disable both of them.
-Steve

How to add a customer field or extn coll in the tab1&2&3..of a UDO doc?

Hi Experts,
Does anybody know how to add a customer field or extn collection in the unused tabs like tab1&2...in a UDO document?
Thanks for your reply in advance.
Thanks & Regards,
David

Hi Subhasini - 
It seems you have discovered that adding an extension field to the Project Suppliers collection is not possible; many of the collections in E-Sourcing do not support extensions and, even when they do, typically, the table view of the data cannot be changed to show the extension value (it would only show on a "details" page, for example. 
The solution that you have proposed may work, although I think there is a slight mistake in your logic. I believe you are saying that the script would take data from the newly created extension collection and populate data in the out-of-the-box vendor collection. 
In thinking about your solution, I believe the benefit is that any logic and reporting based on the standard collection continues to function correctly (e.g., creating an RFx from the Project will use the out-of-the-box vendor collection). 
That being said, I generally am reluctant to do a "replace" of a standard collection with an extension collection as you propose. My recommendation is that you challenge the customer on the importance of this requirement. For example, could the code be maintained on the vendor record? Why is it maintained in Projects? If it is maintained in the vendor record, could you just populate a read only collection the Projects that shows the vendor and code? Could a report be written that can be launched from within the Project to show the values? How does the customer intend to use this field? Could the display name of the vendor object be the right place for it? 
I hope these ideas are helpful. 
Regards, 
Rob

How to add fields in subcreen in MM01 in purchasing viewu0092

HI experts,
How to add some fileds ie check boxes in the MM01 transcation wht is the procedure to add the fields and how to give the functionality to tht checkbox.
The added screen will be appearing in the view purchasing only for the conditions WERT materials. example.

Hi,
Try Screen Exit................
Cut and paste the below code in se38 and type the Tcode you will find the Exit and refer table MODSAP
TCODES SMOD, CMOD.
*& Report ZVBUSEREXIT                                                 *
REPORT ZVBUSEREXIT .
TABLES : TSTC, "SAP Transaction Codes
         TADIR, "Directory of Repository Objects
         MODSAPT, "SAP Enhancements - Short Texts
         MODACT, "Modifications
         TRDIR, "System table TRDIR
         TFDIR, "Function Module
         ENLFDIR, "Additional Attributes for Function Modules
         TSTCT. "Transaction Code Texts
*& Variables
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK A01 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK A01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
* Find Repository Objects for transaction code
IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
                                 AND OBJECT = 'PROG'
                                 AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
      SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
      IF TRDIR-SUBC EQ 'F'.
        SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
        SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME = TFDIR-FUNCNAME.
        SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
                                     AND OBJECT = 'FUGR'
                                     AND OBJ_NAME = ENLFDIR-AREA.
        MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
      ENDIF.
    ENDIF.
* Find SAP Modifactions
    SELECT * FROM TADIR INTO TABLE JTAB WHERE PGMID = 'R3TR'
                                          AND OBJECT = 'SMOD'
                                          AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU
                                 AND TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
      WRITE:/(95) SY-ULINE.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 SY-VLINE,
      2 'Exit Name',
      21 SY-VLINE ,
      22 'Description',
      95 SY-VLINE.
      WRITE:/(95) SY-ULINE.
      LOOP AT JTAB.
        SELECT SINGLE * FROM MODSAPT WHERE SPRSL = SY-LANGU AND
                                           NAME = JTAB-OBJ_NAME.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 SY-VLINE,
        2 JTAB-OBJ_NAME HOTSPOT ON,
        21 SY-VLINE ,
        22 MODSAPT-MODTEXT,
        95 SY-VLINE.
      ENDLOOP.
      WRITE:/(95) SY-ULINE.
      DESCRIBE TABLE JTAB.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , SY-TFILL.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
V.Balaji
Reward if Usefull...

How to add empty rows in table in smart form

how to add empty rows in table in smart form?
plz help me regarding this
send me ur queries to [email protected]

You will need to add some extra rows to the internal table that your table is displaying. Use a program node to append additional rows with a key but no argument.
Alternaively a template may me more suitable for your requirement than a table.
Finally, please do not include you e-mail address in your question. Your question and the answers provided to it are for the benefit of everyone in the Community.
Regards,
Nick

HT4356 My printer, Epson Stylus Office TX600FW, is not listed on the AirPrint. How to add it? Would Apple expand the list?

My printer, Epson Stylus Office TX600FW, is not listed on the AirPrint. I can't find it on my iPad or iPhone. How to add it? Would Apple expand the list?

Only the printer manufacturer can make it compatible with AirPrint, it's not up to Apple. You could try Epson's iPrint app, that claims to support that model :
http://itunes.apple.com/us/app/epson-iprint/id326876192?mt=8

How to add fields to already loaded cube or dso and how to fill records in

how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?

This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382

How to add a library (libSomeRandomlib.so) to a project....??

