How to add Two Interface Mappings to One Receiver(BPM) Help needed urgently

I have a requirement where i get a flat file and split into multiple files and send to BPM.
For each split file I created Interface Mapping using Java Mapping Program.
In the Configuration how to add more Interface Mappings?
Thanks for your help in advance.
Regards
Sudha

You can use Enhanced Interface Determination to split one message to Multiple hence to multiple Interfaces.
You have to change the Occurance of Messages in Message Mapping and their Corresponding Interfaces in Interface Mapping. That would create Multiple Files with Multiple Interfaces to Receiver (BPM)
1) You need not to use Multilpe Interface Mapping
2) You will use Extended Interface Determination for this.
regards.
Jeet.

Similar Messages

  • How to add two X Axis in the Column chart?Need Help

    Hi,
    I have a requirement to add two X axis in the SSRS column chart.Can someone please help how to add two X axis. I tried the secondary axis for horizontal axis but current x axis is shifting to other side, second X axis is not coming.
    Regards
    Jon

    Hi Jon,
    According to your description, you want to add secondary X axis for one series in a column chart, right?
    The secondary axis is useful when comparing two value sets with two distinct data ranges that share a common category. In Reporting Services, it’s not supported to create two X axis for one series. We can create secondary X axis when there are two series
    in a column chart. As we tested in our local environment, we can add secondary X axis for specific series. Please refer to the screenshots below:
    So I would like to know what’s your exact needs about creating two X axis for one series. If possible please share some detail information about your data and expected looking of the chart.
    Reference: Plot Data on a Secondary Axis (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu

  • Urgent:how to add two table regions to one query region

    hello
    In my page a serach region is there and for that region i need to add two tables and two are based on two different view objects.how can i implemnet this thing please let me know.
    advance thanks

    Hi Wei Fang,
    You can try by creating a 2 line template (1 Template, 2 linetype) under a loop note.
    So your smartform tree structure will be shown like this:
    LOOP
        TEMPLATE1.
    On the LOOP part, pass the internal table of your data to the working areas.
    On the template put all the data of the summary on your first linetype, and put
    the detail data on your second linetype.
    Good luck and hopefully this will solve the problem
    Edited by: Prawira Fadjar on Oct 22, 2008 10:04 AM

  • How to merge two .mp4 files into one file?---Help!

    When two clients make viedo chats on FMS,FMS saves two clients' audio and video informations into two seperate mp4 files.
    Now I want to get one mp4 file which contaions one cilent's audio and video informations and another client's audio information when recording
    Is there any way to deal with this problem?
    Thanks in advance..

    Hi Tibor,
    Below is the output i got.
    [Tracer_2]<?xml version="1.0" encoding="UTF-8"?><Rowsets DateCreated="2015-04-05T23:22:05" EndDate="2015-04-03T11:10:27" StartDate="2015-04-03T11:10:27" Version="14.0 SP5 Patch 11 (Aug 27, 2014)">
        <Rowset>
            <Columns>
                <Column Description="" MaxRange="100" MinRange="0" Name="col1" SQLDataType="1" SourceColumn="col1"/>
                <Column Description="" MaxRange="100" MinRange="0" Name="col2" SQLDataType="1" SourceColumn="col2"/>
                <Column Description="" MaxRange="100" MinRange="0" Name="col3" SQLDataType="1" SourceColumn="col3"/>
            </Columns>
            <Row>
                <col1>1</col1>
                <col2>2</col2>
                <col3>3</col3>
            </Row>
            <Row>
                <col1>11</col1>
                <col2>22</col2>
                <col3>33</col3>
            </Row>
            <Row>
                <col1>a</col1>
                <col2>b</col2>
                <col3>c</col3>
            </Row>
        </Rowset>
    </Rowsets>
    Please find the image below to achieve this. Please note, I have used local variables to assign input xmls and repeat through it. Repeater_0 for Headers and Repeater_1 for body.
    Kindly ignore Doc_0 here, it's for another purpose. Document_1 is what we are focussing on.
    Please note, you would not be able to see columns as those are dynamically created. Still you can map it as shown above.
    Hope this helps.
    Best Regards,
    Swaroop

  • How to add two different page numbers in a single page

    How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

    It's quite complicated, see
    Two Page Numbering Schemes in the Same Document.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • View Mapping Result between two Interface Mappings in ccBPM

    Hello,
    I've got a ccBPM which does two interface mappings. The second one fails. When I redo the steps manually in the Interface Mapping test mode everything works fine. Anyway, I want to get the message from the failed BPM that got out of the first interface mapping, which worked fine in the BPM as well, before entering the second.
    Where can I get that message? In Monitoring I can only find messages that got sent.
    Thanks for you help!
    Regards,
    Dirk

    Hi,
    Please check in Runtime Workbench.
    Go to Adapter Engine --> Component Monitoring
    Now select your Adapter.
    Use Filter and below you will find message ids.
    select one and you can see the audit log..where your appln fails.
    You can also use SXMB_MONI.
    Select the message giving error and in that goto outbound tab..click on link...select view details image button...select the component with error and go to container tab of it....there you will find trace entry....where log of your error will be stored..
    Hope it helps.
    Best Of Luck
    Akhil
    Edited by: Akhil Rastogi on Mar 18, 2008 11:08 AM

  • How to merge two WD components in one WD application?

