How to add USB printer to airport extreme

How to setup with utility

You do not use the AirPort Utility to set up a printer if that is what you mean.
You will need a Mac or a PC to setup the printer.
Post back to let us know what you have and what operating system is being used. Also we need to know if your are asking if it is possible to print from your iPad or iPhone. It may or may not be.
Keep in mind that not all printers are compatible with the AirPort Express, so this will be one of those times when you will not know if something will work until you try it.
Also keep in mind that if you have an All-in-One device, only the print function will be supported when the device is connected to the AirPort Extreme. If you need copy, scan, maintenance, etc.....probably best to leave the device connected directly to your computer.

Similar Messages

How do I make iPad add a printer using airport extreme?

How do I make iPad add a printer using airport extreme?

Please check this Apple Support article: Apple Support - AirPrint Setup and Troubleshooting

Can't print from Win2000 to USB printer via Airport Extreme

Background: I have an Epson Stylus Photo 820 printer connected by USB to an Airport Extreme base station. My iMac is connected to the base station via an ethernet cable.
Using Bonjour for Windows 1.0.3, I've set up the Epson printer to print from Win2000 in a virtual machine in VirtualPC 6 which is running in the iMac. The setup process for the printer completed OK, without a hitch. (By the way, I loaded the printer driver from the printer's disk, because the driver for the Epson Stylus Photo 820 isn't one of the drivers selectable from the Bonjour window.)
Problem: When I try to print via the route that I set up using Bonjour, an error message appears, stating:
- There was an error found when printing the document "mhtml.mid://00000047/" to IP-extreme986254.local.9100"\
(Note: extreme986254 is the name of the network I configured in the base station. Otherwise, the network is working OK. Also, my Win2000 in VPC is connected to the internet OK.)
When I re-try printing, I get the same error message.
When I hook the printer directly to the iMac by USB and then set it up as a printer for Win2000 in that configuration, I have no trouble printing to the printer.

Using Bonjour for Windows 1.0.3, I've set up the
Epson printer to print from Win2000 in a virtual
machine in VirtualPC 6 which is running in the iMac.
The setup process for the printer completed OK,
without a hitch. (By the way, I loaded the printer
driver from the printer's disk, because the driver
for the Epson Stylus Photo 820 isn't one of the
drivers selectable from the Bonjour window.)
Though for XP should also work for Windows 2000.
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html
Problem: When I try to print via the route that I set
up using Bonjour, an error message appears, stating:
- There was an error found when printing the
document "mhtml.mid://00000047/" to
IP-extreme986254.local.9100"\
Printing from an Windows 2000 PC to a printer attached to an Airport Extreme Base Station
http://www.ifelix.co.uk/tech/1006.html
iFelix

Printing to a USB printer via Airport Extreme

I recently purchased an Airport Extreme and connected it to an ADSL router using ethernet. The router is then connected to my company network (PC, Windows, hubs etc). On the AE USB port, I also connected a Sansumg ML-1710P printer which works fine if I connect it directly to my Macbook.
I can add the printer (bonjour) but when I order it to print, the job with start and then just stop and the status indicated "error".
Did try several suggestion from this discussion including using the 10.4.7 combo update, update the CPUS to 1.2.1, connect/disconnect, download new driver without success.
Anyone has any suggestion? Thanks.

Normaly this connection the way you describe it won't work.
The Airport Extreme Base Station is a Router as well
It is normaly done from the Internet Service Providers Modem with an ethernet cable to the Airport Extreme Base connected to the little cicle of dots on the back. It is set to distribute IP's and DCHP and then the arrows pointing away from one another is then cabled to the other Router and then plug in the printer to the Airport Extreme's USB and the other computers to the ethernet port on the 2nd Router, and it must be set NOT TO DISTRIBUTE IP'S
Don

Another usb printer-to-Airport Extreme problem

This issue is similar to Tanya Howie's, but involves an HP 5440 printer instead of a Pixma. I have the G4 iBook connecting via Airport to the Airport Extreme, the iMac Snowball hardwired to the AE via Ethernet cable, with the HP plugged in via usb to the AE. I have reinstalled the AE software 7.4.2, the HP software 5.3, and the Airport utility 5.4.2. Also, I connect to the internet via RoadRunner thru Warner Cable.
Occasional disconnects have been cured by resetting everything back up, until recently. Now, when I look at all the places where the printer should appear, I see it listed: in the Airport Utility settings, on the printer setup utility, the File dropdown Print command, in the dropdown Printer box and choosing Bonjour version of the HP, even in the Opening Connection box, which shows the attempt at opening the connection; the connection bar shows an attempted Print, then goes to Job Stopped.
When I run the Print Diagnostics that is in the HP 5440 menu bar, I get a green light on Airport, Airport Settings, Network Settings, ISP, and Internet, but a red light on Server, which also says Failed. If I click Continue and go thru the steps of the diagnostics, the last page says "Cannot connect to server: Networks Diagnostics was able to connect to the Internet, but not to the server 'HP Deskjet 5440 printer.riousbprint.tcp.local' . This could be caused by problems with the server, or an Internet problem between this computer and the server."
Where is this server, and can someone tell me how to address its issues or to find a work-around? And is there a step I have missed? Thanks!

