How to add wagetype to  Layout for remun.statement

Dear Guru
We have created new wage type but the same is not display in already defined
variant , sopl suggest where we can add the wage type to variant
Regard
Vijay

Hi,
After creating the wage type it is mandatory for you to place that in your remuneration statement. (this you already know)
Using PE51 you make changes to the form that is copied from the standard IN01
The form created needs to have the wage types and you add the same using Windows and Cumulation Ids._Please ensure that you add all your wage types to the remuneration statement._
To start the program HINCEDT0 you are using the T Code : PC00_M40_CEDT. 
Once the Program is executed you save the same as a varaint.
Use the varaint for the remuneration statement while running the simulation to check if all your wagetypes are being captured.
All the best to you
Regards
RR

Similar Messages

  • How to add wagetype to RT Table?

    How to add wagetype to RT Table? Experts  Any views on this??

    Hi Priya,
    Transaction Code: PE02
    Menu Path: Human Resources --> Payroll -> Tools --> Maintenance Tools -> Rules
    Use ADDWTE* to add the wage type in RT table.
    Please refer below link for details and example.
    http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=72405
    Regards,
    Supriya

  • How to add a new tab for the project?

    Dear All Experts,
        Could you tell me how to add a new tab for the project?
        Pls refer to the screenshot as below:
    Thanks!
    Xinling Zhang

    Hi,
        The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
        And in cj02, there is no this tab also in the wbs detailed screen,
    Thanks!
    Xinling

  • How can i set a layout for MIGO screen

    Hello all,
    How can i set a layout for MIGO screen. & make that layout default. Like i want to drag Requistioner column next to quantity in MIgo screen. temporarily I can drag but is there a way to save as layout & save it.

    Hi
    First you arrange however you want and then go to table settings which is there in the right corner of the item details and create a variant and save.
    Find a button with blue yellow and white at the top end above the vertical drag bar when put the cursor it will show you as Configuration.
    After creating the variant tick the check box use as standard setting below the variant
    Hope it helps
    Edited by: Girish  Adaviswamy on Mar 3, 2010 1:27 PM

  • How to add a table layout in CRM Sales order?

    dear all ,
    anyone know how to add a table layout in CRM sales order customer tab that using the EEWB added?
    can EEWB do this?   i didn't find the appropriate business object......

    Hi , Swapna
    is you mail address right? can not send out.
    first , you should have added one field using EEWB ,  then to EEWB , find the extension , double click on the task, there  you will find a  "object list"  on the right, the list will give you many many very important  information , you should look through .
    then double click on the "screen:  ..........EEW......." ,  layout , there you will find the field you have added in .  and you can draw anything you want there , then back to the screen flow , write you flow logic in PBO and PAI .
    about the global  data definition,  again to the "object list", you will find a "Report source code:  ......................TOP". in there ,you can define all you data .
    another thing  if you want to save your input field to database tables that you draw (not by EEWB added)
    two ways:
    1. write update table directly  in  PAI module .
    2.  you can use this BADI :  ORDER_SAVE , this is when you save the order to trigger the save action.

  • How to add a search help for a field in Screen Personas?

       I just started learning to use a Screen Personas, and I want to know how to add a search help for a field.
       I found a property in the help document named "IsLookupSupported". Is it the key?  But I saw it was gray in the field I created, and its value is "false". I could not change it.

    Hi, Tamas,
    I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
    CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
    The correct code is like:
    CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
    Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
    Xin

  • How to add my own Layouts

    Hi
    Can anyone tell me where/how to add my own layouts so they
    are available in the New File dialogue?
    I'm on CS3 by the way. I'm sure I managed this way back in MX
    but just can't remember how.
    Many thanks
    Jon

    JonJackson wrote:
    > Can anyone tell me where/how to add my own layouts so
    they are available in
    > the New File dialogue?
    The 32 predefined CSS layouts in CS3 are stored in C:\Program
    Files\Adobe\Adobe Dreamweaver
    CS3\configuration\BuiltIn\Layouts.
    However, I have no idea how you list your own layouts in the
    New
    Document dialog box.
    David Powers
    Adobe Community Expert, Dreamweaver
    http://foundationphp.com

  • Hi All ,How to add a new  field for MEDRUCK if we havea ZMEDRUCK

    Hi All ,
            How to add a new  field for MEDRUCK if we have a ZMEDRUCK
    Req: If I want to add a new field for the following text editor line :
    IN MAIN WINDOW > TEXT EDITOR> SERCH FOR TOTAL_AMOUNT-->
    In that we will have
    &ekko-waers&    &komkfkwrt&
    (currency)       (numerics)
    Pls send the Code to make these changes .Pls its urgent
    Thanks&Regards.
    Bharat.

