How to adjust bluetooth headset volume in mediapla...

Hi,
I've a problem with lovely E75. I just got a new bluetooth headset (HBH-IS800 SonyEricsson) without any volume control. In a normal call the volume adjust works perfect, but in the mediaplayer the volume is to loud even if I press the lower buttom to it says 10% in the display.
I also have the same problem with systemsounds (lika SMS) that plays in the BT headset, they are to load.
Is it possible to change the output volume from this media applications? I cant find any help in the manual or menusystems.
Rgds
Olof
Headset:
http://www.sonyericsson.com/cws/products/accessories/overview/hbh-is800?lc=sv&cc=se

I beg to differ. If SE implements the basic BT protocol set and Nokia will recognize this, and connects, then Nokia's work is done. Nokia is not required to support SE headset but is required to support the BT standards. The idea is to get you to purchase an SE phone over a Nokia phone and vise versa. To not understand this is to miss out on the basics of business fundamentals. 
While it may be a great headset, personally I like the fact that I can use my much better headphones (Shure SE 530's) with the Nokia BH-214. I had the SE HBH-DS220 but got rid of it because it too had a very strange BT protocol that would not allow it to connect until music was streaming from the phone. The guys at the SE shop acknowledged this as normal behavior between manufacturers. If you do not believe this, go to and SE shop, or Nokia, or both and ask them to explain it to you.
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4

Similar Messages

  • How to set Bluetooth headset as a default answering device in iphone?

    How to set Bluetooth headset as a default answering device in iphone?

    All you need is to pair it.
    http://support.apple.com/kb/TS2225

  • Anyone know how to fix Bluetooth headset not working properly after iOS 8 update?

    I have an iPhone 5S and I use a Plantronics PLT M20 model bluetooth headset. I am no longer able to answer calls by pressing the button on the headset, since updating to iOS 8. I also also cannot end calls by pressing the button on the headset. This only happened after iOS 8. The Apple Care rep stated that "this is most likely a problem with the bluetooth manufacturer and they need to update their firmware, so now it's just a waiting game until they do that". Is that correct? Anyone encountering this?
    Related information....
    Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri. Since updating my iPhone five us and my iPad air, I've been scrambling to access the "raise to speak" option for Siri without success. When I called AppleCare, the representative stated I should have that option to enable in my settings. When I explained to her that the option is not showing, she wanted me to reset my phone to factory settings. When I told her I googled the issue and found that it may have been removed in iOS 8… She put me on hold, Came back and told me I was right.
    What's worse is that that my Bluetooth headset is no longer working with my iPhone 5S. She stated that it may being I needed adjustment from the manufacturer of the headset– Plantronics. All I know is that the apple care representatives seem confused and I am extremely disappointed in this really impacts my use of Siri and my phone.
    When I asked her to submit feedback to her supervisor or the powers that be… I was simply asked to submit feedback to the Apple.com website. While I understand Apple might read that feedback, I also recognize that they don't reply and I don't feel that is great support to someone like me who has a disability and needs a solution. The"Hey Siri" option is not working for me.
    Does anyone have any workarounds for the "Raise to speak" problem or the Bluetooth problem? Specifically, the Bluetooth issue is when I try to hit the button on my Bluetooth headset to answer a call or end the call. It's a Plantronics PLT M20 model.

    Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly.  I purchased a Jawbone MiniJambox to use as a speaker phone in my office.  Everyone in our company thinks they are the best.  However, it is experiencing the same issues as with all my other Bluetooth headsets.  Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices.  The Bluetooth patio speakers in our courtyard also have the same issue.  However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues.  Apple says it is a problem with my Bluetooth device.  Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers.  You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
    On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB.  The vehicle entertainment center had complete control of my iPhone and iTunes.  However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center.  Again when I called Apple, they said my vehicle entertainment center needed a firmware update.  Are you kidding me...  That is a bunch of BS...!!!

  • N95 Bluetooth Headset Volume Control

    Hi,
    I've got an N95 and a Jabra BT135 bluetooth headset. I love the phone and they work well together, except for one problem. Every time I make a call I have to turn the volume up full. Is there any way I can set the phone to return to full volume automatically each time I make or receive a call using the headset ?

    Have a look here: http://www.nokia.co.uk/A4221246
    What I suggest is that you get one that Nokia has defined as compatible, I have one that came with my Nokia 8800 Sirocco, the Nokia Bluetooth Headset BH-801 and it doesn't work properly, sound quality is awful, however its not listed as being compatible with the N95.
    Shunts...
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • How to adjust the sound volume in small increments in Mac OS 10.7 (Lion)?

    I use a Macbook that has dedicated sound volume buttons (F11 and F12).
    In Mac OS 10.6 I was able to adjust the sound volume in smaller increments (1/4th of a square) by pressing SHIFT + OPTION + VOLUME UP/DOWN.
    This stopped working after the update to 10.7. Any ideas?

    Unfortunately they did away with this feature in Lion.  Hard to understand why.
    You can with something like AudioHijackPro manage your System sound to a much higher degree. A very versatile piece of software.

  • Nokia 2680 - How to adjust message tone volume?

