How to add wps network by pin code in airport 6?

i can do that in airport 5 by choosing base station->add wireless net work.
however i can not find it in airport 6.
i don't mind apple to simplyfy general operation, but maybe it should provide some methods to advance operations

You might want to let Apple know what you want.
Apple - AirPort Extreme - Feedback

Similar Messages

How do i enter a sony tv wireless pin code into airport extreme?

How do I enter a sony tv wireless PIN code into airport extrme / time capsule?

If you have upgraded to Lion 10.7.3, you will need to download and install AirPort Utility 5.6 for Mac OS X Lion
If you are still using Leopard or Snow Leopard, you can use the version of AirPort Utility that is already installed on your Mac
Open Macintosh HD > Applications > Utilities > AirPort Utility
Select the AirPort Extreme
Click Manual Setup
Shift the focus of your eyes away from the window in the center portion of the screen and move the focus all the way up to the very top of the screen where the Help, Window, Settings menus are located
Click on the Base Station menu
Click Add Wireless Clients and proceed

How Can i Apply my BBM Pin Code

How Can i Apply my BBM Pin Code for my Blackberry z10, i am live in pakistan please help.

Hi and Welcome to the Community!
Sorry, but even with all of the years of experience I have with BB, I cannot understand what you are asking for. Can you try again please? Perhaps describe the exact steps you are attempting, and exactly what happens at each step.
Thanks and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to add a custom PL/SQL code for a button event handler

Hi All,
I am a toddler in using Oracle Portal. So please forgive me for my ignorance.
Q : How do I add a custom PL/SQL code for a button event handler?
Basically, I would like to write MY PL/SQL function and call it. I could see that we can write "CUSTOM" code as "PL/SQL button event handler" in the form design window. But the question is that it expects only a "call" to procedure. But where do I define the procedure then? If I insert the procedure from the backend, it gets flushed the next time I compile my form.
Hope I am able to explain my point.
Thanks in advance,
Abbas.

Hi All,
I am a toddler in using Oracle Portal. So please forgive me for my ignorance.
Q : How do I add a custom PL/SQL code for a button event handler?
Basically, I would like to write MY PL/SQL function and call it. I could see that we can write "CUSTOM" code as "PL/SQL button event handler" in the form design window. But the question is that it expects only a "call" to procedure. But where do I define the procedure then? If I insert the procedure from the backend, it gets flushed the next time I compile my form.
Hope I am able to explain my point.
Thanks in advance,
Abbas.

OpenScript/How to add .jar file to Java Code in relative path

Hi all,
I want to add a .jar file which can be executed separately (like "java -jar A.jar") to my recorded Java Code.I've read this wiki http://everest2.us.oracle.com/wiki/Generic_JAR_Project about how to add a .jar file to "Assets", however, I cannot figure out how to use the .jarr file in Java code,I mean , how to get this .jar file like the method the databank added in "Assets"?
Things I did are as followed:
1.Execute my .jar file in OpenScript Java code with absolute path like this:
String cmd = "C:\Users\A.jar";
Runtime.getRuntime().exec(cmd);
This does work, but must set a absolute path in Java code like "C:\User\A.jar" ,which is not the workaround I want (I need my scripts can be run on other machines).
2.Try to get its current path with following codes:
File directory = new File(".");
String currentPath=directory.getCanonicalPath();
However,though this can get its absolute path (which is the the project path) in Eclipse like "C:\Users\Workspace\testProject", this only gets "C:\OracleATS\openScript" in OpenScript.
I thought to copy my .jar file to the project path , got its current path in java code first,then can know the path of .jar file, but this workaround failed because of the above reason.
I notice that in the "Assets" there are "Databanks","Object Libraries","JAR Files","Scripts". Since the databanks and scripts that added to "Databanks" and "Scripts" can be got or run in Java Code like:
*getDatabank("DatabankName").getNextDatabankRecord(); String data = eval("{{db.DatabankName.data}}");*
*or getScript("ScriptName").run();*
*Is there a method to get and run the jar file added to "Assets\JAR Files" like the above?*
Thank you very much!
Regards,
Angyoung

Hi DM,
Thanks for your reply!
I've found a workaround,which is calling OpenScript's APIs ,such as this.getScriptPackage().getRepository() and this.getScriptPackage().getWorkspace(),etc to locate the .jar file.
And this workaround can still work even though the script is run on other machine.
Sorry to reply you so late!
Regards,
Angyoung

How to add Document group in t code S_ALR_87012082 for dynamic selection.