I rolled back to 7.4.1 to try to fix my dropouts and slowdown problems, but that didn't make any difference. So I went back up to 7.4.2, but did the hard reset by
1. unplug Airport Extreme
2. Press in reset button on the back and hold it in while...
3. Plug in power
4. After light on the front started to flash, released the reset button
I then had to reset all the networking settings (password, SSID, etc) but that only took a few minutes and a couple of resets. The network dropouts haven't happened again so I'm hoping that has sorted it. The printers seem to be behaving themselves as well now. I did roll back to 7.3.2 at one point, but then I lost the printers completely with that and Snow Leopard (Leopard was fine though).
There was a posting I found from somewhere that said about setting up the printer using the IP connection setting rather than the automatic one, but I can't remember where I found that. Let me have a quick think...
Ok, I think this was the page (the instructions are very similar anyway)
http://pcworld.about.com/od/networkin1/Bugs-amp-Fixes-Ethernet-net.htm
Good luck.

How to add NAS to existing Airport Extreme Base Station Network...

Hi! I have a Airport Express network (DSL provided via a DSL modem) that is connected to the PC via ethernet, iMac 333 via Wireless adapter, and Powerbook via wireless card. I am bursting at the seams with components!!
I have the printer set up via the AE.
I would like to add a NAS to the works. (Just to see if it can frustrate me even more! )
How exactly would I hook this up? Any suggestions? Has anyone done this? Have a favorite NAS device you can recommend? We are looking to install this for a centralized place to store all our music, photos, movies, etc. We have TONS of digital media to store and it is clogging up our respective hard drives!
Thanks in advance for the help!!
Minder
Ti Powerbook 15 inch Mac OS X (10.4.6) iMac Grape 333MHz, Custom built PC and a Flower Power iMac soon coming home with me too...
Ti Powerbook 15 inch Mac OS X (10.4.6) iMac Grape 333MHz also

It is unclear... Do you have an AirPort Extreme base station (AEBS) or AirPort Express (AX)?
If you have an AEBS then you should have this configuration:
DSL modem<->[WAN] AEBS [LAN]<->PC
If that is your current setup, you would need to modify it by adding an Ethernet switch (or hub) so that it looks like this:
DSL modem<->[WAN] AEBS [LAN]<->switch<-+->PC
.......................................|->NAS

HT1226 how to add security key to airport extreme that was set up without? a key?

How can I add a security to my airport extreme that was set up without one?

ArmlockU wrote:
Will have to have re-set up my airport express or will the extreme just work with the express? I have the express locked down and I thought about unlocking the express? What would I do to set this up? Any help I would greatly appreciate it!!!
You should set up the Extreme as your main router and eventually the Express to stream music or to extend the wireless.
After the Extreme is set up and running, just set the Express e.g. to "Join a wireless network".
Alternatively reset the Express to factory default (see manual) and configure it from the scratch to your needs.
Lupunus

I cannot print from windows xp to a usb printer using airport extreme v5

I just bought the new airport Extreme, loaded Bonjour on a lenovo t400 running win xp sp3.
I can print with the printer plugged in to the computer but cannot print using the bonjour setup. I can print from my Imac connected to the airport extreme (hard wired) and wirelessly from my macbook.
I have no issues connecting to the web through the Airport Extreme with the PC.
I have all the proper drivers installed.
the Printer in question is a lexmark P910 Series and the drivers loaded with bonjour.
Any thoughts on why I cannot print using the PC?
Thanks

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Printing with a USB printer using Airport Extreme and Vista

I have a airport extreme and it prints fine with all of my Macs.
I bought a VAIO installed with Vista and the lastest service pack. Here is what I have done
* Installed Bonjour Printing software on the Windows Machine
* Installed the print drivers on the Windows Machine
* Bonjour finds the printer and driver without any problem
* When I test the printer will print either one page or half of one page and then I get an error message.
* I enabled the UDP 5353 port in the Firewall
The printer is a Epson Photo R220
I have no problems with the Macintosh works great and I have no problems with the Windows machine connecting to the Airport for internet usage.
If anyone out there has a solution I would very appreciative.
Thanks

No help from the forum. I used Bonjour for Windows.

