How to adjust brightness of part of the screen of shot video

Hi,
I have a video I am editing and for the most part the brightness and contrast levels are fine. But when I pan to a LCD display which is part of the video, the brightness is way too high. I can't redo this clip, but am wondering if there is a reasonable way to apply a filter which just lowers the intesity of the LCD screen while leaving the surrounding areas alone. It would sort of be like the concept they chroma keying does (in a loose sort of way).
thanks!
'mark

Doesn't always work the way you think it should but you could try dropping the Broadcast Safe filter on the entire clip.
You could also just cut the clip where the brightness first appears and add the 3 way Color Corrector. Adjust it to where you like it and then add a disolve between the clips. (may or may not do it for you depending on how the bright spot comes into frame, but it's a fast workaround) Could keyframe the 3 way in if you like.
There are other things you can do with the 3 way to limit it's effect but to get a grip on it you should probably refer to the manual.
rh

Similar Messages

How do I add web part in the event receiver after the site is provisioned in SP 2010?

How do I add web part in the event receiver after the site is provisioned in SP 2010?

You try the below steps:
1. Use long operation to provision the site, so that it does not time out in process.
2. After provisioning, you can add a page or add the web part directly to landing page of site.
For each of the above steps you can find the sample code pieces.
if you couldn't get that, let me know. I will share with you.
Thanks, Ashish If my response has helped you, please mark as answer.

My ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it

my ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.

Hi my iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?thanks

hi my
iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?
also recovery mode shows up as a red icon instead of a blue one, not jail broken or had any third party alterations
thanks

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

How can I make a part of the body of my content full width of the screen with a fluid grid layout in CSS? (In dreamweaver program)

How can I make a part of the body of my content full width of the screen with a fluid grid layout in CSS? (In dreamweaver program)
and I know it is being over-ridden by
.gridContainer {
width: 88.5%;
max-width: 1232px;
padding-left: 0.75%;
padding-right: 0.75%;
margin: auto;
clear: none;
float: none;

Abdelqader Alnobani wrote:
How can I make a part of the body of my content full width of the screen with a fluid grid layout in CSS? (In dreamweaver program)
and I know it is being over-ridden by
.gridContainer {
width: 88.5%;
max-width: 1232px;
padding-left: 0.75%;
padding-right: 0.75%;
margin: auto;
clear: none;
float: none;
Logically a structure something like below should work BUT whether or not it will upset the FG I don't know as I wouldn't ever use it.
<div class="gridContainer">
Top Code Section Goes Here
</div>

<div id="fullWidth">
Full width section goes here
</div>

<div class="gridContainer">
Bottom Code Section Goes Here
</div>

How can I copy a part of the picture and paste this piece on top of another part of the same picture? ta

How can I copy a part of the picture and paste this piece on top of another part of the same picture? ta

select the section you want to copy (marquee tool or lasso tool) and either go to edit copy or use control c create a new layer in layers (top menu bar) or Control shift N and paste using control V; or edit > paste.

The bottom part of the screen is like bright it looks all weird i cant see annything in that part my ipod still has the 1 year warranty do u guys think i can get it fix for free or would i have to pay?

The bottom part of the screen is like bright it looks all weird i cant see annything in that part my ipod still has the 1 year warranty do u guys think i can get it fix for free or would i have to pay?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. If you iPod is defective, within warranty and not abused, Apple will exchange it at no cost.

In inches, how high is the part of the screen actually usable?

In inches, how high is the part of the screen actually usable for text or images?... on the new iMac Apple computer models.
In inches, how wide is the part of the screen actually usable for text or images?...
Message was edited by: dsaklad@ zurich.csail.mit.edu

You use [Pythagorean theorem|http://en.wikipedia.org/wiki/Pythagorean_theorem]
!http://upload.wikimedia.org/math/1/4/5/1455314a78f39a594485adbaf74d63f9.png!
to calculate how many pixels would go along the diagonal, C in the equation. You know A and B from the resolution numbers.
Divide that pixel number (C from above) by the diagonal measurement in inches to get the +pixels per inch+ number (PPI).
Divide the horizontal and vertical resolution numbers by the PPI number, to get the measurements in inches.