    How do I adjust my message tone volume in the Nokia 2680? All I see is the ringing tone volume.

    the standard alarms cant be changed volume wise you nrrd to select louder tone here is link for good loud one
    http://mosh.nokia.com/content/531DDB2B1F444F31E040​050A45300E79
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • How to unpair bluetooth headset during charging

    I have an old Jabra BT500 and a iphone4.  One thing I really like is that the Jabra BT500 unpairs while it is charging.  But the sound quality was ok.  So I recently upgraded to the Plantronics Voyager Pro+ and discovered the new headset doesn't unpair while charging, it is always connected. 
    I also tried another headset and had the same issue.  I'm wondering if the newer headset has this new default behavior.
    Any ways to get the original behavior or is this a specific issue with the Voyager?

    Yes, all headsets do disconnect if you manually unpair or turn off bluetooth.  But I want this automated.
    With the BT500, I have this scenario
    BT500 paired with iPhone 4 and working properly
    After I'm done using it, I connect BT500 to the power plug for recharging
    BT500 automatically unpairs (.ie no bluetooth connection).  This also saves battery on the iPhone.
    If I need to use the BT500 again, I unplug the power and the BT500 automatically pairs and reconnect.
    With the Voyager Pro+ (and another newer headset), #3 doesn't work.  It doesn't automatically disconnect.

  • How to charge bluetooth headset?

    How do i charge the bluetooth hedset

    How about use whatever charger it probably came with and plug it in.
    It likely uses either a mini or a micro USB connection, so if you have the cable, it may charge off a computer USB port as well.

  • How to adjust in call volume

    when i use my phone and make a call the person that im talking to sounds muffled. how do i adjust?

    Unfortunately they did away with this feature in Lion.  Hard to understand why.
    You can with something like AudioHijackPro manage your System sound to a much higher degree. A very versatile piece of software.

  • How to adjust indivudual track volumes temporally

    This is probably an easy one, but I have no idea how to change the volume of individual tracks temporally. It's really easy in imovie, but as far as I can tell, you can only edit the master track temporally in garage band.
    Please tell me I'm wrong!
    Thanks
    Andrew

    no volume change is permanent, use the track fader, you can always change it back again, but if you mean with a volume curve, search GB's help for "curve"
    Thanks, but the help section doesn't say how to add a pan curve; it just says what it does.
    {quote}You can change the volume of a track or project over time using a volume curve. You can add a volume curve to any track, including the master track.
    After you add a volume curve to a track, you add control points to the curve at the points in the timeline where you want the curve to move to a new value. The curve changes evenly between the previous and next value, raising or lowering the volume level between the two points.{quote}

  • How to cancel bluetooth headset in the middle of a telephone conversation

    When driving in my car my BB connects via bluetooth to the hands free kit in the car.  When the phone rings I can answer and converse hands free no problem.
    Sometimes I want to cancel the hands free function and continue the conversation using the BB as the handset.  How do I do that without disconnecting the call?
    Thanks in advance for your help.
    Dwayne

    Hit the menu key and while in the call and select the option that says activate handset and it will transfer from the bluetooth to the handset.....

  • How to adjust FaceTime speaker volume?

    When making Facetime calls, it's too loud and I can't lower the volume, neither the volume buttons nor the volume slider in control center work.

    Look at your applications/utilities/  Audio MIDI setup.app and see if this helps.
    Audio Hijack Pro.app will capture your system audio for a lot more control

  • How to adjust volume of Airport Express speakers on Apple TV?

    Hello,
    I've just setup my Apple TV (bought in November 2012).
    The latest version of the firmware allows to select AirPort Express speakers as default audio output. This is great.
    While watching Youtube videos or listening iTunes music, I can't find how to adjust the output volume.
    I am forced to set it by using the speaker remote control which is quite frustrating.
    Any clues?
    I've attached a photo of the Apple TV screen while playing a Youtube video. There's an output selector. But I can't access the volume options.
    Thanks a lot!

    Hit "up" two times to bring up "movie menu", then hold down "select", then navigate up and over to "speakers" tab, then down to your "AirPlay speakers", then move slider to right to increase volume
    DONE!!
    found it here so i dont deserve the credit but you guys should know - i struggled with this for hours wondering why the streamed audio was so low
    https://discussions.apple.com/thread/2600145?start=120&tstart=0

  • How to adjust volume on Audio Timelines

    A couple questions about volume adjustment on the various Audio Timelines on Premiere Pro CS 5.
    1) How to adjust volume level of an mp3 on the Audio 2 timeline?
    2) How to adjust or mute volume of an 'individual' video clip on the Video 1 and Audio 1 timeline? (I have many clips on the timeline and know how to mute them all, but in this case, I'm looking to only mute certain clips in the timeline.)

    Along with the material covered in the Help File, that Ann linked to, see this ARTICLE. It goes into a little more detail on the differences between Clip Keyframes and Track Keyframes (generated with Audio Mixer). While the effect of those can be the same, there are nuances, that one should make note of.
    Good luck,
    Hunt

  • How to adjust volume iPhone 4 for conversations?

    How do I adjust volume on iPhone for conversations?

    If you don't know how to adjust the iPhone volume, you REALLY need to read the iPhone User Guide:
    http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

Maybe you are looking for