Hi Gurus,
I Need to add Document group in t code S_ALR_87012082 for dynamic selection.
Currently here two groups are showing , Vender and Comp Code. i need to add Document group there. Kindly guide me in this.
Thanks in advance.

Hi
Pls follow below report
*S_ALR_87012103 - List of Vendor Line Items *
In dynamic selections you can find Document number, there you can give the range
Reg
Vishnu

How to add a Journal Entry - Error "Code undefined"

Hi, i want to add a simple journal entry by using DI-Api. The problem is, i always get the error message "Code undefined" when I use the Debitor-AccountCode.
My code is like that:
oJ.TaxDate=dTaxDate;
oJ.AutoVat=BoYesNoEnum.tNO;
oJ.Lines.AccountCode="2000";    //Customer
oJ.Lines.ContraAccount="4020";
oJ.Lines.Credit=dCredit;
oJ.Lines.Debit=dDebit;
oJ.Lines.TaxDate=odTaxDate;
oJ.Lines.ShortName="23121089";
oJ.Lines.LineMemo="Ausgangsrechnung";
oJ.Lines.Add();
oJ.Lines.AccountCode="3500";   //VAT
oJ.Lines.ContraAccount="23121089";
oJ.Lines.Credit=dCredit;
oJ.Lines.Debit=dDebit;
oJ.Lines.TaxDate=odTaxDate;
oJ.Lines.ShortName="23121089";
oJ.Lines.LineMemo="Ausgangsrechnung";
oJ.Lines.Add();
oJ.Lines.AccountCode="4020";
oJ.Lines.ContraAccount="23121089";
oJ.Lines.Credit=dCredit;
oJ.Lines.Debit=dDebit;
oJ.Lines.TaxDate=odTaxDate;
oJ.Lines.ShortName="23121089";
oJ.Lines.LineMemo="Ausgangsrechnung";
oJ.Add();

Hi,
Here is the code to find the BP account number:
oRecordset = ((SAPbobsCOM.Recordset)(oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)));
                    oRecordset.DoQuery("SELECT [LinkAct_3] FROM [dbo].[OACP]");
                    oRecordset.MoveFirst();
                    if (oRecordset.EoF == true) // We have a Error
                        oCompany.GetLastError(out vmp_B1_Error_Code_int, out vmp_B1_Error_Message_string);
                        SBO_Application.MessageBox("Add-On Error (Forgestik Inc.): ERR-789 \n " + "Cash Account does not Exist "+ vmp_B1_Error_Message_string, 1, "Ok", "", ""); // My Error Code
                    else
                        vm_CachAccountNumber_string = Convert.ToString(oRecordset.Fields.Item("LinkAct_3").Value);
...Then you have to use the system account number "_SYS00000000353" not the displayed account number in B1...
Thank you,
Rune

How to add an icon for ok code at the bottom of the screen.

hi,
I have designed a screen with a table control.
I want to have at the end of the screen a ok and a cancel button.
For example in menu painter on top we have a icon for going back, exit etc.
At the same way at the bottom of the screen i need to have a tick icon. How to add it at the end of the screen.

Hi Josephine
Please proceed as below:
1. SE51.
2. Change the layout.
3. Add 2 pushbuttons at your desired location.
4. Double click on each button for Attributes.
5. In the attributes, give the Name, Text.
6. Select the Icon Name from the list: Eg: ICON_OKAY and ICON_CANCEL.
7. Go back to layout.
8. Save & Activate
9. Now you can test the screen to check the icons displayed in the screen.
Hope this helps.
Kind Regards
Eswar

How to add observable behaviour in existing code?