    Hi SDN,
    Can any one tell me How to merge two WD components in one WD application?
    suppose i have two WD componets z_comp1 & z_comp2 now i want to use both these components in one WD application.
    Regards,
    Rahul.

    hi rahul...........
              you can use any number of wd components into one component.
    eg:
            consider you are having 2 components 'A' and component 'B' and you want to embed both into component 'C'.
           You can just click the 'Create' icon which will be present in the properties tab of the component controller.
           you mention the name of bothe components 'A' and 'B'.
            So now the interface controller of both the components are created in component 'C'.
           Now you can use the views present in both the components in component'C'.
    --regards,
      alex b justin

  • How to sync two iphone 4s to one itunes account on one PC?

    Hi
    Could you please tell me how to sync two iphone 4s to one itunes account on one PC? I successfully synced my husband's phone to my account ( he got his phone first) but my phone isn't showing up in devices. Very frustrating as he know can listen to all my music and I can't!!
    Thanks in advance

    Try this, How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495

  • How to add two columns in OBIEE report?

    Hi to All,
    Can anyone tell me how to add two columns in OBIEE report and get that result in a new column?
    Thanks in Advance,
    Thenmozhi

    Assume you already have two columns SalesAmt1 and SalesAmt2, and you want to derive 3rd column say SalesAmt3 which would be the sum of SalesAmt1 and SalesAmt2.
    For this, as I mentioned above pull SalesAmt1 and SalesAmt2 columns in Report. Now pull another column (say SalesAmt1) and open the fx. Clear the contents of fx. Now locate the columns button in the bottom of the fx. From Here, first select SalesAmt1 and + sign and the select SalesAmt2.
    Now in this new column, the fx should look like SalesAmt1 + SalesAmt2.
    Let me know if you are looking for something else.
    Thanks

  • How to add Two Columns in SQL

    How to add Two Columns in SQL
    For Example
    Jan Feb
    215 NULL
    How to add these two values in SQL

    Anything + NULL is NULL.
    Check this:
    SQL> SELECT 1 + NULL from dual;
        1+NULL
    SQL> You have to do this:
    SQL> with t as (SELECT 235 JAN, NULL FEB FROM dual)
      2  SELECT NVL(JAN,0) + NVL(FEB,0) FROM t;
    NVL(JAN,0)+NVL(FEB,0)
                      235
    SQL>

  • How to add two zeros end of field

    how to add two zeros end of field?

    Hi srinu,
    If it's a number field, then just multiply by 100.
    If it's a string, then just use CONCATENATE and add the '00' to your existing string.
    Hope this helps.
    SL

  • I want to add image in column is it possible then how to add image in data base what data type we need to do

    I want to add image in column is it possible then how to add image in data base  what data type we need to give we required any casting  please show me one example
    jitendra

    Hi again,
    Several points that can help more:
    1. If you are working with Dot.Net, then I highly recommend read the first link that you got! This is nice and simple coding. Another option is this link which is even better in my opinion:
    http://www.dotnetgallery.com/kb/resource21-How-to-store-and-retrieve-images-from-SQL-server-database-using-aspnet.aspx
    2. As i mention above both link use the column's type image. There are several other option of working with Files. In most of my applications architecture I find that it is better to use a column which let us use any type of file and not an image column.
    In choosing the right column's type for your needs basically your fist question should be if if you want to store your data inside relational database environment or outside relational environment. It is a good idea to look for blogs on this issue. Next
    if you chose to store your data inside then you need to chose the right column type according to your server version. I highly recommend to look for blogs on the differences between those column's types: IMAGE, 
    Check those links:
    To BLOB or Not To BLOB: Large Object Storage in a Database or a Filesystem
    http://research.microsoft.com/apps/pubs/default.aspx?id=64525
    FILESTREAM feature of SQL Server 2008
    http://msdn.microsoft.com/library/hh461480
    FileTables feature of SQL Server 2012
    http://technet.microsoft.com/en-us/library/ff929144.aspx
    Compare Options for Storing Blobs (SQL Server)
    http://technet.microsoft.com/en-us/library/hh403405.aspx
    Binary Large Object (Blob) Data (SQL Server)
    http://technet.microsoft.com/en-us/library/bb895234.aspx
    Managing BLOBs using SQL Server FileStream via EF and WCF streaming
    * Very nice tutorial!
    http://petermeinl.wordpress.com/2012/02/20/managing-blobs-using-sql-server-filestream-via-ef-and-wcf-streaming/
    [Personal Site] [Blog] [Facebook]

  • I buy my iphone 5 in uae but i live in other country i want use a facetime how can add this feature to my iphone 5 please help me

    i buy my iphone 5 in uae but i live in other country i want use a facetime how can add this feature to my iphone 5 please help me

    If you wanted FaceTime, you should not have purchased your phone in the UAE. There is no way to add it back to your phone, as it has been permanently removed.

  • How to enable java script in my Firefox browser? help its urgent.

    how to enable java script in my Firefox browser? help its urgent.

    go to '''about:config''' and search for '''javascript.enabled''' change its value to '''true'''
    *[http://kb.mozillazine.org/About:config about:config]

  • How do I add two FX Styles onto one layer?

    Hi,
    I hope I've come to the right place.
    I have a small problem. I'm trying to add two different FX Styles to a text layer, is this possible and If so, how would I go about doing this?
    I'd like to "merge" these two effects into the text layer.
    I hope I've explained my dilema properly.
    Thank you for taking the time to read this any help would be greatly appreciated.

    What I did was, copy the layer, removed the FX from that layer and added the FX I was looking for onto the copy and presto - I got the layer to look exactly how I wanted it.
    Thanks again, I'll be sure to ask you for any advice in the future if i have any and you're willing to help.

Maybe you are looking for