How to add UWL iView to TNL

Hi
I am in the process of adding UWL iView to the Top Navigation Level (TNL). Could some please help in doing this. Right now I want this UWL iView only for the Administrators .
Thanks in advance
(points awarded to useful answers)

I found the answer on how to do this. Add the iView to the corresponding role you need.

Similar Messages

How to add Portal iViews with Web Page Composer

Hi,
We are working with Web Page Composer in EP7.0 SP13.
We are creating web pages and we would need to add Portal iViews into. When we try to add an iView, we cannot select it from Web Content Browser to drop into the web page container.
How can we add iViews into our web pages?
Helpful answers will be rewarded!!
Thanks in advance,
Samantha.

Hi,
See these:
[http://help.sap.com/saphelp_nw70/helpdata/en/06/4776399abf4b73945acb8fb4f41473/frameset.htm]
[/message/4414263#4414263 [original link is broken];
Best regards,
Avishai Zamir

How to add PCD iview in web page composer.

I have created an KM navigation iview for user messages.I want to add this iview in web page composer.i tried creating entry point but not able to see any changes in web page composer designer.
Regards,
Atul Dumbre

Hi,
have you executed the steps outlined here?
http://help.sap.com/saphelp_nw2004s/helpdata/en/06/4776399abf4b73945acb8fb4f41473/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/e58347f5546976e10000000a1553f6/content.htm
Important steps are: "Deactivate the Hide in Root Folder checkbox." & "Restart the servlet engine."
How did you configure the entry points provider? sharedcontent=/wpccontent/Cross-Site Content;/documents/MyFolder
br,
Tobias

How to add an iview as a link

Hi,
I have a requirement like i need add an iview (For Ex : Contact Us) as a link at the bottom of the page/currently viewing iview.
Not in a navigation panel as a related links or not as a favourite link, a link should be added at the bottom of a page, so that if i click on that link it should take me to another iview where it displays the content which is present in that iview.
For example i created a iview called Contact Us and i want to have a link to that ivew at the bottom of a page/iview, so once i click on that link it should give me the contact details by opening a Contact Us iview.
Regards,
Pradeep.B

Hi Pradeep ,
There is no way you can achieve this only through portal configurations . You will have to create an iview out of your custom code . Check the page layout section of default framework page ( or the framework page of your app) and there you can place it at any position , say below masthead or below TLN .
Regards
Mayank

How to see the iview in portal favorite

Hi,
It is possible to see the iview in portal favorite without giving content admin role. How to add the iview created in portal to display in portal favorite.
Thanks,
Kundan

Hi,
Your question is not very clear for me....According to my understanding i am replying u.
Portal favourites is itself an iview.
If u want to show some other iview in place of Portal favourites then you need to do some changes in your framework page.
Go to content admin and go to your framework page ---> select Desktop Innner Page
then u can see Portal favourites iview there.
If u want to show some ivew in place of portal favourites, then delete Portal favourites and add the iview which u want to display.
~Raju
Edited by: V R K Raju P on Sep 9, 2009 3:31 PM

How to ADD field in iview ?

hi,
in portal-iview i want to add a field.
when i go to 'portal-content -> open the iview with right click -> preview' and then
do ctrl-alt-right-mouse click i got to the customizing of the fields.
i know how to HIDE fields there, but i don't know how to add fields ? in the list
of the fields the necessary fields are available, BUT i only have to options:
hide -> YES or NOT PERSONALIZED
any ideas ?
reg, Martin

Gopal,
the root element of this fields does NOT have the option 'decorate'.
it is the quoata overview of ESS : sap.com/ess~quotas
the top of the tree has option 'decorate', but this is above the necessary table where
i select the data.
my adrl is
martin.svik(at)denzel.at
maybe we can 'change' some screenshots where you can send me yours and i can
send you mine to explain it in a better way
reg, Martin

How to add 1 more column in standard portal UWL and map the values.

Hi
I have one issue/requirement, please help me out on that also.
In portal UWL, i want to add one more column TICKET ID COLUMN, and ticket id value I will be putting as work item ID of abap Workflow, so whenever approver opens his portal UWL, in first column i want to show ticket ID say 00012345, so how to add this ticket ID column in standard portal UWL and how to put/map value of work item in that column.
My idea behind this is, when ever say employee wants to know the status about his ticket ID, he can simply ask his manager regarding the ticket status by referring to that ticket ID which manager can easily find in his portal UWL in that extra TICKET ID COLUMN .
Do I have to change anything in SAP inbox also ? Do i have to add 1 more colum in sap R/3 inbox also ? and will adding 1 more colum in sap inbox (R/3 inbox), will create automatically one more ticket ID colum in portal UWL also ?
please let me know , as i do not want to add 1 extra column in R/3 inbox, just i want in portal UWL extra ticket ID column should come and i want to put workitem ID generated at the start of workflow, in that colum in portal UWL
please help me on this.
Thanks...
Edited by: User Satyam on May 29, 2011 6:16 AM

Hi Satyam,
These are called custom attributes. Here is a powerpoint that may be able to assist you with the documentation that the other poster gave you too.
Always remember too when you make a change on the backend R/3 side, you must reregister your UWL connector. And yes, the column must be available on the backend R/3 side. We can't create on the fly columns in the UWL, that have no reference to the backend system in this case.
Beth Maben
EP - Senior Support Consultant II
AGS Primary Support
Global Support Centre Ireland
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***

