How to add Z module after realtionship creation in pp01 ?

Hello I am using pp01 transaction for relatationship management. And I need to put some my own code when the relationship was created. Do you any way how to do that ? Is it possible ?
Thank You.

Hi Kernel
You can use the method BEFORE_UPDATE which is available in the BADI HRBAS00INFTY. This gets triggered when you save the record.
Regards
Bala

Similar Messages

How to add Substitution fields after prerequisite (in step)

Hi,
Can anybody help me how to add substituion fields after prerequisites.Any configuration steps would be helpful except sap help.com.
Thanks&regards,

Hi,
I am sorry , i hope, my question was not clear to u. In OBBH i have created Substitution, Then created prerequistites, For that prerequisites i want to add substitutions(for fulfilled requirements).
Substitution
   step
      prerequisite
          substitution fields
HOw to create the aboue substituion fields, or any configuration could you please provide me.
Thanks in advance,
Veena

How to Add function modules to retrieve current month

how to Add function modules to retrieve current month from TVARV variables (currently we have functions to do close month).

Hi
Double click on the CODE for the line..
SET PF-STATUS 'XYZ'.
It will open the Menu Painter (SE41). Click on the Function Keys Tree Node and And assign the
Function Keys and Function codes for the Menu Items.
Hope this would help you.
Murthy

How to add new tab after reason for rejection tab using tcode va01

Hello,
how to add new tab after reason for rejection tab using tcode va01.

Hi,
You can check this link...
Hope it will be helpful to you.
[https://forums.sdn.sap.com/click.jspa?searchID=23016273&messageID=6825861]
[http://www.sapdevelopment.co.uk/enhance/fexits.htm]
-Maharshi
Edited by: Maharshi Vyas on Mar 3, 2009 12:45 PM

How to add these modules?

Hi everyone, how can i add these modules listed below? I tried to query them but can't find them. Are they part of another module or what?
•     General Ledger
•     Accounts Payable
•     Fixed Assets
•     Payments & Collections
•     Accounts Receivable
•     Cash & Expense Management
•     Project Costing
•     Project Billing
•     Purchasing
•     Self-Service Procurement
•     Sourcing
•     Procurement Contracts
•     Supplier Portal
•     Inventory Management
•     Reporting
•     HR
•     Cost Management
•     Product Master Data Management
•     Order Management
If someone can help me figure out how to get these added I would really appreciate it.
Thanks!

Hussein Sawwan wrote:
Please post the details of the application release, database version and OS.
Hi everyone, how can i add these modules listed below? I tried to query them but can't find them. Are they part of another module or what?Where do you want to add them?
You can check if those modules are licensed from OAM -- http://docs.oracle.com/cd/E18727_01/doc.121/e12894/T202991T469980.htm#zzbegin
If you want to add the responsibilities, navigate to System Administrator > Security > User > Define, query your username and assign the responsibilities.
Thanks,
HusseinI'm sorry, I didn't word my post correctly. I'm running 12.1.1, db 11gR2 11.2.0.2 on OEL 5.7. I installed with Vision Demo Database
What I meant to ask is how do I add those responsibilities to a user. When i query the names listed above. I can't find a match for most of them.

How to add a module in application

Hi All,
I want to add a new module in application. In Database it is OK. But in application i upload the new module in prodappl folder. But how to set his TOP Plse suggest.
Many Thanks
Ghanshyam

Hello,
What is the database and applications versions?
Additionally please see the following threads;
https://metalink.oracle.com/metalink/plsql/f?p=200:27:4314145935944948375::::p27_id,p27_show_header,p27_show_help:199619.995,1,1
Oracle Metalink: How to add a new module to existing 11i installation. Doc I.D. 199619.995.
https://metalink.oracle.com/metalink/plsql/f?p=200:27:4314145935944948375::::p27_id,p27_show_header,p27_show_help:230513.995,1,1
Oracle Metalink: install 11i all modules? Doc I.D. 230513.995.
https://metalink.oracle.com/metalink/plsql/f?p=200:27:4314145935944948375::::p27_id,p27_show_header,p27_show_help:645423.995,1,1
Oracle Metalink: how to install only needed products? Doc I.D. 645423.995.
Adith

How to Add Carriage Return After PageBreak using XSL code?