Ok, so I've been trying to get CERN's ROOT program/libraries to work in an xcode project for a while, but I'm running into one really weird error, and I think I may just not know how to add a library to a project correctly.
Suppose I create a new Xcode C++ command line tool project. I hit Build and go, and it gives me a nice little Hello World! in the console, just as it should. If I then click on the project in Groups & Files, go to Project>Add to Project..., and choose, say, libCint.so, from my root/lib directory, and click ok, then click Build & Go, I get an error in the console:
dyld: Library not loaded: @rpath/libCint.so
Referenced from: /Users/paulthompson/Documents/Programming/Build Products/Debug/LibraryIncludeTest
Reason: image not found
sharedlibrary apply-load-rules all
Data Formatters temporarily unavailable, will re-try after a 'continue'. (Cannot call into the loader at present, it is locked.)
My assumption is that either I'm missing a step in the process of adding a library, or else there is something jacked up with the libraries themselves. Anyone have any advice?
Thanks,
Paul
EDIT* Oh, I should mention that the actuall binary that gets built after adding the library WILL execute properly in the Finder, or from terminal, just not with the Build & Go, or Go commands from within xcode.
Message was edited by: TraxusIV

TraxusIV wrote:
Results of otool:
LibraryIncludeTest:
@rpath/libCint.so (compatibility version 0.0.0, current version 0.0.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 123.0.0)
Macintosh-9:Debug paulthompson$ otool -L /Applications/CERNRoot/root/lib/libCint.so
/Applications/CERNRoot/root/lib/libCint.so:
@rpath/libCint.so (compatibility version 0.0.0, current version 0.0.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.2.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0)
I honestly don't know much about @rpath. I found this page that explains it a bit more: http://blogs.sun.com/dipol/entry/dynamiclibraries_rpath_andmac
So, since I don't want to deploy with the environment variable set, I should ask, what IS the correct, MacOS X way to do it?
The best way to find that is to look at how Apple does it. They put frameworks in /System/Library/Frameworks and regular shared libraries in the standard places. You can do the same. Put your frameworks into /Library/Frameworks and your shared libraries into /usr/local-based paths.
If you want to create stand-alone executables that can be installed via drag-n-drop, you can put shared libraries inside the application bundle. If your shared libraries/frameworks are elsewhere, you will need some sort of installer to get them installed.
I've been sifting through Apple's developer documentation but I have yet to find a concise, straightforward explanation of how to add shared libraries. I'm horribly confused at this point. Is there a good tutorial available anywhere for both the general unix case of linking to dylibs and .so's, and the Mac specific case?
Hopefully someone else knows an answer for this one.
*EDIT* I do already have the variable defined both in ~/.MacOS/environment.plist and also in Xcode as an additional user variable.
I'm not sure about the whole RPATH thing. Setting environment.plist will define environment variables for use in the Finder, but that is really a hack. There are better ways to do it, but if you are porting some open-source programs, that may be the only way. You should be able to define those variables in Xcode. You have to selected the debug executable under "Exectuables"

How to add A single row at the middle of the table in a Webi report

Hi,
I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
Thanks in advance
Regards
Monika

Hi Monika,
It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
Can you explain in more detail what you are trying to do?
Thanks

How to create a job card and how to add waranty card in sales order

I have one scenario for CS.the scenario is realted to automotive industry. Basically its a trading industry of HCV,MCV,LCV apart from that they will do servicing also. First the customer comes for a service.he is having free services. he will have waranty for spare parts of the vehicle. once he comes for servicing first the executive will take complains from the customer after that a Job card will be issued to the customer. there his chasis no ,engine no and registration no will be there. once enter the chasis no entire customer details has to come. how many free services he is having for how many kilo meters.then job card will go to the spare parts dept.that dept will issue the spare parts.then they will invoice the customer. he will pay the payment.and finally the gate pass will be given to the customer to deliver the vehicle.
painful area is how to create a job card and how to add waranty in sales order.
Regards,
Venkat

Hi,
Have u resolved it then Please let me know !!! It is a very interesting problem and owuld like to know the solution...
Regards
Krishna

How to add apache to an exisitng BOXI31 presently running on IIS

Hi Tim,
I know its rude that I directly mailed you but i am not able to post on the SAP forum due to some reasons I don't know. So please if you can help me I would be highly indebted.
I have a multiple server installation.
Number of Servers : 4
Number of CMS : 2
Application tier on 2 servers.
Web tier on 2 servers.
The problem is when i login my .NET infoview works fine but my Java infoview doesn't.
I found the error that the CCM doesn't have Tomcat Apache Server.
So my guess is thats the reason why the java infoview is not working.
Please help how to add the Apache to the CCM.
Regards
Sid

Hi,
You need to run custom installation to install Java Web components on your server box and choose to install
tomcat app server
- Subhodeep

How to Add transcation (hrclm001 Claim ASIA - Benefit) to ESS:

Similar Messages

Maybe you are looking for