    Hi
    If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
    If that field is not there in the any of the structures then you can define a variable using define command
    /: DEFINE  &VAR&
    / &VAR&  = <some value>
    or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to add a document type for the residence status GB in infotype 48

    Hi Team,
    How to add a document type for the residence status GB in infotype 48.
    Please answer this  at the earliest.PFA screnshot.
    Thanks
    chris

    I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
    In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
    A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
    When a relationship is created you may watch it also from either end (again INFO is the starting point).
    It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

  • How to add a related content for a particular document in UCM

    Hi All
    How to add a related content for a particular document in UCM. On which table it stores all the related document details. Can anyone suggest me a document which helps me to know how to add related contents for a document
    With thanks and regards
    Anoop

    I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
    In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
    A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
    When a relationship is created you may watch it also from either end (again INFO is the starting point).
    It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

  • How to Add the title name for Graph in Excel

    Dear Friends
                      I am using LabVIEW 8.0.I need how to add the title name for chart in Excel.
    Jayavel
    Solved!
    Go to Solution.

    Do you have the Report Generation Toolkit? If so, the Excel Easy Graph VI has an input for that.
    If you don't have the toolkit then you will need to use ActiveX. Please do a search on how to use ActiveX (there are examples that ship with LabVIEW) to control Excel. There are also lots of example in the Excel thread. NOTE: DO NOT POST QUESTIONS IN THAT THREAD. 
    Ultimately you will need to look up the information in MSDN. 

  • How to add hotmail to mail for Yosemite

    how to add hotmail to mail for Yosemite

    Mail/Preferences/Accounts - click the + sign and add the account.
    Hotmail Settings      See post by Csound1

  • Custom display template - how to add anothe display template for refimement item?

    Custom display template - how to add anothe display template for refimement item?
    I add a new filter_default_custom.html file and want to create new refinement item display template to point to it
    keren tsur

    Not 100% if I understood the question, but if you uploaded your template to the Master Gallery and the corresponding .js file has been created, you can open the refinement config panel and specify the result type you want to map to your custom template.
    http://www.eliostruyf.com/part-1-create-first-search-refiner-control-template/
    Kind Regards
    Bjoern
    http://www.sharepointviking.com
    Twitter: Follow @bjoern_rapp

  • How to set user specific Layout for executing IW38/IW39  report.

    Dear Experts,
    We have 10 users seperatly, For executing IW38/39 transaction they have maintained seperate layouts for executing the reports. While saving layout they have saved the layout as 'user specific' Now some body has chage the settings.
    After changing the setting all are getting same layout.
    Please suggest how to set user specific layout. When user enter the IW38/39 report by default he should get his layout.
    Thanks in advance.

    Create Variant using SHD0 and with Group and assign to particular user's
    Here is the steps
    Creating a Variant Group
    1. Open transaction SHD0, enter the transaction code, and press enter.
    2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
    3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
    Assigning Users
    Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
    1. Return to the Standard Variants tab page, Variant Groups sub tab page.
    2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
    3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
    You can use this procedure of user assignment for all other users that you want to add to the variant group
    Hope this helps.
    Thanks
    S.N

  • Urgent: How to create a new layout for portal lightframeworkpage

    Expert,
    I want to create a new layout for  external facing portal. I have created a new par project also in NWDS, but being new I do not know where to get "com.sap.portal.layouts.default.par" and other supporting libraries.
    Need an urgent help.
    Thanks in advance
    -Lave Kulshreshtha

    Hi,
    Look into this blog to know, how to write custom layouts:
    Nuts and Bolts of the External Facing Portal (EFP)
    Once you wrote your layout jsp, then declare it in portalapp.xml like this:
    <component name="example_narrowWide">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="2 Columns (Narrow:Wide)"/>
            <property name="com.sap.portal.pcm.Description" value="two-column layout displaying the narrow column on the right"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld"/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="*yourLayout.jsp*"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="Left Column">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="Right Column">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
    As all the layout taglibs and required classes are in com.sap.portal.pagebuilder application, you should refer to it in your portalapp.xml SharingReference property.
    Try all this and if you have specific questions, let me know.
    Regards,
    Praveen Gudapati

Maybe you are looking for