Hi,
I have created one RTF Template for Check printing. My requirement is to print check on next page if total number of invoices exceeds certain value.
I achieved this and used below condition in my RTF Template.
<xsl:if xdofo:ctx="inblock" test="count($invLines)>=$lpp"><xsl:attribute name="break-after">page</xsl:attribute></xsl:if>
"lpp" is global variable whose value is set at the start of template. Now i also want to add some space after pagebreak in my Template.
Like presently, check prints at the top of page, so i want to print it after leaving 9-10 lines blank.
Can anyone please help me to achieve this?
Thanks
Amit

Hi,
I tried below syntax but its working only for first page, its not giving space for second page
<xsl:if xdofo:ctx="inblock" test="count($invLines)>$lpp"><xsl:attribute name='space-after'>700pt</xsl:attribute></xsl:if>
I want to combine it with page-break. Like i need specific space only after page break. I tried to combine both, but its not working. Any inputs on these?
<xsl:if xdofo:ctx="inblock" test="count($invLines)>$lpp"><xsl:attribute name='space-after'>100pt</xsl:attribute>
<xsl:attribute name="break-after">page</xsl:attribute></xsl:if>
Thanks
Amit
Edited by: user11982820 on Apr 14, 2010 5:52 AM

How to add (FYI Notification) After the last approver?

Hi All,
I want to add FYI notification after the last approver action, for example after the absence leave confirmation I need the supervisor to be notified that his employee has an approved vacation with the details.....
Regards

Hi Ayaz,
The Allow FYI Notification is a parameter provided by Oracle. Also we have standard Transaction Types defined by Oracle.
By default the Allow FYI Notification is set to No at all levels. To enable the FYI Notification for a particular transaction type (say Self Service) , we need to enable this at the transaction type level.
Once you set the value for Allow FYI Notification 'Yes' at transaction type level; when you would create a rule, you will get a option to select 'FYI Notification' or 'Approver' at Rule level.
Note: The FYI notification will not display the entire contents of the Transaction. It will just display the subject line.
Regards,
Murtuza K.

How to Add additional Module to SAP NETWEAVER TRIAL

Hi! Everyone,
I'm completely new to SAP, I was able to install the above subject with its GUI and working perferctly fine, however is it possible to add additional modules such as Logistics, Procurement and sales? Thanks in Advance

Hello Albert,
If it's a trial Netweaver, maybe it's not possible.
Generally you use SPAM or SAINT tcodes to add more packages.
Maybe SAP NetWeaver Administrator will be able to help you.
Jude

How to add an event after ALL the components of an animation(incl. symbols)were created and played?

I would like to add a button/trigger that goes back to the beginning of the animation when all the elements of my composition, including symbols which have their own timelines and trigger buttons, were created and drawn/played. It should be independent of the main timeline.
Is there any way to do it?
Thanks!

Can a click event handler be added to the stage to control symbols that are on the stage? Like this question How to add a symbol event handler (on click or on mouseover) on the stage timeline
Basically we are looking for way to load in a bunch of instructions at run time, instead of having to individually control each individual symbol.

ALV , How to add a Field after it has been deleted

Hi,
I am formating a ABAP Webdynpro ALV: I remove a field by using :
    l_value->if_salv_wd_column_settings~delete_column( lv_field_name).
How will I be able to add the field again ?
I tried the following :
    l_value->if_salv_wd_column_settings~CREATE_COLUMN( lv_field_name).
but getting a 'null' object reference in the following standard code :
if ls_column-r_column->r_cell_editor->visible_fieldname is initial.
Regards