How do i add an iView to portal in Visual Composer 7.1

hello all,
how do i add an iView to portal in Visual Composer 7.1.
any documents related to it, will be very helpful.
thanks in advance.
Santhosh Guptha N

Hi Santhosh,
[Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/visualcomposer/modeling%20portal%20content%20with%20visual%20composer.pdf] you go.
Good Luck,
Dharmi

How-to add a custom Web Dynpro iView to the MSS Employee Profile

Hello everybody,
i have created a small How-to guide of how to add a custom iView/Web Dynpro application to the standard MSS Employee Profile for ECC 6.0.
The How-to guide can be found <a href="https://wiki.sdn.sap.com/wiki/display/profile/2007/04/15/How-toaddacustomWebDynproiViewtotheMSSEmployee+Profile">here</a>
I hope its of any value.
cheers,
Markus

Hello Luca,
unfortunatelly it wont work. A WDA Application does not have access to the Floorplan Manager for XSS Applications. So until SAP develop an interface, you have to stick for such a task to WDJ.
regards,
Markus

How can I add an iView to the Detailed Navigation itself

How can I add an iView to the Detailed Navigation itself and hides the other hyperlinks?

To add an iview on the Detailed navigation side of a page:
1.Double click the page which brings up the page editor.
2.Click the Display dropdown box and choose Dynamic Navigation.
3.Add an ivew to it.Save and add the page to a role to see the results.
if this is not u wanted, post back here.
Regards.

How to add my own iview in Compliance Calibrator

Hi Experts,
can plaese tell me how to add my own iview in Compliance Calibrator 5.1.

Anubha,
If you are trying to add an iview or URL to Compliance Calibrator you have to login as an administrator go into the configuration tab, and go to Custom tabs toward the bottom of the left screen. Here you can add custom URL links that will appear as tabs in Compliance Calibrator.
Hope this helps
Gabe

How to add few more columns in UWL screen

Hi all
Currently by default we are able to see the columns in UWL header as "Subject", "From", "Sent Date" , "Due Date" , "Status" .
now i want to add few more columns apart from standard columns.
can you please let me know how to add our own columns in UWL header ?? if it is XML changes then pls let me know which xml file exactly we need to change??
Thanks
Sunil

Hi Harini
actually Standard XML file is not necessary for changing the column names in the UWL .
we can use otherway as follows.
go to system admin->UWL administration->click to configure item types and custom views using a wizard then it will take you to another screen -> select the radio button "Customize the look of the UWL main page" click on next then you can select what ever task item you want to change and click on the button respective button at the right end then it will take you to new screen there i added new columns what ever required and saved also but the same one is not reflecting in UWL....
can you please check the same in ur machine and let me know if any other things are required to be done and why this not been done our requirement??
Regards
Sunil

GenericCreator: How to add iview as Dynamic Navigation

Hi All,
Had anyone used the "Uploading Content and Actions" into the portal via XML file process to add an iview into a page into the Dynamic Navigation portion which will cause the iview to load up on the left panel of the page.
I am able to do this via the Portal manually, but would like to know how this can be achieve using the .xml and the GenericCreator.

Hi Mary,
What I meant by being able to do this manually in the portal, is the process of going into Content Administrator > Portal Content finding the page that I would like to add the iview into. Selecting the page, executing a Right-Click > Edit-Dynamic Navigation. Then finding the iview, Right-Click > Add to Dynamic Navigation.
This will add the iview into the Dynamic Navigation portion of the selected page.

How to add iView to Page

Hi experts,
currently I have created an iView in the CE 7.1, SP3 environment with Enterprise Portal lite. How to add iView to the Page and subsequently add the Page to the workset?
As now, there isn't a "add" when I right click on iView.
thanks.

Hi,
Here is the help link:
http://help.sap.com/saphelp_nwce10/helpdata/en/1d/ccdf3df2ad685ae10000000a11405a/content.htm
Regards
Srinivasan T

How to get rid of prefix of UWL iViews

Hi all,
In my UWL implementation I wanted to modify a parameter in the uwlSapLaunch iView so that UWL will trigger workitem execution in Windows GUI rather than in HTML GUI. Since I should not touch standard iViews, I copied all the iViews located under Portal Content>Portal Users>Standard Portal Users>Universal Worklist and pasted them (delta link) in my own folder. I also changed the optional UWL config parameter "Path to the UWL iViews" to point to my folder with all the delta link iViews.
The problem with this was that my delta link iViews still had the prefix com.sap.netweaver.bc.uwl, which prevents me from transporting the iViews. So I removed the prefixes of these iViews.
Now when I try accessing UWL I get an error message that shows clearly that it still tries to get to the iViews with the prefix.
Anybody faced this before? How to solve it?
I am on EP 7.00
Any help will be appreciated.
Greetings,
Patrick

hi Patrick,
in order to have a backup UWL, you can export it and save to other location.
and i think in order to have to change the execution from HTML to windows GUI, you just need to create a new i-view which will link to your windows GUI and do some modification in your UWL.
the modification in your UWL will change the link from the standard / old i-view to your new one.
hopes it helps, please award points if helps
regards
eddhie

How to add UWL iView to TNL

Similar Messages

Maybe you are looking for