How to setup a printer with Airport Extreme + Express Network

Ok so here's how things are setup. I have an Extreme connected to my cable modem creating the wireless network. I have a PC that doesn't have a wireless card, so I setup an Express next to it. The Express takes in the wireless signal, and the PC is connected to the Express through ethernet and has a successful connection. Next I want to connect my printer to the USB port of the Express and share it over the network. It doesn't work plug and play. From the Airport utility, the express recognizes the printer, however, the computers on the network do not see it. Can this be set up to work? If so, what am I missing?
Thanks

If you are on PC's, you will need to download the bonjour for windows.
just google it.

Can i plug printer into airport extreme while it is on

Can I plug a usb printer into airport extreme while it is on?

I cannot find airport in finder, don't know how to turn it off.
You will have to pull the power plug from the back of the AirPort Extreme to power it down. Wait a few seconds, then plug the cord back in.
Or, you can pulll the plug where the power supply plugs into the wall socket if that is easier.

How to connect my iPad, Brother printer, and AirPort Extreme?

How to connect my iPad, Brother printer, and AirPort Extreme?

I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

How do I install an HP C4100 printer to airport extreme?

I can connect my C4100 via USB directly to my laptop, but I don't know how to install it to airport extreme. When I attempt to print using airport extreme, I get a connection failure. Can you provide instructions? (I am a new MAC user).
Thanks.

Hi there,
this morning I resolved the printing issue with my HP psc 1217 All in one.
I was almost ready to go into the next computer store to buy a airport compliant device when I found this link for more than 600 printer drivers:
http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs#Printers
My psc 1217 is not directly listed, but works well with the drivert for the 1210 device.
the photosmart C4100 is also listed so it should work as well.
What you have to do is:
go to the page: http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs#Printers
1. download the package: Foomatic-RIP (88k) and install
2. download the package: espgs-7.07.1.ppc.dmg (5.4MB) and install
3. download the package: hpijs-2.7.6.U.dmg and install
go to the printer manager and select the driver from the list you will see a bunch of newly installed printers.- Works well for me and allows me to keep my loved psc1217.
Cheers,
Torsten

HP Laserjet P1102 print multiple pages - USB connected to Airport Extreme -

Hello,
My configuration is Windows Vista/7 - Bonjour Print - HP LaserJet P1102 USB connected to Airport Extreme.
Everytime I sent a print job - it get printed endless times until I hit "Cancel" on the print queue.
Help anyone..
Thank you very much,
- eagleputt

Hi gingerjedi,
It's normal with your actual Airport and confirm by Apple, but ...
Only If you see your printer in Airport Admin Utility under Printer :
1) Download and install : http://www.openprinting.org/download/printdriver/macosx/foomatic-rip-2008-01-30. dmg
2) Download and install : http://www.openprinting.org/download/printdriver/macosx/gplgs-8.61-ub.dmg
3) Download and install : http://www.openprinting.org/download/printdriver/macosx/hpijs-2.7.10-UB.dmg
4) Repair permissions with Onyx or with your Install Disk
5) Restart your computer
6) Restart your connection with your Printer (Cable-Power-Connection with your Airport)
7) In Prefs Panes, select Printer ( + ) and install a new Printer
8) Select your indicated Printer in the menu choice. If you have a Name for your Airport, give this Name under Place or Emplacement (excuse, i am French) and select HP Deskjet D2400 Foomatic/hpijs (recommended).
9) And click Done
With this Solution, you can just print. All other software possibilities can not run under the Airport. It is normal.
I think all is ok for you.
Message was edited by: thebuzzman

Trying to add usb printer to my airport express.

trying to add usb priinter to my airport express. Using airport utility on my iphone and it only list add wps printer. I see no add USB printer in utility.

Brad0416-
Search the iTunes App store to see if there is a free Brother printing App. Other Apps like Print n Share will work for non-AirPrint printers, but are not as convenient as using AirPrint. They generally require you to use their own text, mail, browser and photo programs, and do not work from within other iOS Apps. One exception is that some Apps have an "Open In" option, that allows you to open a document in the printing App and then print it.
Another alternative is to use one of the computers to share its printer as AirPrint over WiFi. Printopia on the Macintosh is one program that can do that. For a free solution, search the web for AirPrint Activator. There are versions for both PC and Mac computers. Of course the computer has to be turned on and awake anytime you want to print!
Fred

How to add USB printer to airport extreme

Similar Messages

Maybe you are looking for