Hi.
After create_column method you have to create cl_salv_wd_uie_text_view object:
data:
    " Variables para configurar los ALVs.
    lr_alv_config_table type ref to cl_salv_wd_config_table,
    lr_lr_wd_table_usage TYPE REF TO if_wd_component_usage,
    lr_wd_table          TYPE REF TO iwci_salv_wd_table,
    lr_table_settings    TYPE REF TO if_salv_wd_table_settings,
    lr_column_settings   TYPE REF TO if_salv_wd_column_settings,
    lr_column            TYPE REF TO cl_salv_wd_column,
    lr_text              type ref to cl_salv_wd_uie_text_view,
    lr_header type ref to cl_salv_wd_column_header.
" Initialize variables
lr_lr_wd_table_usage = wd_this->wd_cpuse_alv_1001( ).
if lr_lr_wd_table_usage->has_active_component( ) is initial.
    lr_lr_wd_table_usage->create_component( ).
endif.
lr_wd_table = wd_this->wd_cpifc_alv_1001( ).
lr_alv_config_table = lr_wd_table->get_model( ).
lr_column_settings ?= lr_alv_config_table.
lr_table_settings ?= lr_alv_config_table.
" Delete Column.
lr_column_settings->delete_column( 'OBJID' ).
" Create column.
lr_column = lr_column_settings->create_column( 'OBJID' ).
create object lr_text.
lr_text->set_text_fieldname( 'OBJID' ).
lr_column->set_cell_editor( lr_text ).
" Change the header of the column.
lr_column->GET_HEADER( receiving value = lr_header ).
if lr_header is bound.
    lr_column->delete_HEADER( receiving value = lr_header ).
endif.
lr_column->create_HEADER( receiving value = lr_header ).
lr_header->SET_TEXT( exporting value = 'Objid Field' ).

How to add new fields in message creation screen

Hi All,
My requirement is to add another 2 fields in the message creation screen.
Also I found this link is bit useful.
Add custom fields to Support Message
Can anyone share the detailed procedure to add a field in the message screen.
Thanks in Advance.
Regards
Narasingam. B

Hello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S.

How to add an action after closing a ModalInternalFrame?

Hi folks
I created a ModalInternal Frame:
tableMif = new ModalInternalFrame(
getString("ifikPatList"), this, tableP);
tableMif.putClientProperty(CLOSE_ON_F1, true);which is being closed when I push F1. But additional to this, I want some other code being executed at this point.
What do I have to do?
Obviously I need to add some kind of listener which reacts on pushing F1, but I have no clue what type of Listener I need to use, much less how it has to look like.
I'm glad for hints, which let me solve this "problem" for myself
Thanks in advance
Edited by: rueh on Oct 8, 2008 5:16 AM

One additinoal qeustein - How to place the generated tab somewhere on the View? Now it's just placed at the bottom...
This qustion is answered - I just have to change the root element for cl_wd_dynamic_tool=>create_table_from_node

How to add VIS Demo after installing APPS without it??

Hi all,
I have installed Oracle Applications wihout VIS Demo and now i want to add it. How can i do that?? Is there a script to do that?
Tks,
Paulo.

Cannot be done. You must select the Vision install during the initial installation.
Loading Vision DB on existing install
Re: Loading Vision DB on existing install

[Solved] How to add missing module?

I have just installed a second build of Arch on my laptop (first: Arch686, second: Arch64). Once through the installation process I rebooted but upon startup it tells me missing bcm43xx module. The module was available during installation but did not get installed with my install. Not sure what I missed out during installation process... Anyway, is there a way to install the missing module without having to go through the install process again and where would I get it from?
BTW: 'modprobe -l | grep bc' does not list the module, hence I am sure its missing/not installed.
Last edited by schimpfj (2008-08-23 09:22:06)

Ooops. I have used an old parameter from my current installtion - although I do not use it (!bcm43xx). My mistake. b43 is loaded. Strange I still cannot see wlan0 when I do 'ifconfig', but should be able to sort this.
Thanks for your kind reminder!

How to add Z module after realtionship creation in pp01 ?

Similar Messages

Maybe you are looking for