Hi everyone, I'm new to design patterns. I have an existing numerical analysis package that I use to find roots using multiple strategy (bisection, secant, newton, etc). I want to show the process of root finding for every iterations taken by the algorithm (for example, iteration 0: left = 0, mid = 0.5, right = 1; iteration 2: left = 0, mid = 0.25, right = 0.5; ... etc. Its not exactly like that, I want to show it graphically, but you see what I mean). Looks like I need Observer to add event handling to notify the change of state in each initial guess as well as signaling the event when a root is/isn't found. But the solver classes doesn't seem to be implementing Observable, they just give out the answer, or not. How do I add Observer pattern without modifying the original code? I thought about using Decorator and having the real solver do the root finding but it just doesn't make sense to me. Thanx in advance.

endasil wrote:
georgemc wrote:
endasil wrote:
georgemc wrote:
That won't get you intermediate results, though.If the method being observed needs to be firing multiple events per invocation, no, it won't.
@OP, you were on the right track with the decorator pattern (indeed, that could be just as appropriate). What made you think it was wrong?I think that's the OP's tripping point:
I want to show the process of root finding for every iterations taken by the algorithm
...But the solver classes doesn't seem to be implementing Observable, they just give out the answer, or not.
Aha. Bytecode weaving (or plain old decompiling and nicking the source) then.Nope, I didn't. You're just too damned fast!For my own good! I hit "post" and immediately go "I forgot to say X" :-/
@OP: if you want to see some examples of using bytecode weaving to introduce observableness to existing code, have a look at the sources for a test coverage tool like Cobertura. That's basically what they do. If you've never done it before, it'll take you a fair bit of head-scratching and sideways thinking to get your head round it all, but stick with it. Be prepared to learn a bit about opcodes as well. Or maybe just plundering the sources for this library is the way to go, not that I'm advocating that ;)

How to add Business area in t code S_ALR_87012082 for dynamic selection.

Hi Gurus,
I need to add Business area field in T-code S_ALR_87012082.
On choosing dynamic selection, i found that Business area is not there.
Can any one please tell me how can i add Business area field over there.
Thanks in advance.

Please check following SAP notes for this.
188663 and 832997 and 310886

How to Add Transport Value in TAX CODE

Hi Experts
I define the code BED 8 %, Ecess 2 % HEC 1 % & VAT 4% but i want to add Transport value in that TAX CODE.SO could you tell me How to define the Transport Value in these Tax Code.
Regards
Amol

Hi Amol ,
Pls make the tax code accordingly
As per your querry
There are two options in the row level activate the Freight 1 Freight tax , frieght total
say suppose
item is X, unit price 100 quantity is 10 then total is 1000 and tax code is BED 16 ecess 1 cess 2 and cst 4% so your total is 1211.39 and if transport charges is 20 and the tax code is same.
Do make the new Tax Code change in the formula base amt which is your freight amount
Hope this helps
Ashish Gupte

How to add my 1 year premium code

Hello , i recently received a code for a 12 months subscription for premium on skype.
When i add the code i get this message : Sorry, you have reached your monthly voucher redemption limit. Please try again later.
I never added any code or anything else to skype. Please help .
Thank you in advance.

Hi,
Check this link , it's PPT how to contribute
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f5d32b1-0c01-0010-4590-9ccd7d0cba4c
for more details check this link
ABAP Frequently Asked Questions
Salil..

How to add dynamic pulldown to this code ?