When I went to adjust the brightness on my phone, the screen went black. I have tried everything...resetting, turning off/on, charging, and restoring. I can see the "unlock" page and the "passcode" page, but when I enter the passcode, it goes dark again

When I went to adjust the brightness on my iphone, the screen went black. I have tried everything I can think of and have read online to try....resetting the phone, turning it off/on, charging the phone, and restoring the phone. I can see the "slide to unlock" page and the "enter passcode" page. When I enter the passcode, the screen goes dark again. I can't even answer calls. What should I do now?

If no change after restoring the iPhone as a new iPhone or not from the backup, the iPhone has a hardware problem.

How do I print a part of the front panel?

I am interested in printing a part of my front panel as one page instead of printing the entire front panel. Does anyone know if this is possible? Thanks!

Hi Nes,
This is the second time you are posting a variation on this question.
I was about to so NO YOU CAN'T...
but then I thought...
It is possible to print just parts of a front panel but it is a lot easier to do the things others have suggested.
If you really want to print just a part of the FP you will have to do a lot of coding and the GUI will do some strange things in the process.
I will outline the process and leave the code as an exercise for the reader.
Using property nodes determine where on the FP the objects of interest are located.
Again using property nodes, move the objects around on the FP so that they are grouped together and sized such they fit on a printed page.
Using property nodes adjust the screen size origin etc so only
the objects of interest are now visable.
Using.....nodes print only the visable part of the screen.
Using....nodes put everything back where is was when you started!
Like I said, this is not easy.
The simplest solution was suggested by BJD who said group the objects of interest on a tab page, use an invoke node to get the image and then display it on the FP of a sub-VI set to print on completion. That method will let you quickly add new interesting objects to the print out without having to change the sub-VI.
Trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I quit my iPhoto screen that as crashed and locked on. The locked screen has no iPhoto file list on the left and the part of the screen that should have uploaded photos is blank except for the rotating download icon in the centre of screen. Help?I

My SD card reader has caused my iPhoto screen to be locked with no list of files on the lefthand side and a blank main photo area apart from the rotating download icon operating in the centre of the photo part of the screen.
I have tried to quit iphoto but when I restart it the same locked screen appears.
I believe I caused this problem when I removed my SD device without first ejecting it when the blank screen appeared without downloading my new photos.
Can anyone help a 66 year old computer illiterate fool ?.
Regards

Use Force Quit (under the Apple menu at the top) to close iPhoto. Then try opening it again. If it locks up again force quit and try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists.
If the problem does not persist try the following: make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If the problem persists in the test library do the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

How do i zoom into a part of the screen during playback in QT 7.6.6?

I'm analyzing my racing vid from this past weekend and would like to zoom into a part of the screen and cant seem to figure this out.
Any help is appreciated.
Thanks, Joe
QT 7.6.6 Pro
Windows xp pro
crappy HP laptop but I can go to my desktop Mac Pro

There is no feature in QuickTime Player to zoom into a part of the screen. You can change the size of the full frame (using the options under the View menu or by just dragging the QT Player window larger), but that's the only "zoom" type capability that exists.
Regards.

How do i fix my ipod when the screen cracks

how do i fix my ipod when the screen cracks

Have Apple, a third-party place or fix it yur self.
Apple - Support - iPod - Repair pricing
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
DigiExpress.us - The iPad Repair Professionals
iPod Touch Glass Replacement

Is it possible to use a part of the screen area

Maby a silly question, but has anyone an idea how to play a game for example on a partial area of the hugh 27inch screen? Is there a utility that places full screen applications like games within a window (games that don't have a window mode on its own)?
It seems to me it would be practical (especially) for children to use just about 20inch on the lower part of the screen when playing games with quick moving objects.
tnx

The variable "name" is a lot less important than you think. In fact, when your code is compiled, the computer doesn't care one jot about the name of the variable.
You should not worry about trying to do this, but rather should tell us the reason why you would even want this. If we knew that, we could show you a better way, guaranteed.

How to adjust brightness of part of the screen of shot video

Similar Messages

Maybe you are looking for