I have a form that will gererate up to 10 line items for entry when a button is clicked. My partial code is below. Everything works fine. What I am trying to do now is to replace the condtion code manual pulldown list with a dynamic list. When I try that, my button to add more line items does not work anymore.
Can someone show me how to replace the manaul pulldown with a dynamic one, so that it will continue to add extra lines ?
<cfloop index="x" from="1" to="10">
<tr id="row_#x#" <cfif x GT 1>style="display:none"</cfif> >
<td class="TitleText" align="center">
<select name="conditionCode_#x#">
    <option value="A">A</option>
    <option value="F">F</option>
<option value="H">H</option>         <===== Need to replace this part with dynamic pulldown
<option value="U">U</option>
</select>
</td>
<td class="TitleText" align="center"><input type="text" name="materialNumber_#x#" id="materialNumber" size="40"></td>
<td class="TitleText" align="center"><input type="text" name="quantity_#x#" id="quantity" size="8" value="0"></td>
<td class="TitleText" align="center"><input type="text" name="unitValue_#x#" id="unitValue" size="8" value="0.00"></td>
<td class="TitleText" align="center"><input type="radio" name="snFlag_#x#" id="snFlag_#x#Y" size="1" value="1">Yes
<input type="radio" name="snFlag_#x#" id="snFlag_#x#N" size="1" value="0">No</td>
<cfif x GT 1>
<td class="TitleText" align="center"><input type="Button" value="Delete" onclick="hide()"></td>
</cfif>
</tr>
</cfloop>
</table>
</td>
</tr>
</table>
</center>
</cfoutput>
<br>
<input type="button" value="Add Another Material Number" onclick="show()">
<br>

Hi Olivia,
I'm not quite sure if you're only refreshing the drop down as the page refreshes, or dynamically (i.e. many times without the page refreshing). If it is the former, the code below should work fine. If you need it truly dynamically, I'd bind the code through a function/cfc that will populate the select.

<cfquery name="getSelectOptions" DATASOURCE="#DSN#" >
        SELECT blah...blah...select options
        FROM blah...blah...table
</cfquery>
   
   <CFSET totalRows = (getSelectOptions.recordcount+1)>
     
   <CFSET getCategory = QueryNew("Category", "VarChar")>
   <CFSET newRow = QueryAddRow(getCategory, totalRows)>
     
   <CFSET temp = QuerySetCell(getCategory, "Category", "", 1)>
     
     <cfset temp = QuerySetCell(getCategory, "Category", A, 2)>
     <cfset temp = QuerySetCell(getCategory, "Category", F, 3)>
     
   <CFSET counter = 4>
   <CFLOOP QUERY="getSelectOptions">
      <CFSET temp = QuerySetCell(getCategory, "Category", Category, counter)>
      <CFSET counter = counter+1>
   </CFLOOP>

Your new query is getCategory, and/or whatever you call it.
To make this bindable, wrap it in a function, declare a var, use cfreturn to return getCategory.
good luck!
cfwild

How to add a new character in code page

Hi,
I need to add a new character to existing code page in the upgraded system.
The character is latin small s with caron (u0161 ).
The character ID is 000161.
What is the byte sequence of the same?
Thanks and Regards
Shraddha

Use tranaction SCP .
Under segment , take the character sequence and include your new id value . Byte sequence in my opinion will be confirmed from the client .
Br,
Vijay.

How to add a table to my code

I have the following code attached but I am having trouble trying to figure out how to attach a table to it. I would like for my result to give me a graph, as it does, as well as a table. I have been reading a lot and going over many examples but can't seem to figure this one out. Can anyone help? Thanks
Solved!
Go to Solution.
Attachments:
program.doc ‏33 KB

First, your images are on your hard drive and obviously we have no access to that. Attach them to the post.
Your problem is fairly simple. An XY graph is a bundle of an x array and a y array. A table is a 2D array of strings. You can use the Build Array to create a 2D array from your x and y data and then convert to strings with the Number to Decimal String. In the image below, I also inserted a Transpose 2D array so that the x data would be in one column and the y data in another. If you want it displayed in rows, don't transpose.
Message Edited by Dennis Knutson on 12-12-2008 11:49 AM
Attachments:
Create Table.PNG ‏3 KB

How to add wps network by pin code in airport 6?

Similar Messages

Maybe you are looking for